Content Index State Failed - After every restart on 2010 mbx server

I noticed that everyone is saying just to run the catalog only command on any database that gets
Contnt index state failed after a restart. but what if you are faililng over 30database and 20 of them get corrupted? run this commadn 1 by 1? really?

Thanks
wawoodwa , this command solved my problem!!!
On other sites I found command:
"Update-MailboxDatabaseCopy –Identity ‘DB2’ –CatalogOnly" it was not working, I got the same error as OldSchoola.

Similar Messages

Content index state: Failed

Hi.
I have been restoring the entire Windows after a bigger problem in the past. However, there were data for Exchange server at a completely different disk which was not affected.
But now I can not load up OWA and when you look in the ECP so says the following under databases "Content index state: Failed"
I have tried to repair it but without any success.
The operation couldn't be performed because object '0747478411\MAIL-SERVER01' couldn't be found on 'server'.
+ CategoryInfo : NotSpecified: (:) [Update-MailboxDatabaseCopy], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : DD4CF704,Microsoft.Exchange.Management.SystemConfigurationTasks.UpdateDatabaseCopy
+ PSComputerName : mail-server01
Update-MailboxDatabaseCopy "0747478411\MAIL-SERVER01" -CatalogOnly
All i have in owa now is
something went wrong
Sorry, we can't get that information right now. Please try again later. If the problem continues, contact your helpdesk.

Hi Jesper,
Thank you for your question.
By my understanding, we should not simply recover window system, we should performance a disaster recover for Exchange by the following link:
https://technet.microsoft.com/en-us/library/dd876880(v=exchg.150).aspx
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Exchange 2013: Content Index State Failed

I am running two, two node DAG's with Exchange 2013.
One DAG pair is running 5 databases with Server 2012 Standard and the second DAG pair is running Server 2008 R2 SP1 Standard with a single shared database.
No matter what I try, ALL 6 databases show "ContentIndexState: Failed" with "ContentIndexErrorMessage: An internal error occurred for the database or its index.".
I have tried rebuilding the indexes manually, automatically and manually copying the database files between servers. I also receive errors when trying to failover the databases because the content index state is failed.
In my test environment I have a very similar setup working fine with no issues.
Please let me know what I can try to get this resolved.
The error I receive when running the following set of commands is:
suspend-MailboxDatabaseCopy dag2db1\mbox1
update-MailboxDatabaseCopy dag2db1\mbox1 -deleteexistingfiles
[PS] C:\Windows\system32>update-mailboxdatabasecopy dag2db1\mbox1 -deleteexistingfiles
Confirm
Are you sure you want to perform this action?
Updating database copy DAG2DB1\MBOX1 on server MBOX1
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"): a
WARNING: Seeding of content index catalog for database 'DAG2DB1' failed. Please verify that the Microsoft Search (Exchange) and the Host Controller service for Exchange services are running and try the operation again. Error: Therevwas no endpoint listening
at net.tcp://localhost:17063/Management/SeedingAgent-0A2745DF-4522-42AB-9115-5DDE9EDEF1C612/Single that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details..
[PS] C:\Windows\system32>

Hi Folks,
Here we go;
"On
August 14th, we announced the removal of the
MS13-061 Security Update for Exchange Server 2013 due to an issue where the patch changed settings for the search infrastructure, placing the content index for all databases into a failed state. As of today, we have released updated security updates
for both Exchange 2013 RTM CU1 and Exchange 2013 RTM CU2."
Details below;
http://blogs.technet.com/b/exchange/archive/2013/08/27/now-available-updated-release-of-ms13-061-security-update-for-exchange-server-2013.aspx
Yavuz Eren Demir
After installing this patch (Exchange2013-KB2874216-v2-x64-en.msp) seeding of the databases was impossible.
Error:
warning
Seeding of content index catalog for database 'Database02' failed. Please verify that the Microsoft Search (Exchange) and
the Host Controller service for Exchange services are running and try the operation again. Error: Could not connect to net.tcp://localhost:3863/Management/SeedingAgent-F293698C-B2D0-40CA-A2C3-FB37982E708712/Single. The connection attempt lasted for a time
span of 00:00:02.0592000. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:3863. .
Looking at the two services mentioned in this warning I've noticed the Microsoft Exchange Search Host Controller (HostControllerService)
was disabled
After Changing it to Automatic and enabling it, the problem was salved

Content Index State: Failed and Suspended Exchange Server 2013

On my passive Server "Content Index State" mailbox database is still Failed and Suspended for almost a week.
Actions Taken to Resolve the Issue:
- Update-mailboxdatabasecopy
-Delete the exisiting folder of database on passive server and run database copy on EAC
Still got FAILED AND SUSPENDED content index state.
Need some advice guys..
Thanks!

Hi,
Please check the following article and see if it can resolve your problem.
https://support.microsoft.com/kb/2807668
Please check the active database, make sure the content index is healthy. If possible, please rebuild content index of active database. And then reseed passive database copy to check result.
Best regards,
Belinda Ma
TechNet Community Support

Content Index State Failed - Exchange 2010 2 Node Dag

Hello,
Last night I needed to restart one of my Exchange 2010 DAG nodes. I moved all Active Database copies of this node to the other node in the DAG. I then restarted the node with no Active Database copies. When the server came back up I moved
the Active Database copies back onto the node that they were initially on. The node that I restarted now shows the ContentIndexState of all Databases as "Failed". Test-replicationhealth gives the following results:
[PS] C:\Windows\system32>Get-MailboxDatabaseCopyStatus -Server S01
Name                                          Status
CopyQueue ReplayQueue LastInspectedLogTime   ContentIndex
Length    Length                             State
DB01-MS01 (A-B)\S01                     Mounted         0         0
Failed
DB02-MS01 (C-D)\S01                     Healthy         0         0
1/26/2011 9:57:40 AM           Failed
DB03-MS01 (E-G)\S01                     Healthy         0         1
1/26/2011 10:02:38 AM         Failed
DB04-MS01 (H-J)\S01                     Mounted         0         0
Failed
DB06-MS01 (M-N)\S01                     Healthy         0         0
1/26/2011 10:02:25 AM         Failed
DB07-MS01 (0-P)\S01                     Healthy         0         0
1/26/2011 9:57:17 AM            Failed
DB08-MS01 (Q-R)\S01                     Mounted         0         0
Failed
DB09-MS01 (S-T)\S01                     Mounted         0         0
Failed
DB05-MS01 (K-L)\S01                     Mounted         0         0
Failed
DB10-MS01 (U-V)\S01                     Healthy         0         0
1/26/2011 10:01:59 AM          Failed
DB11-MS01 (W-Z)\S01                     Healthy         0         0
1/26/2011 9:57:50 AM           Failed
[PS] C:\Windows\system32>Get-MailboxDatabaseCopyStatus -Server S02
Name                                          Status
CopyQueue ReplayQueue LastInspectedLogTime   ContentIndex
Length    Length                             State
DB01-MS01 (A-B)\S02                     Healthy         0         0
1/26/2011 10:00:36 AM Healthy
DB02-MS01 (C-D)\S02                     Mounted         0         0
Healthy
DB03-MS01 (E-G)\S02                     Mounted         0         0
Healthy
DB04-MS01 (H-J)\S02                     Healthy         0         0
1/26/2011 10:02:29 AM Healthy
DB06-MS01 (M-N)\S02                     Mounted         0         0
Healthy
DB07-MS01 (0-P)\S02                     Mounted         0         0
Healthy
DB08-MS01 (Q-R)\S02                     Healthy         0         0
1/26/2011 10:02:32 AM Healthy
DB10-MS01 (U-V)\S02                     Mounted         0         0
Healthy
DB11-MS01 (W-Z)\S02                     Mounted         0         0
Healthy
DB05-MS01 (K-L)\S02                     Healthy         0         0
1/26/2011 10:02:21 AM Healthy
DB09-MS01 (S-T)\S02                     Healthy         0         0
1/26/2011 10:01:33 AM Healthy
[PS] C:\Windows\system32>test-replicationhealth
Server          Check                      Result     Error
S01          ClusterService             Passed
S01          ReplayService              Passed
S01          ActiveManager             Passed
S01          TasksRpcListener         Passed
S01          TcpListener                  Passed
S01          DagMembersUp           Passed
S01          ClusterNetwork            Passed
S01          QuorumGroup               Passed
S01          FileShareQuorum            Passed
S01          DBCopySuspended            Passed
S01          DBCopyFailed               Passed
S01          DBInitializing             Passed
S01          DBDisconnected             Passed
S01          DBLogCopyKeepingUp         Passed
S01          DBLogReplayKeepingUp       Passed
I appreciate any help. Thank you.
R

[PS] C:\Windows\system32>Get-MailboxDatabaseCopyStatus
Name                                          Status
CopyQueue ReplayQueue LastInspectedLogTime   ContentIndex
Length    Length                             State
DB01-MS01 (A-B)\01                                 Mounted
0         0                                  Healthy
DB02-MS01 (C-D)\S01                               Healthy         0
0           1/28/2011 11:05:45 AM Healthy
DB03-MS01 (E-G)\S01                               Mounted         0
0                                  Healthy
DB04-MS01 (H-J)\S01                                Healthy
0         0           1/28/2011 11:07:50 AM Healthy
DB06-MS01 (M-N)\S01                               Healthy         0
0           1/28/2011 11:02:12 AM Healthy
DB07-MS01 (0-P)\S01                                Mounted
0         0                                  Healthy
DB08-MS01 (Q-R)\S01                               Healthy         0
0           1/28/2011 11:09:08 AM Healthy
DB09-MS01 (S-T)\S01                                Mounted
0         0                                  Healthy
DB05-MS01 (K-L)\S01                                Mounted
0         0                                  Healthy
DB10-MS01 (U-V)\S01                               Healthy         0
0           1/28/2011 11:02:53 AM Healthy
DB11-MS01 (W-Z)\S01                              Mounted         0
0                                  Healthy
[PS] C:\Windows\system32>Get-MailboxDatabaseCopyStatus
Name                                          Status
CopyQueue ReplayQueue LastInspectedLogTime   ContentIndex
Length    Length                             State
DB01-MS01 (A-B)\S02                              Healthy         0
0           1/28/2011 11:08:27 AM Healthy
DB02-MS01 (C-D)\S02                    Mounted         0
0                                  Healthy
DB03-MS01 (E-G)\S02                              Healthy         0
0           1/28/2011 11:10:36 AM Healthy
DB04-MS01 (H-J)\S02                               Mounted         0
0                                  Healthy
DB06-MS01 (M-N)\S02                              Mounted         0
0                                  Healthy
DB07-MS01 (0-P)\S02                              Healthy         0
0           1/28/2011 10:58:23 AM Healthy
DB08-MS01 (Q-R)\S02                              Mounted         0
0                                  Healthy
DB10-MS01 (U-V)\S02                               Mounted         0
0                                  Healthy
DB11-MS01 (W-Z)\S02                              Healthy         0
0           1/28/2011 11:09:45 AM Healthy
DB05-MS01 (K-L)\S02                               Healthy         0
0           1/28/2011 11:09:42 AM Healthy
DB09-MS01 (S-T)\S02                              Healthy         0
0           1/28/2011 11:08:34 AM Healthy

Database passive content index state stays FailedAndSuspended even after reseeding

I have a mailbox database with two copies in a database availability group, the active copy is healthy and its content index state reports healthy as well, the passive copy is healthy but its content index state reports FailedAndSuspended.
I tried the: Update-MailboxDatabaseCopy <DBName>\<ServerName> -CatalogOnly more than one time, it completes (says 100KB written) but the state never changes.
I even tried to manually stop the service>delete CI>start the service, the CI folder was recreated (about 1 GB) but still the state is still FailedAndSuspended.
Please Help!

I found the following warning in the event log,
Event ID: 1009
The indexing of mailbox database Main-EX02-DB1 encountered an unexpected exception. Error details: Microsoft.Exchange.Search.Core.Abstraction.OperationFailedException: The component operation has failed. ---> Microsoft.Exchange.Search.Core.Abstraction.CatalogReseedException:
The component operation has failed.
   at Microsoft.Exchange.Search.Engine.SearchFeedingController.DetermineFeederStateAndStartFeeders()
   at Microsoft.Exchange.Search.Engine.SearchFeedingController.InternalExecutionStart()
   at Microsoft.Exchange.Search.Core.Common.Executable.InternalExecutionStart(Object state)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Search.Core.Common.Executable.EndExecute(IAsyncResult asyncResult)
   at Microsoft.Exchange.Search.Engine.SearchRootController.ExecuteComplete(IAsyncResult asyncResult)
I checked online, and found one website talking about the "ContentSubmitters" group, which I created in the Exchange Security Groups OU without any members but with stated permissions:
https://abdullrhmanfarram.wordpress.com/2013/06/16/event-id-1009-content-index-status-of-the-mailbox-databases-failed/

Content Index State Crawling

We have an Exchange database that seems to always have a Content Index State that is crawling. Some end users have complained about slow searches and indexing issues (which is expected). We have
stopped the search services and renamed the catalog directory in an effort to rebuild the search catalog, but it just goes right back to crawling. The database is only about 300GB, so I don't think size is an issue.
Could it be there is some corruption on the database that is causing issues with the index catalog. We have removed the database from the DAG and tried it as a stand alone database, with the same
results.
Any ideas would be appreciated.

did you find anything in the event viewer (app/Sys logs).
You may consider restarting Search Indexer service and then check if that gets healthy or not.
If it still doesn't say healthy then you might have to consider Resetting Search Index for problematic Database or all database if all if it is a problem with all databases.
Refer to the link below to get info about how to reset Search index for a database.
Exchange
2010 Database copy on server has content index catalog files in the following state: Failed
Establishing Exchange Content Index
Rebuild Baselines – Part 1
How To Troubleshoot Issues With Exchange 2010 Search
Reply back with the outcome!
Pavan Maganti ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your
question. ~~ This Information is provided is "AS IS" and confers NO Rights!!

My BlackBerry z10 delete after every restart

After I installed os 10.3.1.1865 into my blackberry z10 stl-3, it's resets after every restart or the battery drains, all my apps, settings, documents will be done...
please what can i do?

Hi @man605
Can you confirm that running this tool produces The fix is not applicable to this device?
Assuming that's the case, if possible can you please reproduce this issue can capture two sets of logs for me?
To do this complete the steps below.
Log Set #1 - Before restarting
Restart your device
Within 5 minutes of restarting, create a new document using Docs to Go
Open the Help app
Swipe down from the top of the screen, tap Create Report
Tap Save Log Snapshot
If prompted to upload logs, tap No
Log Set #2 - After restarting
Restart your device
Within 5 minutes of restarting, verify the file created using Docs to Go was removed
Open the Help app
Swipe down from the top of the screen, tap Create Report
Tap Save Log Snapshot
If prompted to upload logs, tap No
After completing these steps, open File Manager and browse to documents\logs.
Within two files will appear along the lines of bbswltlog<date>.zip. Tap and hold each file followed by tapping Share
Select your email address and send the log files to supportforums[at]blackberry.com with the subject Attn Ty; Logs from man605
When you send your email, please include your device PIN as well. Thanks!
Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog

Same bugs occuring after every restart

I'm using webOS 2.1.2 on an HP Veer 4G. Every time I restart the phone, the following bugs happen:
1) The Voice Dial shortcut that I put on the taskbar (wave) has been removed; also, the Voice Dial shortcut that I had moved to a custom location in the Applications panel is lost and the icon is moved to the last spot. Every time, I have to move it back to where I want it in the Applications panel and then re-add it to the taskbar (wave) area.
2) Even though I've already gone through the entire tutorial in hopes that it would never bother me again, a Gestures Tutorial notification comes up every single time the phone starts up. I would just like to delete this application, if possible, but I don't see a way to do it like I can with custom apps.
Has anyone else experienced these or similar issues after a restart and know of any solutions or work-arounds? Also, is there an official place that I can report bugs to Palm/HP? Thanks!
Post relates to: HP Veer p160una (AT&T)
This question was solved.
View Solution.

Thetreoguy:
Thanks for the reply! I'll look forward to an update for the Voice Dial app soon.
Regarding the Gesture Tutorial, you are correct that it did not finish the first time I used it. The tutorial actually locked up on me and I had to shut it down. I've followed it through to completion a couple of times since then, but it still pops up after every restart.
What exactly will happen if I go to Reset Options and Erase apps and data? Will it erase my personal data that I've spent a long time adding, or just the default apps? Once it erases the apps, how do I get them back (with the exception of the Gesture Tutorial, of course)? If it erases all my personal data too, is there a way to back them up and copy them back to the phone and still preserve all contact information and the link to the contact photos I've added?
Thanks again for your help.

8 fonts in the trash after every restart!

Hi.
Snow Leopard 10.6.1 is working great but I am finding 8 fonts in the trash after every restart!
ArialHB, Corsiva, Nadeem, NewPeninimMTBoldInclined, Baghdad, MshtakanRegular, NewPeninimMT, NewPeninimMTInclined.
This can't be good. Does anybody know what that means and what to do?
I see a lot of people have font-problems.
W.W.

Your choice - Back them up to CD-R if you've a mind, but I'd pull the trigger, finish them off and get rid of them. They've ended up there for a reason.
Also, don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come in from MS Office 2008, including fonts related to an Equation Editor installation.
Good luck going forward.

Sticky Keys keeps turning off after every restart

the Sticky Keys option in the universal access prefs pane keeps turning off after every restart. how can i fix this?

It seems to be a common problem in the OS that when you restarts some of the settings get reset. For me it happens with the screeen dimming before sleep and the double click using 2 fingers and maybe others that I don't know about. I am hoping that its fixed in 10.4.7 which should be out within a week or so.

Session.LoggedIn state fails after Adobe Acrobat upgrade 7.08

After a couple of my users installed the acrobat reader 7.08
upgrade; every time they open a browser window (IE) in our
corporate portal (CFMX7) application they are prompted to login
again. It appears that their session state is being wiped out. My
helpdesk has verified that by uninstalling acrobat reader 7.08 and
installing acrobat reader 7.08 without installing any of the
acrobat plug-ins the portal application works again. We check in
application.cfm for "Session.LoggedIn". Anyone know of why this
reader upgrade would mess with session variables?

Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite

Can't login to Mac Pro after every restart

Hi all,
For 5 days I've not been able to log into my computer at work after its been restarted/gone to sleep. The IT guys have had to do all kinds of stuff to get it working again. And every time we think it's fixed, I've come in the next morning and have the same problem, can't login.
I've eliminated that its my login details as I was able to login on another machine just fine. And others can't login to my computer, so it's obviously an issue with my machine/OS.
Does anyone have any ideas of why this would keep happening? It's as if something keeps resetting after each restart that then won't allow anyone else to login. This is all I can think of, but honestly have no idea. Any suggestions or help would be greatly appreciated as its really frustrating and putting me very behind on my work. Thank you!
Btw, it's a Mac Pro duel quad core, 16GB ram, OS 10.6.7 I believe.
Also, the admin and root can login, just not any other accounts. So the computer can be accessed, but not thru my or any other accounts on the network.

Hey there.
Well, I figured out what is causing my problem. It's Mobile accounts. I started fresh with a new install and a standard Active Directory account (not Mobile). I authenticated 20+ times. Rebooted at least 10 times. Everything worked great. Then I decided to create the Mobile account. That's when everything broke again. My Active Directory account was getting locked after one accurate attempt to authenticate. When IT unlocked it I could go one step further but then would lock me out the next time I tried to authenticate. I've replicated this twice.
So for me, it's clearly a Mobile account problem. Which is bad because half of the Macs under my care are notebooks.
Please let me know what you find out on your end.
Thanks,
Adam

2 fonts in my trash after every restart

Hello forum,
I've been pestered by a strange buggy sitch for weeks now, and I cannot find a solution. I looked 50 pages deep into the threads regarding the FINDER, no answers. There were a few threads on Trash issues, none close to what I'm experiencing. Although not a "mission critical" problem, it's mostly an annoyance which, to me, hints of something more serious or potentially bad.
Every time I restart - either when restarting after a BootCamp session BACK to Leopard - or when simply restarting Leopard for what ever reason - I always have two fonts in my trash can, in a "Recovered Files" folder. They delete without trouble or fuss...
One of the two fonts is always " ヒラギノ角ゴ ProN W3.otf " and the other is "AppleGothic.ttf " .
Once or twice the second font was Waldorf, Adobe Garamond, Apple Garammond, whatever... This suggests to me it has little to do with the font(s) itself.
Of note; none of these fonts were being actively used by an application I was working in (i.e. Adobe InDesign, Illustrator, Photoshop, Mail, Safari, etc.) Of course, they are in use by the system - due to the nature that they are indeed "loaded" into the OS.
In terms of what I've done to try and fix this myself, I've done the following:
• I occasionally run AppleJack
• I've used Apple's *Font Book* to verify all fonts and check for duplicate fonts - all dupes are turned-off.
• I've deleted most every non-US English font typeface the system had, especially any/all of the Asian dialect fonts
Can anyone suggest a solution? Thank you in advance - I love these forums, they are always most helpful!

Latest developments:
The problem seems to have been corrected - that's the good news. The bad? I'm not sure what exactly fixed it; this is what I did:
I ran CHKDSK from within BootCamp. Everything checked-out just fine. Of note, XP crashed from a "stable" desktop after I changed the security settings on a JPG file. I know there isn't a correlation at all here - that JPG file didn't exist when this problem began occurring weeks ago.
I think the fix was deleting some font files - not from within Font Book - but directly from the user font directory; path and fonts as follows:
Mac HD > Users > UserName > Library > Fonts >
the following four fonts were deleted:
MS Gothic.ttf
MS Mincho.ttf
MS PGothic.ttf
MS PMincho.ttf
After several restarts - from into and out BootCamp AND into and out of a few other user accounts, returning to my main login account (running as Admin) the "Recovered Files" folder did NOT appear in the trash, of course, neither did any fonts.
Lastly, I ran OnyX and deleted (fully) the trash - it found a few items from other user accounts, deleted all of that garbage (what ever it was) before deleting the aforementioned fonts.
In retrospect, I suspect the origin my have been simply a corrupted font such that FontBook didn't catch the problematic font. It subsequently corrupted one or more of my custom font lists from within FontBook. I trashed those custom lists the other night, but the problem persisted...
So - cumulatively, something did the trick.
Case closed for now.

Server file system is growing after every restart of weblogic - OBIEE 11g

Hi,
We do a backup of the our BI production server every night (OBIEE 11.1.1.6.2 BI1)
The process we follow is:
1. Stop BI Services
2. Weblogic (incluedes Node Manager, Weblogic and others)
After every stop of weblogic, there is a file get created under WLS_Home/instances/instance1 and the file is like core.xxxxx ( e.g. core_31176, core_19440).
My questions regarding these files are:
1. What is the use of these files?
2. Can I delete them (Depends on the answer of the above question)?
3. Is it possible to control not to create these files (if they are not useful)?
Thanks in advance.
Kiran

869650 wrote:
Hi,
We do a backup of the our BI production server every night (OBIEE 11.1.1.6.2 BI1)
The process we follow is:
1. Stop BI Services
2. Weblogic (incluedes Node Manager, Weblogic and others)
After every stop of weblogic, there is a file get created under WLS_Home/instances/instance1 and the file is like core.xxxxx ( e.g. core_31176, core_19440).
My questions regarding these files are:
1. What is the use of these files?
2. Can I delete them (Depends on the answer of the above question)?
3. Is it possible to control not to create these files (if they are not useful)?
Thanks in advance.
KiranCheck this thread: CORE.xxxx big file... What is it?
It sounds like it is safe to remove those file's unless you need to debug any weblogic issues.
Please mark correct or helpful if answered.
Thanks,
-A.Y

Content Index State Failed - After every restart on 2010 mbx server

Similar Messages

Maybe you are looking for