Content index state: Failed

Hi.
I have been restoring the entire Windows after a bigger problem in the past. However, there were data for Exchange server at a completely different disk which was not affected.
But now I can not load up OWA and when you look in the ECP so says the following under databases "Content index state: Failed"
I have tried to repair it but without any success.
The operation couldn't be performed because object '0747478411\MAIL-SERVER01' couldn't be found on 'server'.
+ CategoryInfo : NotSpecified: (:) [Update-MailboxDatabaseCopy], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : DD4CF704,Microsoft.Exchange.Management.SystemConfigurationTasks.UpdateDatabaseCopy
+ PSComputerName : mail-server01
Update-MailboxDatabaseCopy "0747478411\MAIL-SERVER01" -CatalogOnly
All i have in owa now is
something went wrong
Sorry, we can't get that information right now. Please try again later. If the problem continues, contact your helpdesk.

Hi Jesper,
Thank you for your question.
By my understanding, we should not simply recover window system, we should performance a disaster recover for Exchange by the following link:
https://technet.microsoft.com/en-us/library/dd876880(v=exchg.150).aspx
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Similar Messages

Exchange 2013: Content Index State Failed

I am running two, two node DAG's with Exchange 2013.
One DAG pair is running 5 databases with Server 2012 Standard and the second DAG pair is running Server 2008 R2 SP1 Standard with a single shared database.
No matter what I try, ALL 6 databases show "ContentIndexState: Failed" with "ContentIndexErrorMessage: An internal error occurred for the database or its index.".
I have tried rebuilding the indexes manually, automatically and manually copying the database files between servers. I also receive errors when trying to failover the databases because the content index state is failed.
In my test environment I have a very similar setup working fine with no issues.
Please let me know what I can try to get this resolved.
The error I receive when running the following set of commands is:
suspend-MailboxDatabaseCopy dag2db1\mbox1
update-MailboxDatabaseCopy dag2db1\mbox1 -deleteexistingfiles
[PS] C:\Windows\system32>update-mailboxdatabasecopy dag2db1\mbox1 -deleteexistingfiles
Confirm
Are you sure you want to perform this action?
Updating database copy DAG2DB1\MBOX1 on server MBOX1
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"): a
WARNING: Seeding of content index catalog for database 'DAG2DB1' failed. Please verify that the Microsoft Search (Exchange) and the Host Controller service for Exchange services are running and try the operation again. Error: Therevwas no endpoint listening
at net.tcp://localhost:17063/Management/SeedingAgent-0A2745DF-4522-42AB-9115-5DDE9EDEF1C612/Single that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details..
[PS] C:\Windows\system32>

Hi Folks,
Here we go;
"On
August 14th, we announced the removal of the
MS13-061 Security Update for Exchange Server 2013 due to an issue where the patch changed settings for the search infrastructure, placing the content index for all databases into a failed state. As of today, we have released updated security updates
for both Exchange 2013 RTM CU1 and Exchange 2013 RTM CU2."
Details below;
http://blogs.technet.com/b/exchange/archive/2013/08/27/now-available-updated-release-of-ms13-061-security-update-for-exchange-server-2013.aspx
Yavuz Eren Demir
After installing this patch (Exchange2013-KB2874216-v2-x64-en.msp) seeding of the databases was impossible.
Error:
warning
Seeding of content index catalog for database 'Database02' failed. Please verify that the Microsoft Search (Exchange) and
the Host Controller service for Exchange services are running and try the operation again. Error: Could not connect to net.tcp://localhost:3863/Management/SeedingAgent-F293698C-B2D0-40CA-A2C3-FB37982E708712/Single. The connection attempt lasted for a time
span of 00:00:02.0592000. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:3863. .
Looking at the two services mentioned in this warning I've noticed the Microsoft Exchange Search Host Controller (HostControllerService)
was disabled
After Changing it to Automatic and enabling it, the problem was salved

Content Index State: Failed and Suspended Exchange Server 2013

On my passive Server "Content Index State" mailbox database is still Failed and Suspended for almost a week.
Actions Taken to Resolve the Issue:
- Update-mailboxdatabasecopy
-Delete the exisiting folder of database on passive server and run database copy on EAC
Still got FAILED AND SUSPENDED content index state.
Need some advice guys..
Thanks!

Hi,
Please check the following article and see if it can resolve your problem.
https://support.microsoft.com/kb/2807668
Please check the active database, make sure the content index is healthy. If possible, please rebuild content index of active database. And then reseed passive database copy to check result.
Best regards,
Belinda Ma
TechNet Community Support

Content Index State Failed - After every restart on 2010 mbx server

I noticed that everyone is saying just to run the catalog only command on any database that gets
Contnt index state failed after a restart. but what if you are faililng over 30database and 20 of them get corrupted? run this commadn 1 by 1? really?

Thanks
wawoodwa , this command solved my problem!!!
On other sites I found command:
"Update-MailboxDatabaseCopy –Identity ‘DB2’ –CatalogOnly" it was not working, I got the same error as OldSchoola.

Content Index State Failed - Exchange 2010 2 Node Dag

Hello,
Last night I needed to restart one of my Exchange 2010 DAG nodes. I moved all Active Database copies of this node to the other node in the DAG. I then restarted the node with no Active Database copies. When the server came back up I moved
the Active Database copies back onto the node that they were initially on. The node that I restarted now shows the ContentIndexState of all Databases as "Failed". Test-replicationhealth gives the following results:
[PS] C:\Windows\system32>Get-MailboxDatabaseCopyStatus -Server S01
Name                                          Status
CopyQueue ReplayQueue LastInspectedLogTime   ContentIndex
Length    Length                             State
DB01-MS01 (A-B)\S01                     Mounted         0         0
Failed
DB02-MS01 (C-D)\S01                     Healthy         0         0
1/26/2011 9:57:40 AM           Failed
DB03-MS01 (E-G)\S01                     Healthy         0         1
1/26/2011 10:02:38 AM         Failed
DB04-MS01 (H-J)\S01                     Mounted         0         0
Failed
DB06-MS01 (M-N)\S01                     Healthy         0         0
1/26/2011 10:02:25 AM         Failed
DB07-MS01 (0-P)\S01                     Healthy         0         0
1/26/2011 9:57:17 AM            Failed
DB08-MS01 (Q-R)\S01                     Mounted         0         0
Failed
DB09-MS01 (S-T)\S01                     Mounted         0         0
Failed
DB05-MS01 (K-L)\S01                     Mounted         0         0
Failed
DB10-MS01 (U-V)\S01                     Healthy         0         0
1/26/2011 10:01:59 AM          Failed
DB11-MS01 (W-Z)\S01                     Healthy         0         0
1/26/2011 9:57:50 AM           Failed
[PS] C:\Windows\system32>Get-MailboxDatabaseCopyStatus -Server S02
Name                                          Status
CopyQueue ReplayQueue LastInspectedLogTime   ContentIndex
Length    Length                             State
DB01-MS01 (A-B)\S02                     Healthy         0         0
1/26/2011 10:00:36 AM Healthy
DB02-MS01 (C-D)\S02                     Mounted         0         0
Healthy
DB03-MS01 (E-G)\S02                     Mounted         0         0
Healthy
DB04-MS01 (H-J)\S02                     Healthy         0         0
1/26/2011 10:02:29 AM Healthy
DB06-MS01 (M-N)\S02                     Mounted         0         0
Healthy
DB07-MS01 (0-P)\S02                     Mounted         0         0
Healthy
DB08-MS01 (Q-R)\S02                     Healthy         0         0
1/26/2011 10:02:32 AM Healthy
DB10-MS01 (U-V)\S02                     Mounted         0         0
Healthy
DB11-MS01 (W-Z)\S02                     Mounted         0         0
Healthy
DB05-MS01 (K-L)\S02                     Healthy         0         0
1/26/2011 10:02:21 AM Healthy
DB09-MS01 (S-T)\S02                     Healthy         0         0
1/26/2011 10:01:33 AM Healthy
[PS] C:\Windows\system32>test-replicationhealth
Server          Check                      Result     Error
S01          ClusterService             Passed
S01          ReplayService              Passed
S01          ActiveManager             Passed
S01          TasksRpcListener         Passed
S01          TcpListener                  Passed
S01          DagMembersUp           Passed
S01          ClusterNetwork            Passed
S01          QuorumGroup               Passed
S01          FileShareQuorum            Passed
S01          DBCopySuspended            Passed
S01          DBCopyFailed               Passed
S01          DBInitializing             Passed
S01          DBDisconnected             Passed
S01          DBLogCopyKeepingUp         Passed
S01          DBLogReplayKeepingUp       Passed
I appreciate any help. Thank you.
R

[PS] C:\Windows\system32>Get-MailboxDatabaseCopyStatus
Name                                          Status
CopyQueue ReplayQueue LastInspectedLogTime   ContentIndex
Length    Length                             State
DB01-MS01 (A-B)\01                                 Mounted
0         0                                  Healthy
DB02-MS01 (C-D)\S01                               Healthy         0
0           1/28/2011 11:05:45 AM Healthy
DB03-MS01 (E-G)\S01                               Mounted         0
0                                  Healthy
DB04-MS01 (H-J)\S01                                Healthy
0         0           1/28/2011 11:07:50 AM Healthy
DB06-MS01 (M-N)\S01                               Healthy         0
0           1/28/2011 11:02:12 AM Healthy
DB07-MS01 (0-P)\S01                                Mounted
0         0                                  Healthy
DB08-MS01 (Q-R)\S01                               Healthy         0
0           1/28/2011 11:09:08 AM Healthy
DB09-MS01 (S-T)\S01                                Mounted
0         0                                  Healthy
DB05-MS01 (K-L)\S01                                Mounted
0         0                                  Healthy
DB10-MS01 (U-V)\S01                               Healthy         0
0           1/28/2011 11:02:53 AM Healthy
DB11-MS01 (W-Z)\S01                              Mounted         0
0                                  Healthy
[PS] C:\Windows\system32>Get-MailboxDatabaseCopyStatus
Name                                          Status
CopyQueue ReplayQueue LastInspectedLogTime   ContentIndex
Length    Length                             State
DB01-MS01 (A-B)\S02                              Healthy         0
0           1/28/2011 11:08:27 AM Healthy
DB02-MS01 (C-D)\S02                    Mounted         0
0                                  Healthy
DB03-MS01 (E-G)\S02                              Healthy         0
0           1/28/2011 11:10:36 AM Healthy
DB04-MS01 (H-J)\S02                               Mounted         0
0                                  Healthy
DB06-MS01 (M-N)\S02                              Mounted         0
0                                  Healthy
DB07-MS01 (0-P)\S02                              Healthy         0
0           1/28/2011 10:58:23 AM Healthy
DB08-MS01 (Q-R)\S02                              Mounted         0
0                                  Healthy
DB10-MS01 (U-V)\S02                               Mounted         0
0                                  Healthy
DB11-MS01 (W-Z)\S02                              Healthy         0
0           1/28/2011 11:09:45 AM Healthy
DB05-MS01 (K-L)\S02                               Healthy         0
0           1/28/2011 11:09:42 AM Healthy
DB09-MS01 (S-T)\S02                              Healthy         0
0           1/28/2011 11:08:34 AM Healthy

Database passive content index state stays FailedAndSuspended even after reseeding

I have a mailbox database with two copies in a database availability group, the active copy is healthy and its content index state reports healthy as well, the passive copy is healthy but its content index state reports FailedAndSuspended.
I tried the: Update-MailboxDatabaseCopy <DBName>\<ServerName> -CatalogOnly more than one time, it completes (says 100KB written) but the state never changes.
I even tried to manually stop the service>delete CI>start the service, the CI folder was recreated (about 1 GB) but still the state is still FailedAndSuspended.
Please Help!

I found the following warning in the event log,
Event ID: 1009
The indexing of mailbox database Main-EX02-DB1 encountered an unexpected exception. Error details: Microsoft.Exchange.Search.Core.Abstraction.OperationFailedException: The component operation has failed. ---> Microsoft.Exchange.Search.Core.Abstraction.CatalogReseedException:
The component operation has failed.
   at Microsoft.Exchange.Search.Engine.SearchFeedingController.DetermineFeederStateAndStartFeeders()
   at Microsoft.Exchange.Search.Engine.SearchFeedingController.InternalExecutionStart()
   at Microsoft.Exchange.Search.Core.Common.Executable.InternalExecutionStart(Object state)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Search.Core.Common.Executable.EndExecute(IAsyncResult asyncResult)
   at Microsoft.Exchange.Search.Engine.SearchRootController.ExecuteComplete(IAsyncResult asyncResult)
I checked online, and found one website talking about the "ContentSubmitters" group, which I created in the Exchange Security Groups OU without any members but with stated permissions:
https://abdullrhmanfarram.wordpress.com/2013/06/16/event-id-1009-content-index-status-of-the-mailbox-databases-failed/

Content Index State Crawling

We have an Exchange database that seems to always have a Content Index State that is crawling. Some end users have complained about slow searches and indexing issues (which is expected). We have
stopped the search services and renamed the catalog directory in an effort to rebuild the search catalog, but it just goes right back to crawling. The database is only about 300GB, so I don't think size is an issue.
Could it be there is some corruption on the database that is causing issues with the index catalog. We have removed the database from the DAG and tried it as a stand alone database, with the same
results.
Any ideas would be appreciated.

did you find anything in the event viewer (app/Sys logs).
You may consider restarting Search Indexer service and then check if that gets healthy or not.
If it still doesn't say healthy then you might have to consider Resetting Search Index for problematic Database or all database if all if it is a problem with all databases.
Refer to the link below to get info about how to reset Search index for a database.
Exchange
2010 Database copy on server has content index catalog files in the following state: Failed
Establishing Exchange Content Index
Rebuild Baselines – Part 1
How To Troubleshoot Issues With Exchange 2010 Search
Reply back with the outcome!
Pavan Maganti ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your
question. ~~ This Information is provided is "AS IS" and confers NO Rights!!

Content Index State = 5?

Hi all,
I have a sort of strange issue. When i look at the database copies check the ContentIndexState column, i would have expected the status to be 'Healthy' or 'FailedAndSuspended' or even 'Crawling'. I have two copies where the status is simply just '5'. Anyone
have some idea what is happening here and how to correct it?
/Trev

Hi,
Agree with Andy. Please run the Update-MailboxDatabaseCopy cmdlet against this database copy to check result.
You can also rebuild content index to check result, the time of rebuding index is based on the database size.
Best regards,
Belinda Ma
TechNet Community Support

Content Inde State: FailedAndSuspended

I have an Exchange 2013 server that I am migrating mailboxes to from Exchange 2007. During the move the drive ran out of space and I had to shut the machine down to give it more drive space (Virtual Machine). Now my database has a Content Index State of
FailedAndSuspended.
I have several threads on this and have tried to manual rebuild the index state. I basically followed this: http://www.techieshelp.com/exchange-2013-outlook-and-owa-search-does-not-work/
I also created the Contentsubmitters group and gave full access to administrators and network services. It still will not rebuild. After starting the search services backup it goes to a state of "unknown" for a bit then goes back to failedandsuspended.
I don't see a new folder being created either so something isn't working. Any ideas?

Dismount and Mount the database and run the command again.
Post the update
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Dismounted and remounted database. Ran the following with the posted results.
[PS] C:\Windows\system32>Update-MailboxDatabaseCopy -Identity "ex-mbcas1\firstdatabase" -CatalogOnly
The operation couldn't be performed because object 'ex-mbcas1\firstdatabase' couldn't be found on
'PHXDC002.mydomain.local'.
    + CategoryInfo          : NotSpecified: (:) [Update-MailboxDatabaseCopy], ManagementObjectNotFoundException
    + FullyQualifiedErrorId : [Server=EX-MBCAS1,RequestId=ab714e0d-e3a3-4db0-8d20-9e997dd01b16,TimeStamp=3/4/2014 3:50
   :42 AM] 167450DA,Microsoft.Exchange.Management.SystemConfigurationTasks.UpdateDatabaseCopy
    + PSComputerName        : ex-mbcas1.mydomain.local
PHXDC002 is the name of a domain controller. There are 2 others as well. PHXDC002 does not have exchange on it.
Ex-mbcas1 is the 2013 Exchange server.

DAG Big Problem with Content Indexes / Failed on both Servers

Hello,
i have 20 DBs in a DAG. And for 5 days both! content indexes failed.
I tried to recreate it on the passive server stopping the services and deleting the folders but it does not work. I will try the contentsubmitters group this evening (because this is very cpu consuming).
If that doesn't work what else can i do ?
Best regards
Stephan

Hi ,
Please use the below mentioned blog to have a healthy context index state for your active databases .
http://blogs.technet.com/b/exchangesearch/archive/2013/10/28/rebuild-an-index-on-exchange-2013-for-specific-databases.aspx
Then do the following for the passive copies.
Update-MailboxDatabaseCopy -identity "name of the DB" -CatalogOnly
Note : Before updating please suspend the passive database copy and then resume the copy once the update gets completed.
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Content Index in Unknown state

We are running exchange 2013 with 2 servers in a DAG. On one of the servers we are getting error messages in the event log to do with the search function.
Microsoft.Exchange.Search.Core.Abstraction.OperationFailedException: The
component operation has failed. --->
Microsoft.Exchange.Search.Engine.FeedingSkippedException: "Feeding was skipped
for 'b0d55635-e3d9-4d83-9661-d7379e1cf0b0 (MDB01)' due to the state 'Unknown',
error code: 'Unknown'." at
Microsoft.Exchange.Search.Engine.SearchFeedingController.InternalExecutionStart()
at
Microsoft.Exchange.Search.Core.Common.Executable.InternalExecutionStart(Object
state) --- End of inner exception stack trace --- at
Microsoft.Exchange.Search.Core.Common.Executable.EndExecute(IAsyncResult
asyncResult) at
Microsoft.Exchange.Search.Engine.SearchRootController.ExecuteComplete(IAsyncResult
asyncResult)
When someone attempts a search which uses the server we get the following message.
Exchange Server Information Store has encountered an error while executing a full-text index query ("string("mark*", mode="and")"). Error information: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]:
Internal error while processing request (Fault Detail is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is:
I have looked on the internet for a solution and so far nothing has helped the issue. I've looked at the content submitters group but I would have thought it would have effected both servers and not just 1.
I've run the script to install the search foundation service but this has not resolved the issue.
Has anyone come across the errors both and resolved the issue?
Thanks
Chris

Hi,
Please check the content index status of databases in DAG. If it's unhealthy, please rebuild content index to check result.
Best regards,
Belinda Ma
TechNet Community Support

Exchange Server 2013 Content Index is in "Unknown" state.

Hi Experts,
We have two Exchange Server 2013 CU3 installed in our customer premises 6 months back on top of Windows Server 2012 OS.
From last week, we are getting the content index status as "Unknown" while checking the "Get-Mailboxdatabasecopystatus".
We have tried to reseed the database by using "update-mailboxdatabasecopy -identity <db> -deleteexistingfiles then we came to know the server is not responding on port 3863.
Attached image is for your reference.
Need support from experts to resolve at the earliest.
Regards,
Santhosh
Santhosh Sivaraman MCITP: Microsoft Exchange Server 2007/2010 | MCSE/MCSA

Hi,
I had the same issue and was able to solved by recreate the search index component on the mailbox servers
Recreate the Search Foundation from scratch
Stop and disable the search services and rename the Data Folder "C:\Program Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\HostController\Data"
Open power shell and navigate to C:\Program Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\Installer
Run the command : .\installconfig.ps1 -action I -dataFolder "c:\Program Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\HostController\Data"
Output should be like
[PS] C:\Program Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\Installer>.\installconfig.ps1 -action I -dataFolder "C:\Program Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\HostController\Data"
Configuring Search Foundation for Exchange....
Successfully configured Search Foundation for Exchange
Rename the Index files for the database that are active on the node .
Start the Search Services
Removed a configuration entry that refers to the ContentSubmitters group. This entry is present in four XML files. Each file is called WcfConfigurator.
you can find each file in the following folder:
%ExchangeInstallPath%\Bin\Search\Ceres\HostController\Data\Nodes\Fsis\NODENAME\Configuration\Local
Here, “%ExchangeInstallPath%” is the Exchange installation root path, and the placeholder NODENAME represents one of the following names. (There is one name for each of the four files that are to be edited.)
AdminNode1
ContentEngineNode1
IndexNode1
InteractionEngineNode1
These are text files. You can use Notepad or any other convenient plain text editor to change them. Make sure that you make only the change that is described here.
Each file contains at most one line that contains the following: <AuthorizedRole>ContentSubmitters</AuthorizedRole>
Remove this line, and then save the file. Repeat this operation for each of the four files, and then restart the Microsoft Exchange Search Host Controller service.
Found the Index files in Crawling state as expected instead of Unknown.
Once all the Active copies are healthy and still the copies in failed and suspended state, then you can reseed the catalog files only using the below command
Update-MailboxDatabaseCopy -Identity BD\MBserver –CatalogOnly
Good Luck..
Regards,
Ayman Saleh

Mailbox Database Content Index Failed and Suspended

Hello,
     I am having an issue with a Mailbox Database. The content index shows FailedAndSuspended. there are no Bad Copy Counts and it shows as Mounted. I have no DAG so this is a single database and followed the article
here:
http://technet.microsoft.com/en-us/library/ee633475(v=exchg.150).aspx
After it crawled for a little while it went to Failed, then unknown, then crawling, and has finally ended up at FailedAndSuspended again. I am also popping errors as follows:
MSExchangeFastSearch Event ID 1004
MSExchangeIS Event ID 1012
MSExchange ADAccess Event ID 4020
MSExchangeRepl Event ID 4087 (Though this is weird as it is a stand alone database why would it try to replicate it?)
MSExchange Common Event ID 4999
The following Warnings are hitting at the same time:
MSExchangeFastSearch Event ID 1006, 1009, 1010
MSExchange Mid-Tier Storage Event ID 6002, 10010
Anyone have any thoughts on a fix for this?
Michael R. Mastro II

Ok I did a Set-MailboxDatabase "Mailbox Database #" -IndexEnabled $false, then stopped both the MS Exchange Search and MS Exchange Search Host Controllers. Started them again and it showed disabled when I did a get-mailboxdatabasecopystatus. I then went
Set-MailboxDatabase "Mailbox Database #" -IndexEnabled $true. After about 10 minutes got a FailedAndSuspended Status. So here are the logs from event viewer.
Log Name:      ApplicationSource:        MSExchange Mid-Tier StorageDate:          7/20/2014 7:53:49 PMEvent ID:      6002Task Category: ResourceHealthLevel:         WarningKeywords:      ClassicUser:          N/AComputer:      MRM2EX1.MRM2Inc.comDescription:Ping of mdb '7d98ce58-997c-41c1-abde-06d7eaf3dbdd' timed out after '00:00:00' minutes. Last successful ping was at '7/20/2014 11:53:49 PM' UTC.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System>    <Provider Name="MSExchange Mid-Tier Storage" />    <EventID Qualifiers="32768">6002</EventID>    <Level>3</Level>    <Task>6</Task>    <Keywords>0x80000000000000</Keywords>    <TimeCreated SystemTime="2014-07-20T23:53:49.000000000Z" />    <EventRecordID>703314</EventRecordID>    <Channel>Application</Channel>    <Computer>MRM2EX1.MRM2Inc.com</Computer>    <Security /> </System> <EventData>    <Data>7d98ce58-997c-41c1-abde-06d7eaf3dbdd</Data>    <Data>00:00:00</Data>    <Data>7/20/2014 11:53:49 PM</Data> </EventData></Event>
Log Name:      ApplicationSource:        MSExchangeFastSearchDate:          7/20/2014 7:37:17 PMEvent ID:      1006Task Category: GeneralLevel:         WarningKeywords:      ClassicUser:          N/AComputer:      MRM2EX1.MRM2Inc.comDescription:The FastFeeder component received a connection exception from FAST. Error details: Microsoft.Exchange.Search.Fast.FastConnectionException: Connection to the Content Submission Service has failed. ---> Microsoft.Ceres.External.ContentApi.ConnectionException: Recovery failed after 0 retries   at Microsoft.Ceres.External.ContentApi.DocumentFeeder.DocumentFeeder.CheckRecoveryFailed()   at Microsoft.Ceres.External.ContentApi.DocumentFeeder.DocumentFeeder.SubmitDocument(Document document, TimeSpan timeout)   at Microsoft.Ceres.External.ContentApi.DocumentFeeder.DocumentFeeder.SubmitDocument(Document document)   at Microsoft.Exchange.Search.Fast.FastFeeder.SubmitDocumentInternal(Object state)   --- End of inner exception stack trace ---Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System>    <Provider Name="MSExchangeFastSearch" />    <EventID Qualifiers="32772">1006</EventID>    <Level>3</Level>    <Task>1</Task>    <Keywords>0x80000000000000</Keywords>    <TimeCreated SystemTime="2014-07-20T23:37:17.000000000Z" />    <EventRecordID>703192</EventRecordID>    <Channel>Application</Channel>    <Computer>MRM2EX1.MRM2Inc.com</Computer>    <Security /> </System> <EventData>    <Data>Microsoft.Exchange.Search.Fast.FastConnectionException: Connection to the Content Submission Service has failed. ---> Microsoft.Ceres.External.ContentApi.ConnectionException: Recovery failed after 0 retries   at Microsoft.Ceres.External.ContentApi.DocumentFeeder.DocumentFeeder.CheckRecoveryFailed()   at Microsoft.Ceres.External.ContentApi.DocumentFeeder.DocumentFeeder.SubmitDocument(Document document, TimeSpan timeout)   at Microsoft.Ceres.External.ContentApi.DocumentFeeder.DocumentFeeder.SubmitDocument(Document document)   at Microsoft.Exchange.Search.Fast.FastFeeder.SubmitDocumentInternal(Object state)   --- End of inner exception stack trace ---</Data> </EventData></Event>
Log Name:      ApplicationSource:        MSExchangeFastSearchDate:          7/20/2014 7:43:22 PMEvent ID:      1010Task Category: GeneralLevel:         WarningKeywords:      ClassicUser:          N/AComputer:      MRM2EX1.MRM2Inc.comDescription:An operation attempted against a FAST endpoint exprienced an exception. This operation may be retried. Error details: Microsoft.Exchange.Search.Fast.PerformingFastOperationException: An Exception was received during a FAST operation. ---> System.ServiceModel.CommunicationException: The socket connection was aborted. This could be caused by an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local socket timeout was '00:01:00'. ---> System.IO.IOException: The write operation failed, see inner exception. ---> System.ServiceModel.CommunicationException: The socket connection was aborted. This could be caused by an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local socket timeout was '00:01:00'. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host   at System.Net.Sockets.Socket.Send(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags)   at System.ServiceModel.Channels.SocketConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout)   --- End of inner exception stack trace ---   at System.ServiceModel.Channels.SocketConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout)   at System.ServiceModel.Channels.BufferedConnection.WriteNow(Byte[] buffer, Int32 offset, Int32 size, TimeSpan timeout, BufferManager bufferManager)   at System.ServiceModel.Channels.BufferedConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout)   at System.ServiceModel.Channels.ConnectionStream.Write(Byte[] buffer, Int32 offset, Int32 count)   at System.Net.Security.NegotiateStream.StartWriting(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest)   at System.Net.Security.NegotiateStream.ProcessWrite(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest)   --- End of inner exception stack trace ---   at System.Net.Security.NegotiateStream.ProcessWrite(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest)   at System.Net.Security.NegotiateStream.Write(Byte[] buffer, Int32 offset, Int32 count)   at System.ServiceModel.Channels.StreamConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout)   --- End of inner exception stack trace ---Server stack trace:    at System.ServiceModel.Channels.StreamConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout)   at System.ServiceModel.Channels.StreamConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout, BufferManager bufferManager)   at System.ServiceModel.Channels.FramingDuplexSessionChannel.OnSendCore(Message message, TimeSpan timeout)   at System.ServiceModel.Channels.TransportDuplexSessionChannel.OnSend(Message message, TimeSpan timeout)   at System.ServiceModel.Channels.OutputChannel.Send(Message message, TimeSpan timeout)   at System.ServiceModel.Dispatcher.DuplexChannelBinder.Request(Message message, TimeSpan timeout)   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)Exception rethrown at [0]:    at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)   at Microsoft.Ceres.ContentEngine.Admin.FlowService.IFlowServiceManagementAgent.GetFlows()   at Microsoft.Exchange.Search.Fast.IndexManager.<GetFlows>b__16()   at Microsoft.Exchange.Search.Fast.IndexManagementClient.PerformFastOperation[T](Func`1 function, String eventLogKey)   --- End of inner exception stack trace ---Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System>    <Provider Name="MSExchangeFastSearch" />    <EventID Qualifiers="32772">1010</EventID>    <Level>3</Level>    <Task>1</Task>    <Keywords>0x80000000000000</Keywords>    <TimeCreated SystemTime="2014-07-20T23:43:22.000000000Z" />    <EventRecordID>703224</EventRecordID>    <Channel>Application</Channel>    <Computer>MRM2EX1.MRM2Inc.com</Computer>    <Security /> </System> <EventData>    <Data>Microsoft.Exchange.Search.Fast.PerformingFastOperationException: An Exception was received during a FAST operation. ---> System.ServiceModel.CommunicationException: The socket connection was aborted. This could be caused by an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local socket timeout was '00:01:00'. ---> System.IO.IOException: The write operation failed, see inner exception. ---> System.ServiceModel.CommunicationException: The socket connection was aborted. This could be caused by an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local socket timeout was '00:01:00'. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host   at System.Net.Sockets.Socket.Send(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags)   at System.ServiceModel.Channels.SocketConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout)   --- End of inner exception stack trace ---   at System.ServiceModel.Channels.SocketConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout)   at System.ServiceModel.Channels.BufferedConnection.WriteNow(Byte[] buffer, Int32 offset, Int32 size, TimeSpan timeout, BufferManager bufferManager)   at System.ServiceModel.Channels.BufferedConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout)   at System.ServiceModel.Channels.ConnectionStream.Write(Byte[] buffer, Int32 offset, Int32 count)   at System.Net.Security.NegotiateStream.StartWriting(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest)   at System.Net.Security.NegotiateStream.ProcessWrite(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest)   --- End of inner exception stack trace ---   at System.Net.Security.NegotiateStream.ProcessWrite(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest)   at System.Net.Security.NegotiateStream.Write(Byte[] buffer, Int32 offset, Int32 count)   at System.ServiceModel.Channels.StreamConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout)   --- End of inner exception stack trace ---Server stack trace:    at System.ServiceModel.Channels.StreamConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout)   at System.ServiceModel.Channels.StreamConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout, BufferManager bufferManager)   at System.ServiceModel.Channels.FramingDuplexSessionChannel.OnSendCore(Message message, TimeSpan timeout)   at System.ServiceModel.Channels.TransportDuplexSessionChannel.OnSend(Message message, TimeSpan timeout)   at System.ServiceModel.Channels.OutputChannel.Send(Message message, TimeSpan timeout)   at System.ServiceModel.Dispatcher.DuplexChannelBinder.Request(Message message, TimeSpan timeout)   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)Exception rethrown at [0]:    at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)   at Microsoft.Ceres.ContentEngine.Admin.FlowService.IFlowServiceManagementAgent.GetFlows()   at Microsoft.Exchange.Search.Fast.IndexManager.<GetFlows>b__16()   at Microsoft.Exchange.Search.Fast.IndexManagementClient.PerformFastOperation[T](Func`1 function, String eventLogKey)   --- End of inner exception stack trace ---</Data> </EventData></Event>
Log Name:      ApplicationSource:        MSExchange Mid-Tier StorageDate:          7/20/2014 7:53:49 PMEvent ID:      6002Task Category: ResourceHealthLevel:         WarningKeywords:      ClassicUser:          N/AComputer:      MRM2EX1.MRM2Inc.comDescription:Ping of mdb '7d98ce58-997c-41c1-abde-06d7eaf3dbdd' timed out after '00:00:00' minutes. Last successful ping was at '7/20/2014 11:53:49 PM' UTC.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System>    <Provider Name="MSExchange Mid-Tier Storage" />    <EventID Qualifiers="32768">6002</EventID>    <Level>3</Level>    <Task>6</Task>    <Keywords>0x80000000000000</Keywords>    <TimeCreated SystemTime="2014-07-20T23:53:49.000000000Z" />    <EventRecordID>703314</EventRecordID>    <Channel>Application</Channel>    <Computer>MRM2EX1.MRM2Inc.com</Computer>    <Security /> </System> <EventData>    <Data>7d98ce58-997c-41c1-abde-06d7eaf3dbdd</Data>    <Data>00:00:00</Data>    <Data>7/20/2014 11:53:49 PM</Data> </EventData></Event>
Log Name:      ApplicationSource:        MSExchange Mid-Tier StorageDate:          7/20/2014 7:58:39 PMEvent ID:      10010Task Category: ResourceHealthLevel:         WarningKeywords:      ClassicUser:          N/AComputer:      MRM2EX1.MRM2Inc.comDescription:Process: MSExchangeDelivery (2824), Db:a433e8a2-ca26-438e-a9a3-d71305c6c266,C:1,BT:00:00:00,Db:7d98ce58-997c-41c1-abde-06d7eaf3dbdd,C:1,BT:00:00:00,Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System>    <Provider Name="MSExchange Mid-Tier Storage" />    <EventID Qualifiers="32768">10010</EventID>    <Level>3</Level>    <Task>6</Task>    <Keywords>0x80000000000000</Keywords>    <TimeCreated SystemTime="2014-07-20T23:58:39.000000000Z" />    <EventRecordID>703327</EventRecordID>    <Channel>Application</Channel>    <Computer>MRM2EX1.MRM2Inc.com</Computer>    <Security /> </System> <EventData>    <Data>Process: MSExchangeDelivery (2824), Db:a433e8a2-ca26-438e-a9a3-d71305c6c266,C:1,BT:00:00:00,Db:7d98ce58-997c-41c1-abde-06d7eaf3dbdd,C:1,BT:00:00:00,</Data> </EventData></Event>
Michael R. Mastro II

Lost index stats in Ora 8.1.6 Tables when selecting via jdbc

Hi,
i'm using JBuilder8 and Kylix2 on a Linux machine with Oracle oci drivers of client 8.1.7.
The connect through JB8 jdbc via DBPilot is succesful and shows the tables of the db.
After executing a select on any table the index stats of this table are lost.
Kylix works fine without this failure.
Thanks for any comments to this problem
Jens

Well, it's not the PL/SQL code that is causing a problem. Everything worked fine for many months. Then one day (without any changes in the environment or code) the update of a table from a java application (via JDBC) fails. The same update done directly on the DB with SQL Plus still succeeds!
This led us to think that something is wrong with the JDBC connection (which was up for several months). Maybe a memory corruption?
Anyone that experienced similar problems with JDBC?

Spatial query index creation fails with ORA-13282: failure on initializatio

Hi,
I have an Oracle 10g 10.2.0.5.0 database newly installed. Spatial index creation fails:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13282: failure on initialization of coordinate transformation
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 10
The script I am trying to run is:
Insert into USER_SDO_GEOM_METADATA
(TABLE_NAME, COLUMN_NAME, DIMINFO, SRID)
Values
('SOME_TABLE', 'geo',
"SDO_DIM_ARRAY"(
"SDO_DIM_ELEMENT"('X',600000,900000,0.001),
"SDO_DIM_ELEMENT"('Y',150000,400000,0.001)), 23700);
CREATE INDEX IX_GEO_SOME_TABLE ON SOME_TABLE (GEO) INDEXTYPE IS MDSYS.SPATIAL_INDEX ;
Earlier I had some issues with NLS settings in relation to Spatial, but in this particular case setting the NLS_LANG for AMERICAN_AMERICA does not help. I found this comment http://www.orafaq.com/forum/t/127312/2/ but would not like to hack around with MDSYS table content. Any help is highly appreciated.
Regards, Tamas

Tamas,
1 . . .Are you indexing a table that already has geometries or an empty table?
. . . .If the former, do all the geometries in that table have the same (not NULL) SRID (23700)?
2 . .The link you posted suggests a parsing problem since in Hungarian (23700), the decimal seperator is a comma (not a period). Accordingly, I believe the edit to mdsys.sdo_cs_srs.WKTEXT would be:
PROJCS["HD72 / EOV", GEOGCS [ "HD72", DATUM ["Hungarian Datum 1972 (EPSG ID 6237)", SPHEROID ["GRS 1967 (EPSG ID 7036)", 6378160, 298,247167427]], PRIMEM [ "Greenwich", 0,000000 ], UNIT ["Decimal Degree", 0,01745329251994328]], PROJECTION ["Egyseges Orszagos Vetuleti (EPSG OP 19931)"], UNIT ["Meter", 1]]
^ ^ ^ Regards,
Noel

Content index state: Failed

Similar Messages

Maybe you are looking for