Content loaded in tabs
When I click the cross for a new tab, an aol page automatically loads. how do i customize what is loaded in that tab?
That is because the new tab url is set to http://freedompop.aol.com//?mtmhp=&tb_uuid=74554E47A8AACE28D0185B452B1C8547 , by some addon or program installed on your computer.
You can change it.
(1) In a new tab, type or paste about:config in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box that appears above the list, type or paste newtab and pause while the list is filtered
(3) Double-click the browser.newtab.url preference and enter the desired value:
Page thumbnails (default) => about:newtab
Blank tab => about:blank
Built-in Firefox home page => about:home
Any other page => full URL to the page
Press Ctrl+t to open a new tab and verify that it worked (it should take effect immediately).
Similar Messages
-
Spry Tabbed panels content loading
Hello,
I have created a tabbed interface, it looks good, however the
content in some tabs it is a little heavy on some internet
connections.
Is there a way to load the content of each tab separately?
What i wanted to do is for each tab content to load only if
the user clicks on the tab, this way the start page will load much
faster. With the current settings all the content on all tabs loads
at the same time. Did not find anything on sprytabbedpanels.css
that could do this.
Can anyone help me?
Thanks in advance.
Joao.On Thu, 13 Sep 2007 00:57:12 +0000 (UTC), "manzas"
<[email protected]> wrote:
>Hello,
> I have created a tabbed interface, it looks good,
however the content in some
>tabs it is a little heavy on some internet connections.
> Is there a way to load the content of each tab
separately?
> What i wanted to do is for each tab content to load only
if the user clicks
>on the tab, this way the start page will load much
faster. With the current
>settings all the content on all tabs loads at the same
time. Did not find
>anything on sprytabbedpanels.css that could do this.
> Can anyone help me?
> Thanks in advance.
> Joao.
>
>
May we see it? -
I am using SPRY tabs to display static content. I have 4
tabs. When the page loads the content on all 4 tabs shows up one
below the other.
Could anybody suggest how I can stop that. The content for
first tab should only show up on page load.
Other tab content should load when that tab is
clicked.My tabs work but the problem I have is that the content of
all tabs loads when the page loads making it extremely slow.
I've got galleries in the tabs, tab1 2008 tab 2 2007 tab 3
2006 and photos in each gallery all load together.
On another site I did I managed to get it to load the images
in the tab when the user clicks on the tab speeding up initial load
times for the page but I can't remember how I did it, it was
accidental!!! -
Why are my Content Load images -- Exceptions settings not saved?
I designate certain sites as exceptions under Content > Load images automatically. The next time I open Firefox, those exceptions are not there.
This also happens under Privacy > Accept cookies from sites. The exceptions that I put in disappear the next time I open Firefox.
How can I make these exceptions permanent?In case you are using "Clear history when Firefox closes":
*do not clear the Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
You can inspect and manage the permissions for all domains on the <b>about:permissions</b> page or for the current domain via the "Site Identity Button" (globe/padlock) on the location bar and click "More Information" to open "Page Info" and go to the Permissions tab.
*https://support.mozilla.org/kb/how-do-i-manage-website-permissions
You can delete the permissions.sqlite file to reset all permissions. -
Wpc content in KM tab in portal
HI
when i am working with webpage compsoser in order to create a website i have enabled wpc_editor_role but inside the website management i could see nothing. Instead i did not find any wpccontent in teh KM content tab
Can anyone please let me know how do i get wpc content in KM tab.
Regards...Dear Krishnakk,
You can find the Web Content folder under KM tab for the WPC.
Please refer to help.sap.com for more details. [Click Here|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/45/3fe7b4f34d4a18e10000000a114a6b/content.htm]
Best Regards,
Arun Jaiswal -
Version 5.0 on a MAC will not let me switch between tabs. I can open a new tab, but when I try to go to a different tab, it just shows me the contents of the tab most recently opened. Help!
Also, pop up blocker works for some time and then just stops working. I have to close and restart Firefox to get it to work again. Help!I had the same problem, but with Firefox 4.0. My first thought was to update Firefox (after of course restarting FF), but that didn't help it and I had the same problem.
Among others, I had an extension installed and enabled called Tile Tabs 4.10 that I thought could feasibly creating this problem. So I went into my add-ons manager and disabled it, restarted Firefox and the tabs worked properly again. Unfortunately, the Tile Tabs extension is my favorite Firefox add-on and I use it almost every day for managing my web work tasks. I went to the add-on page for Tile Tabs and saw that there was a notice that version 4.10 didn't work properly on Mac OS, and to install version 4.9 of the extension. I saw they had a new, not-yet-reviewed version 4.11 that addressed the Mac OS problem, installed it, and everything seems to be working properly.
I have no idea why all of a sudden I had this problem, as I hadn't updated Firefox or the Tile Tabs extension recently. Also, obviously this might not address your problem, especially if you don't have that add-on installed and enabled. But our problem started at the same time for both of us it appears based on your post time, so its probably not coincidence.
But its worth a look, and you might want to check out other extensions if you don't have Tile Tabs that could be causing the problem. -
How on reboot can I set Firefox to automatically re-load the tabs I had open when I shut down?
Every morning when I do a soft boot to clear the cobwebs out of my PCs brain I have my start settings automatically load 6 apps. Firefox is one. Then I go to a toolbar start tab and click on open all Tabs and it loads 4 tabs for me.
I'm trying to automate this loading of the tabs
I'm using Firefox 4.0. The previous version had a function that asked, when you were closing Firefox, if you wanted the tabs you have open at that point to we load the next time you open Firefox.
This was kind of a jack-leg way of getting tabs open on re-boot, tho it was still an irritation....
This question does not seem to happened in 4.0.
Is there a setting to always invoke the question?
Better yet, is there a setting to always have the tabs / a select group of tabs always open on boot?
Example -in my case I load Vonage, then Sharefile, then 2 home page tabs.
This helps me keep my poor brain organized during the day as I'm multi-tasking in Firefox and the other apps and the phone and such.
My thanks in advance.
KrisTools-Options-General 'When Firefox Starts ' Select: 'Show my windows and tabs from last time'
-
After I updated firefox to 6.0 today firefox has developed a problem loading multiple tabs. When I try to load 10+ tabs, either at the same time or by opening each tab separately, each tab is stuck trying to connect to the desired page. This continues if I close all the tabs and try to load a single page, the single page is unable to get pass connecting. In order to load a new page when this situation arises I must close down firefox and start again, and the program has no history of the previous session.
Other solutions
* https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_other-solutions
Do a MALWARE check with these Malware Scanning programs. You need to scan with all programs because each program detects different malware. Make sure that you UPDATE each program to get the latest version of their databases before doing a scan.
* Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
* SuperAntispyware - http://www.superantispyware.com/
* Windows Defender Home Page -
http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
* Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
* Ad-Aware Free - http://www.lavasoft.com/products/ad_aware_free.php
There are also specialized forums for Malware Removal such as those listed below, where you might be able to get more help:
* Bleeping Computer Forums - http://www.bleepingcomputer.com/forums/
* Spyware Warrior Forums - http://www.spywarewarrior.com/index.php
* SWI Forums - http://www.spywareinfoforum.com/
Check and tell if its working. -
I wish: Sequential (non-synchronous) loading of tabs . . .
What I would like as an option in Preferences ( Safari ), is the ability to select "one tab at a time" tab loading when doing a multiple tab selection in any particular window. In other words, load one tab at a time successfully, and then load the next tab successfully, and so on.
I have found that Safari can spend a lot of time attempting a multiple tabbed load, and then succeed to load no tabs or just a few, because of timeouts.
While SeaMonkey and Firefox do not offer this as an option, they will successfully load all tabs synchronously, a bit of a tab at a time.
So there may be a requirement that Safari not " time-out " on multiple tab loads, or to give the option for which I am wishing.
silky_smoothHi
Welcome to Apple Discussions
Regarding your "wish", best place to post it is via Safari Menu>Report Bugs to Apple. While Apple doesn't usually respond to these types of queries, it's a good idea to let Apple know from a User perspective what your needs are.
Regarding the HTTP timeout, 3rd party shareware SAFT has a number of very useful additional features, including one that extends the time interval for page loading (variable - up to the user as to the length of time (in seconds)). -
Having trouble with dreamweaver cs 6 spry tabbed panels, all content in each tab showes through like it was all created on one page, plus mouse over doesnt work on them.
This started all of a sudden.
The entire website is a series of spry tabbed panels.
http://pacificlaser.com/const.html
if you click on General construction tab things work ok...
if you click on Machine control tab, mouse over doesnt work and all page content of each tab show through.
ive been looking for the answer for 4 months with no success.
Hope a fellow dreamwever-person can help
Thanks RickYou called it: your links to the SpryAssets are linking to your hard drive, not to the files within the folder on the server.
Correct these links:
<script src="file:///C:/Users/work/Desktop/Sites/SpryAssets/SpryTabbedPanels.js" type="text/javascript"></script>
<link href="file:///C:/Users/work/Desktop/Sites/SpryAssets/SpryTabbedPanels.css" rel="stylesheet" type="text/css" />
And you should be good to go.
Beth
ps. If you run into more difficulties with the Spry Widgets, take your questions to the Dreamweaver Spry Forum http://forums.adobe.com/community/labs/spry, where they will get quicker attention.
B -
How to open particular link or content in new tab
how to open particular link or content in new tab.... as in ipad we just continue pressing and a option comes that open in new tab... exactly when i tried in macbook .....i was not able to do.... didn't find the answer after googling also. please suggest?
Check your browser preferences.
ex Safari>Preferences>General> -
How to display existing View as content in TABSTRIP tab?
Is it possible to display existing View as tab content in TabStrip tab? If so how can we do this?
Thanks in advance!Hi,
Please have a look into this linl. It will really help you a lot and give you clear idea on UI development and also about using TabStrip.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0e617bc3-0401-0010-2c82-81f82e73300e">Developing Web Dynpro User Interfaces</a>
Thanks and Regards
Avijit -
I'm trying to change the content of a tab. Can't find info anywhere! My new tab used to come up as Google search page. Now it is Bing, and I don't want Bing. I have uninstalled the program that inadvertently put it there but Bing remains. Where is the tab control that hooks me up with Tab content?
Removal of dupe comment
-
I've built a shockwave presentation that is made up of a
number of
movies, external cast cst files and even an externally linked
JPG image
as my background image.
I'd like some advice on how I should set up my shared
components so that
they load up in the right order and the most efficiently.
The problem I've experienced after making everthing shockwave
was that
my background image loaded late so had buttons appearing on a
black
background. I then imported my JPG into a shared external
cast file
(sing standad import). Still seemed to load in the wrong
order.
So, what can I do to ensure my content loads in the right
order?
And where shoudl i put my background image so that it is not
reloaded
every time a new you jump to a new movie?
Thanks.First off I would build a "loading..." screen of some sort.
Second, use preloadNetThing() to load all external items you
need in the order you like. Then move forward in the project.
Hope that helps. -
Interact with content loaded in html overlay / acces accelerometer?
Hi,
is it in any way possible to interact with html content loaded in the Web Content overlay?
Or is there a way to acces the accelerometer in indesign?
greetz
MarioMoved to DPS forum
Maybe you are looking for
-
Importing internal table from one program to another program
Hi everybody, i have one small doubt. i am using submit statement and passing the values from this program to another program selection screen. in that program logic is written.In that program one internal table values are being exported to the memor
-
IPhone 3g won't connect to computer or iTunes
I tried connecting my iPhone to my computer today but neither the computer nor the phone show any sign of connection. Phone is 3.1.2. Comp is running windows xp media center, iTunes 9.0.3 (or something like that). I've tried doing a full uninstall an
-
Can Microsoft add a screen recording software in the next update
Apple has screen recording software on it when you get it. Can Microsoft do this to? It will promote more gamers to use it and more people who use Youtube to post videos.
-
Can't make RT use generic FPGA FIFO
Hi all, On a cRIO, I'm making a TCP server in RT that feeds data to a DMA FIFO for FPGA consumption. We are setting up multiple servers where each feeds a different DMA. (No, I don't want to merge and multiplex to single DMA). I want a single RT pr
-
Office 365 Customers: General Availability for Access Apps
The news hit last month that Access Apps would be available for all Office 365 customers, well now we can all move full speed ahead. So, what does general availability mean? Customers can now create, share, and use the Access Apps with the same level