Content Lost after Portal restart

Hi Guys,
i have installed a EP 7.0 with SPS14. i Created some content (roles, Iviews, Themese etc.) But after restarting the portal everything is lost. Also i deployed SPS 16 after restart components are on SPS 14 again.
Did someone ever noticed such a behaviour?
best regards,
Kai

hi!
Here you go with Release notes for nw2004~
http://help.sap.com/saphelp_nw04/helpdata/en/44/50c12c97c01193e10000000a155369/frameset.htm
for installation etc - go here-
https://websmp207.sap-ag.de/instguides ->SAP NetWever

Similar Messages

JMS Messages lost after server restart

Hi All,
We have an environment where Oracle SOA 11g is configured to use Weblogic JMS (Database persistence). The JDBC stores have been created to hold the persistent JMS messages. However we have observed that after server restart the messages are getting lost from the queue (non consumed messages as well).
Is there any configuration which we are missing?
Regards
Subhankar

Hello Subhankar,
Which Weblogic version are you using? What are the configuration parameters of the JMS queue you defined? During server shutdown/restart, do you see any errors in the server log?
I would suggest you to raise a case with support as it may require an inspection of your environment and settings to find out the root cause.
Regards,
Anuj

All iBooks content lost after transfer to new iPad.

I recently purchased an iPad 2 and after moving all the contents from my old iPad I have lost everything in iBooks. There is the option to redownload one purchased one but all samples are lost. More importantly though all of my PDFs have disappeared.
I would assume that they are still somewhere in the last backup from my original iPad. Is there any way to retrieve them from the backup?

Open iBooks, tap Library if you happen to have a book open, otherwise tap Store (upper left corner). When the store app opens, tap Purchased (lower left). You should be able to redownload any books you previously purchased through iBook.

"This Library Contains No Content"- connected but content lost after sleep.

Hi,
I am using the second generation Apple TV (with the current updates) and streaming my iTunes library from a fairly new iMac with all current updates (10.6.7). After a period of iMac sleep and not using the Apple TV for a few hours all of my library's content goes missing from my Apple TV. I see the connection to my computer's iTunes library and when I click to it there is a list (music, movies, tv shows etc.) but no graphics and when I choose music, movies, or tv shows etc. I get a message that "the library has no content".
I can use screen sharing from my Macbook or iPhone or iPad and see iTunes on my iMac looking and behaving correctly, but if I want to get content to stream back to the Apple TV I need to close iTunes on the iMac and re-open it. This puzzles me because it wont restore content when the iMac has woken from sleep even if I wait a few minutes or so. As soon as I close iTunes on the iMac (usually through screen sharing) the connection on Apple TV disappears so I know it was connected and once I restart iTunes the connection immediately reappears and then all works fine I have this issue every day now and it's puzzling to me.

Yep, same issue here guys. I am running a 21.5 iMac connected via Ethernet to a Time Capsule which wirelessly talks to 2 x Apple TV MK 2's. All is new kit and running the latest operating system / firmware updates.
Same issue as above which is VERY annoying as I'm using it every day - I keep having to turn home sharing off & back on to 're-awaken' my library. C'MON APPLE, SORT THIS OUT! This is an elementary feature of this system (did they not do a basic field test before launching the software updates?).
I am going to call Apple Support to tell them to look at this thread - needs sorting ASAP. Suggest anyone who also has this issue does likewise then they are more likely to do it as a priority. Not good when I'm trying to convert the missus to everything Apple...
Anthony

SnapDrive transport protocol settings lost after service restart.

Hi everyone,
On one of our SQL Servers we have SnapDrive v.6.4.2, OS is Windows Server 2008 SP2, the server is in a workgroup, not in a AD Domain.
In SnapDrive transport protocol settings we have a storage system defined and everything works fine, but after restarting the SnapDrive service (mostly because of a server restart) the storage settings disappear (the storage system is no longer defined) and SnapDrive cannot see the VMDK LUNs, therefore SnapManager cannot take SQL Server backups.
Any help or suggestions regarding a solution to this problem will be greatly appreciated.
Regards,
Sezgin

I am experiencing the same issue and the OS is Windows server 2003 SP2. Even after adding the transport protocol settings I dont see LUNs getting displayed.

Wireless keyboard name does not stick, connection lost after reboot/restart

I know this topic has been addressed many times but I might have additional info to this.
I tried to rename my wireless keyboard. The name stays as long as I only let the computer sleep.
As soon as I do a restart/reboot and the connection is lost again, it's name is set back to the old name.
This might be related to the reason why it looses it's connection over and over again.
Does anyone know where this "name" is stored? There must be a plist file or something somewhere where the name is kept, maybe that's the file which is corrupt and must be deleted.
I also was wondering if it is possible to "reboot" the keyboard itself, maybe this setting is stored on the keyboard itself and it cannot properly maintain it.. that might be a reason why for some users the keyboard replacement has helped.
Michael

So, the same problem occurred and in a relatively shorter time than before. I began to think that something is causing this problem.
My theory is that it is a VMWare software issue. What I've been doing differently recently is using it in "Unity" mode as opposed to "Full Screen" mode. My guess is that the program is modifying my wireless permissions and screwing it all up.
So, what I've done is set the "Network Adapter" to "Host-Only". This denies the VMWare program internet access but still allows file sharing between the Windows virtual environment and the Mac hard drive.
Then I had to re-install Mac OS X all over again to fix the wireless settings/permissions mess.

Network savings are lost after system restart

I am new to Unix. I have an Ultra1 170E with Solaris 7. I configured the network with ifconfig hme0 plumb; ifconfig hme0 131.107.x.xxx netmask 255.255.255.0 broadcast 131.107.x.255. However, each time I restart the system it only retains 127.0.0.1. Thanks in advance for your help.

Check the following files:
/etc/hostname.hme0 and /etc/hosts file on your system.
The /etc/hosts file should have the ip address and hostname.
The /etc/hostname.hme0 file should have the ip address of this
machine.
After ensuring the above, reboot the system and it should
show up correctly.
Thanks
-Manish

Nokia 5233 messages lost after phone restart

Hi,
I'm having a weird problem with my nokia 5233. It happened to me twice now that after restarting the device, I would lose all of my messages including messages in my folders and drafts and even sent messages. I have opted to save all my messages in my memory card, which is Kingston 4GB. What might be causing the problem and if I can recover my messages, as I have very important messages in there..........And if there is any solution on preventing this catastrophe again................
Thanks
Iftikhar

This seems to be a common issue with the S60 mobile operating system. No comment from Nokia regarding a resolution so far.
My E75 phone has also experienced the disappearing-messages-act saved in my SD card when my phone restarted from a low battery shut down. Inbox/Draft/Sent Items were completely wiped out.
I tried to change the SMS location from SD Card to Phone Memory then back to SD Card again.
I also tried to (safely & properly) remove the SD Card then reinserted it back. Still no go.
The worst part is that I spent 3 days searching the Internet and found that it's not rare for this problem to occur on an S60 platform yet no resolution from the web nor does Nokia offer any solution to it's customers.
They're about to lose a 12 year loyal and solid Nokia Fan (along with his friends and relatives to migrate to the Blackberry & iPhone Bandwagon) soon if they can't help us retrieve the important messages that was wiped out from our inbox. <sigh>..
Pictures and all other files stored in the SD Card are still intact. It's just my 3,000++ important SMS that's wiped out.

Bookmarks favourites are lost after a restart of computer, why

when I leave Firefox and perform a restart all my favourites that are under the Bookmarks Menu are lost. How do I ensure that they are still available at all times.

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
* http://kb.mozillazine.org/Bookmarks_not_saved

Why my calendar contents lost after sync?

I have set in Settings on calendar to sync all the calendar schedules, but it only appears 1 month ago schedules in my iPhone 4S after sync

so how do I restore them from the backup? And can I just restore the calendar or do I have to restore everything? Is there a way to prevent this happening again? I assumed that synching the calendars would add everything from the phone to the MacBook and vice versa, but it seems the iCal entries override whatever is in the phone.
Thanks for your help

Zen Vision:m content lost after upda

Hi,
I've always owned a Zen Xtra. When there were some firmware updates, their always was a warning that your data would be erased in the release notes.
Now I've got a Zen Vision:m.
Today a new firmware was released, but nowhere on the site I saw this warning.
Is it still so that you loose all your music when you do the update?
Thanks,
Jack

I updated mine this morning and I didn't loose anything.

BUG: Mutitap Preference Lost after Restart

The user's preference for Mutlitap is lost after system restart.
BlackBerry 8130, v4.5.0.77

Verify/repair your disk (not just permissions), in case there is some filesystem corruption, as described here:
The Repair functions of Disk Utility: what's it all about?
This all seems to be caused by downloading the latest Airport update.
You may want to take a look at the following articles for guidelines on how to properly install system updates in case there is something there that applies to you:
Troubleshooting installation and software updates
Installing software updates

WPC Content showing error after portal upgrade to 7.3

Hi All,
Recently we have upgraded our portal from 7.0 to 7.3.We have WPC contents on our portal its was fine till upgrade.After upgrade we are facing issues in all the WPC content.I reproduce the issue and checked the NWA log i could see the below logs.
com.sapportals.portal.prt.runtime.PortalRuntimeException: There is no portal component associated with the following context: pcd:<PCD PATH OF THE IVIEW>
So i thought of creating a new contents as mine was simple but when i navigate to the Web Page Composer ->Web site Management.I could see only the link not the content when i click.Below log i could see after this
cannot find bundle file or key for resource type wpc_site_root, use fallback
No mapping available for requested LayoutController with alias <WpcNavigationLayoutController>
com.sapportals.wcm.WcmException: Error: Archiving Service isn't available
at com.sapportals.wcm.rendering.uicommand.cm.UIAbstractApproveRejectArchivingCommand.setArchivingService(UIAbstractApproveRejectArchivingCommand.java:162)
at com.sapportals.wcm.rendering.uicommand.cm.UIAbstractApproveRejectArchivingCommand.<init>(UIAbstractApproveRejectArchivingCommand.java:42)
Kindly help me to solve the issue.
Naga

<< Do not post the same question across a number of forums >>

CVS keyboard accelerators lost after restart

Hi
I set up accelerator keys for CVS edit (F10) and CVS commit (F11). Whilst JDeveloper is running, these keys work fine and I am able to edit and commit with these shortcut keys.
However, when I restart JDeveloper, the settings are lost and I have to set the keys again - (I have to do this each time I restart JDeveloper).
When I set keys F10 and F11 to other accelerator shortcuts such as make selected or run selected these work fine, even after restarting JDeveloper. The problem only seems to be with the CVS commands.
Do I have to some additional configuration for the CVS accelerators?
I am using JDeveloper 9.0.3.1 and the problem occurs on both Windows XP and SUSE Linux 8.1.
Thanks
Usman

I'm seeing this problem with set accelerators being lost after restart with JDeveloper Preview 10.1.3.0.2.
I set an accelerator to an external tool (Tomcat Startup and Tomcat Shutdown) and the accelerator is gone after I restart JDeveloper.
I apologize if this is a known bug in Preview... I did a cursory search through the forums and only found this one.
Thanks,
Chris

My computor crashed. All my songs in my itunes library were lost. After I restarted my computor, I started a new library with new itune songs. When I tried to download them on my iphone, itunes wanted to get rid of my old songs on my iphone. What can I do

My computor crashed. I lost my music from my itune library. After I restarted my computor to work again, I started a new itune library with new songs. When I tried to download my new songs to my iphone, itunes said it had to erase all my old songs in order to install the new songs. Is there a way to install new songs without getting rid of my old songs?

That is the way the iphone works.
You need to copy everything from your backup copy of your computer.

Content Lost after Portal restart

Similar Messages

Maybe you are looking for