Content Management - What exactly is a primary property

Dear all,
Can anybody tells me what exactly is a primary property in portal content
management?
Regards,
Orion

Orion,
The content model does not distinguish between content and meta-content as many
cm systems do - a node just contains properties. The primary property is there
to distinguish what on the node is the actual content. More specifically, if you
use ShowBinaryServlet or GetPropertyTag, they display the property that is marked
as the primary property.
Regards,
James
"Orion Yiu" <[email protected]> wrote:
Dear all,
Can anybody tells me what exactly is a primary property in portal content
management?
Regards,
Orion

Similar Messages

Data Manager - what exactly is/does that?!

Hi Specialists,
while checking my BW query times (using the technical content / statistics) I realized that the absolutely majority of time is spent for the "data manager".
So the next question was: What's the "data manager"? What is its function and how can I get more detailed information about the time-usage. How can I reduce the time needed in the "data manager"-step.
Could you please gimme some hints or links about that topic?
Searching the help.sap.com and the sdn (using the keywords "performance" and "data manager") didn't bring me far.

The Data Manager step in BI Statistics or an RSRT trace represents the database read time from your infoprovider. There are a number of ways you can improve this performance step (search for OLAP caching, aggregates, or BI Accelerator).

Content copier - What exactly it copies - My exper...

I got a black N79 in India few days back firmware was 20.something. It comes pre installed with many softwares (Theme Diy, SMS Timer, Dictionary, WaveSecure etc. etc) in phone memory and two video tones.
I faced some problem in usng this phone as a modem on my PC and hence I decieded to reset it. I took complete backup of phone by checking every check box presented to me by the content copier applicatio.
Than I tried first with reset factory settings, checked it did not fix the issue. After this decided to hard reset my phone believing that as I am having complete backup nothing will be lost. I did that and much to my amazement I found that after hard reset my memory card was locked (asking for passward). I do not know how I made it work but yes I ended up formatting it somehow.Again I thought fine as I got the backup.
I restored the backup and here comes the fun, all applications and *video tones* mentioned in first parah were gone. dictionary was there but with no database. My two queries here are:
1) Is it usual and expected. If answer is no than I must say that what a **bleep** application is it.(And I mean it as I am a software programmer for years).
2) I got almost all the softwares from internel but no success in case of video tone. Can someone plese share it with me.
Thanks,
Aditya

I did a full backup on my first handset as it was playing up and decided to do a reset. Backup confirmed successful and I backed up all options. Like you, on restore, lots missing.
As my handset problems that just suddenly appeared got worse, I took the handset back and got a replacement anyway. All fine now, but I won't trust the backup software again.
Nokia N8 on O2-UK
Firmware 022.014

Content Management in Sub-Domain vs Primary Domain

I have created a sub-domain (abc.ourURL.com) for one of our
sites (www.ourURL.com). If I make any changes to the primary site,
it is carried through to the sub-domain, and visa versa. Is there a
way to stop this from happening and put a "wall" between the
changes made on one versus the other. If not, we are going to be
forced to move to Joomla.

Have you created a seperate connection to both urls?
Normally it's possible to create seperate connections on one
domain in Contribute, but I only have experience with situations
like this:
site (connection) 1: www.domain.com/
site (connection) 2: www.domain.com/site2/
site (connection) 3: www.domain.com/site3/
I all situations the ftp information only differs in the url
you connect to. The contact info (ftp) is the same at all sites.
I think you should try to set up something like this (or did
you already try that?):
site (connection) 1:
http://www.ourURL.com/
site (connection) 2:
http://abc.ourURL.com/

Content Management in Portal How to

Hi,
I´m Learning XML Forms but I have red that it is too static and I was wondering how do we manage content within Portal and KM? is there another tool to create and deploy content within the Portal? or it has to be developed and called from an iView?
Thanx in Advanced!
Gerardo J

Hello Gerardo,
I agree with you that XML Forms are static, that means you create one form for each common structure document that is to be published.
But this functionality has its own advantage, check this link for more infos:
http://help.sap.com/saphelp_nw2004s/helpdata/en/69/d96b9ba84611d5993600508b6b8b11/content.htm
Once you have your XMLForms ready use these forms to publish documents and then show them in you IView.
Here is a link how you can configure CommandGroups in your IView and show available XMLForms.
http://help.sap.com/saphelp_nw2004s/helpdata/en/8d/2813418366f023e10000000a155106/content.htm
We have also a Business Package easyWCM which stands for "easy Web Content Management" which exactly addresses your requirements.
You can check our product at http://www.easyWCM.com
To get an idea how XMLForms are shown on IViews you can check the screenshot of easyWCM.
Greetings,
Praveen Gudapati

Crawled property category option: "Map all string properties in this category to the Content managed property"

I've been searching online, and haven't been able to find a definitive answer to this. Does anyone know what the following SharePoint 2013 Search Service Application, Crawled property category option does?
"Map all string properties in this category to the Content managed property"
It appears when editing a crawled property category.

Hi Vishal,
There is no Official documentation explaining the setting "Map all string properties in this category to the Content managed property". In my opinion, this setting will map all crawled properties which are in current category and
whose value is string type to the Content managed property.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

What is a content management system how does it work in coldfusion?

hi again
help?
what is a content management system how does it work in
coldfusion?
snippets?
examples in Coldfusion?
thanks

Googleing "content management" brings up 120 million hits.
Good place to start.

What is Enterprise Content Management

hi, all
What is Enterprise Content Management?
is it have same funtionality as DMS
ben

Hi Benaka,
Yes! DMS and ECMS (Enterprise Content Mgmt System) as same functionality.
Document management systems (DMS), sometimes referred to as enterprise content management systems (ECM).
Document Management has some overlap with the concepts of other types such as
Content Management / Enterprise Content Management System , Digital Asset Management, Document imaging,
and Records Management systems.
Thank you,
Regards,
Seema Pilankar

What is Microsoft SharePoint Web Content Management solution?

HI
what is
Microsoft SharePoint Web Content Management solution?
and how i
give details about the technology, usage, and size of the content
adil

HI Adil,
here you are:
http://technet.microsoft.com/en-us/library/jj219688(v=office.15).aspx
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation

Error while trying to edit in Bea Portal Administration Content Management

Hi,
we are exploring the weblogic portal administration 9.2 and we encounter an exception when editing a content in the Content Management feature. We use the weblogic default workflow, we create a user attached to a group, add that group to a role, then delegate the edit and view capability of a content node in the Content Management to that role, we login using the respective user, check out the content, try to edit the property but then the exception occurs.
It says "A Repository Exception was thrown: User does not have view privileges on the node"
the detail exceptio on the property page was:
"javax.servlet.jsp.JspException: Could not find a node at the key: nodeReqAttr
at com.bea.jsptools.content.node.ViewPropertyTag.doStartTag(ViewPropertiesTag.java374)
at jsp_servlet._contenet._node._nodeselected._properties._listpropertiescheckout._jsp_tag46 ...."
Could u help us what step we went wrong, because we previously try this in the WLP 8.1.4 portal administration the exact same step but never encounter this error before.
And is there anyway I can atteched screenshots to help better explain this problem?
Thank you for your help.

Hi,
You have to set your activex control properly. then only edit locally in KM will work.
Also check the below wiki
https://www.sdn.sap.com/irj/scn/wiki?path=/display/KMC/HowtotroubleshootproblemswithLocalEditing
Hope that helps
Raghu

I can't delete a file in the Content-Management

Hello,
I can't delete a file in the Content-Management, altough I have full control.
I get the following error message:
System error (com.sapportals.wcm.repository.ResourceNotFoundException): null
Many thanks for the help.

Dear SAPMuffel ,
As far as we can see the error "com.sapportals.wcm.repository.ResourceNotFoundException" is telling that the resource you are trying to delete could not be found, that is also to say, it might not exist any more.
So please let me know exactly how you can reproduc this issue?
and what kind of file it is? under what kind of KM repository?
Is there any other file under the same KM folder?
Also you can reproduce the issue and then check the lastest defaulttrace file under this folder:
../j2ee/cluster/server0/log/defaultTrace.*.trc
here you can find the detailed exception.
Best Regards,
Thunder

How to See FM (RFFMS007)? What exactly is it?

How to see FM (RFFMS007) in the system?
What exactly is it?
How do we use the tables in SAP?
How to look for tables in FI and FM? What are the uses? How do we see the contents of the tables?

Hello,
Please check all Utility programs in Public Sector Management (PSM-FM)
1. General utility programs
     RFFMMONI (Monitor using PSM settings). This report displays the most important Customizing settings for the update of Funds Management (FM area, OFUP, settings for the update profile). The report also displays customer-specific update profiles that differ from the standard profile that is delivered by SAP.
     RFFMS007 (Activate/Deactivate Document Analysis in Funds Management).
     RFFMS008 (document analysis).
     RFFMS009 (analysis of FM account assignments in posted documents)
2. Special utility programs
     a) Former budgeting
        BPINDAN2_NEW (AVC: Determining the Index for Assignable Element)
        RFFMBUM1 (Display Inconsistency: Total Overall Vals/Annual Vals / Doc.Numbers). This program checks whether the overall values and the annual values correspond with the total of the relevant
        documents.
        RFFMBUM2 (Sum of Period Values <> Annual Values). This program determines inconsistencies between annual values and period values.
        RFFMBUM3 (Budgeting Data without Corresponding Master Data). This program determines inconsistencies on the database.
        RFFMBUM5 (Budget/Release Consistency Check). This program checks in the database whether the release amount exceeds the budget amount.
        RFFMBUM6 (Inconsistencies between Budget Structure and Master Data). You can use this program to determine inconsistencies between the budget structure tables and the master data tables.
        RFFMBUM7 (Display Inconsistency: Total Overall Vals/Annual Vals / Doc.Numbers). This program checks whether the total of the line items corresponds with the overall budget of the relevant record       for the overall values or the annual values of a specific budget type or budget subtype.
        RFFMBUM8 (Display Inconsistency: Total Overall Vals/Annual Vals / Doc.Numbers). This program checks whether the overall budget record for overall values or annual values corresponds with the
        total of the relevant line items of a specific budget type or budget subtype.
        b) Fiscal year change
           RFFMCFM1 (Closing operations monitor). You can use this report to display an overview of the settings that are relevant for the closing operations.
           RFFMCCF_DISPLAY You can use this report to display documents concerning the fiscal year change.
        c) Account derivation
           You can use transaction FMDERIVE to activate the trace. You can reproduce the account derivation during posting as a result.
        d) Payment selection (RFFMS200)
           RFFMS200_TRACE (Trace for Payment Selection Analysis). You can use this check program to analyze a complete clearing lot without debugging the payment selection program or without having to    search for the relevant information in the system.
           FAGL_SHOW_SPLIT Simulation of the document splitting using expert mode -> this is relevant for online payment update.
        e) Federal Government
           RFMFGRCN_RP1 Reconciliation Analysis Report
    3. Matching programs
        RFFMRC04 (for matching line items and the totals record). This report analyzes differences between line items and totals records in Funds Management. If derivations were corrected in the update run, you must set up the availability control (transaction FMBV) again because this control is based on the totals records.
        RFFMRC01 (for matching actual data). This report checks at line item level whether the selected FI documents are updated in Funds Management.
        RFFMRC07 (for payment matching). You can use this report to match the account movements on the bank accounts and the bank clearing accounts of financial accounting with the data in Funds Management and vice versa.
        RFFMRC21 (for the reconciliation of earmarked funds). You can use this report to reconcile documents such as funds reservations, funds precommitments, funds commitments, funds blocking and forecasts of revenue. If the program determines inconsistencies, you can use transaction FMN5N (program RFFMRP03N) to correct the relevant FM commitments.
        RFFMRP07 (for rebuilding sales orders in FM). This program posts selected sales orders and rebuilds the relevant data of the open items in Funds Management.
To understand FM itself (which means all the component/module/area) please check the following menu in help.sap.com
SAP ERP Central Component -> Financials -> Public Sector Management ->
Funds Management
There you will find a lot of information related this component that is integrated with FI, CO, MM, SD, PM and so on.
Best Regards,
Vanessa.

What exactly is the advantage of VPN?

I work in an architectural office of about 15 people. We've always had access to our wiki, files and calendars when out of the office.
Currently we have a Standard setup of Leopard Server with the following services: iChat (using just a private local domain), iCal (with all calendars delegated to one another), AFP file server (3 different groups) and Wiki Server.
What exactly would the advantage be to us of VPN, over simply connecting to a file server via "Connect to Server...", accessing our Wiki via the office IP address, and subscribing directly to our calendars from home?

VPN: Virtual Private Network.
Virtual: implemented without needing specific hardware; uses existing networking hardware and connections. Non-virtual ("real" or "physical") private networks typically involve dragging network wires around or broadcasting signals of your own, or leasing T1 or SONET lines and other such gear from a communications vendor.
Private: A private network is (preferably) difficult to eavesdrop from the open WiFi at the coffee shop, easier to control access. Non-private networks are also known as open networks, and that ftp or telnet or imap/pop password you just entered can be read by others on the same network. That, and the entire contents of the mail messages you have sent and received over the open network are also accessible.
Some private networks are less secure than others. The WEP-based security provided by some WiFi networks is now usually considered to be analogous to a wide-open WiFi; WEP is quite weak, and tools to break it are widely available. WPA is rather better here, and anyone using WEP should move to WPA, or better. (qv: the TJX credit card data exposure was reportedly due to the use of WEP.)
Most VPNs also have some form of authentication; a certificate, smartcard or token card, or other such challenge. Passwords are one of the weakest mechanisms here, but there are VPNs that use just passwords.
+I guess too, there is some additional functionality added. For instance if you're logged into the VPN with a work laptop, presumably if you update your server-based calendar it will update the server as well.+
No. A VPN is and should be assumed nothing more than a network connection. The difference is in the degree of privacy provided. Beyond the encryption and authentication typically inherent, VPNs do not add application-level features over what an open network connection might provide.
An ssh tunnel is a specific form of VPN, and does reasonably well at providing security and at avoiding exposing your password and your data.
Network: as with open networks, VPNs can be used to allow client systems to access a network, or to bridge two or more networks together. VPNs can also provide a reasonable way to manage the connections between these networks, or a client connecting into a network. For the purposes of discussing connectivity, a VPN is another form of a network connection.

What exactly does a new poster have to do to get permission to post images?

Recently there was a forum update that disabled new posters to add images
(AND links?) Supposedly this was to reduce spam. So far so good.
Not surprisingly, immediately after the update we have numerous posts in the Forums Issues forum complaining about this feature and no doubt plenty of users just submitting to this policy in silence.
This whole feature is a SEVERE (that's right. bold AND in caps) hindrance. I don't have the stats, but I'm sure a considerable percentage of
(non spam) original posts are from new users with no previous forum activity. Pictures are especially important in the Chart Control forum as visualization is what charting is all about.
(This is the forum I frequent. So yes, I'm biased.)
Ofcourse, I'm sure the forum developers have weighed the pros and cons and studied the stats and then decided what to do after serious consideration...
The question is: What exactly does a new poster have to do to get permission to post images? Wait for how long? Reply to a confirmation email? "Participate" more?
(Say it ain't so.) How much more?
If there really is a workaround by adding an image tag with the edit html button, I don't want to hear it. It's as silly a way to add images as in the before times, the long long ago.
(Also, if this is possible, this whole restriction feature is actually worse than useless. Spammers will exploit this sooner than later. (A very good point made by our dear friend Quincy in a post that has since been deleted it
seems.))

I believe answering that question defeats the purpose of having the "feature".
I suspected as much.
I was hoping to add some explanation to the chart forum FAQ, I guess "Body text cannot contain images or links until we are able to verify your account."
(if this really is the only message new posters get) will have to do.
I still feel this is more of a hindrance to the quality of the forums than not. As confirmed it seems by Naomi, spammers already have a workaround.
Sipla, it sounds like we should add this FAQ to this article:
http://social.technet.microsoft.com/wiki/contents/articles/7359.forums-help-faq-en-us.aspx
What do you suggest?
What does the message say to the user who cannot post links and images yet? We should map to that language.
Thanks!
Ed Price (a.k.a User Ed), SQL Server Customer Program Manager (Blog,
Twitter,
Wiki)
It says "Body text cannot contain images or links until we are able to verify your account."
If this means you will get a verify email, then you should get a verify email. The message infers that either action will be taken by the forum mods that will be apparent to the user or that the user needs to take some sort of action.
If this is not the case, the wording needs to be changed; it should not mislead you. This is an incredibly vague status message.
I do not have any record of a verify email in my inbox history. All I have is an email this morning from MSDN Site Support (I also posted a request yesterday in MSDN Site Feedback) asking me which account I needed verified. I only have one account.
Almost immediately after I replied, I was able to post links and photos. Honestly I do not know which came first though, the "verification" or my reply to the email or someone noticing the thread about compaining about it a month after signing up.

VDI3: what happens when the Primary VDI core fails?

A potential customer asked me this and I did not really know how to answer the question ... sorry if this was asked before. So here we go:
What happens when and if the Primary VDI core fails? Will the entire VDI3 setup go down? Will running sessions be lost? And how do you fix that?
I found this page:
http://wikis.sun.com/display/VDI3/MySQL+Cluster+Reconfiguration+Scenarios
So I assume the "Non-VDI host ==> Primary Management Host" scenario is what would need to be done?
http://wikis.sun.com/display/VDI3/MySQL+Cluster+Reconfiguration+Scenarios#MySQLClusterReconfigurationScenarios-NonVdiToPrimary
If this is correct then this would answer the "how do you fix that?" part. OK then.
But still I'd welcome if anyone could explain what exactly would happen when and if a Primary VDI core fails. The customer's opinion on this is that they are a "single point of failure" because the Primary VDI host is not redundant (as opposed to the 2 x Secondary VDI cores) ... So, is this assumption correct or not?
Thanks in advance.

Hi,
Assuming you have 3 VDI core hosts. One of them is the primary. And the primary goes down. So what happens then:
* The underlying database is still running on the remaining hosts
* All desktop sessions are still running on the remaining hosts
* New session requests will be handled by the remaining hosts.
* All desktops are still running on the virtualization hosts.
So in essence, your VDI cluster is still healthy. The operation is just impacted in this way:
* You can't add new VDI core hosts
* You can't change the configuration of the Sun Ray server failover group
* A failure of another VDI core host (data node) will result into a complete outage of the underlying database
You should bring up the primary again as soon as possible in order to gain failover capabilities again.
-Dirk

Content Management - What exactly is a primary property

Similar Messages

Maybe you are looking for