Content Methodology or process

What are the rules for developing content?
If I have a project, what is the hierarchy of object?
i.e. do I first create the system(s), then folder followed by pages then worksets and then iviews and finally roles?
What is the preferred methodology and is there a guiding document for this? I did not find it in ASAP for EP6.0.
Thanks
John Ryan

I believe the following is correct:
A page contains iviews
A workset contains iviews and pages
A role contains worksets and pages .
A system is just a reference to a back-end system such as R-3. It might be used for in iviews.
I don't think there is a document on this but I would recommend.
1. Create iviews
2. Group iviews into pages 
3. Create worksets where needed
4. Create pages to include worksets and pages (no iviews directly)

Similar Messages

  • HT201274 How do you cancel the "erase all content and settings" process?

    I started the "erase all content and settings" process and its seems to be taking forever, please how do i cancel the "erase all content and settings" process?

    Welcome to Apple Communities
    Try to turn off your device holding the Sleep button. Then, turn on, connect it to your computer and restore with iTunes

  • Business Content for Business Process Management (BPM)

    Hi,
    Can anyone point me in the direction for documents describing the Business Content (or SAP delivered) construction/development of BPM?
    Thanks!

    Hi Audrey,
    You can have a look at these:
    (Development of the BMP)
    Cross-Component Business Process Management (CCBPM) with XI 3.0
    https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/sap netweaver rig webinar - cross-component business process management with xi 3.0.pdf
    SAP XI 3.0 SP1 - Tutorial Defining a Business Process
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/sap xi 3.0 sp1 - tutorial defining a business process.pdf
    these below you can find at:
    http://service.sap.com/nw04
    SAP NetWeaver in Detail -
    Process Integration -
    SAP Exchange Infrastructure -
    Media Library -
    Miscellaneous
    SAP XI 3.0 - Cross-Component BPM (Virtual Classroom)
    https://websmp101.sap-ag.de/~sapdownload/011000358700005239612003E/V00512_Volmering_221003.vcm
    SAP XI 3.0 - BPM Click-through 1 (SAP Tutor)
    https://websmp101.sap-ag.de/~sapdownload/011000358700005237162003E/ccBPM_Lev1_MergeSplit.sim
    SAP XI 3.0 - BPM Click-Through 2 (SAP Tutor)
    https://websmp101.sap-ag.de/~sapdownload/011000358700005239282003E/ccBPM_MergeSplit.sim
    Regards,
    Michal

  • Methodology or Process Documents for new XI implementations

    Hi All,
    Can someone point me to any docs on Process/Methodology new XI implementations.
    Thanks & Regards,
    Nandini

    Nandini,
    Please refer the below thread and look for the URL I gave over there
    Re: XI template documents
    Best regards,
    raj.

  • Content Methodology for Autonomy Search

    I have a general question about content and how to use it with
    Autonomy. If you load all of the content into the /dmsbase directory
    and then try to use Autonomy to search that directory how do you
    display it since dmsbase is not exposed via the webapp. I currently
    have Autonomy up and running and indexing off of the dmsBase
    directory. The search works great but how do I click on the results
    and have them come up since the dmsBase directory cannot be access via
    a URL.
    Thanks in advance
    Mark

    Harish,
    One simple way is create a navigation bar in the content area you are interested in searching, containing just the search element, and expose that navigation bar as a portlet.
    Now you can add this portlet to any page and the search will search only on the content area it belongs to.
    null

  • Change contents inside BPEL process

    Hello everyone,
    I want to change the values insides the BPEL file during deployment to weblogic server.
    Please let me know how it can be achieved?
    Is it possible with configuration plans?
    In BPEL process we are hardcoded some value as xml fragment so we want to change them during deployment of JAr file.
    Please help me out on this issue as early as possible.
    Thanks in advance,
    sk

    <sequence name="main">
    <!-- Receive input from requestor. (Note: This maps to operation defined in SiebelHeaderPOCBPEL.wsdl) -->
    <receive name="receiveInput" partnerLink="siebelheaderpocbpel_client"
    portType="ns1:SiebelHeaderPOC_Connector_type"
    operation="SiebelHeaderPOC" variable="inputVariable"
    createInstance="yes"/>
    <!-- Generate reply to synchronous request -->
    <assign name="Assign1">
    <copy>
    <from><wsse:Security xmlns:wsse="http://schemas.xmlsoap.org/ws/2002/07/secext">
    <wsse:UsernameToken xmlns:wsu="http://schemas.xmlsoap.org/ws/2002/07/utility">
    <wsse:Username>username</wsse:Username>
    <wsse:Password Type="wsse:PasswordText">Password</wsse:Password>
    </wsse:UsernameToken>
    </wsse:Security></from>
    <to variable="Security"/>
    </copy>
    In above code, we have used xml fragment to set username and password. So we need to change them during deployment time.. This is my exact requirement
    The deployment descriptor is very useful but that can't be used inside xml fragment.
    Please help me on this issue.
    Edited by: 839026 on Nov 21, 2012 1:26 AM

  • If i switched off me phone during "earse all contents and setting" process going on now my phone is showing only an apple logo now what should i have too do to get my menu screen

    plz suggest me urgently,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

    Good call Paul.
    Have removed my post as no longer revelant based on paulcb's post.
    Message was edited by: The Huntress

  • Error in installing process chain from Business Content.

    Dear Experts,
    I have successfully installed the Technical Content from Business Content and now trying to install Content Master Data process chain for info package for the same but its showing error.
    <b>Technical Name for Process Chain : 0TCT_MD_C_FULL_P01</b>
    Error after instaling from BI Content : <b>Process AND has no predecessor.</b>
    Finally, while checking in RSPC it comes the name of Process Chain but its not showing anything.
    Also, one more thing is I am trying to install in development system and if that occurs successfully than transport to production as production directly don't wanted to do.
    Thanks in advance.
    Regards,
    NJ

    ithink u have not activated the process chainafter creating the process chain u might have saved it with out activating the process cahin so that is the reason why it is showing name name but northing in the chain first activate the cahin then it iwill show
    try this
    Aravindan pagadala
    satyam

  • How to process Excel attachment contents?

    I'm looking to read excel attachments to an instance and use attachment contents in the process. Any help will be highly appreciated.
    Thnx,
    MK
    Edited by goelmk at 11/19/2007 10:19 AM

    I can think of two alternatives:
    1- Use COM (introspect Excel, and use it to open the files)
    2- Use a Java library that can read Excel (for example:
    http://poi.apache.org/ )
    You must first download the attachment to a temporary folder. The filename
    should be unique (i.e.: you can use the instance number as part of the
    name 'this.id.number')
    The following code should download all attachments:
    bytesWritten as Int
    fileName as String
    files as String[]
    //Download all attachments
    for each attachment in attachments
    do
         fileName = attachment.fileName + "_" + this.id.number
         writeFromBinaryTo BinaryFile
              using data = attachment.contents,
                   name = fileName,
                   append = false
              returning bytesWritten
         if bytesWritten != attachment.contentSize then
              //Something is wrong, handle de error...
         else
              files[] = fileName
         end
    end
    for each file in files
    do
         //Use the desired API to process each of the files
    end
    Which choice of API you use, depends on the environment, performance
    constraints, etc. If you choose COM, you must make sure that the
    downloaded files are available on the machine where the COMBridge is
    running (for example by using a network share), and that you're not
    overloading Excel (i.e. not too many concurrent instances, Excel is not
    intended for heavy concurrent use).
    POI should be easier to work with, but your mileage may vary depending on
    how 'standard' the Excel files are (macros that run on load, probably
    won't work).
    Hope this helps,
    Juan
    On Mon, 19 Nov 2007 15:19:36 -0300, Manoj Goel wrote:
    I'm looking to read excel attachments to an instance and use attachment
    contents in the process. Any help will be highly appreciated.
    Thnx,
    MK
    Edited by goelmk at 11/19/2007 10:19 AM--
    Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

  • Importing Process Integration Content

    Hi!
    I am about to configure SAP PI. The step I executing:
    Importing Process Integration Content 
    Question:
    which Process Integration Content do I need when I use SAP NetWeaver 7.0
    (PI_Basis_2005_1_700)?
    Thank you very much!
    regards

    Hi!
    Thank you!
    Unfortunately PI_Basis_2005_1_700 does not solve the problem.
    I imported the SAP_Basis component and now I can access to Configuraiton.
    Thank you!

  • Modify jsp content (before the jsp processing!)

    Hi!
    I would like to modify the jsp content before jsp processing (like at tags, but there the outgoing HTML content is modified not the clear jsp)
    So this is what is want: for example i would like to introduce a tag and this tag will modify the jsp content (it will put some jsp lines) and after the whole jsp will be processed and we get a HTML what is displayed in the client.
    for example this is the JSP:
    <html>
        <body>
            <mytags:grid data="apple,lemon" />
        </body>
    </html>it will change to this (for example):
    <html>
        <body>
            <% String data = "apple,lemon"; %>
            <jsf:grid data="<%=data%>" />
        </body>
    </html>the container will process this and generates a HTML page.
    So is there any chance to do this?
    Thanks!
    ric flair

    Here is an example:
    If you put the following in the JSP page, the JSP page will outtput one of the two html tags specified.
    Note this example uses java scriptlets (the html is sent to the client, not the scriplets).A better approach is to use JSTL.
    A book on JSP will better explain the use of JSP.
    <% if ( item.length()>0 ){%>
    <input type="text" name="firstName">
    <%}else{%>
    <input type="text" name="firstName">
    <%}%>

  • Extraction of solution manager ticket content

    Hello Experts,
    I need to extract the content of each ticket recorded in solution manager including Issue descriptions, solutions recorded in the ticket etc.  May I know if there is any standard report or if they are stored in a transparent table?
    Thanks a lot in advance!
    Susan

    Hi Andreas,
    thanks for posting your opinion to the topic. What I´m looking for, is the right link to support a process driven SAP-implementation process. The question is, which is the right tool or repository to collect implementation know-how and information about SAP-defined or in anterior projects defined individual business processes and the enabling systems, transactions, services ...
    There is such functionality in SAP Solution Manager.
    Are there other products, repositories I have to look on, or do you think Solution Manager is the organisational SAP-governance plattform to link implementation methodology, business processes, configuration and functionality?
    I´m not believing in anything in that question! I´m only looking forward to your individual opinions about that issue to form a view on it.
    Thank you all!
    Jens

  • Sender Mail Adapter Error: exception caught during processing mail message;

    HI , I am configuring mail to file scenario. Need to read mail content (no need to capture From,TO or Subject details) and create a file with the content in the mail.
    Need to read mails from microsoft outlook. Exchange server has been configured for POP3 protocol.
    Following are the details provoding in sender mail adapter:
    URL: provided url in the format: pop://<server name>
    Authentication method: plain
    provided user credinetions to access mails.
    poll interval - 1min
    content encoding none.
    processing parameters : quality of service-exactly once
    Since there is no need to capture From,TO or Subject details, didn't select the option - use mail package.
    Verified for unread mails in the mail box and made sure that there are few unread mails.
    Also, created data types and other components in IR and completed mapping.
    But after starting sender mail communication channel, getting error "exception caught during processing mail message; java.lang.NullPointerException" in RWB-adapter-communication channel monitoring.
    please let me know what needs to be done to resolve this error.
    Thanks.

    HI Stefan, i tried, but still it is giving same error. Yes, i am able to access outlook mail with the user credentials given in the communication channel to access exchange server.
    I am using message protocol: xipayload . Also since i dont have to capture TO,from,subject details., created data type just with one element of type string, not in the standard format .Does this makes any difference.

  • Process Chain error while creating index on cube

    Hi All,
    I have two process chain P1 daily(except sunday) and P2 weekly(sunday), both have same process, i.e. cube C1 is loaded with same infopackage in both infopackage.
    Now, on saturday after laoding the content index creating process on cube c1 is failed by process chain P1, but on sunday P2 have laoded C1 correctly and created indexes.
    Now, my doubt is wheather i repeat process chain P1 from creating indexes or there is no need as indexes on cube are created by PC 2.
    kindly suggest,
    Regards,
    Rajvinder

    Hi Raj,
    There is no need of running the process chain P1, the data has been bought by the process chain P2.
    If there are any filters/data selection in infopackage level then you need to run the process chain P1.
    Be make sure about the process chains and there infopackages/dtp's.
    With Regards,
    Ravi Kanth

  • Monitoring BI PROCESS CHAIN with Solution Manager BPMON

    Hello,
    I'm trying to setup the monitoring of BI process chain using the BPMON
    I setup the process chain monitoring using  BPmon application monitoring "BI Process Chain Monitoring" (BOBIPCMO)
    but than I'm not able to read the process chain names,steps,and variant from satellite system
    On other systems,using different application monitor (like PI MONITOR) is working fine
    i'm using the latest plug-in ST-A/PI 01L_BCO700 on entire landscape
    My bi system is 7.01 EHP1 sp4
    solution Manager is 7.01 EHP1 SP20
    Any suggestiions?
    Thanks
    Marco

    Hello Marco,
    the problem is that the Process Chain monitor is not yet available with ST-A/PI 01L*. Unfortunately the empty hull that you see during the setup was shipped without the proper content. The Process Chain monitor will be properly shipped with the next ST-PI and ST-A/PI combination in Q2/2010.
    Sorry for any inconvenience caused.
    If you want to have this monitor earlier on it could be implemented via Customer Exit in case that you have some MaxAttention or Safeguarding engagement.
    Best Regards
    Volker

Maybe you are looking for