Content not appearing on restricted windows account

Hi all,
I have a flash file in which certain items are set to Export
for AS.
"Export in first frame" is unchecked and those items are
placed on the
stage some frames after frame 1 to allow for a small loader
bar.
All's fine on a whole lot of machines (Mac, PC and all sorts
of
browsers) except for a group of PC's which run on a
restricted
useraccount and run only Internet Explorer. On those machines
the items
set to "Export for ActionScript" but not in frame one are not
shown.
Does anyone have any ideas?
QAD workaround I suppose could be to have it all load in
frame 1 and if
needed built a separate preloader but I would prefer to keep
it all in
one file...
thanks in advance,
Manno
Manno Bult
http://www.aloft.nl

You would add a new collection to your public site through the Collections Manager page and via a provider hosted RSS feed. For more information, please see - http://deimos.apple.com/rsrc/doc/UsingiTunesUPublicSiteManager/AboutCollectionPa ges/chapter_6_section_2.html#//apple_ref/doc/uid/iTUPSM-CH6-SW3
-Thanks

Similar Messages

New Content not Appearing in Tabs/Windows

At least half of the time when I click on a link that opens in the same tab, or enter a query (eg, a search term on the Wikipedia main page), the content in the window does not change. Once or twice it was a little slow, and it appeared that the window did change for a second, but then went back to the same content (eg, Wikipedia main page with an empty query field, or the page that displayed the tab that I clicked on). I can often get to the content I'm seeking in a new tab by using CTRL>Click, nut often that doesn't work (probably because of the coding on the original web page?)
This is happening at least half of the time. I've done all the usual fix attempts, including updating Firefox, clearing cache and history, disabling add-ons, but the problem still happens.
I am running Firefox 7.0.1 on Windows Vista 64b Home Premium (it happened on earlier versions of Firefox too), on an HP laptop that's about 2 years old.
I can't find any information on the web or Firefox knowledge base about this, as though it hasn't happened to other people, but I'm sure it has. Any help would be GREATLY appreciated! Thanks!!

upgrade your browser to Firefox 9 and check
* getfirefox.com

HT201317 My photos taken from my iPhone are not appearing in my iCloud account

My photos taken from my iPhone are not appearing in my iCloud account home page. In fact there isn't even a photo icon on my iCloud homepage. In the settings section of my iphone, I have the Photo Stream turned to "on" within the iCloud setting so i'm not sure what the problem is. Any thoughts?

Everything is fine, because there is no web application for photos at the moment. These are the options to view your Photo Stream:
-On your iPhone, iPad or iPod touch, your photos will appear in the Photos app in the Photo Stream album.
-On your Mac, they appear in the Photo Stream view in iPhoto or Aperture.
-On a PC, your photos download to the Photo Stream download folder. By default, this folder is located at C:\Users\Apple\Pictures\Photo Stream\My Photo Stream. You can change this location by visiting Photo Stream Options in the iCloud Control Panel for Windows.
-On Apple TV, your photos will appear in the Photo Stream view under Internet in the main Apple TV menu after you sign in with your iCloud account.

My iphone 4 does not appear in my(windows 7) lap top, when i connect i can hear the sound of usb connected, but its not appear in the itunes or computer, and its not charging as well, bit confusing

my iphone 4 does not appear in my(windows 7) lap top, when i connect i can hear the sound of usb connected, but its not appear in the itunes or computer, and its not charging when i connected to the laptop as well, bit confusing, help please

Take a look at this link, http://support.apple.com/kb/TS1538

Content is appearing in external window instead of presenting in Iview

Dear Experts
We are using Team Viewer Iview of MSS, the content is coming from R/3 system. but the content is appearing in External Window instead of appearing in the IVIew itself. This Iview has the tray which is blank and content in external window.
This applicaion works good for all the other languages except for French users.
Could you please tell us what could be the reason content is appearing in external window instead of presenting in Iview.
Thanks & Regards
Prasad

Hi Mike and
Thanks for responding.
So ur using a sap transaction to ECC? -
> No
Are you saying that when you log in the portal you see a tab and clicking of the tab produces additional navigation. When you click the additional navigation you see the iview.
When you click the iview instead of being displayed in the portal content area it opens a new window? -
> Yes
Are there any other iview within this navigation that display in the portal content area? ---> Yes
I have checked the properties open in new window or launch in new Portal content area all these are set perfectly but the content alone is appearing in external window only for French Users. we want the content to be appear in IVIEW of same portal screen.
Regards
Prasad.

Unread email notifications do not appear in my Gmail account on Mac Mail?

I am driving an iMac (intel), OS 10.9.3. My unread email notifications do not appear in my gmail account. I have tried everything that I can think of...

Try rebuilding the mailbox. This can take awhile if you have a lot of mail.
Rebuild mailbox
Try re-indexing the mailbox. This can take awhile if you have a lot of mail.
Reindex messages

Itunes store content not appearing in itunes

When I click on the iTunes Store button, nothing appears in the window. I can get to my account information, but I cannot get to any content in the iTunes store.

Hey jorox_jorox,
The first thing I'd start off with is going through the steps in the following document:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Have a great day,
Delgadoh

IPod Touch not appearing in devices windows 7 x64

i have itunes on my hp notebook running on windows 7 x64. recently, my notebook crashed and was returned to me with a new drive c: and default factory settings (i.e brand new). i installed itunes and then... my itouch wasn't able to sync! it is not even appearing as a portable camera device (before my notebook crashed, it did). i went to check other forums and tried out the various apple support article (e.g. uninstall (4x already!), update drivers, restore itouch etc.etc.etc.)
anyway, when i run services.msc and check apple mobile device, the service is not started. when i start it, it says "The apple mobile device service on Local Computer started and then stopped. Some services stop automatically when they are not in use by other services or programs)". I reckon this is what's stopping my itouch from being recognised and syncing to itunes. Talked to a itunes champion and he couldnt help.
Would deeply appreciate it if someone can help me. Been spending christmas and new year's cracking my brains over this =/

Try taking a photo with your iPod and see if it then appears as a camera device.
(I am really new at this but I had mine appear as a camera because of 1 picture I took. When I deleted it, it does not appear now but I can still get into itunes.)

Mail sent from iPad not appearing on desktop (windows) pc

Have had to change my BT Yahoo email account to BT Mail so on the iPad deleted the BT yahoo account and then added the BT mail account. Problem is that mail sent from iPad no longer appears on the (windows) pc. What am I missing
ipad iOs 7.1.2

If it is IMAP, then obviously something is wrong. I don't know if there is a problem on the computer setup. Are you sending the email from a web browser or from an email client? I don't think that should matter anyway unless you have incorrect settings in the email client.
Have you tried sending an email from your computer and see if it shows up as sent mail on the iPad? Have you considered deleting the account and then add it back yourself on the iPad?

ITunes miniplayer not appearing in taskbar Windows 7 64-bit

I am currently trying to add the little miniplayer in my taskbar, but it does not seem to work.
When I right-click my taskar and I go to Properties>Toolbars>Check iTunes and click Apply and close.
When I re-open iTunes and minimize it, it does not appear.
Then, when I go back to the properties of the toolbar the iTunes checkbox is UNCHECKED.
Does anyone know how to fix this?
I am running Windows 7 64-bit Home Premium and I am currently using iTunes Version 10.7
Thank you for your help!

I spent some time on the phone this morning with Apple. Here's a link they sent me: http://support.apple.com/kb/HT1923
It's more than just uninstalling Itunes; there are 5 other apps that have to be uninstalled and in specific order. This particular Knowledge Base article applies to Windows Vista or Windows 7. For other Windows versions you'd have to look up the article for Windows XP.
Hope this helps.

Time Machine: Excluded Items Do Not Appear In Excluded Window

Greetings,
I have been successfully using Time Machine for some time now. I switched to Lion about 5 weeks ago and I have also recently added a second TM 1TB Backup Drive (SeaGate) to use as an off-site backup of my 1TB External Media Drive (iOmega) and my entire 160GB Internal Drive. I have also restructured the Folders on my 1TB External Media Drive which would've effected the file path of almost every file. I have been experiencing a multitude of issues since then.
1. For the first time, I have been getting error messages telling me that the backup drive is full. I am only backing up a total of 782GB on the External and 133GB on the Internal (915GB Total). So to get around this I have been using the Exclude feature. This is where the next issue occurs..
2. When I add Folders to the Exclude list, they do not appear in the Exclude window; however the "Estimated size of full backup" dialog at the bottom right adjusts to reflect the changes. I cannot delete or use the "-" to remove folders from the list, because they do not appear to be there. I seem to be able to get around this by turning the TM Off then On again, but the trouble doesn't end there.
3. Once I have excluded enough folders for the backup to be small enough and I begin the backup, TM displays the "Preparing Backup" message for quite sometime. During this time several things tend to happen:
a) the entire computer begins to run VERY SLOW, with the PinWheel of Death showing up frequently
b) about every other time, the TM Preferences window crashes and displays an error message saying it encountered a problem and had to close
4. Even if I could successfully use this method of backing up 1 large folder at a time, it becomes very confusing as to what has been backed up recently and what still needs to be backed up. It basically goes against the entire idea of having an automated backup system to have to split up the backups in that manner.
I am very frustrated, as TM has traditionally been a trouble/worry-free system for me. I have seen many posts regarding the various error messages i've received but no one else is complaining about this Exclude issue. I am most appreciative of any help you may offer.
Thanks!
PW

Hi,
TM has never worked satifactorily for me, itworks for Pondini though!
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/
Or the most expensive one & my favorite, Tri-Backup...
http://www.tri-edre.com/english/products/tribackup.html
AppDelete...
Back to your problemmm
Turn off TM, Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, trash this file...
/Users/YourUserName/Library/Preferences/com.apple.TimeMachine.plist
Reboot & try TM again.

Where can I find a ringtone I paid for but it is not appearing in my itunes account

where can I find I ringtone I purchased but it is not appearing in my ringtones on my phone?

Select Ringtones under Library left side of the iTunes window. If you see the Ringtone there, connect the iPhone to your computer,
select the iPhone under Devices on the left then select the Ringtones tab then click Sync.

.MOV video clips do not appear in project window

I've imported .MOV clips but while they display thumbnails, they do not appear in the project window. Is there a way around this?
Thanks, David

By complete accident I discovered that I had to display advanced tools and then select the edit tool. Then when I selected a clip in the thumbnail window it appeared in the project window. However, I'm now puzzled about how to edit the start and stop points of a clip. Before I got the clips in the project window I was able to select a portion of a clip and clip the reject (X) tool and then move the rejected portion to the trash. Now that the clips are in the project window I'm trying to use the tool to trim the start and end of the clip but it isn't cooperating. What's the process?
Thanks for your help.

Receiving mail using postfix ... does not appear at my user accounts

Hi all,
I've turned on postfix and imap access at my home computer (I'm running Tiger, not Mac OSX Server).
Everything seems to be working fine (sending mail trough SMTP and logging in to my home by IMAP), except that I cannot see the mails sent to my user account(s).
I know that the e-mails get at my set up mail server at home since I can see that in the logs, but no mail appears at my user accounts.
For instance, have have an user account [email protected] and I can loggin trough IMAP at this email account and the emails I send from my gmail account reach jon.myserver.com ... but I cannot read those mails anywhere since they don't appear.
Can anybody help me and tell me what am I missing?
Cheers,
Bruno
Intel iMac Mac OS X (10.4.8)

Well, the problem seems to be with the IMAP server
(not postfix).
I simply don't have an INBOX file were my IMAP server
seems to deliver the e-mail.
This seems to be part of our problem communicating. An IMAP server doesn't deliver email. It's what your mailreader contacts to view or deliver mail. You must be using OSX Server, I don't think there's an IMAP server for OSX.
When mail arrives at your Mac, two basic things happen. We lump them under the label postfix. The first thing is that the SMTP server accepts the mail. The second is that the local process "delivers" the mail. This can be difficult to set up, but the main thing is to put the local delivery path in the alias map file you set in /etc/postfix/main.cf. This is /etc/aliases by default.
To read mail, your mailreader can simply open the mailbox where the file was delivered. /usr/bin/mail will work fine. Fancier mailreaders like Apple Mail use protocols like POP3 and IMAP4 to retrieve mail from remote servers. But this case is different. IMAP seems like overkill since everything is local. I would try putting the alias to the directory that Mail uses. But then, you never said what your mailreader was, so I don't know.
I think we can solve this, but we need to get over some confusion first.
-Phil

Mail sent from my iPad does not appear on desktop (windows) pc

Have had to change my BT Yahoo email account to BT Mail so on the iPad deleted the BT yahoo account and then added the BT mail account. Problem is that mail sent from iPad no longer appears on the (windows) pc. What am I missing
ipad iOs 7.1.2

If it is IMAP, then obviously something is wrong. I don't know if there is a problem on the computer setup. Are you sending the email from a web browser or from an email client? I don't think that should matter anyway unless you have incorrect settings in the email client.
Have you tried sending an email from your computer and see if it shows up as sent mail on the iPad? Have you considered deleting the account and then add it back yourself on the iPad?

Content not appearing on restricted windows account

Similar Messages

Maybe you are looking for