Content Not Coming Properly after converting a Smartform to PDF.

I am converting a smartform into PDF format using CONVERT_OTF .
This smart form will be triggered from the portal at the occurance of an event .After Conversion some texts are properly outputted in the PDF but some texts which are in arabic are not coming properly ( shows some junk data in a language other than Arabic).
Can any give a Solution ??
Thanks
Chaitanya Sharma
Edited by: chaitanya sharma on Jan 28, 2009 2:15 PM

hi
try using this fm CONVERT_OTF_2_PDF
hope this helps
regards
Aakash Banga

Similar Messages

Theme not coming properly

Hi Experts,
We are having Federated Portal and the custom theme XYZ is developed in Consumer Portal. The ESS/MSS iviews are linked through Remote Role Assignment from Producer portal.
The theme is not coming properly. From Mashead to Top level navigation the theme XYZ is coming correctly but when I opens the page having iviews then the iView Tray is showing the SAP Standard theme and the content in the iView is sometimes taking correct XYZ theme.
I have cleared Federated cache, navigation cache and also cookies, but still it is not coming properly.
When I view source iView then
<html><head><LINK REL=stylesheet HREF="/irj/portalapps/com.sap.portal.design.portaldesigndata/themes/portal/sap_standard/prtl_std/prtl_std_ie6.css?7.1.6.0.0">
Please suggest.
Regards,
Deep

Try by re-starting the portal.
This is rarely necessary when dealing with the SAP Portal theme.
The advice from Sushil looks more like the solution as it is common to not upload the consumer portal theme in the producer portal. Because in an FPN the producer theme will be used when the consumer theme isn't found:
[SAP Note 880482|https://service.sap.com/sap/support/notes/880482]
http://help.sap.com/saphelp_nw04s/helpdata/en/5b/9f2d4293825333e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/46/06f6dc000a5a68e10000000a1553f7/content.htm
"If you are using custom made themes or have modified any of the out-of-the-box themes on the consumer portal, an administrator must manually import these themes to the producer portal. "
Next source of problems with themes is when your consumer and producer are on a different version (specifically when the producer is on a higher SPS or EHP) even when the consumer theme was imported into the producer.
br,
Tobias

SAP is not coming up after installing Java Add-in

Hi,
I have installed a Java Add-in for an existing ABAP system. At the stage of "start J2EE engine" it is throwing an error message saying that Java is not coming up after 1142 seconds. I checked config tool and it is working fine. I restarted SAP. After restarting SAP, SAP is coming up and after 1 or 2 mins the disp+work is getting stopped and all the work processes are getting died. I couldn't able to understand & resolve the issue. The system is NetWeave 04. Here is the dev_w0 trace information.
*dev_w0 trace file information*
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B
B Thu Feb 05 12:06:29 2009
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c      4489]
M sysno      00
M sid        IDS
M systemid   560 (PC with Windows NT)
M relno      6400
M patchlevel 0
M patchno    247
M intno      20020600
M make:      multithreaded, Unicode
M pid        4780
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4780) [dpxxdisp.c   1170]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm)          20328     (1452)
M DpShMCreate: sizeof(tm_adm)          2969176     (14772)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpShMCreate: sizeof(comm_adm)          290000     (580)
M DpShMCreate: sizeof(vmc_adm)          0     (424)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 07530040, size: 3391480)
M DpShMCreate: allocated sys_adm at 07530040
M DpShMCreate: allocated wp_adm at 07531B88
M DpShMCreate: allocated tm_adm_list at 07536AF0
M DpShMCreate: allocated tm_adm at 07536B18
M DpShMCreate: allocated wp_ca_adm at 0780B970
M DpShMCreate: allocated appc_ca_adm at 07811730
M DpShMCreate: allocated comm_adm_list at 07813670
M DpShMCreate: allocated comm_adm at 07813688
M DpShMCreate: allocated vmc_adm_list at 0785A358
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0785A380
M DpShMCreate: allocated wall_adm at 0785A388
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X
X Thu Feb 05 12:06:30 2009
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Feb 05 12:06:31 2009
M calling db_connect ...
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c      4489]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c   1283]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9708]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server ord-sapproj_IDS_00 on host ord-sapproj (wp 0)
M * ERROR       tskh_init: db_connect
M *
M * TIME        Thu Feb 05 12:06:31 2009
M * RELEASE     640
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        9893
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4780) [dpnttool.c   357]
Kindly help me in getting the solution ASAP.
Thaks in Advance.
Kind Regards,
Mogileeswar

Your profile parameters are messed up; check your instance profile has below parameters:
jstartup/trimming_properties = off
jstartup/protocol = on
jstartup/vm/home = /opt/java1.4
jstartup/max_caches = 500
jstartup/release = 700
jstartup/instance_properties = $(jstartup/j2ee_properties):$(jstartup/sdm_properties)
j2ee/dbdriver = $(DIR_EXECUTABLE)/db2jcc.jar:$(DIR_EXECUTABLE)/db2jcc_license_cu.jar
rdisp/j2ee_start_control = 1
rdisp/j2ee_start = 1
rdisp/j2ee_libpath = $(DIR_EXECUTABLE)
exe/j2ee = $(DIR_EXECUTABLE)/jcontrol$(FT_EXE)
rdisp/j2ee_timeout = 600
rdisp/frfc_fallback = on
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00

Aluminum Wireless Keyboard not working properly after Firmware update 1.1

Hi,
Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
Thanks in advance.
Franco.

I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
Steve

ITunes / iPhone not working properly after newest update...

iTunes is not working properly after the newest update... It dosen't see my iPhone, the program acts very sluggish, and has trouble loading the Store. Anyone have a solution or an explanation? I have tried the suggestions found in other threads ie. restart, re-download, charge phone, restart phone and so on. Nothing works. Everything was working fine until iTunes and the new ios were installed. After that it all went to crap. Thanks, Randy...

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

WBS element output not coming properly .

Hi ,
I have a customized report with , project(proj-pspid) ,wbs element( prps-posid) as selection parameters . The output is coming preperly when project is given as output but is not coming properly when wbs element is given as input. I am using PSJ logical database . Not sure why in debugging while giving only wbs element it is going to 'Conversion_exit_abpsn_input' instead of teh conversion exit 'Conversion_exit_abpsp_input' . Any idea on how it can be resolved?

Hi,
Please refer the WBS element to PSPNR (PRPS-PSPNR) instead of prps-posid ,
prps-posid refers to exit 'Conversion_exit_abpsn_input' and not 'Conversion_exit_abpsp_input'.
Regards,
Srini.

Condition value in billing not coming properly.

Hi All,
We have an issue wherein the condition value in billing document is not coming properly.
When qty is multiplied by the price the value should come as 208.04 ( 54.51 * 4 qty ), but the condition value is coming as 16.77.
We checked but could not find any proper reason for this.
When checked in details of condition type, we can see the Condition Origin as manually entered, but we are ot ale to trace the changes and also who entered the condition manually.
Kindly advise on the issue as it

Hi Mr. Satish,
I agree with Mr. Rajesh and for your 2nd question.
We can easily track down who entered the condition type in order
there are two possiblities
Either user who created the order, enter that condition type, that will not recorded in the changes so you can see the user id at header level--> on sales data page "Created by"
If some other user come in VA02 and enter the condition type then you can see it in
Go to Menu "Enviroment" --> Click at changes --> your document number is there --> Execute and see who entered it
Regards
MT

My Iphoto does not work properly, after downloading Mavericks. How can I fix it ? loading Mavericks

My Iphoto does not work properly after downloading Maverick. How can I fix it ?

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you mean by not working properly? Explain in detail.
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

Smart form -Right Alignment is not coming properly

Hi Folks,
While Printing Smart form for Invoice ,using right aligned Paragraphs texts are not coming properly.....but using left aligned paragraphs text are coming proporly....we want both left aligned and right aligned in same table ...for print preview it showing fine but while taking the print out it comes like this
for eg: ---
Net amount
1,000.00
      750.00
2,000.00
        40.00
      100.00
      300.00
30,000.00
O/P showing like this ....i have checked all the options in right aligned paragraph but no use
Kindly help ....
Edited by: bismilpk on Dec 26, 2010 2:31 PM

yes .....I solved....got the answer

Camera not working properly after ios7 upgrade in iphone 4s

Iphone 4S
Camera not working properly after iOS7 upgrade.
It defaultly takes other effects that is chrome in filter section, once we wdit in phone it can brought to normal (without filter)
help me to solve this problem

Have you tried a battery pull? If the issue is still there, you can either take it to the store or downgrade your software to the previous version to troubleshoot.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Jave is not coming up after SID refresh where as ABAP is Up

Recently I completed system refresh for Solution Manager 4.0 with DB SQL Server 2005 on Duel stack and Java is not coming up after SID refresh where as ABAP is Up.
Please advise where to check as i check Disp log and Java Dispatcher is not coming up and giving error DB connection.
Thanks
Sachin Sachdeva

How did you do the refresh? What method, export with SAPINST(both ABAP and Java)?
Post the DB connection error you are getting.
Can you connect to configtool?
Message was edited by:
Derek Galt

CSS Service not coming up after reboot

I installed oracle 10.2.0.2 (X86_64) on SLES 9 (x86_64) NON_RAC (single instance with ASM) and the CSS service is not coming up after reboot. If i do localconif reset then it starts up but fail after every reboot. Here is the data to debug:
This is the tail of my $ORACLE_HOME/log/servername/alertservername.log
2008-03-06 22:16:32.587
[client(13472)]CRS-1006:The OCR location /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is inaccessible. Details in /u01/app/epsora/product/10.2.0/log/pune-srv-eps-02/client/clscfg_13472.log.
2008-03-06 22:16:32.588
[client(13472)]CRS-1006:The OCR location /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is inaccessible. Details in /u01/app/epsora/product/10.2.0/log/pune-srv-eps-02/client/clscfg_13472.log.
2008-03-06 22:16:33.217
[client(13472)]CRS-1001:The OCR was formatted using version 2.
2008-03-06 22:17:54.615
[cssd(13670)]CRS-1601:CSSD Reconfiguration complete. Active nodes are pune-srv-eps-02 .
u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is accessible through oracle user:
$ls -l /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr
-rw-r--r-- 1 epsora epsdba 364544 2008-03-06 22:16 /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr
This is the log file mentioned in above file:
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracl
e. All rights reserved.
2008-03-06 22:16:32.579: [ OCROSD][2546869600]utread:3: problem reading buffer
5db000 buflen 512 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.580: [ OCRRAW][2546869600]propriogid:1: INVALID FORMAT
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]ibctx:1:ERROR: INVALID FORMAT
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]proprinit:problem reading the boo
tblock or superbloc 22
2008-03-06 22:16:32.588: [ default][2546869600]a_init:7!: Backend init unsuccess
ful : [22]
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 512 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]propriogid:1: INVALID FORMAT
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]ibctx:1:ERROR: INVALID FORMAT
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]proprinit:problem reading the boo
tblock or superbloc 22
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 512 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]propriogid:1: INVALID FORMAT
2008-03-06 22:16:32.676: [ OCRRAW][2546869600]propriowv: Vote information on di
sk 0 [u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr] is adjusted from
[0/0] to [2/2]
2008-03-06 22:16:33.217: [ OCRRAW][2546869600]propriniconfig:No 92 configuratio
n
2008-03-06 22:16:33.217: [ OCRAPI][2546869600]a_init:6a: Backend init successfu
l
This is tail of my ocssd.log
[    CSSD]2008-03-06 22:17:55.955 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a1b10) proc(0x7a4e70) pid(13754) proto(10:2:1:1)
[    CSSD]2008-03-06 22:17:56.455 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a3740) proc(0x7a4e70) pid(13773) proto(10:2:1:1)
[    CSSD]2008-03-06 22:17:56.460 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a5b10) proc(0x7a7f50) pid(13772) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:08.380 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9770) proc(0x7a1f50) pid(13839) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:08.383 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9770) proc(0x7a1f50) pid(13839) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:11.556 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7aa3c0) proc(0x7ac7d0) pid(13845) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:17.873 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7ad070) proc(0x7af480) pid(13828) proto(10:2:1:1)
[    CSSD]2008-03-06 22:44:22.700 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9850) proc(0x7a1e50) pid(14060) proto(10:2:1:1)
[    CSSD]2008-03-06 22:44:22.703 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a22b0) proc(0x7a9850) pid(14060) proto(10:2:1:1)
[    CSSD]2008-03-06 22:44:25.875 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a32b0) proc(0x7a1800) pid(14077) proto(10:2:1:1)
And this is my css.log
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracl
e. All rights reserved.
2008-03-06 22:17:47.404: [ CSSCLNT][2549892096]clsssInitNative: connect failed,
rc 9
I checked on metalink and found that this error can occur due to some old oracle references or changes in the uid of users but this is fresh install no oracle was there before and we didnt' change the OS user's uid also.
Please let me know what else to check or SR is the only option?
Thanks
Daljit Singh

Do you mean CRS rather than CSS?
I note that your database is patched to 10.2.0.2 but your CRS is still at 10.2.0.1. Bring both to 10.2.0.3 and if that doesn't resolve the issue open an SR at metalink.
Do not install the January CPU ... it appears to have issues with RAC that we are currently investigating.

Databases are not coming up after server reboot(sun solaris).

Hi
OS - Sun OS 5.10 local zone. RDBMS version - 11.2.0.3
Databases are not coming up after server reboot.
We have verified the below points.
Cat/etc/init.d/oracle
$ORACLE_HOME/bin/oradism file permissions are 4550.
lock_sga is parameter set to false.
cat /var/opt/oracle/oratab entries are set to Y
Still Databases are not coming up after server reboot.
Please advise.

Hi,
Can you post further information from alert log. Doesn't coming up, means you needs to share the information some thing about your environmente settings about kernel parameter and init$ORACLE_SID parameters details.
That would be easy for others to look into it further to analyze things.
- Pavan Kumar N

Login page not coming up after applying patch 12374730

Hi ,
Login page is not coming up after applying patch 12374730.
OS : Solaris 10
Application release 12.1.3
Thanks,

Did you apply the patch successfully with no errors?
Yes
Do you have any invalid objects in the database?
NO
Did AutoConfig complete successfully?
Yes
Please check Apache log files for details about the error.
Thanks,
Hussein

Asha 501 : Whatsapp not working properly after 14....

Hi,
whatsapp is not working properly after software update, some times contacts never sync. screen goes pale and chat window doesn't show properly.
Looks like memory problem after the new updates or anything else?

Similar complains around the web. I'd recommend getting the phone flashed at a care point to see if that improves the situation.
Do wait for a couple of weeks for the full firmware files to be available at the respective care centers. AFAIK, they are not yet available in India.

Content Not Coming Properly after converting a Smartform to PDF.

Similar Messages

Maybe you are looking for