Content not visible until after refresh

I have two sites live now via muse, and once in a while some of the content isn't visible (mostly text) until after I refresh the page. Has anyone else had this issue?

If the widget requires you to add it to each Master, then yes. Also, as the issue lies with Chrome's latest release, please wait for Google to release an updated version of the browser. You may want to follow this thread - https://code.google.com/p/chromium/issues/detail?id=336476&q=font&colspec=ID%20Pri%20M%20I teration%20ReleaseBlock%20Cr%20Status%20Owner%20Summary%20OS%20Modified.
Thanks,
Vinayak

Similar Messages

TS140 Second HD (non-Lenovo) not seen until after boot

I have a TS140 (70A4001MUX), which came with a 500 GB HD. I installed Win7Pro x64, replaced the 4GB RAM with 16 GB of Crucial RAM, and added a second HD (4 TB Western Digital Enterprise WD4000F9YZ). Both HDs are configured GPT, I am booting via UEFI, and the latest firmware (99A) is installed.
This configuration mostly works, except that the second HD isn't visible until after booting. It does not appear in BIOS, which means I cannot boot from it. I have a boot partition on the second HD, cloned from my primary boot partition via Casper software. Normally, this provides me an alternative boot in case of drive failure or corruption on the first HD. But, on the TS140, attempting this alternative boot fails completely, as though the second drive were not there at all. Once I'm booted, though, I can read and write to the second HD all day long. Fwiw, all 16 GB of the new RAM does appear in BIOS.
The second HD:
Does NOT appear in BIOS.
Does appear after boot to Windows 7.
Does appear when booted from CD, such as WinPE and Paragon boot CD.
Why won't BIOS recognize the second drive, that is clearly present and functional? Thanks for any thoughts and suggestions.

Do you see the same behavior on a cold boot and a powered-up reboot?
Since I'm not familiar with ThinkServers, I'm just tossing stuff at the wall here, but I wonder if the new drive is slow to initialize and BIOS is not waiting long enough to detect it. Cold boot and reboot might behave differently in that case. Not sure how to fix that if it is the problem, but it might help to narrow things down.
[edit] There is a hard disk pre-delay option in BIOS. Not quite sure if it's intended for this situation (the one my WAG applies to) but might be worth a try.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Since I updated to firefox 3.6 I keep gettin multiple popup windows. This did not happen until after the update. The popups appear as regular windows so popup blockers can not stop them.

Since I updated to firefox 3.6 I keep gettin multiple pop up windows. This did not happen until after the update. The pop ups appear as regular windows so pop up blockers can not stop them. Why has the new update made my laptop more vulnerable. updates are supposed to be improvements!
== This happened ==
Every time Firefox opened
== as soon as I updated to ver 3.6

Im having the same problem, I updated my Iphone 4S to 6.1.3, shortly after that my phone had no audio. It was working fine one minute and then stopped. Was listening to music when sound gave out on me. It wont ring, phone just vibrates even after turning off vibration option. I've tried all the options listed and nothing. My phone has never been jailbroken either. If I connect the earphones is works perfectly. On one of my last calls received, phone's ringtone was heard for about 2 seconds before muting and just vibrating. Ringtone sounded perfect, speakers did not sound damaged.
What else could be done? I've read several post regarding this and it seems like Apple has no solution to this yet. Very dissappointed.

Portal content not visible after installation nw2004s

Hello
Portal Content folders not visible after logon to EP after installation
using the url http://172.22.218.120:50400/irj
logon is using Administrator id.
top level navigation is displayed. but no folder hierarchy in PCD.
Please help
regards
John

Hello John,
Used the host name instead of the ip address in the url http://<host name>:50400/irj/portal.
Maintain the host name in the host file of the OS.
ip address host name.
Regards
Deb
[Reward Points for helpful answers]

Mobil email content not visible

Since a July 5th security update to Firefox an email that I receive daily from a vendor, who uses his mobil phone to send a daily price quote, is not visible. The header to the email is visible but not the content. However, if I start a "reply" to the email - then I can see the content. I have cleared cache and history and done a reset of Firefox without success. The email is viewable on Explorer and Chrome but not Firefox. It is the only email of hundreds that cannot be seen after July 5th.

My speculation would be that something changed in the underlying HTML of the messages themselves, and/or how they are rendered by your email site, that causes Firefox to view the July 3+ messages differently.

Whenever I close Firefox, it remains visible until I refresh my desktop.

Whenever I close FF, the window does not disappear until I right-click on the desktop and select "Refresh." It is repeatable. Firefox is the only program doing it. If I have two FF windows open and I close one, it disappears appropriately.

Update:
A couple more things. If the FF window is straddling both of my screens it does not have any problems. It seems more likely to have problems when there are other program windows visible.

StageVideo not visible until orientation change

Hello,
I'm trying to show a video on iOS using AIR. I copied to code from some samples I found but I got very wierd results.
I wrote the code and ran it a few times, the first few times the video worked fine, then when I ran it again, for no aparent reason, I coudln't see the video anymore, but I could still hear it. After many checks I noticed that if I change the device's orientation I can see the video again, even if I return to the original orientation. It's like the video or stage doesn't refresh so the video is not visible and the orientation change somehow causes it to refresh and work again.
I found that if I change the stage alignment after setting the StageVideo's viewport it works fine again, but this seems like a strange patch..
Did anyone encounter this behvaiour and knows what causes it and how to fix it?
Thanks

I'm seeing the same thing. But it's happening with some video and not with other video.
See this thread for more details:
http://forums.adobe.com/message/5755370#5755370

Second Video not visible even after the first video is stopped

Hi,
I am trying to play a second video after the first video has completed(end of media). But the second video is not visible on the frame eventhough it plays in the background. I tried various things like stopping and closing the first video and removing all the components( visual and control). Still it does not work.
p.stop();
                    p.close();
                    p.deallocate();
                    remove(p.getVisualComponent());
                    remove(p.getControlPanelComponent());
                    removeAll();Is this a problem with JMF or am I doing something wrong? Please help me out.

Nidhi,
What version of LabView and WMP are you using?
This Knowledgebase points towards problems with LabView 7.1 and early and also WMP 9.0.
Are you hearing sound when you play the video? When you port the code over to the other application, are you including all necessary elements and preserving the link to the video?
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video

Email contents not visible using Yahoo mail, Windows 7 pro, FF3.6; email content fine in IE

New laptop with Windows 7 pro; loaded FF....worked fine for a couple weeks....then, contents in email no longer visible-----just blank box where text would normally appear. Only known changes were auto updates to adobe and auto updates to Windows. Zonealarm security in place since beginning, no changes since installation. When using IE, email is visible.
Just uninstalled Firefox and reinstalled. Same result....emails still not visible.
Appreciate any suggestions.....I hate using IE.

When you send mail the field you mention is used to populate the "ReplyTo: fild in the mail header. Otherwise it has no purpose and setting it to nothing will also work.
Yahoo are obviously checking that field as you send mail. that is points to a valid address, and I have a sneaking suspicion that is might be required to point to your yahoo mail account.
Historically the"Nigerian" type scam emails used a replyto address completely different from the one used to send the mail. So even if the sending account was closed down they still got the replies. The mail quite commonly originated in Yahoo and replied to Hotmail accounts. So I guess they have a check to try and discourage that legitimate, but undesirable from their perspective, use.

Web Page Content not Visible

Hi,
I'm having a problem, I think is isolated to Internet
Explorer 6.0. A few people using this version of the browser have
reported that the contents of my main page are not visible unless
you scroll down quite a ways. Any ideas what could be causing this?
MyAfricanDiaspora.com

On Wed, 19 Sep 2007 14:23:31 +0000 (UTC), "dreamnew"
<[email protected]> wrote:
>Hi,
>
> I'm having a problem, I think is isolated to Internet
Explorer 6.0. A few
>people using this version of the browser have reported
that the contents of my
>main page are not visible unless you scroll down quite a
ways. Any ideas what
>could be causing this?
>
http://www.myafricandiaspora.com
138 apparent validation errors - but that will reduce once
you start
fixing the problems.
http://validator.w3.org/check?uri=http%3A%2F%2Fwww.myafricandiaspora.com%2F&charset=%28det ect+automatically%29&doctype=Inline&ss=1&group=0&verbose=1#line-378
~Malcolm N....
~

Portal Content not visible

Hi All,
We are working on EP 7.0 SP9 using Internet Explorer 6.0 SP2 browser, but still the portal content directory in the portal is not visible. It shows javascript error in the status bar. The page gets loaded but with javascript errors.I am logging into portal with super admin role, but the same problem is coming. Even in Mozilla browser, the same error is displayed. I have even added the portal URL in trusted site.
Useful answer will be awarded suitably.
Regards,
Udit

Hi Leandro,
The javascript error that is coming is:
Line:165
Char:4
Error: Object required
Code:0
URL: http://<domain name>:<port no>/irj/portal/prtroot/com.sap.portal.appdesigner.framework.loading?loadingStr=Loading...&scroll=no&contentUrl=%2firj%2fservlet%2fprt%2fportal%2fprtroot%2fpcd!3aportal_content!2fadministrator!2fsuper_admin!2fsuper_admin_role!2fcom.sap.portal.content_administration!2fcom.sap.portal.content_admin_ws!2fcom.sap.portal.portal_content!2fcom.sap.portal.contentCatalogTreeContent
Plz guide me.

Content not visible while using DVBClassLoader

Hi, we have a problem with DVBClassLoader. We need to download several *.class files from WWW server in our application. The file is downloaded, but the problem is that the content is not visible for main Xlet class. Can someone help us please???
try {
               classPath[0] = new java.net.URL("file:" + sBuffer.toString());
               System.out.println("URL is " + classPath[0]);
               classPath[1] = new java.net.URL("http://XXX.YYY.146.233/");
          } catch (MalformedURLException e) {
          cl = DVBClassLoader.newInstance(classPath);
          try {
               cl.findClass("SecondClass");
               System.out.println("SecondClass read");
          } catch (ClassNotFoundException e) {
          secondClass = new SecondClass(context, scene, mainContainer, telo);
          secondClass.display(path1);

I haven't tried it, but it looks to me like you need to provide the parent ClassLoader in order to handle delegation to the DVBClassLoader.
intstead of this: DVBClassLoader.newInstance(classPath);
use: DVBClassLoader.newInstance(classPath, getClass().getClassLoader());

ESS Content not visible in Content Administration

I've installed SAP Netweaver 2004s Java + Portal 7.00 SP7.
I also deployed ESS, MSS and PCUI_GP. The content of ESS is not visible when I look in de content administration. I'd expected it under "Portal Content --> Content provided by SAP --> End user content".
Noting strange hapened during deployment. I'm using user Administrator (UME = Java database).
Any sugestions?

Hi wilbert
Import the Portal content Buisness Package for ESS/MSS
if u r working with ERP2004 download it from following link.
ESS:-
https://smpdl.sap-ag.de/~swdc/002007974700000167412004D/BPERP4ESS0_0-10003146.zip?_ACTION=DL_DIRECT
MSS:-
https://smpdl.sap-ag.de/~swdc/002007974700000246072005D/BP_ERP4MSS0_2-10002991.zip?_ACTION=DL_DIRECT
unzip the zip file import it into portal.
regards,
kaushal

Change to display field on control block not reflected until form refreshed

Hi guys, hope someone out there can help me with this query.
I'm currently developing a form that will allow users to generate offer letters and contracts via a custom form which is used within Apps 11i. This form is a fairly standard multi-text field form with tickboxes which hold the applicant details, two buttons (one to Select All, the other to Clear All) and another button to produce the actual contracts selected.
There is also a display field which is part of the control block attached to the form; both it and the Produce Contracts button are part of this control block. I've added a bit of code to change the text in the display field to inform the user that the contract or contracts they've requested are being generated, but although the call to the relevant code to do this appears before kicking off the concurrent request to generate the contracts, the update to the field fails to appear until after the concurrent request is complete and its output appears on another screen.
Does anyone know why this is? I've racked my brains over it and can't seem to understand why. I've pasted the code in below if anyone has any ideas!
Many thanks, Geoff
--- procedure display_status_message ---
--- Displays a status message in the request_extract_ctrl.query_information ---
--- display item informing user what is going on ---
--- Changes: ---
--- G Butler 21/08/08 First version ---
procedure display_status_message(p_tab_count in binary_integer default 0) as
c_proc_name constant varchar2(50) := 'display_status_message';
v_position pls_integer;
v_msg_string varchar2(500);
v_status_msg varchar2(2000);
begin
     v_position := 1;
     --- go to the request_extract_ctrl block
     go_block('REQUEST_EXTRACT_CTRL');
     --- check how many records have been sent for generation
     --- get the correct message from the message dictionary
     if p_tab_count = 1 then
     fnd_message.set_name('XXJSDATA','SSL_CA_LETTER_CONTRACT_SUBMIT');
     elsif p_tab_count > 1 then
          fnd_message.set_name('XXJSDATA','SSL_CA_LETTER_CONTRACTS_SUBMIT');
     end if;
     v_position := 2;
     --- copy the message into the display item field
     v_status_msg := fnd_message.get;
     :request_extract_ctrl.query_information := v_status_msg;
     -- synchronize the change in the display item field with the form on screen
     synchronize;
     v_position := 99;
exception
     when others then
v_msg_string :='Unexpected error occurred in display_status_message procedure, position: '||v_position;
v_msg_string := v_msg_string||'. SQL error: '||sqlerrm;
fnd_message.set_string(v_msg_string);
     fnd_message.error;
     raise form_trigger_failure;
end display_status_message;

I had a similar problem, but it was with the message line. I found that with Web Forms, I had to issue the Synchronize; a second time, but in Client/Server Forms 6i, the first synchronize worked. Here is the code I used:
<pre><font face = "Lucida Console, Courier New, Courier, Fixed" size = "1" color = "navy"> SYNCHRONIZE;
if Get_Application_Property(User_Interface) = 'WEB' then
synchronize;--first does not work on web
end if;</font></pre>
Let us know if this works.

VNC - remote computer now not discoverable until after log in

I've been using Chicken of the VNC on a G4 laptop (OSX 10.4.7) to control a headless Intel Mac Mini. It's worked great so far. Through VNC I could log in to the Mini and get going.
But I just updated the Mini to Intel 10.4.7 and iTunes 7 and now the Mini is not discoverable by Chicken until after I log in to the Mini. I had to connect a monitor and keyboard to do this, which entirely goes against the point of the headless Mini.
I have Remote Desktop turned on on the Mini and I'm also now running OSXVNC. Either through OSXVNC or Apple's remote desktop server the Mini cannot be found by Chicken until I log in to the Mini.
Is there another setting in the OS that will allow a remote computer to log in using VNC? What would have changed here?
Thanks!

Hi,
I was facing the same issue and contacted Apple support.
They told me to perform the following 2 actions.
OS X Mavericks: Reset your computer's PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
After resetting the PRAM, I did not notice any change, but resetting the SMC solved the problems.
Please also try.
Daniel

Content not visible until after refresh

Similar Messages

Maybe you are looking for