Content of final cut studio 1

hi,
i got the FCS 1 the earlier version and i need to install it again.and im not sure about the content cds.can anyone tell me how many cds comes with the earlier version and names of cds. thanks

The Final Cut Studio 1 package includes the following disks:
Final Cut Studio Installation
Soundtrack Pro Installation
Apple Loops for Soundtrack Pro
Motion Installation
DVD Studio Pro Installation
LiveType Media
Final Cut Studio Tutorials
Apple Pro Training Final Cut Studio DVD Tutorial
The LiveType Media comes on two disks.
(28874)

Similar Messages

  • Where Can I find content for Final Cut Studio!

    Hello,
    I had final cut studio on my program but I didn't know that it came with content. I threw the box away. Is there a way where I can get those content for the programs?
    Thanks

    "But the truth is i got it" yes you did....off a bit torrent. The DVDs are packaged together, it's quite obvious that you illegally obtained a stripped copy. No one is going to fall for your scam, you have some nerve to come here and try and pull it off. Your elementary school english isn't convincing either. I hate to be a bit rude but you have to grow up. If you did actually have a copy you could just show apple your serial number sheet and they'd replace the missing software, but that isn't the case here is it? You have embarrassed yourself and you name here.
    Mods please lock this!!!

  • New category "Content creation with Final Cut Studio"

    Hi:
    I have found a new "Content creation with Final Cut Studio" category in FCS forum. I don't find clear the kind of questions/issues/discussions to post there !
    http://discussions.apple.com/forum.jspa?forumID=1137
    I think probably someone can clarufy the here !
    Thanks in advance.
      Alberto

    You're Welcome Silal!
    I hope that you receive an adequate explanation there!
    And Thank You, for extending the courtesy, of awarding in Discussions.
    ali b

  • Normal to have "Final Cut Studio - Audio Content 1" disc in package?

    Hello All,
    I am trying to install a newly purchased Logic Studio 9 and the installation is not going well; it is asking me for an "Additional Content" disc...but I don't have such a disk in the box...I do have a Final Cut Studio Audio Content 1 disk though...is this some kind of mistake and it shipped with the wrong disks?

    scotopia wrote:
    Hello All,
    I am trying to install a newly purchased Logic Studio 9 and the installation is not going well; it is asking me for an "Additional Content" disc...but I don't have such a disk in the box...I do have a Final Cut Studio Audio Content 1 disk though...is this some kind of mistake and it shipped with the wrong disks?
    Additional Content and FCS Audio Content are not the same
    If the copy of Logic Studio you bought shipped with a wrong disc you need to return it for a replacement.
    A

  • Additional Content - Final Cut Studio

    I'm going to be getting a new MacBook Pro as soon as they refresh, and I already own Final Cut Studio 2, but I'd like to get an SSD with the MBP, and I was just wondering about the additional content for FCS. I'm debating between a 128gb and 256gb, and the ~50gb of content that comes with FCS will be the deciding factor for me. Can I install this content on a drive separate from the application?
    I will only be editing when I have my external drive attached anyway, so I'd much rather throw it on a 2TB drive than on the internal SSD, especially when that means I can save a few hundred dollars on going with the lower SSD size. Is it possible to do this?
    Thanks.

    SSD are fabulous because of no moving parts and incredibly fast access times, and read/write capabilities.
    I have one.
    But I don't see any significant improvements in FCP for editing. A 7200 rpm fast Seagate Momentous is an excellent boot drive. Much cheaper, but not as fast booting, or loading apps.
    But that doesn't matter when editing.

  • How to remove Final Cut Studio content, extras, etc?

    Hi,
    I want to say that I do not want to delete the apps. What I want to do is only remove the extra content.
    Essentially, I installed the entire Final Cut Studio on my MacBook Pro and am realizing I should not have done the complete install (eats up hard drive like no tomorrow).
    So.. any / all advice would be greatly appreciated!!
    Thanks!

    In Motion, open the Motion preferences found in the Motion menu... on the front page you see the path names to templates and livefonts... If you remove them, you could place them on another drive like a FW drive... and access them that way.
    In Livetype, The media files are located in Macintosh HD/Library/Application Support/LifeType/Templates. You could move them, then add their new location to the window that opens when you select LiveType's Preferences. Then LT will look for templates in this new location.
    In DVD SP, the location of styles and templates is near the same path as in LiveType, however in the DVD SP folder. To reset them to a new location, the preferences for DVD SP you can change the location of where DVD SP looks for these...
    I'd not want to lose them altogether, but you won't hurt anything doing so... I'd put them on an external drive and reset where the various apps look for them, and if all is well, delete the originals...
    Jerry

  • Reinstall Final Cut Studio without reinstalling content, templates, etc.?

    I had to reinstall my entire OS because of a major system failure. I am now in the process of reinstalling all my applications and my question is this:
    All of the content, templates, sound loops, etc. that are installed with Final Cut Studio (40+ GBs of data) I had installed onto an external hard drive. Thus the content is all still there.
    I am about to reinstall FCS onto my system and was wondering if there was a way I could point the installer or respective applications to the content on my external hard drive. This would prevent having to reinstall all 40+ GBs of content onto the external drive again and would save probably about three hours.
    Does anyone know if this is possible and how? Thanks.

    Good luck getting an answer on reinstalling, but I may be able to help. When you put the first Final Cut Studio install disc in, it asks you what you want to install, and gives you the option of unchecking a bunch of stuff like a bunch of livetype media and such. I haven't tried this, but I would imagine that you could just uncheck what you have installed elsewhere and when you open the application for the first time, it will probably ask you to reconnect the media files. At least that's how it sounds like apple would do it.
    -Brian

  • Audio Content 1,2,3 Logic/Final Cut Studio

    Hello.
    Do I have to install both Audio Contents 1,2,3 from Logic Studio and Final Cut Studio ???
    or the content from these three DVDs is perfectly the same???
    LOW DISK SPACE HERE...
    Thanks

    It's easy... just boot from your OS CD, and choose erase and install from the optional installs button once booted. Run Software update a few times until there is no more to update... This will erase the hard drive and install a new OS on it.
    Install whatever.
    To boot from this drive, hold down the option key during a startup , and you can pick it from the dialog box that opens. To reboot just select the other drive in the startup disk pref in Apple System prefs.
    Jerry

  • What is the "Content Creation with Final Cut Studio" ?

    Hi,
    How does this category differ from Final Cut Studio?
    Thanks for your time.

    Hi:
    Check this thread:
    http://discussions.apple.com/thread.jspa?messageID=4606811
    Hope that helps !
      Alberto

  • Final Cut Studio 2: Requirements and Recommendations

    Hello Final Cut Studio 2 Experts,
    I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
    N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
    THANKS IN ADVANCE for your expert advise!
    So, here we go:
    Application-Specific Requirements
    Final Cut Studio
    Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
    1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
    Motion
    The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
    ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
    ATI Mobility Radeon 9700 or 9600
    NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
    For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
    2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
    Color
    The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
    ATI Mobility Radeon X1600
    ATI Radeon X1600
    NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
    A display with 1680-by-1050 resolution or higher
    A three-button mouse for full functionality
    3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
    DVD Studio Pro
    For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
    For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
    For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
    For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
    For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
    4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
    What is a "replicator"?
    Application-Specific Recommendations
    Motion
    One of the following graphics cards is highly recommended:
    ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
    NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
    For 32-bit rendering: a graphics card with 256MB of VRAM or more
    Color
    The following graphics card is highly recommended:
    ATI Radeon X1900 XT
    Dual displays with 1920-by-1200 or higher resolution
    5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
    My Power Mac G5 HARDWARE CONTENTS:
    Hardware Overview:
    Machine Name: Power Mac G5
    Machine Model: PowerMac7,3
    CPU Type: PowerPC G5 (3.0)
    Number Of CPUs: 2
    CPU Speed: 2.3 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 4.5 GB
    Bus Speed: 1.15 GHz
    Boot ROM Version: 5.2.4f1
    Serial Number: G85167AGRU3
    ATA Bus:
    SONY DVD RW DW-Q28A:
    Model: SONY DVD RW DW-Q28A
    Revision: KAS7
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    SONY DVD RW DW-Q28A:
    Model: SONY DVD RW DW-Q28A
    Revision: KAS7
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    Built In Sound Card:
    Devices:
    Texas Instruments TAS3004:
    Inputs and Outputs:
    Line Level Input:
    Controls: Left, Right
    Playthrough: No
    PluginID: TAS
    Headphones:
    Controls: Mute, Left, Right
    PluginID: TAS
    Internal Speakers:
    Controls: Mute, Master
    PluginID: TAS
    Line Level Output:
    Controls: Mute, Left, Right
    PluginID: TAS
    Crystal Semiconductor CS84xx:
    Inputs and Outputs:
    S/PDIF Digital Input:
    Controls: Mute
    Playthrough: No
    PluginID: Topaz
    S/PDIF Digital Output:
    Controls: Mute
    PluginID: Topaz
    Formats:
    PCM 16:
    Bit Depth: 16
    Bit Width: 16
    Channels: 2
    Mixable: Yes
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    PCM 24:
    Bit Depth: 24
    Bit Width: 32
    Channels: 2
    Mixable: Yes
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    AC3 16:
    Bit Depth: 16
    Bit Width: 16
    Channels: 2
    Mixable: No
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    Bluetooth: No Information Found.
    SONY DVD RW DW-Q28A:
    Firmware Revision: KAS7
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    Fibre Channel: No Information Found.
    FireWire Bus:
    Maximum Speed: Up to 800 Mb/sec
    ATI Radeon 9600:
    Chipset Model: ATY,RV351
    Type: Display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 128 MB
    Vendor: ATI (0x1002)
    Device ID: 0x4150
    Revision ID: 0x0000
    ROM Revision: 113-A58504-113
    Displays:
    Cinema HD Display:
    Display Type: LCD
    Resolution: 1920 x 1200
    Depth: 32-bit Color
    Core Image: Supported
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Rotation: Supported
    Display:
    Status: No display connected
    DIMM0/J11:
    Size: 256 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM1/J12:
    Size: 256 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM2/J13:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM3/J14:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM4/J41:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM5/J42:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM6/J43:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    DIMM7/J44:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    PC Cards: No Information Found.
    PCI Cards: No Information Found.
    Parallel SCSI: No Information Found.
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 0
    Display Sleep Timer (Minutes): 0
    Dynamic Power Step: No
    Reduce Processor Speed: No
    Sleep On Power Button: Yes
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On LAN: No
    Wake On Modem Ring: No
    Adobe PDF 7.0:
    Status: Idle
    Print Server: Local
    Driver Version: 10.4
    Default: No
    URI: pdf700://distiller/
    PPD: Adobe PDF 3016.102
    PPD File Version: 1.0
    PostScript Version: (3016.102) 0
    hp LaserJet 1012:
    Status: Idle
    Print Server: Local
    Driver Version: 1.4.5
    Default: Yes
    URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
    PPD: hp LaserJet 1012
    PPD File Version: 1.0
    PostScript Version: (3011.104) 0
    Serial-ATA Bus:
    Maxtor 6B250S0:
    Capacity: 233.76 GB
    Model: Maxtor 6B250S0
    Revision: BANC1E50
    Serial Number: B61QB0RH
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "A (upper)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 233.64 GB
    Available: 50.02 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /
    Maxtor 6B250S0:
    Capacity: 233.76 GB
    Model: Maxtor 6B250S0
    Revision: BANC1E50
    Serial Number: B61QB0RH
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "A (upper)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 233.64 GB
    Available: 50.02 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /
    Serial-ATA Bus:
    Maxtor 7L300S0:
    Capacity: 279.48 GB
    Model: Maxtor 7L300S0
    Revision: BANC1E00
    Serial Number: L602X73H
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "B (lower)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Primo Volume:
    Capacity: 279.36 GB
    Available: 154.23 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk0s3
    Mount Point: /Volumes/Primo Volume
    Maxtor 7L300S0:
    Capacity: 279.48 GB
    Model: Maxtor 7L300S0
    Revision: BANC1E00
    Serial Number: L602X73H
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "B (lower)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Primo Volume:
    Capacity: 279.36 GB
    Available: 154.23 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk0s3
    Mount Point: /Volumes/Primo Volume
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0035
    PCI Revision ID: 0x0043
    PCI Vendor ID: 0x1033
    Bus Number: 0x2b
    Hub in Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x1003
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Hub in Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x1003
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0035
    PCI Revision ID: 0x0043
    PCI Vendor ID: 0x1033
    Bus Number: 0x0b
    hp LaserJet 1012:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Hewlett-Packard
    Product ID: 0x0d17
    Serial Number: 00CNFB638356
    Vendor ID: 0x03f0
    hp LaserJet 1012:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Hewlett-Packard
    Product ID: 0x0d17
    Serial Number: 00CNFB638356
    Vendor ID: 0x03f0
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0040
    PCI Revision ID: 0x0001
    PCI Vendor ID: 0x106b
    Bus Number: 0x09
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0040
    PCI Revision ID: 0x0001
    PCI Vendor ID: 0x106b
    Bus Number: 0x08
    USB High-Speed Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBEHCI
    PCI Device ID: 0x00e0
    PCI Revision ID: 0x0004
    PCI Vendor ID: 0x1033
    Bus Number: 0x4b

    SORRY, BUT MY PREVIOUS POSTING DIDN'T HAVE THE FULL LIST OF HARDWARE CONTENTS of my Power Mac G5.
    Hello Final Cut Studio 2 Experts,
    I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
    N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
    THANKS IN ADVANCE for your expert advise!
    So, here we go:
    Application-Specific Requirements
    Final Cut Studio
    Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
    1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
    Motion
    The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
    ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
    ATI Mobility Radeon 9700 or 9600
    NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
    For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
    2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
    Color
    The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
    ATI Mobility Radeon X1600
    ATI Radeon X1600
    NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
    A display with 1680-by-1050 resolution or higher
    A three-button mouse for full functionality
    3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
    DVD Studio Pro
    For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
    For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
    For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
    For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
    For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
    4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
    What is a "replicator"?
    Application-Specific Recommendations
    Motion
    One of the following graphics cards is highly recommended:
    ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
    NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
    For 32-bit rendering: a graphics card with 256MB of VRAM or more
    Color
    The following graphics card is highly recommended:
    ATI Radeon X1900 XT
    Dual displays with 1920-by-1200 or higher resolution
    5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
    My Power Mac G5 HARDWARE CONTENTS:
    Hardware Overview:
    Machine Name: Power Mac G5
    Machine Model: PowerMac7,3
    CPU Type: PowerPC G5 (3.0)
    Number Of CPUs: 2
    CPU Speed: 2.3 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 4.5 GB
    Bus Speed: 1.15 GHz
    Boot ROM Version: 5.2.4f1
    Serial Number: G85167AGRU3
    ATA Bus:
    SONY DVD RW DW-Q28A:
    Model: SONY DVD RW DW-Q28A
    Revision: KAS7
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    SONY DVD RW DW-Q28A:
    Model: SONY DVD RW DW-Q28A
    Revision: KAS7
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    Built In Sound Card:
    Devices:
    Texas Instruments TAS3004:
    Inputs and Outputs:
    Line Level Input:
    Controls: Left, Right
    Playthrough: No
    PluginID: TAS
    Headphones:
    Controls: Mute, Left, Right
    PluginID: TAS
    Internal Speakers:
    Controls: Mute, Master
    PluginID: TAS
    Line Level Output:
    Controls: Mute, Left, Right
    PluginID: TAS
    Crystal Semiconductor CS84xx:
    Inputs and Outputs:
    S/PDIF Digital Input:
    Controls: Mute
    Playthrough: No
    PluginID: Topaz
    S/PDIF Digital Output:
    Controls: Mute
    PluginID: Topaz
    Formats:
    PCM 16:
    Bit Depth: 16
    Bit Width: 16
    Channels: 2
    Mixable: Yes
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    PCM 24:
    Bit Depth: 24
    Bit Width: 32
    Channels: 2
    Mixable: Yes
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    AC3 16:
    Bit Depth: 16
    Bit Width: 16
    Channels: 2
    Mixable: No
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    Bluetooth: No Information Found.
    SONY DVD RW DW-Q28A:
    Firmware Revision: KAS7
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    Fibre Channel: No Information Found.
    FireWire Bus:
    Maximum Speed: Up to 800 Mb/sec
    ATI Radeon 9600:
    Chipset Model: ATY,RV351
    Type: Display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 128 MB
    Vendor: ATI (0x1002)
    Device ID: 0x4150
    Revision ID: 0x0000
    ROM Revision: 113-A58504-113
    Displays:
    Cinema HD Display:
    Display Type: LCD
    Resolution: 1920 x 1200
    Depth: 32-bit Color
    Core Image: Supported
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Rotation: Supported
    Display:
    Status: No display connected
    DIMM0/J11:
    Size: 256 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM1/J12:
    Size: 256 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM2/J13:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM3/J14:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM4/J41:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM5/J42:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM6/J43:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    DIMM7/J44:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    PC Cards: No Information Found.
    PCI Cards: No Information Found.
    Parallel SCSI: No Information Found.
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 0
    Display Sleep Timer (Minutes): 0
    Dynamic Power Step: No
    Reduce Processor Speed: No
    Sleep On Power Button: Yes
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On LAN: No
    Wake On Modem Ring: No
    Adobe PDF 7.0:
    Status: Idle
    Print Server: Local
    Driver Version: 10.4
    Default: No
    URI: pdf700://distiller/
    PPD: Adobe PDF 3016.102
    PPD File Version: 1.0
    PostScript Version: (3016.102) 0
    hp LaserJet 1012:
    Status: Idle
    Print Server: Local
    Driver Version: 1.4.5
    Default: Yes
    URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
    PPD: hp LaserJet 1012
    PPD File Version: 1.0
    PostScript Version: (3011.104) 0
    Serial-ATA Bus:
    Maxtor 6B250S0:
    Capacity: 233.76 GB
    Model: Maxtor 6B250S0
    Revision: BANC1E50
    Serial Number: B61QB0RH
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "A (upper)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 233.64 GB
    Available: 50.02 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /
    Maxtor 6B250S0:
    Capacity: 233.76 GB
    Model: Maxtor 6B250S0
    Revision: BANC1E50
    Serial Number: B61QB0RH
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "A (upper)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 233.64 GB
    Available: 50.02 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /
    Serial-ATA Bus:
    Maxtor 7L300S0:
    Capacity: 279.48 GB
    Model: Maxtor 7L300S0
    Revision: BANC1E00
    Serial Number: L602X73H
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "B (lower)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Primo Volume:
    Capacity: 279.36 GB
    Available: 154.23 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk0s3
    Mount Point: /Volumes/Primo Volume
    Maxtor 7L300S0:
    Capacity: 279.48 GB
    Model: Maxtor 7L300S0
    Revision: BANC1E00
    Serial Number: L602X73H
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "B (lower)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Primo Volume:
    Capacity: 279.36 GB
    Available: 154.23 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk0s3
    Mount Point: /Volumes/Primo Volume
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0035
    PCI Revision ID: 0x0043
    PCI Vendor ID: 0x1033
    Bus Number: 0x2b
    Hub in Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x1003
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Hub in Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x1003
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0035
    PCI Revision ID: 0x0043
    PCI Vendor ID: 0x1033
    Bus Number: 0x0b
    hp LaserJet 1012:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Hewlett-Packard
    Product ID: 0x0d17
    Serial Number: 00CNFB638356
    Vendor ID: 0x03f0
    hp LaserJet 1012:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Hewlett-Packard
    Product ID: 0x0d17
    Serial Number: 00CNFB638356
    Vendor ID: 0x03f0
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0040
    PCI Revision ID: 0x0001
    PCI Vendor ID: 0x106b
    Bus Number: 0x09
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0040
    PCI Revision ID: 0x0001
    PCI Vendor ID: 0x106b
    Bus Number: 0x08
    USB High-Speed Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBEHCI
    PCI Device ID: 0x00e0
    PCI Revision ID: 0x0004
    PCI Vendor ID: 0x1033
    Bus Number: 0x4b
    Message was edited by: Rinaldo

  • Final Cut Studio is crashing a lot using a Mac Pro (nehalem) 2009

    Greetings,
    I have a video workstation based on a Mac Pro (2x2.26GHz Quad-Core Intel Xeon Nehalem, 6 GB RAM, 640 GB HD, 512 NVIDEA VRAM) with a Blackmagic Decklink HD Extreme 2009 and an Highpoint RocketRAID 4322 card (properly connected to a RAID 5 array).
    I'm editing, with Final Cut Studio 3, a big TV project with some TGA and loads of HD XDCAM EX 35mbs video footage.
    *What is happening wrong?*
    Final Cut Pro is crashing to many times and dont let me work with the flow that is supposed. I start to work and i do a bit of scrubbing in the timeline and suddenly the rainbow spyral starts to spin and kaput! FCP just crashes.
    I've tried to many things. Re-installing everything from the baseline, plug out the 2 PCIe cards (and not even the drivers are installed). Even so FCP still crashes with the project.
    Funny thing is... This symptom only happens with the Nehalem Mac Pro. I have another station based on a Mac Pro 2x2.66 GHz Dual Core Xeon 3 GB RAM 2006 and when i run the project... everything works fine. FCP here doesn't crash.
    This is what makes me believe that the problem must be with the new Mac Pro.
    I have the reports generated by the FCP after the crash. You can find it here:
    http://www.ideiascompernas.com/reports/
    I'm getting frustrated because i've invested big in this workstation, safe in the knowledge that it was going to be stable to complete my requirements.
    Is there anything that i or Apple can do to resolve my problem. Is it the processor? Extended Hardware Test says that everything is ok.
    I'll be waiting,
    best regards, thanks,
    Pedro

    You may want to also post here:
    Final Cut Studio forum:
    http://discussions.apple.com/category.jspa?categoryID=123
    Content creation with Final Cut Studio
    http://discussions.apple.com/forum.jspa?forumID=1137
    I see you have the GT120, not a very nice card really but maybe it is 'enough.' I'd upgrade. To ATI Radeon 4870, once you get it stable and working.
    http://discussions.apple.com/thread.jspa?messageID=10251193&tstart=0
    I see your crash is kernel panic actually.
    Exception Type: EXCBADACCESS (SIGBUS)
    Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000
    Crashed Thread: 194
    Almost always that is memory related, are you seeing parity errors?
    Watch System Profile - Memory tab
    Replace the RAM (I'd even up it to more memory, 6 x 2GB is what I would have configured for)
    Have you tested your RAM? run Apple Hardware Test?
    Disabled ALL USB and Firewire devices?
    Is the RR4322 okay to run in slot #2 (16x) rather than in slot 3 or 4 (4x)?
    Getting RAM replaced, advanced exchange, or go out and getting some Kingston or Crucial etc for your system, and swapping, really is one good method, trial and error, to find the cultprit or rule out RAM.
    Errors like this can mean flushing your caches is a must, and possibly due to errors and crashes, clean system install, checking data (both time consuming) and being careful to recheck your drives with Disk Warrior and/or TechTool Pro 5 to insure there are not any corrupt files (not perfect either which is why restore the system from known good backup image can be a must).

  • Imac won't let me install Final cut studio 2..it will let me install the upgrade, but it has no live type and i need it to work on my current projects. How do I get Live type back installed in iMac

    I just purchased an iMac for home and went to install final cut studio 2 and it gave me an error saying something about "PowerPC" not used or something like that. Installed the studio upgrade just fine...but it has no "Live Type" which I need to work on projects I have been using in my Mac Pro at my work place. How do I get "Live Type" to install in this iMac? Downloaded Live Type upgrade but that won't update cause there's no "Live Type" in the applications.

    It sounds like you have Lion installed on your new imac, although your profile says SL 10.6.8 (you may want to change this.)
    If you have the Snow Leopard install disc I believe you can install "Rosetta" from the extras folder which will then, if you have the original FCS2 discs , allow you to select and install Live Type and LIve Type content only from the custom install options.
    I hope this will work for you.
    DM

  • Unable to install Final Cut Studio 2.0

    I had the previous version of FInal Cut Studio and just purchased Final Cut Studio 2. I chose to uninstall Final Cut Studio first by dragging all the studio programs to the Trash figuring I didn't want to chance having two versions of Final Cut Studio on my computer.
    I then went in to install Final Cut Studio 2. It allowed me to install the items such as Motion Content, LiveType, Audio Content, Studio Pro, etc. The option for selecting Final Cut Pro was greyed out and said skip. I don't know why but it's like it already thought it was on there and would just upgrade it. I tried it several times but always had this same set of options.
    I went on then and did an install of Final Cut Studio hoping that when it came to installing it would actually work right. Well it installed all the supporting programs but not Final Cut Pro. How can I properly install the whole suite?

    The FinalCut Suite 5 I'm running is misbehaving so before I install the new FinalCut Pro 6 Suite, I'd like to uninstall all of FCP Suite components and _all of their settings and customizations_. How do I make sure the new install is _absolutely clean and nothing from the previous installation effects it?_
    Thanks,
    Uri

  • Can I use Final Cut Studio 2 software on a MacBook Air?

    My old MacBook Pro was stolen a couple of years ago and I replaced it with a MacBook Air OSX 10.9.5. I still have the software from Final Cut Studio 2  which I used on my MacBook Pro. I haven't got around the replacing this and was looking at the Final Cut App when it dawned on me I might be able to use the software I have. Any thoughts? I know nothing about how computers work, so a simple 'No', 'Yes' or 'Do this to make it work', would be great!

    I think the gist of what the two former responders are saying is that, if you can upgrade to software that will run natively in Yosemite, then you are seemingly much better off!
    I am not a film editor (although I play one on my computer! hahahaha) but I have been told by many FCS2 users that they need ongoing access to it because of clients who ask for editorial updates to older projects.  My understanding is that Final Cut Pro X will NOT open the FCS2 files for processing.  Hence a valid reason to be able to install and operate FCS2 on today's modern Macs.
    There are three methods to install and operate FCS2 in Mavericks; I have no confirmation yet that these work in Yosemite, or if once installed in Yosemite, FCS2 will operate properly.  Here is a recent post I prepared to provide this information:
    Apple has created a "bug" in the attempt to install FCP6 in Lion, Mt. Lion and Mavericks, which makes it look like Rosetta is needed for a PowerPC app, the installer, so as to make it difficult for the use of FCP6 in these versions of OS X!  There are three ways to install it:
    1.  Pacifist https://www.charlessoft.com/
    2.  Jeremy Johnstone's Terminal method http://www.jeremyjohnstone.com/blog/2012-03-11-installing-final-cut-pro-studio-2 -0-on-mac-os-x-10-7-lion.html
    3.  HawaiianHippie has discovered the best and safest possible solution to this problem:
    https://discussions.apple.com/message/26309669?ac_cid=tw123456#26309669
    I have now successfully done this on four computers, brand new iMacs running 10.9.4.  And I've discovered an even easier way to do this!  You don't need to edit the plist file, just move it into the Trash.  Install proceeds normally.  You can return it after you're done if you like, I don't know what (if any) possible repercussions might come from leaving it deleted.
    The file, as indicated on Jeremy Johnstone's blog, is
    /System/Library/CoreServices/Installer.app/Contents/Resources/PPCRequirements.pl ist
    (Note that when you get to Installer.app, you will have to Control+click and select "Show Package Contents")
    I have not, as yet, attempted to recreate his success.

  • Final cut studio 2

    I am installing final cut studio 2 on my computer and its been awhile since I bought it so I am not sure which disc its asking for. I have so many final cut disc here mixed up here, I put in the install disc and then it ask for Audio Content one could someone tell me what disc that is I have motion and apple loops and dvd studio 4 but can't seem to find the Audio Content disc and what version it is? Thanks

    well I imagine the audio content disk is labelled ... wait for it... "audio content." You can choose NOT to install additional content (like audio content) if you can't find the disk, so that you can successfully install the applications.

Maybe you are looking for