Content of Scrolling text won't start at the top of the frame

Despite making the frame exactly the same size as the content the Scrolling text won't start at the top of the frame. It drops down the equivalent of a line of text. Any ideas?

Hi Ali
No to Baseline Grid
Yes to Text Wrap but its a small graphic (to indicate scrolling text) inset into text halfway down.
The first line of text has a 4 line drop cap with Align to Left Edge checked. The DC is also defined as a Chara Style and doesn't exend above the top of the text.

Similar Messages

My macbook pro won't start up. I get the white screen and the grey apple icon   the spinning wheel......and it doesn't change !

My macbook pro won't start up. I get the white screen and the grey apple icon   the spinning wheel......and it doesn't change !

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Firefox won't start. Everytime I end the process/close the last window, it keeps getting stuck at about 2500k memory in the task manager. (continued)

Firefox won't start. Everytime I end the process/close the last window, it keeps getting stuck at about 2500k memory in the task manager. The only way I have to fix it is to change some kind of compability settings or try and access it in a new way, and every time it crashes/closed/computer blue screens that setting will no longer work.
That is a short term solution, but eventually I'll run out of ways to access firefox successfully. I've tried many solutions, and some worked, but only once. I have yet to find a permanent solution for this problem.

First please update your plugins to make sure you are up to date. Shockwave Flash player has a newer version 16. In order to better manage the memory that Firefox uses please see these troubleshooting steps: [https://support.mozilla.org/en-US/kb/firefox-uses-too-much-memory-ram Firefox Uses too much RAM]
You also mentioned that Firefox crashes, we're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste those IDs into the "Post a Reply" box.
''' Note:''' If a recent Report ID does not start with '''bp-''' click on it and select '''Submit'''.
(Please don't take a screenshot of your crashes, just copy and paste the IDs. The below image is just an example of what your Firefox screen should look like.)
;[[Image:aboutcrashesFx29|width=500]]
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article.

My macbook pro won't start up. Instead of the apple logo appearing in the start up only a grey folder with a ? At the center appears

My macbook pro won't start up. Instead of the apple logo appearing in the start up only a grey folder with a ? At the center appears

Boubert,
the question mark in the folder typically represents the inability to recognize a valid filesystem on the volume being booted from. You can try this, although it might not make a difference: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, select the First Aid tab if it’s not already selected, then press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it able to boot normally now?

My macbook won't start up i have used the option command p r while holding down power button but not done.. please help guys

my macbook won't start up i have used the option command p r while holding down power button but not done.. please help guys

It not polite to repost asking fro more help three minutes after initial post.
Recovery mode is Command & R keys after depressing and releasing the Power button for a normal startup.
OS X: About OS X Recovery - Apple Support
That only works for Lion and later.
What exactly happens when your try to boot to Recovery?
Try starting in Safe Mode resetting the SMC and NVRAM/PRAM
OS X: What is Safe Boot, Safe Mode?
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
What model MacBook Pro and what OSX version was on the Mac?
Have you tried booting from an OSX install DVD?
When you try to start doe the Power light light?
This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

My probably 10 year old MaycBook died. It won't start. When I press the power button, it gets power, but it only lights up and a scratching noise starts like something is spinning. A file folder with a question mark periodically flashes... Help!!!

My probably 10 year old MaycBook died. It won't start. When I press the power button, it gets power, but it only lights up and a scratching noise starts like something is spinning. A file folder with a question mark periodically flashes... Help!!!

You don't have a Macbook if you are running OS 9 and it's 10 years old. The first Macbook is an Intel Mac that came out in 2006 running 10.4.x. You most likely have a Powerbook. Try posting in the Powerbook forum.
A flashing question mark appears when you start your Mac

How do I get my content all the way up to the top of the page?

My content div seems to be about 10 pixels down from the top of the page displayed. I want it to go all the way to the top. I am new to web page design and cannot figure out why/where in the code this is controlled. Have found a web site that I would like to mimic, but can't without fixing this problem. Help!

Not sure I understand what you want. I just started with a template that was in Dreamweaver & have barely started entering any content.
I will send the code for the entire page, I guess.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title></title>
<style type="text/css">

</style>
<link href="css/gartech.css" rel="stylesheet" type="text/css" />
<style type="text/css">
body {
background-image: url(images/page-bkgd2.gif);
</style>
</head>
<body>
<div class="container">
<div class="header"><a href="#"><img src="" alt="Insert Logo Here" name="Insert_logo" width="180" height="90" id="Insert_logo" style="background: #C6D580; display:block;" /></a>
    </div>
<div class="sidebar1">
    <ul class="nav">
      <li><a href="#">Link one</a></li>
      <li><a href="#">Link two</a></li>
      <li><a href="#">Link three</a></li>
      <li><a href="#">Link four</a></li>
    </ul>
    <p></p>
</div>
<div class="content">
    <h1><strong><img src="images/microscope.jpg" alt="Microscope" width="310" height="210" align="left" class="contentimage" /></strong></h1>
    <h1><strong>Company Profile</strong></h1>
    <p>GarTech is an electronics technical contracting company specializing in all aspects of electronic product development. From new product design and prototyping to mid-volume production, GarTech has a reputation for providing high quality solutions and quick turnaround - made possible by their extensive knowledge of the industry. GarTech has expertise in developing OEM harnessing, control panels, test equipment, and other heavy duty industrial, marine, and automotive engine related electronic hardware.<br />
    </p>
    <h3> </h3>
    <h3>GarTech offers engineering and design services in the following areas: </h3>
    <ul>
      <li>OEM harnessing </li>
      <li>Embedded Controller Design </li>
      <li>Electronic Vehicle System Integration </li>
      <li>Local and Remote engine monitoring systems </li>
    </ul>
    <h3>GarTech can also create completely custom PC applications utilizing Windows or Linux: </h3>
    <ul>
      <li>USB/CAN/Serial communications </li>
      <li>Firmware download can be supported </li>
      <li>Any type of user control can be configured </li>
      <li>Data collection, Database interfacing </li>
      <li>Automated scripting </li>
      <li>Any user defined feature...</li>
    </ul>
    </div>
<div class="footer">
    <p>Copyright 2011 </p>
    </div>
</div>
</body>
</html>

ITunes Store window automatically scrolls back to the top of the page

Hey gang -
I have a problem that is really quite funny except for the fact that I am so frustrated I could cry.
Computer/software: MacBook OSX 10.4.11 with iTunes 7.6
This just started on my Macbook: I open the iTunes store and when I try to navigate down the page, the second I "let go" of my scroll the window immediately scrolls back to the top of the page. This seems to be happening on all pages in the iTunes store. No other program seems to be affected, neither is my library within iTunes - just the store. This happens when I use the trackpad, the scroll bars and my bluetooth mouse.
I can't get any iTunes content beyond the height of my Macbook window! It is maddening!
I have closed and opened iTunes several times and rebooted twice. Any other ideas?
Thank you!

Hi There
I had the same problem and im using iTunes 7.6.1 (9)
The problem seems to be related to what kind of firewall your behind.
The network I'm on at the moment is very strict and will not allow anything else than www basicly. So I connected to a different network via VPN and use it as my default gateway. iTunes stops scrolling back after I connect to this network (a restart of iTunes might be needed). And I think this is the only place that iTunes has acted up. Think it works fine at my home lan.
Hope this helps and that you haven't thrown your mac out the window!

Att Yahoo has a new format that includes highlighted, scrolling spam at the top of the in box

Is there a way to get rid of the spam at the top of the inbox. The ads scroll and say sponsored on the far right. A call to att was not productive in returning to the previous format that did not have spam. They are calling this their "new and improved version." They have also changed the way email appears when it is sent and responses are made which show "me' as from and "me" as response which is not helpful in locating old email. Could use a referral for a better email server.

You can look at the Adblock Plus extension if you want to block content.
* Adblock Plus: https://addons.mozilla.org/firefox/addon/adblock-plus/
You need to subscribe to a Filter list (e.g. the EasyList).
* http://adblockplus.org/en/subscriptions
* http://adblockplus.org/en/getting_started
You can ask advice at the Adblock Plus forum if there are problems with this extension or with a filter list or if you need help to create a filter rule to block content.
* https://adblockplus.org/forum/

From time to time Firefox will not allow me to scroll down a web page, when I scroll down it will jump right back to the top of the web page. Any ideas?

Sometimes when on firefox when I try to scroll down a web page it will immediately jump right back to the top of the web page as soon release the mouse button. When it starts happening it will do this on all open tabs on all web sites.
Just closing Firefox and reopening it does not help, only way I have found to fix this is to reset my computer.

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers
You can check for problems caused by a recent Flash 11.3 update and possibly downgrade to Flash 11.2 or 10.3.
*https://support.mozilla.org/kb/flash-113-doesnt-load-video-firefox
*https://support.mozilla.org/kb/flash-113-crashes

Firefox inverting the top of the browser and placing in footer on scroll

when i scroll down the browser flips the top of the page and paces it in the footer, greyed out.
tested OK in safari, android and iPhone 4s
http://cl.ly/image/0I0J2x0L1F06

On mine, when I scroll the Firefox Error Console (Tools menu > Web Developer > Error Console) filled up with errors related to jQuery. I also don't get any large orange regions. And it seems that the body content is overlapping the header area. Not sure what's going on here.

Is it possible to pin my navigation to the top of the browser until I reach a certain point on the page and then let it continue to scroll normally?

I'm trying to get my navigation to pin to the top of the browser while other scroll effects are taking place, then when it reaches a certain point on the page, I want the navigation to continue moving up and off the screen to allow for the footer to come in. Is this possible?

Merci Éric de me revenir en français, je l'apprécie beaucoup. Je ne veux conserver que le mouvement de haut en bas et de bas en haut. Je ne vois pas l'utilité du mouvement horizontale (gauche-droite, droite-gauche) et pire encore, par mégarde je fais trop souvent bouger ainsi mon texte et cela m'embête, même me dérange beaucoup. Même que cela me donne même mal au coeur hahahahahaha!
Par contre, ma souris précédente avait le mouvement de défilement du haut en bas et bas en haut et cela par contre m'est très utile. Je voudrais donc savoir s'il existe un moyen de stopper le mouvement de côté mais conserver tout de même la fonction du mouvement haut-bas et bas-haut avec le simple toucher de la souris. Suis-je plus clair? Disons que c'est plus aisé pour moi en français. merci à toi
Danielle

Start typing at the top of the document?

When I start a text document in a blank canvass, how do I eliminate the wide rectangle at the top so I can start typing at the top of the one inch margin?

I was able to delete the header text box.

Suddenly, the text color palette displays off the top of the page until I click it, creating an cons

Suddenly, the text color palette displays off the top of the page until I click it, creating an constant unnecessary extra step when selecting color. After searching extensively, I cannot locate any way to change this. Any suggestions?
This bug is driving me nuts. Anyone else having the same problem? Have you solved it?
Thanks!

Sorry, Peter. I cannot. When I click to capture the screen, the palette disappears. Perhaps I can better describe it: when I wish to select a text color, I used to get a drop down palette. Now the palette is "dropping up," so it disappears off the top of my screen. I have to click into it to get it to drop down so I can see it. So, every time I want to pick a text color, I now have this extra step to deal with.
It started suddenly, seemingly out-of-the-blue.

Just brought a new iPod touch and when I set it up (twice now, after resenting to factory settings) there are grey squares on all screens at the top and the apps over these squares won't open. Any suggestions?

Just brought a new iPod touch and when I set it up (twice now, after resenting to factory settings) there are grey squares on all screens at the top and the apps over these squares won't open. Any suggestions?

I can't envision what yo are seeing.
If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Content of Scrolling text won't start at the top of the frame

Similar Messages

Maybe you are looking for