Content Player navigation buttons not working for everyone

Hi,
Some of the participants are experiencing the issue with Content Player navigation buttons 'Continue' , 'End Test' etc..
We suspect it is because of the version of Java runtime environment on thier PC after eliminating the browser cache, or IE version issues.
Could anyone please tell me what are the supported Java versions for proper functioning of LSO600 Content player?
We are on ECC 6.0, LSO600 and SAP portal version EP7.
Any help is highly appreciated.
Thanks,
Jaya

Hello Jaya,
java supported version is more than JRE 1.4.2._07
and IE is IE6 and IE7
LSO supports Java 1.4.02_07 to java 1.6
Browsers:
Micorsoft IE6 and IE7.
Firefox from 2.2
If there is more than one Java version on the pc, try forcing the browser to use a certain version of Java by going to the control panel -> Java -> in java control panel go to -> java tab -> Click view in Java Applet run time settings -> Select one of the JRE to enable it and force the browser to use this version of Java.
Regards,
Manny

Similar Messages

  • Create Notification Navigation Button not working in Order Objects Tab

    Hi Gurus,
    I am having an issue in Order --> Objects tab. I want to create notification for additional  technical objects for the order. When I enter the technical object details and press enter, a "Create Notification" navigation button gets activated for that line item. But when I press that button, nothing happens. On the other hand if a select multiple line items and then press "Create Notification" button at the bottom of the line items, I am able to create notifications for the selected line items.
    Can someone help me suggest what can be the problem or suggest a Note which might restore the functionality of the "Create Notification" navigation button at the line item level.
    Thanks in advance for the help.
    Best Regards
    Vikas Hali

    Vishal,
    I dont think the Notification Create Button from line item is pretty much dependent on the Customization Settings or any sap note concerning this has not been as yet brought into my notice. In my system, this is working appropriately. The problem with this which i can think of is either an authorization issue or you should raise an oss for this.
    Regards,
    Usman

  • Navigation button not working in JSP

    JDeveloper10g JSP:
    "NestSet", "PreviousSet" button not working after a search is done on a read-only table. Is this a know bug?
    Please help!!!

    Vishal,
    I dont think the Notification Create Button from line item is pretty much dependent on the Customization Settings or any sap note concerning this has not been as yet brought into my notice. In my system, this is working appropriately. The problem with this which i can think of is either an authorization issue or you should raise an oss for this.
    Regards,
    Usman

  • Portal buttons not working for transaction type iviews

    Our buttons on our portal transaction programs quit working.  We are currently on ecc6,ehp5, portal 7.02.  The buttons still work on our test and production systems, so it's not a browser issue.  The buttons work on the newer webdynpro programs in our dev portal.  Please get back with me if you have any ideas on how to fix this button problem.  Thanks, Mike

    Hi Ajay,
    Double posting
    [ITS services not working for Transaction iview with gui for html -;
    Thanks
    Siva

  • Lock button not working for iPhone4

    Hi All,
    My lock button not working from last 2months, I am using assistive touch for time being.
    I bought my mobile in UK 1year back, currently i am staying in India.
    My real problem is, recently i visited apple store. The guys in the store are saying, it is against to their law to serve or repair mobiles which were bought in other country..
    I think this is rediculous.. Just i need some information how to fix it or how to contact the correct person regarding this POOR service.
    Thanks
    Rajesh

    No. The warranty is only valid in the country of purchase. All service for iPhones in UAE is provided by the supported carriers. You can find a list here: http://support.apple.com/kb/ht1937
    If you did not purchase it from one of the carriers listed, then you probably purchased an illegally imported gray market phone.
    Check Settings>General>About. What does it say for Model #?

  • Navigation buttons not working in iPad Adobe Content Viewer

    I am reposting this as a separate discussion from this thread (http://forums.adobe.com/message/5551618#5551618), since Bob B. said this is a separate bug from the nav button problems in Single Edition apps that people were encountering.
    Here is my problem:
    I have several folios that are a presentation of work (a slideshow per page, on most pages). Navigation buttons are needed since vertical swiping doesn't work on the pages where my images are full-width.
    Five times in the past week, the buttons have quit working (tapping a button jumps you back to the first page of the folio, instead of to Next or Prev). The only way to get them working again is to delete Content Viewer and all the content off the iPad, reinstall Content Viewer, and download the folios again. So far, I can use the folio maybe once or twice, and then the problem happens again.
    As you can imagine, this is very frustrating.
    It would be great if someone can look into this, since it does not seem to be a freak occurrence - it happens to me all the time since I got the latest version of Content Viewer.
    Thank you,
    Camille

    A tester was finally able to reproduce this bug. I'll let you know when I find more information. Thanks for reporting it.

  • Quicktime Player fast-forward and reverse buttons not working for audio

    I have Quicktime Player 7.7.3 for Windows and the fast forward/reverse buttons will not work while playing audio files. I've tried it with mp3 and m4a, neither will work.
    The go to end/go to begining buttons are working fine.
    The ff/reverse button don't work very well for video files, they only will move a few frames at a time, but they will not work at all on strictly audio files.
    I've looked at the preferences, and the software is up to date.
    the only way to ff/reverse is to go to Window > Show A/V Controls and use the Jog Shuttle, but that is a clumsy workaround. I'd rather have the playback buttons work properly in the first place.
    Is there something else I should be doing (aside from purchasing QT Pro, that is)?

    ...stupid decision to replace the iTunes feedback...
    Not replaced, just moved. Now grouped with all other Mac OS X feedback:
    http://www.apple.com/macosx/feedback/
    It's not a bug. If it was we would all have this problem. My Macs don't.
    Shut iTunes down.
    Go to ~/your user name/Library/Preferences and place the file "com.apple.iTunes.plist" in the trash.
    Try iTunes again. If your problem is solved, empty the trash.

  • Page navigation buttons not working properly

    Hi,
    I am having a multilingual Java Application (e.g. English, Japanese, French...).  In this application there are reports which display the data using locale parameter (like en_US, ja_JP etc.) to display the data in selected language.
    The problem comes up when I see Japanese reports on English operating system machine and vice versa.
    When I click any button of page navigation it changes the page number but does not load and display the page accordingly.
    It's like when I run the report it displays the first page, then clicking on Next button brings 2 in navigation field but the report  would still show first page, same happens for 3, 4.... all pages. 
    The other navigation buttons also do not work, they change the page number but display only the first page.
    This problem does not occur when I see Japanese reports on Japanese OS machine and English reports on English OS machine.
    However my clients need the first case, Japanese reports should work on English OS machine also.
    Please advise urgenly.

    Hi,
    I resolved the above issue by removing the call to method setProductLocale in jsp file (which was really unnecessary in code as product locale is meant to set languange for crystal report design environment ).
    Actually the problem was I had set locale at two place
                    1. using setLocale method of ReportClientDocument object) after the initialization of report client document object
                    2. using setProductLocale method of CrystalReportViewer object after the initialization of Crystal Report Viewer  object
    After commenting out code for setProductLocale, reports in all languages and all their functionalities started working 100% perfectly.
    Thanks.

  • Slideshow navigation buttons not working.

    Having had the slideshow navigation buttons that exist below my photos (back, pause, forward) working fine for some reason they are now coming up as question marks in Safari and error boxes in Firefox and Explorer. I have not made any changes to my site but have republished since discovering the problem but it still remains.
    I have looked for the cause in iWeb but have no idea what will remedy this.
    Any help much appreciated.

    Caused by the recent update from .Mac to MobileMe and out of our hands for fixes.
    The trouble is caused by some of the links create by iWeb that point to files found on Apple servers (not your iDisk). They are usually created inside the javascript files (.js) and use incorrect URL's that previously worked when linked at .Mac but now fail at MobileMe.
    Since it is a javascript file a Web browser status bar (bottom of the window) shows a javascript:void URL but a click on the link in our iWeb (and Homepage) pages is not finding the correct Apple server files (they are not part of your iDisk and are hosted on Apple servers).
    Odd thing is that some of these URL's do work and others fail. Some do not show the mouse over change (to the pointed finger icon) but clicking in the space where they should appear triggers the javascript.
    Someone at Apple will be working late into the night to "fix" what they broke.

  • Navigation buttons not working

    Hi,
    Not sure if this is just me not being used to Windows 8 yet or a legitimate issue, but I've found that a lot of the time the 3 buttons in the top right corner (minimize, maximize and close) don't work. They're completely unresponsive. The only time they'll work is if I alt tab out of firefox and alt tab back into it. They'll then work again but as soon as I type something in the address bar or click a link on a webpage they won't work again.
    Anyone else had this?
    Cheers

    Sorry about misleading title, didn't mean navigation buttons. Couldn't think of another name for the 3 buttons in the top right hand corner.

  • Navigation button not working

    I can enter my SIM card pin to unlcok the phone and that is as far as I can go.
    The centre navigation button is not working, can't browse the phone, can't access any apps, bbm sms or any emails.
    Any suggestions?

    Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
    Now, does your trackpad work?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Trouble with Lumia 900 navigation button not worki...

    Hei guys,
    This afternoon, all of a sudden, without nothing happened, my 3 navigation buttons (back, start and search) on my nokia lumia 900 stopped working. I really can't understand what happened since 2 minutes before the buttons were working perfectly and then the sensibility of the button is completely zero.
    Tried to turn off the phone several times, but it didn't worked at all. Searched around the web but noone seems having the same problem. I found only one guy that posted a similar problem like mine but recieved only an answer that didn't look really helpful (turn off the phone for 3 days and see later).
    All the rest of the touch screen still works perfectly,  it's just the three navigation button that don't work, even tapping all the time. there's no sign of response from the phone.
    I really have no idea what's happened. Did someone had a similar, if not the same problem? any suggestion how to fix it?
    please help guys
    Thanks.

    I know this is a month old but all of  a sudden this morning I begane having the exact same problem.  
    My troubleshooting tasks so far have been to reboot the phone about 3 times.  
    I have hard reset my phone with just holding the power button down (not sliding the screen when asked to). Connected it to my computer to make sure it was updated.
    Deleted all new text messages (there was a bug a while back that can cause Windows 7 to lock up on certain formatted text messages. Then rebooted the phone again
    Deleted all new email messages from my google account on the phone. Rebooted the phone.
    And still I do not have any of my bottom buttons usable.  Has anyone figurec this out yet?  Every time I do something I have reboot the phone since I cannot back up or get to the home screen.

  • Flash Player interactive buttons not working

    I have been having this issue for months as far as I can tell. Multiple websites have this problem where I click on a button (not a link) such as a "play" or "share" button and nothing happens. These same buttons work on other computers however. I went to Apple support for help and they told me it was a Flash issue, and led me to your contact page.
    Example websites with problems:
    Searching For Sound - I cannot play the video, I click play and nothing happens
    * Cafe del Mar Chillout Mix May 2014 * by DJ.Jurag | Mixcloud - I cannot press play, share, repost, like, or add. Nothing happens when I click these buttons
    I have tried restarting my computer, reinstalling flash, changing plug-in permissions to "allow",  and trying a new browser to no avail.
    I have submitted this as a bug on your bugbase. The bug # is 3863474 which you can find here, with my computer specs: Bug#3863474 - Flash Player Play Buttons (and other buttons) unresponsive
    I own a Macbook Pro Retina which I bought this summer (2014), late 2013 model with 10.9.5, 16GB RAM, 2.6 Ghz Intel Core i7, NVIDIA GeForce GT 750M 2048 MB, 1TB Solid State
    Please help.

    I'm assuming you're using Safari. 
    Do you have the same issue with Google Chrome?  http://www.google.com/chrome/
    It uses a significantly different version of Flash Player from the one shared by Safari and FIrefox.  It would also be interesting to know if the issue happens both in Safari and Firefox.

  • Secure Zone password set (send log in details email) link not working for everyone

    Hi Guys,
    I have a site with three secure zones for different online programs. We're beginning to sell some programs and, because we aren't using a seemless gateway, we are manually subscribing them to the secure zones then clicking the 'Send log in details email' button. The email seems to be going out which is good. But, some clients can't click on the link to set their password. Nothing happens. Even if they copy and paste the link text into a browser window, still nothing.
    Anybody know why this would be working for some people and not others. Could it be to do with cookies or email clients etc. We are at a loss and therefore have lost two sales so far (they asked for refunds) because they couldn't access their programs in the secure zone.
    Any help greatly appreciated.

    Thanks LiamDilley for such a prompt reply. Currently my code looks like this:
         ...and your password is [<strong>{tag_password}</strong>]
    Are you saying that I should be changing the '[<strong>{tag_password}</strong>]' to:
    [<strong>,a href="{tag_password}>{tag_password}</a></strong>]
    The thing is, most of the time the link text appears as a link, but not for everyone. Do you think this will fix it?

  • Content Search Web Part not work for Office Web Apps

    Hi ,
    In Content Search Web Part word documents are not able to open in browser,but in document library  its working.
    Office Web Apps not work in Content search web part
    Please help me
    Regards
    Sachin

    Below is the display template to open the document in OWA.
    <html xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882"> 
    <head>
    <title>AdSpace Picture on top, 3 lines on bottom</title>
    <!--[if gte mso 9]><xml>
    <mso:CustomDocumentProperties>
    <mso:TemplateHidden msdt:dt="string">0</mso:TemplateHidden>
    <mso:ManagedPropertyMapping msdt:dt="string">&#39;Picture URL&#39;{Picture URL}:&#39;PublishingImage;PictureURL;PictureThumbnailURL&#39;,&#39;Link URL&#39;{Link URL}:&#39;Path&#39;,&#39;Line 1&#39;{Line
    1}:&#39;Title&#39;,&#39;Line 2&#39;{Line 2}:&#39;Description&#39;,&#39;Line 3&#39;{Line 3}:&#39;&#39;,&#39;FileExtension&#39;,&#39;SecondaryFileExtension&#39;,&#39;ContentTypeId&#39;,&#39;ServerRedirectedURL&#39;</mso:ManagedPropertyMapping>
    <mso:MasterPageDescription msdt:dt="string">This Item Display Template will show a 304x100 picture of the item on top. The title and the default item description will display to the bottom of the picture with an additional line that is available
    for a custom managed property.</mso:MasterPageDescription>
    <mso:ContentTypeId msdt:dt="string">0x0101002039C03B61C64EC4A04F5361F385106603</mso:ContentTypeId>
    <mso:TargetControlType msdt:dt="string">;#Content Web Parts;#</mso:TargetControlType>
    <mso:HtmlDesignAssociated msdt:dt="string">1</mso:HtmlDesignAssociated>
    <mso:_dlc_DocId msdt:dt="string">ZRMVMDDDEAE7-1-215</mso:_dlc_DocId>
    <mso:_dlc_DocIdItemGuid msdt:dt="string">583b0835-32ff-4d1c-983f-b6ff4a0ef956</mso:_dlc_DocIdItemGuid>
    <mso:_dlc_DocIdUrl msdt:dt="string">http://sp2013-dev-6:7000/sites/adspace/_layouts/15/DocIdRedir.aspx?ID=ZRMVMDDDEAE7-1-215, ZRMVMDDDEAE7-1-215</mso:_dlc_DocIdUrl>
    <mso:HtmlDesignConversionSucceeded msdt:dt="string">True</mso:HtmlDesignConversionSucceeded>
    <mso:HtmlDesignStatusAndPreview msdt:dt="string">http://sp2013-dev-6:7000/sites/adspace/_catalogs/masterpage/Display Templates/Content Web Parts/Item_PictureOnTop.html, Conversion successful.</mso:HtmlDesignStatusAndPreview>
    </mso:CustomDocumentProperties>
    </xml><![endif]-->
    </head>
    <body>
        <!--
                Warning: Do not try to add HTML to this section. Only the contents of the first <div>
                inside the <body> tag will be used while executing Display Template code. Any HTML that
                you add to this section will NOT become part of your Display Template.
        -->
        <script>
            $includeLanguageScript(this.url, "~sitecollection/_catalogs/masterpage/Display Templates/Language Files/{Locale}/CustomStrings.js");
        </script>
        <!--
            Use the div below to author your Display Template. Here are some things to keep in mind:
            * Surround any JavaScript logic as shown below using a "pound underscore" (#_ ... _#) token
            inside a comment.
            * Use the values assigned to your variables using an "underscore pound equals"
            (_#= ... =#_) token.
        -->
        <div id="Item_PictureOnTop">
    <!--#_
    var useWACUrl = !$isEmptyString(ctx.CurrentItem.ServerRedirectedURL);
            if(ctx.ScriptApplicationManager && ctx.ScriptApplicationManager.states){
                useWACUrl = (useWACUrl && !ctx.ScriptApplicationManager.states.openDocumentsInClient);
            var appAttribs = "";
            if(!useWACUrl)
                if (!$isEmptyString(ctx.CurrentItem.csr_OpenApp)) { appAttribs += "openApp=\"" + $htmlEncode(ctx.CurrentItem.csr_OpenApp) + "\"" }; 
                if (!$isEmptyString(ctx.CurrentItem.csr_OpenControl)) { appAttribs += " openControl=\"" + $htmlEncode(ctx.CurrentItem.csr_OpenControl) + "\"" };
            var url = ctx.CurrentItem.csr_Path;
         if($isEmptyString(url)){
                if(useWACUrl)
                    url = ctx.CurrentItem.ServerRedirectedURL;
                } else {
                    url = ctx.CurrentItem.Path;
    var encodedId = $htmlEncode(ctx.ClientControl.get_nextUniqueId() + "_pictureOnTop_");
    var linkURL = $getItemValue(ctx, "Link URL");
    linkURL.overrideValueRenderer($urlHtmlEncode);
     var iconURL = Srch.ContentBySearch.getIconSourceFromItem(ctx.CurrentItem);
    var line1 = $getItemValue(ctx, "Line 1");
    var setLineHeightRenderer = function(valueInfoObj)
        if(!$isNull(valueInfoObj) && !valueInfoObj.isEmpty)
            if(!$isNull(valueInfoObj.defaultValueRenderer))
                return valueInfoObj.defaultValueRenderer(valueInfoObj);
            else
                return valueInfoObj.toString();
        else
            return "&nbsp;";
    var line2 = $getItemValue(ctx, "Line 2");
    line2.overrideValueRenderer(setLineHeightRenderer);
    var line3 = $getItemValue(ctx, "Line 3");
    line3.overrideValueRenderer(setLineHeightRenderer);
    var pictureURL = $getItemValue(ctx, "Picture URL");
    var pictureId = encodedId + "picture";
    var pictureMarkup = Srch.ContentBySearch.getPictureMarkup(pictureURL, 304, 100, ctx.CurrentItem, "cbs-pictureOnTopImg", line1, pictureId);
    var containerId = encodedId + "container";
    var pictureLinkId = encodedId + "pictureLink";
    var pictureContainerId = encodedId + "pictureContainer";
    var dataContainerId = encodedId + "dataContainer";
    var line1LinkId = encodedId + "line1Link";
    var line1Id = encodedId + "line1";
    var line2Id = encodedId + "line2";
    var line3Id = encodedId + "line3";
     _#-->
            <div class="top-content-box" id="_#= containerId =#_" data-displaytemplate="ItemPictureOnTop">
                <div class="top-content-img" id="_#= pictureContainerId =#_">
                    <a class="cbs-pictureImgLink" href="_#= $urlHtmlEncode(url) =#_" title="_#= $htmlEncode(line1) =#_" target="_blank" id="_#= pictureLinkId =#_">
                        _#= pictureMarkup =#_
                    </a>
                </div>
                    <h3 id="_#= line1Id =#_"><a class="cbs-pictureOnTopLine1Link" target="_blank" href="_#= $urlHtmlEncode(url) =#_" title="_#= $htmlEncode(line1) =#_"
    id="_#= line1LinkId =#_"> _#= line1 =#_ </a></h3>      
                    <span class="content-date" title="_#= $htmlEncode(line2) =#_" id="_#= line2Id =#_"><img class="cbs-Thumbnail" src="_#= $urlHtmlEncode(iconURL) =#_"
    alt="_#= $htmlEncode(line1.defaultValueRenderer(line1)) =#_" id="_#= pictureId =#_" />_#=line2=#_</span>                
            </div>
        </div>
    </body>
    </html>
    Basically,ctx.CurrentItem.ServerRedirectedURL is calculated by a managed property ServerRedirectedURL which needs to be included in the display template.
    Problem solved.
    Nehal Bhandari,ATL, Nagarro Softwares

Maybe you are looking for