Content Repository is not in Running status

Hi everyone,
We have installed a content server4.6 ,we created a content repository through oac0 t-code . It was working fine till yesterday, i mean the status of the content repository is Running, suddenly today when we saw the status of the content repository its not in Running status, it is showing as data(28%),log(74%).
All the configurations are fine, we haven't change anything in the configuration.
Please suggest me with your valuable information.
Thanks in advance,
Regards,
Praveen

Hi Deepak,
I couldn't find any start button and STATUS tab,
FYI:
CSADMIN screen and OAC0 test connection screenshots are below.

Similar Messages

Error in Test Connection - Content Repository does not exist

Hi, I have created a content repository which points to our own external HTTP content server which is a DMS through transaction OAC0.
In transaction CSADMIN I can see our server's status as running, still it shows yellow icon "customizing missing" in CSADMIN and in transaction OAC0 whenver I click "Test Connection" it gives the message" Content Repository does not exist". CMS 106.
Kindly help.
Regards
Neha

Hi,
We are using OACO as follows:
Choose Tools ® Business documents, Environment ® Knowledge Provider® KPro® Content Repositories
Enter the following fields in the u201CChange Content Repositories : Detailu201D :-
1) Content Rep. :- ZO (Content Repository Name)
2) Description :- Content Repository
3) Storage type :- HTTP content server.
4) Version no :- 0045
5) HTTP svr:p :- IP or machine name of application server on which DMS has been deployed : Web port of the application server on which DMS has been deployed.
1) Program :- sap/sapDocView.jsp
Save the created Content Repository by clicking on u201CSaveu201D. We are working on SAP 4.7 versionon a SAP development server and the content repository has not been transported after creation. Will not transporting be causing this error ?
Please reward points
Thanks
Vikranth

Test Connection - Content Repository does not exist

Hi,
I have created a content repository which points to our own external HTTP content server which is a DMS through transaction OAC0.
In transaction CSADMIN I can see our server's status as running, still it shows yellow icon "customizing missing" in CSADMIN and in transaction OAC0 whenever I click "Test Connection" it gives the message" Content Repository does not exist". CMS 106.
Kindly help.
Regards
Neha

Hi,
We are using OACO as follows:
Choose Tools ® Business documents, Environment ® Knowledge Provider® KPro® Content Repositories
Enter the following fields in the u201CChange Content Repositories : Detailu201D :-
1) Content Rep. :- ZO (Content Repository Name)
2) Description :- Content Repository
3) Storage type :- HTTP content server.
4) Version no :- 0045
5) HTTP svr:p :- IP or machine name of application server on which DMS has been deployed : Web port of the application server on which DMS has been deployed.
1) Program :- sap/sapDocView.jsp
Save the created Content Repository by clicking on u201CSaveu201D. We are working on SAP 4.7 versionon a SAP development server and the content repository has not been transported after creation. Will not transporting be causing this error ?
Please reward points
Thanks
Vikranth

Content repository does not exist

Hi,
Kindly see the way we are creating the SAP content repository pointing to an external content repository which is our own DMS server. Our server is returning the success status in CSAdmin. But customizing is being shown as missing.
When I click on Test Connection, then I get the error CMS 106 content repository does not exist.
It seems as the content repository created by us is visible in the content repository list, entry is there in TOAAR table too, still somehow SAP system thinks that it doesnt exist.
We are working by logging into quality testing client. Kindly suggest do we need to login into customizing client to solve this problem. And also suggest is transporting necessary to complete the content repository creation.
Is it related to contentserver.ini file, do we need to see whether there's entry in it.
Kindly help.
With Regards
Neha

in customizing of the archiving object is a field where you specify an indicator for the content repository.
(go SARA -enter archiving object - click customizing button - click technial settings)
As archiving objects are customized in DEV and transported to PRD systems, here often an indicator for the DEV content repository is transported to PRD.
But usually you dont have customizing for the DEV conentent repository in PRD to avoid that you write into the wrong content repository.

Content repository-401 not able to create

SAP experts,
When i try to create a content repository i am getting this 401 error. I enter in through OAC0 gave the server details taken from basis moved to CS admin. it takes to create section when i click on create it asks for log in and later give "HTTP error: 401 (unauthorized) "Permission denied: adminContRep&configGet "
please help on the same

Dear Satish,
Contact your Basis Administrator. The user ID is required is with Basis Guy.
With Warm Regards
Mangesh Pande

Content repository is not showing the recently added content on jspx page .

Hi All,
I have uploaded some doc on UCM using check_in web service call.
I see all my content are uploaded successfully but recent uploaded contents are not reflecting on my page .
Even i set partial trigger but its showing it .
I printed the content using GET_SEARCH_RESULTS service but still its showing old content .
If i logged out from current session and logged in again i am able to see those changes .
Please provide your i/p.
Thanks,
Arun.

It does not get refreshed, even if you fill up the table with the values from the call to the get_search_results?
I thought it was an issue because we uploaded documents outside of the knowledge of the data control...
But if you don't use the DC to display the data and use a call to the get_search_results and that also does not show the data... than their must be something else...
Perhaps you can ask this in the enterprise content management forum. Their are more experts on this. Maybe they know what the issue is. I will look into it if i have a bit more time but for now i have other stuff to do...

Archive Link Error - Content Repsoitory does not exist

Hi,
I have created a content repository which points to our own external HTTP content server which is a DMS server through transaction OAC0.
In transaction CSADMIN I can see our server's status as running, still it shows yellow icon "customizing missing" in CSADMIN and in transaction OAC0 whenver I click "Test Connection" it gives the message" Content Repository does not exist". CMS 106.
Kindly help.
Regards
Neha

Hi,
Check this URL for Content Repository Archive set up guidelines:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARC/CAARC_INTRO.pdf
Thanks.
Boopathi

Is SAP customizing client required to create a content repository ?

Hi,
We are facing an issue where we create a content repository pointing to an external content server. Then when we click on test connection then we get an error" Content repository does not exist".
Can it be cause we are doing work in a testing client having 555 number rather than a customizing client going by the number of 100 or 300 ?
Is transporting content repository required to use it to make an external HTTP server connection ?

You need to supply the "Key Store Location", "Key Store Password", "Private Key Alias" and "Private Key Password' to use socketssl.
Also please make sure that the content server has enabled "Use SSL". You can configure it using the enterprise manager.

Archive Link - Content Repository - Test Connection error

Hi all,
We are trying to create a content reposiotry in SAP 4.7, it gets created and is displayed in SAP content reposiotry list.
But when I click on "Test Connection" I get the error "Connection Repository does not exist".
Please help as its very critical to solve the problem at the earliest.
Regards
Neha

We are using OACO as follows:
Choose Tools ® Business documents, Environment ® Knowledge Provider® KPro® Content Repositories
Enter the following fields in the u201CChange Content Repositories : Detailu201D :-
1)   Content Rep. :- ZO (Content Repository Name)
2)    Description :-   Content Repository
3)    Storage type :-   HTTP content server.
4)    Version no   :-    0045
5)     HTTP svr:p :- IP or machine name of application server on which DMS has been deployed : Web port of the application server on which DMS has been deployed.
1)       Program :-   sap/sapDocView.jsp
Save the created Content Repository by clicking on u201CSaveu201D. We are working on SAP 4.7 versionon a SAP development server and the content repository has not been transported after creation. Will not transporting be causing this error ?
Edited by: Neha Bhambu on May 27, 2008 11:09 AM

Dms content repository not running

Hey friends,
While creating content repository i went oac0 gave the clicked in create gave the details selected dms as document area, storage type as 04 http content server. Gave version 0046, port number as 1090, server name and server script as details given by basis. clicked on send certificate. Went to CS admin and saw that server status is running with green light in over view section.
a) But when i come back and click on test connection it says content repository doesnt exists what may be the issue.
b) also in details tab repository status shows only defined should it be running or defined?
regards,
satish

Hello Pradeep,
Again thanks a lot for the help.
Server log trace means are you pointing to running of report to get RFC error by running the report PCMRVC if so then below find the below.
HTTP interface test using function group SCMS_HTTP
23.12.2011 16:35:00
serverInfo:
contRep                   ZTEST1
contRepDescription        client docs storage
serverStatus              running
serverVendor              Copyright SAP AG, All rights reserved 1998, 2001
serverVersion             6400
serverBuild               201
serverTime                110500
serverDate                23.12.2011
serverStatusDescription
pVersion                  0046
contRepStatus             defined
contRepStatusDescription
                                                  ok            8,659
create(1): new doc (frontend)
check_subrc: subrc     2 instead          0
check_subrc: HTTP error: 500 (Internal Server Error) "ContRep ZTEST1 or Storage entry not defined"
create(1): new doc (frontend)                    error
create(2): new doc (back end)
check_subrc: subrc     1 instead          0
check_subrc: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Timeout during connection setu p (check that partner exists
create(2): new doc (back end)                    error
delete(1): unknown doc
check_subrc: subrc     2 instead          1
check_subrc: HTTP error: 500 (Internal Server Error) "Internal error: rc=0, ContRep ZTEST1 or Storage entry not defined "
delete(1): unknown doc                           error
putCert:                                          ok           11,662
         3 errors

Content repository FD does not exist :user agent sap web application server

Hi All
i am using 3rd party software(dms SERVER) and connecting it using archive link interface SAP HTTP 4.5 AL
i have created a new repository with name FD using tcode OAC0.when i give inputs in OACO and click on test connection it gives me information Content repository FD does not exist
here is my HTTP trace at receiver content server side
TRACE:(5) - GET /Default.aspx?serverInfo&pVersion=0045&contRep=FD HTTP/1.0
TRACE:(5) - user-agent: SAP Web Application Server (1.0;700)
TRACE:(5) - host: SERVERIP:PORT
TRACE:(5) - accept-encoding: gzip
TRACE:(5) -
--> C05 --> S06 ==== (15.583) Request <GET /Default.aspx?serverInfo&pVersion=0045&contRep=FD HTTP/1.0>
--> C05 --> S06 GET /Default.aspx?serverInfo&pVersion=0045&contRep=FD HTTP/1.0
--> C05 --> S06 user-agent: SAP Web Application Server (1.0;700)
--> C05 --> S06 host: SERVERIP:PORT
--> C05 --> S06 accept-encoding: gzip
--> C05 --> S06 ==== Body 0 bytes
--> C05 --> S06 Body =>
Sockets 6 of 4,5,6 need checking ####
TRACE:(6) - HTTP/1.1 200 OK
TRACE:(6) - Cache-Control: private
TRACE:(6) - Content-Length: 189
TRACE:(6) - Content-Type: text/plain; charset=utf-8
TRACE:(6) - Server: Microsoft-IIS/7.5
TRACE:(6) - X-AspNet-Version: 2.0.50727
TRACE:(6) - boundary:
TRACE:(6) - X-dateC: 2010-10-22
TRACE:(6) - X-timeC: 07:07:23
TRACE:(6) - X-dateM: 2010-10-22
TRACE:(6) - X-timeM: 07:07:23
TRACE:(6) - X-contentRep: FD
TRACE:(6) - X-numberComps: 1
TRACE:(6) - X-docId: 0
TRACE:(6) - X-docStatus: online
TRACE:(6) - X-pVersion: 0045
TRACE:(6) - X-ContentServer: contentServer=Server ip;contentServerPort='9025;pVersion='0045';id='DMSSRV1'
TRACE:(6) - X-Powered-By: ASP.NET
TRACE:(6) - Date: Fri, 22 Oct 2010 13:37:23 GMT
TRACE:(6) - Connection: close
TRACE:(6) -
TRACE:(6) - serverType='DMSSRV1';1;serverVersion=12;serverPatch=0;serverBuild=180;pVersion='0045';serverStatus=running;serverStatusDescription=;serverDate='2010-10-22';serverTime='07:07:23';startUpDate='2010-10-22';startUpTime='07:07:23';lastAccessDate='2010-10-22';lastAccessTime='07:07:23';contRep='FD';contRepStatus=defined;contRepStatusDescription=;contRepDescription=Content-Repository Test;contentStorageHost=localhost;contentStorageName=FD;secKeyVerification=y;defaultDocProt=rucd;
one change which i have observed in this trace is .. this trace is showing trace agent as SAP Web application server ... ideally it should show user agent :SAP HTTP
Please suggest me some solution.
Thanks
sandeep

Dear all,
my issue is resolved.I solved my issue myself
solution: SAP sends HTTP request in the form of URL like
http://serverip:port/GET /Default.aspx?serverInfo&pVersion=0045&contRep=FD HTTP/1.0
Now your response should contain string contRep="FD"
dont forget double quotes on repository name coz SAP program matches string with double quotes. if you will return value like this contRep=FD
this will through error.
Thanks
sandeep sharma

Explanation of Status field in Content Repository in Customizing ?

Hi
When we open the Content repository in customizing (OAC0) & click on CS Admin , under the Details Tab there is a field status which shows % for data & logs. What do this percentages represent.
In our system it displays data 76% , Log 6%.
Clicking F1 did not provide any info. I would appreciate if someone can let me know what this % represent.
Regards
Satish

Your Basis consultant would know this...
check
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/44/2283e24c957e488230073c7f863ceb/frameset.htm

SAP Content Repository Status Is offline

Dear SAP Consultants,
When i am to accessing my content server URL:- http://<IP>:1090/ContentServer/ContentServer.dll?serverInfo
it gives me in return :-
serverType="SAP HTTP Content Server";serverVendorId="SAP AG";serverVersion="640";serverPatch="7";serverBuild="23";pVersion="0046";serverStatus="running";serverDate="2011-12-08";serverTime="11:34:12";startUpDate="2011-12-08";startUpTime="10:39:05";lastAccessDate="2011-12-08";lastAccessTime="11:24:49";
contRep="ZCONT_TEST";contRepStatus="offline";contRepStatusDescription="SQLConnect failed, [SAP AG][LIBSQLOD SO][MaxDB] Unable to connect to data source;-709 CONNECT: (database not accesssible: pipe open (6:No s), Error Code: -709";storageVersion="17";storage="SAPDB";buildLevel="1";contentStorageName="SDB";contentStorageHost="localhost";security="1";contRepDescription="test content repositry";defaultDocProt="";
contRep="ZDMS_C1";contRepStatus="offline";contRepStatusDescription="SQLConnect failed, [SAP AG][LIBSQLOD SO][MaxDB] Unable to connect to data source;-709 CONNECT: (database not accesssible: pipe open (6:No s), Error Code: -709";storageVersion="17";storage="SAPDB";buildLevel="1";contentStorageName="SDB";contentStorageHost="localhost";security="0";contRepDescription="Database storage documents";
Please Help Regarding the issue as my MAXDB database and Content server both are up and running
Due this error i am not able to check in documents in content repositories..
Regards
Gagan Sharma
Basis Consultant

Hi,
Could you do the following
1) Delete the content repository entry and re-create the same using CSADMIN.
2) Start the content repository using the start button visible in CSADMIN.
Hope this helps.
Regards,
Deepak Kori

Content server is not running.

All,
I have rather peculiar issue. The external 10.1.3.1 content server is setup against EBS 12.1.3.The content server is running fine and I was able to upload content using it. I fail to upload content all of the sudden until EBS is bounced. Nothing changes on content server side and again it works for day or two and stops and throws "Content server is not running" error. Is there any EBS configuration that can cause this behavior? I do not even see the request being logged in default-web-access-<date>.log on content server that indicates that it is not even reaching content server. It works fine in TEST environment and in PROD it is behaving in this manner. This is a new setup.
Any pointers are appreciated.
Thanks,
Faisal

The fact that bouncing EBS fixes the issue temporarily indicates that the problem is most likely on the EBS end, but we haven't encountered that specific issue. What OS are you using to host EBS? Are you purging the J2EE cache when you bounce the services?
Feel free to reach out to Anne or myself if you'd like to dive into this. We could test with an alternate content server to see if that helps isolate the problem.
Best,
John Hobart

Init: smb(5) repository server not running

error message
init: smb(5) repository server not running
Hello guys,
I'm new to Sun OS and would very much appreciate if someone could identify what is the issue here and its possible solution
Background: I was booting up SunOS 10 on my vmware to carry out some tests and suddenly the electicity tripped and my server crashed (along with the just booting SunOS in vmware)
After i restored the electricity, i was trying to boot up the SUN OS again, but it just dosent start the GUI! It asks me for the root password and then just sits about! When i try to start the GUI with a init 6 it displays the error message
Any Help Appreciated

Guys
Sorry for being a DODO!
I've managed to read all the help messages, the helpful Sun OS presented and understood that i could run the command below, which guides me to run further commands and i've managed to resolve the issue! I can see my GUI now! I'm saved!
/lib/svc/bin/restore/repository
Thanks for taking the time to read this.

Content Repository is not in Running status

Similar Messages

Maybe you are looking for