Content server 404 auth error

hopefully this is where this should be posted.
we have a pc-ui application that needs to retrieve a signature that was captured via crm mobile sales and sychcronized to crm online. currently we can not get the signature to synchronize.
we are trying to synch a captured signature and are getting error messages in the sBdoc's indicating http 404 authorization failure, before this error we had "no user" set up in sicf sap/bc/contentmanagement
the demo system shows a dialog user of crmixos with no special authorizations. what is the best way to set up a user and what authorizations are needed?
also our demo system uses (I think) a http content repository while we are using a storage category of r/3 database.
thanks in advance for any guidance.

With the updated 401, is just means that you have to "stand and identify" yourself to the server. Somehow you will have to send you authentication information.
If you should ask the best way, then of course HTTPS.
Alternatives are using simple basic authentication, putting name+password in ICF (only if you really understand the consequence of this and have read the documentation on not using a dialog user), placing it in the URL (not recommended as it lands in the browser history), using SSO2.

Similar Messages

SAP Content Server Configuration (CSADMIN) error in connection

Dear Colleagues
I have installed SAP Content Server 6.40 on Windows 2008 R2 server (64 bit) using IIS 7.5 with MaxDB 7.8.02, Installation completed successfully.
URL testing Information on both Content Server and an Instance which we need to connect to it.
http://cs460:1090/ContentServer/ContentServer.dll?serverInfo
serverType="SAP HTTP Content Server";serverVendorId="Copyright SAP AG, All rights reserved 1998, 2001 ";serverVersion="6400";serverPatch="9";serverBuild="201";pVersion="0046";serverStatus=
"running";serverStatusDescription="";serverDate="2014-05-11";serverTime="02:03:08";startUpDate="2014-05-11";startUpTime="02:03:08";lastAccessDate="2014-05-11";lastAccessTime="02:03:08";
However, when I try to create repository with CSADMIN tcode, I am getting error ''HTTP error: 500 (Internal Server Error)'.
database host is up or down and the web server up
My settings are as follows
1- On Content server I give full permission to content Rep directory
2- On IIS I have allowed Unspecified ISAPI& CGI & modules.
3-odbcreg as the following:-
C:\sapdb\SDB\db\pgm>odbcreg -g
List of installed drivers
1.      SQL Server;     %WINDIR%\system32\SQLSRV32.dll
2.      SAP MaxDB SDB (Unicode);        C:\sapdb\SDB\db\pgm\sdbodbcw.dll
3.      SAP MaxDB SDB; C:\sapdb\SDB\db\pgm\sdbodbc.dll
      C:\sapdb\SDB\db\pgm>odbcreg MaxDB -i -p c:\sapdb\SDB\db\pgm -d sdbodbcw.dll
ODBC Driver for 'MaxDB' has been successfully registered.
     C:\sapdb\SDB\db\pgm>odbcreg MaxDB -i -p c:\sapdb\SDB\db\pgm -d sdbodbc.dll
ODBC Driver for 'MaxDB' has been successfully registered.
4- under settings tab for the repository I set the parameter (driver = MaxDB) as per SAP note 977091
Please suggest, how to resolve this issue.
Thanks

HI Hany Zahran,
Hope that your issue resolved? if so please close this thread with updated answer and make sure mark assumed answered (see top of the screen).
All the best my dear fnd.
Regards,
chandu.

SAP Content Server 6.30 Error

Hi Friends
I have installed cms 6.3 on my windows server 2003. the installation is successful and now i made the configuration in my IDES system in the following sequence:
OACO: created a content repositroy ZXXX with 'Http Content Server' as storage type and 'Document Management System' as the document area
Then,In OACT, assigned the content repository to newly created category 'ZXXX_DM'
Finally in csadmin, i activated the newly created certificate.
Now, when i go back to OAC0 and click on 'test connection' it gives me the message "content repositroy zxxx does not exist".
Also,In csadmin it ask for user id and password whenever i shift between the tabs and i also get the following messages in csadmin
HTTP error: 401 (unauthorized) "Error in configSet"
HTTP error: 500 (Internal Server Error) "ContRep or Storage entry not defined"
I am confused as to where i am going wrong.
I also need to know if we can use the existing content repositories(already defined) .
Please advice
Thanks in advance.
Regards,

Hi Friends
this problem is solved.
We contacted SAP and they have resolved the issue. Although, i would suggest you all to see these notes while performing configuration for content server in your SAP system: 658442 & 851146.
these notes helped us resolving the issue.
Thanks Sunny & Thomas for your help.
thomas your parameter settings also helped.
Regards,

Content server 404 error

Hi Experts,
I hav installed Opentext server 4.6 in another server. I can communicate OT server to SAP server.
But the problem is in repository in sap. CSADMIN error wit Http:error :404 not found
my repository configration
Content Repositort A1
Description so and so
Document Area Archive link
Storage Type    http Contant server
protocol             IX HTTP2
Ver no               0046
Http Server        192.168.0.3
port no              8080
HTTP script       Archive link
Physican path   SAP server Profile path
plzz help me for this
wen i tried to create a content repository in TC- OACO and CSADMIN
it shows Http errors 404 not found
plz help me to solve this
Thanks inAdvance
Jose H

Hi,
Briefly describe your Document Access flow.
SAPHTTP Rfc is working ?
SAPHTTP.exe version ?
Please refer [SAP Note 848406 - HTTP error reported in CSADMI|https://service.sap.com/sap/support/notes/848406] and [SAP Note 164203 - Problems with SAPHTTP|https://service.sap.com/sap/support/notes/164203] to get more information.
Regards,
Bhavik G. Shroff

ICal Server 404 HTTP Error

Hi all,
I'm having a perplexing issue with iCal server. Every now and again, iCal reports that it encountered an HTTP 404 error with my iCal account on one of my Lion servers. I can't seem to figure it out. Anyone else having this issue? Any suggestions?
Chris

Do you ever get 404 errors accessing server.example.com/webcal ?
If you are using SSL check that your SSL sertificat is correctly set for iCal. In Server app go to Hardware => Server => Settings => SSL Certificate.
You can try enabling the webcal manually by doing this:
iCal with SSL:
sudo webappctl start com.apple.webapp.webcalssl
iCal without SSL:
sudo webappctl start com.apple.webapp.webcal
This rebuilds you apache httpd.conf and restarts apache which suppressing often solves problems in Lion Server. Alternatively you might try to disable all services, change your servers hostname (just go through the process but change the hostname to what the hostname already is) and then re-enable all your services.

DMS content server error

Hello SAP Experts!
I have following error when exeuting test program for checking content server RSCMST:
HTTP error: 500 Internal Server Error
It is appearing continuosly every day. Only solution I have found now is restaring Server when DMS is installed. Sometimes it takes 2 or 3 reboots to make it available back again.
Of course this is related with problems that people cannot check in documents on DMS server.
thanks for any suggestions!
Michal

hi.,
pls check..
Click Start, point to Programs, point to Administrative Tools, and then click Internet Information Services.
2. In the console tree, click Default Web Site. In the display pane, right-click Localstart.asp, and then click Properties.
3. On the File Security tab, click Edit under Anonymous access and authentication control.
4. On the Authentication Methods property page, click to clear Anonymous access.
or
restart the server.
award point if useful

War file not running in content server

i created a site using jdeveloper and deployed it as .WAR file and created a JSP security Group in cs and checked in my .WAR file with jsp Security group.When i click on cs->jsp Server Web App Admin->and click my .war file,it is showing follwing error message.
Content Server Request Failed
Error csJspServerErrorAddWebAppService Failed to add context /cs/groups/sitestudio/documents/document/~edisp/MyApp. Web application exist but unavailable. Please check JSP server log file.
plz guide...........

I am running a similar configuration at another customer and it's working okay for us. What application server are you using? You say that the portals are configured in a cluster. Is this an application server cluster? If so, then the portlet should get deployed to all nodes in the cluster if the cluster is configured correctly. I would suggest that you try deploying a simple WAR file to the cluster and see if it is deployed correctly. A restart of the cluster may be needed to make sure that all of the cluster nodes synchronize with the DAS.
- Jim

Content Server error on LINUX (HTTP error: 404 Not Found)

Hi All,
While checking the status of content sever by using the T-code CSADMIN I am getting the following error message.
***********************************************************
Error : - HTTP error: 404 Not Found
Message no. CMS025
Diagnosis
Error in accessing via HTTP
404 Not Found
*************************************************************
I have done the installation of Content server 640 on Red Hat Linux / MaxDB.
Moreover I am using the following connection data in CSADMIN.
HTTP server :- 80.0.0.205
Port Number:- 1090
HTTP Script :- ContentServer/ContentServer.dll
Version no. :- 0046
Please help me.
Thanks ,
Harshal

Hi Dagmar,
The HTTP services are working fine. But i m not able to reach the content server url can u help on this?
Please find the http trace file
ERROR => PlugInHandleServData: HttpParseRequestHeader failed (rc=701) [http_plg.c 3258]
ERROR => IcmHandleNetWrite(id=3/4782): HandleServData failed (rc=701) [icxxthrio.c 1833]
The error i am getting in Content server url is
Server Error
404 - File or directory not found.
The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.

Content server Instalation problem.---HTTP 404- ERROR FORBIDDEN

Hello Guys,
This issue is pertaining to Content server instalation with SAP 6 ECC.
Status till date:
1) content server is installed to windows 2003 server.
2) we are currently working in quality server.I have opted a 80 GB harddisk and installed windows 2003 server and also installed Content server to that.
3) i defined New content repository ZDMS_C1in OAC0
Gave appropriate description,
Doc area : Doc magt system
Storage type: HTTP content server
Version no: 0046
Http server 132.147.167.110( this is 80 gb system Ip address)
port number:1090
Http script: Contentserver/contentserver.dll
Physical path: H:usr\sap\ELD\SYS\Global\ (default selection )
i saved and i get every information of created by and last changed by....
Ok but when i test connection it says " HTTP 404:ERROR FORBIDEN".
I get another error when i "SEND CERTIFICATE"
" ERROR IN HTTP ACCESS IFHTTPCLIENT--RECEIVE 1
ICM-HTTP-CONNECTION-FAILED.
Some problem in IIS server but litraly basis team is unable to solve the status.
How to solve this issue.....Help me out in detail.
Regards,
Murali.S

Hi Murali,
Follow two NOTES 212394 & 661852
or
Ensure that PSE (Personal Security Environment) is created directly on SAP system after the system is installed, this is one time activity.
To do this you use T Code "STRUST". You can check with your Senior Basis guy for more.
By default the system's PSE is used to sign URLs. from SAP WAS you can also create your own PSE to sign Kpro URLs
Regards
Rehman

The Remote server returned an error (404) not found in SharePoint Client Context code

Hi All,
I am getting an error with below line.
"The Remote server returned an error (404) not found"
It occurs when I am trying to fetch some data from SharePoint 2010 List.
For eg. I have a webpart in which i am showing some content on page load and that content is coming from a List.
But I am getting error.
Screen shot for your reference.

Here is my code:
ClientContext context1 = new ClientContext("site url");
context1.AuthenticationMode = ClientAuthenticationMode.Anonymous;
List list1 = context1.Web.Lists.GetByTitle("List1");
CamlQuery query1 = new CamlQuery();
query1.ViewXml = @"<Query><Query><OrderBy><FieldRef Name='Title' Ascending='True' /></OrderBy>
</Query></Query>";
Microsoft.SharePoint.Client.ListItemCollection listCollection1 = list1.GetItems(query1);
context1.Load(listCollection1);
context1.ExecuteQuery();
Even i removed the line no. 2 from above code and placed below but still same issue.
context1.Credentials = new NetworkCredential("user", "password", "domain");
Hope someone will solve my issue here.

Customise error page when content server is down

Hi all,
The following message is received when the content server is down:
Web Server Error Error attempting to perform request. (Unable to connect to address.) To administrate this server use this link.
I have seen a few variations fo this mesage on different conditions.
The question is: how can we customise this page?
Many thanks

hi all,
try this
You can set up the maintenance page when at the Web server level when the application is down in the App layer. Here is the reference for Oracle HTTP server, same you can do it for any other web server too..!!
You can achieve this by configuring an error page at the WebServer (part of web-tier).
For example, in the case of a Oracle HTTP Server (OHS), you could do the following:
1. Place your maintenance page at <ORACLE_INSTANCE>/config/OHS/<component_name>/htdocs.
For Example, <ORACLE_INSTANCE>/config/OHS/<component_name>/htdocs/errorPage500.html
2. Open the OHS httpd.conf located at <ORACLE_INSTANCE>/config/OHS/<component_name> in an editor and search for the string ‘ErrorDocument 403′ which can be seen as commented text. Next to the commented text line, add the below lines for configuring the Error
Pages (500 —> backend server unavailable, 403 —> forbidden request, 404 –> Resource Not available). For the below example, we had 3 html pages errorPage500.html, errorPage403.html and errorPage404.html are deployed in OHS htdocs.
ErrorDocument 500 /errorPage500.html
ErrorDocument 403 /errorPage403.html
ErrorDocument 404 /errorPage404.html
3. Save the changes to the httpd.conf file.
4. Restart OHS server

SAP Content Server error

Hello colleagues,
I have this error when start the Content Server,
host:(/directory/apache/bin)(root)#./apachectl start
httpd: Syntax error on line 66 of /directory/apache/conf/httpd.conf: Cannot load modules/mod_sapcs22.so into
server: /directory/apache/modules/mod_sapcs22.so: undefined symbol: ap_log_error
Can you help me?
Thanks

Hi Reagan,
Execute the first parameter,
rgqaserp:(/sapcontreps/apache/modules)(root)#cat /sapcontreps/apache/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/sapcontreps/apache"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:logs
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 1090
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule sapcs_module modules/mod_sapcs22.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
#LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
LoadModule mime_module modules/mod_mime.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule info_module modules/mod_info.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User daemon
Group daemon
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
 AllowOverride none
 Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/sapcontreps/apache/htdocs"
<Directory "/sapcontreps/apache/htdocs">
 # Possible values for the Options directive are "None", "All",
 # or any combination of:
 # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
 # Note that "MultiViews" must be named *explicitly* --- "Options All"
 # doesn't give it to you.
 # The Options directive is both complicated and important. Please see
 # http://httpd.apache.org/docs/2.4/mod/core.html#options
 # for more information.
 Options Indexes FollowSymLinks
 # AllowOverride controls what directives may be placed in .htaccess files.
 # It can be "All", "None", or any combination of the keywords:
 # AllowOverride FileInfo AuthConfig Limit
 AllowOverride None
 # Controls who can get stuff from this server.
 Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
 DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
 Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "logs/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
 # The following directives define some format nicknames for use with
 # a CustomLog directive (see below).
 LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
 LogFormat "%h %l %u %t \"%r\" %>s %b" common
 <IfModule logio_module>
 # You need to enable mod_logio.c to use %I and %O
 LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
 </IfModule>
 # The location and format of the access logfile (Common Logfile Format).
 # If you do not define any access logfiles within a <VirtualHost>
 # container, they will be logged here. Contrariwise, if you *do*
 # define per-<VirtualHost> access logfiles, transactions will be
 # logged therein and *not* in this file.
 CustomLog "logs/access_log" common
 # If you prefer a logfile with access, agent, and referer information
 # (Combined Logfile Format) you can use the following directive.
 #CustomLog "logs/access_log" combined
</IfModule>
<IfModule alias_module>
 # Redirect: Allows you to tell clients about documents that used to
 # exist in your server's namespace, but do not anymore. The client
 # will make a new request for the document at its new location.
 # Example:
 # Redirect permanent /foo http://www.example.com/bar
 # Alias: Maps web paths into filesystem paths and is used to
 # access content that does not live under the DocumentRoot.
 # Example:
 # Alias /webpath /full/filesystem/path
 # If you include a trailing / on /webpath then the server will
 # require it to be present in the URL. You will also likely
 # need to provide a <Directory> section to allow access to
 # the filesystem path.
 # ScriptAlias: This controls which directories contain server scripts.
 # ScriptAliases are essentially the same as Aliases, except that
 # documents in the target directory are treated as applications and
 # run by the server when requested rather than as documents sent to the
 # client. The same rules about trailing "/" apply to ScriptAlias
 # directives as to Alias.
 ScriptAlias /cgi-bin/ "/sapcontreps/apache/cgi-bin/"
</IfModule>
<IfModule cgid_module>
 # ScriptSock: On threaded servers, designate the path to the UNIX
 # socket used to communicate with the CGI daemon of mod_cgid.
 #Scriptsock cgisock
</IfModule>
# "/sapcontreps/apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/sapcontreps/apache/cgi-bin">
 AllowOverride None
 Options None
 Require all granted
</Directory>
<IfModule mime_module>
 # TypesConfig points to the file containing the list of mappings from
 # filename extension to MIME-type.
 TypesConfig conf/mime.types
 # AddType allows you to add to or override the MIME configuration
 # file specified in TypesConfig for specific file types.
 #AddType application/x-gzip .tgz
 # AddEncoding allows you to have certain browsers uncompress
 # information on the fly. Note: Not all browsers support this.
 #AddEncoding x-compress .Z
 #AddEncoding x-gzip .gz .tgz
 # If the AddEncoding directives above are commented-out, then you
 # probably should define those extensions to indicate media types:
 AddType application/x-compress .Z
 AddType application/x-gzip .gz .tgz
 # AddHandler allows you to map certain file extensions to "handlers":
 # actions unrelated to filetype. These can be either built into the server
 # or added with the Action directive (see below)
 # To use CGI scripts outside of ScriptAliased directories:
 # (You will also need to add "ExecCGI" to the "Options" directive.)
 #AddHandler cgi-script .cgi
 # For type maps (negotiated resources):
 #AddHandler type-map var
 # Filters allow you to process content before it is sent to the client.
 # To parse .shtml files for server-side includes (SSI):
 # (You will also need to add "Includes" to the "Options" directive.)
 #AddType text/html .shtml
 #AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
<IfModule mod_sapcs.cpp>
AddModuleInfo ContentServer "SAP Content Server 640/0 (Prototype) (C) SAP AG 1998, 2001"
CSConfigPath /sapcontreps/conf/cs.conf
<Location /sapcs>
SetHandler sapcs_module
Allow from all
</Location>
<Location /ContentServer/ContentServer.dll>
SetHandler sapcs_module
Allow from all
</Location>
<Location /contentserver/contentserver.dll>
SetHandler sapcs_module
Allow from all
</Location>
</IfModule>
Second parameter,
rgdeverp:(/sapcontreps/apache/modules)(root)#ls -la /sapcontreps/apache/modules
total 5544
drwxrwxrwx 2 sapcs sapsys 4096 Jun 12 15:46 .
drwxrwxrwx 15 sapcs sapsys 4096 Jun 12 14:56 ..
-rwxrwxrwx 1 sapcs sapsys 13836 Jun 12 14:54 httpd.exp
lrwxrwxrwx 1 sapcs sapsys 34 Jun 12 15:46 libsapsecu.so -> /sapcontreps/modules/libsapsecu.so
-rwxrwxrwx 1 sapcs sapsys 34756 Jun 12 14:56 mod_access_compat.so
-rwxrwxrwx 1 sapcs sapsys 31861 Jun 12 14:56 mod_actions.so
-rwxrwxrwx 1 sapcs sapsys 44418 Jun 12 14:56 mod_alias.so
-rwxrwxrwx 1 sapcs sapsys 30426 Jun 12 14:56 mod_allowmethods.so
-rwxrwxrwx 1 sapcs sapsys 41605 Jun 12 14:56 mod_auth_basic.so
-rwxrwxrwx 1 sapcs sapsys 84126 Jun 12 14:56 mod_auth_digest.so
-rwxrwxrwx 1 sapcs sapsys 68399 Jun 12 14:56 mod_auth_form.so
-rwxrwxrwx 1 sapcs sapsys 30531 Jun 12 14:56 mod_authn_anon.so
-rwxrwxrwx 1 sapcs sapsys 36079 Jun 12 14:56 mod_authn_core.so
-rwxrwxrwx 1 sapcs sapsys 40100 Jun 12 14:56 mod_authn_dbd.so
-rwxrwxrwx 1 sapcs sapsys 32532 Jun 12 14:56 mod_authn_dbm.so
-rwxrwxrwx 1 sapcs sapsys 32359 Jun 12 14:56 mod_authn_file.so
-rwxrwxrwx 1 sapcs sapsys 49757 Jun 12 14:56 mod_authn_socache.so
-rwxrwxrwx 1 sapcs sapsys 61854 Jun 12 14:56 mod_authz_core.so
-rwxrwxrwx 1 sapcs sapsys 42581 Jun 12 14:56 mod_authz_dbd.so
-rwxrwxrwx 1 sapcs sapsys 35071 Jun 12 14:56 mod_authz_dbm.so
-rwxrwxrwx 1 sapcs sapsys 34704 Jun 12 14:56 mod_authz_groupfile.so
-rwxrwxrwx 1 sapcs sapsys 35256 Jun 12 14:56 mod_authz_host.so
-rwxrwxrwx 1 sapcs sapsys 30435 Jun 12 14:56 mod_authz_owner.so
-rwxrwxrwx 1 sapcs sapsys 30802 Jun 12 14:56 mod_authz_user.so
-rwxrwxrwx 1 sapcs sapsys 105072 Jun 12 14:56 mod_autoindex.so
-rwxrwxrwx 1 sapcs sapsys 34253 Jun 12 14:56 mod_buffer.so
-rwxrwxrwx 1 sapcs sapsys 192292 Jun 12 14:56 mod_cache.so
-rwxrwxrwx 1 sapcs sapsys 84567 Jun 12 14:56 mod_cache_disk.so
-rwxrwxrwx 1 sapcs sapsys 88616 Jun 12 14:56 mod_cache_socache.so
-rwxrwxrwx 1 sapcs sapsys 98717 Jun 12 14:56 mod_cgid.so
-rwxrwxrwx 1 sapcs sapsys 354271 Jun 12 14:56 mod_dav.so
-rwxrwxrwx 1 sapcs sapsys 189761 Jun 12 14:56 mod_dav_fs.so
-rwxrwxrwx 1 sapcs sapsys 59275 Jun 12 14:56 mod_dbd.so
-rwxrwxrwx 1 sapcs sapsys 35504 Jun 12 14:56 mod_dir.so
-rwxrwxrwx 1 sapcs sapsys 33559 Jun 12 14:56 mod_dumpio.so
-rwxrwxrwx 1 sapcs sapsys 31544 Jun 12 14:56 mod_env.so
-rwxrwxrwx 1 sapcs sapsys 40037 Jun 12 14:56 mod_expires.so
-rwxrwxrwx 1 sapcs sapsys 63988 Jun 12 14:56 mod_ext_filter.so
-rwxrwxrwx 1 sapcs sapsys 39211 Jun 12 14:56 mod_file_cache.so
-rwxrwxrwx 1 sapcs sapsys 52811 Jun 12 14:56 mod_filter.so
-rwxrwxrwx 1 sapcs sapsys 60936 Jun 12 14:56 mod_headers.so
-rwxrwxrwx 1 sapcs sapsys 158790 Jun 12 14:56 mod_include.so
-rwxrwxrwx 1 sapcs sapsys 66838 Jun 12 14:56 mod_info.so
-rwxrwxrwx 1 sapcs sapsys 36196 Jun 12 14:56 mod_lbmethod_bybusyness.so
-rwxrwxrwx 1 sapcs sapsys 36188 Jun 12 14:56 mod_lbmethod_byrequests.so
-rwxrwxrwx 1 sapcs sapsys 36192 Jun 12 14:56 mod_lbmethod_bytraffic.so
-rwxrwxrwx 1 sapcs sapsys 48496 Jun 12 14:56 mod_lbmethod_heartbeat.so
-rwxrwxrwx 1 sapcs sapsys 86665 Jun 12 14:56 mod_log_config.so
-rwxrwxrwx 1 sapcs sapsys 40163 Jun 12 14:56 mod_log_debug.so
-rwxrwxrwx 1 sapcs sapsys 31797 Jun 12 14:56 mod_logio.so
-rwxrwxrwx 1 sapcs sapsys 48254 Jun 12 14:56 mod_macro.so
-rwxrwxrwx 1 sapcs sapsys 54195 Jun 12 14:56 mod_mime.so
-rwxrwxrwx 1 sapcs sapsys 106526 Jun 12 14:56 mod_negotiation.so
-rwxrwxrwx 1 sapcs sapsys 291551 Jun 12 14:56 mod_proxy.so
-rwxrwxrwx 1 sapcs sapsys 171766 Jun 12 14:56 mod_proxy_ajp.so
-rwxrwxrwx 1 sapcs sapsys 108144 Jun 12 14:56 mod_proxy_balancer.so
-rwxrwxrwx 1 sapcs sapsys 54249 Jun 12 14:56 mod_proxy_connect.so
-rwxrwxrwx 1 sapcs sapsys 38536 Jun 12 14:56 mod_proxy_express.so
-rwxrwxrwx 1 sapcs sapsys 61607 Jun 12 14:56 mod_proxy_fcgi.so
-rwxrwxrwx 1 sapcs sapsys 112538 Jun 12 14:56 mod_proxy_ftp.so
-rwxrwxrwx 1 sapcs sapsys 114424 Jun 12 14:56 mod_proxy_http.so
-rwxrwxrwx 1 sapcs sapsys 56400 Jun 12 14:56 mod_proxy_scgi.so
-rwxrwxrwx 1 sapcs sapsys 55514 Jun 12 14:56 mod_proxy_wstunnel.so
-rwxrwxrwx 1 sapcs sapsys 32760 Jun 12 14:56 mod_ratelimit.so
-rwxrwxrwx 1 sapcs sapsys 40376 Jun 12 14:56 mod_remoteip.so
-rwxrwxrwx 1 sapcs sapsys 45091 Jun 12 14:56 mod_reqtimeout.so
-rwxrwxrwx 1 sapcs sapsys 37224 Jun 12 14:56 mod_request.so
-rwxrwxrwx 1 sapcs sapsys 171049 Jun 12 14:56 mod_rewrite.so
lrwxrwxrwx 1 sapcs sapsys 35 Jun 12 15:46 mod_sapcs22.so -> /sapcontreps/modules/mod_sapcs22.so
-rwxrwxrwx 1 sapcs sapsys 119242 Jun 12 14:56 mod_sed.so
-rwxrwxrwx 1 sapcs sapsys 57944 Jun 12 14:56 mod_session.so
-rwxrwxrwx 1 sapcs sapsys 32806 Jun 12 14:56 mod_session_cookie.so
-rwxrwxrwx 1 sapcs sapsys 47023 Jun 12 14:56 mod_session_dbd.so
-rwxrwxrwx 1 sapcs sapsys 44102 Jun 12 14:56 mod_setenvif.so
-rwxrwxrwx 1 sapcs sapsys 53976 Jun 12 14:56 mod_slotmem_shm.so
-rwxrwxrwx 1 sapcs sapsys 45214 Jun 12 14:56 mod_socache_dbm.so
-rwxrwxrwx 1 sapcs sapsys 35686 Jun 12 14:56 mod_socache_memcache.so
-rwxrwxrwx 1 sapcs sapsys 68519 Jun 12 14:56 mod_socache_shmcb.so
-rwxrwxrwx 1 sapcs sapsys 39669 Jun 12 14:56 mod_speling.so
-rwxrwxrwx 1 sapcs sapsys 63924 Jun 12 14:56 mod_status.so
-rwxrwxrwx 1 sapcs sapsys 43320 Jun 12 14:56 mod_substitute.so
-rwxrwxrwx 1 sapcs sapsys 33237 Jun 12 14:56 mod_unique_id.so
-rwxrwxrwx 1 sapcs sapsys 33466 Jun 12 14:56 mod_unixd.so
-rwxrwxrwx 1 sapcs sapsys 33615 Jun 12 14:56 mod_userdir.so
-rwxrwxrwx 1 sapcs sapsys 25961 Jun 12 14:56 mod_version.so
-rwxrwxrwx 1 sapcs sapsys 37707 Jun 12 14:56 mod_vhost_alias.so
But when stop or stat I have the error,
rgqaserp:(/sapcontreps/apache/bin)(root)#./apachectl start
httpd: Syntax error on line 66 of /sapcontreps/apache/conf/httpd.conf: Cannot load modules/mod_sapcs22.so into server: /sapcontreps/apache/modules/mod_sapcs22.so: ELF file data encoding not little-endian
Can you help me?
Thanks

Error While defining the content server

Dear Folks,
We are trying to define the content sever in our sever. It is required for integration of SAP with documentum. We are trying to define in below path.
Cross-Application Components - Document Management - General data - Settings for storage systems - Maintain storage system -
It already have DMS_C1 content repository with storage type R/3 database. We are creating a new content repository with storage type HTTP Content Server. We are giving below inputs.
Vesion No. 0045, HTTP Server - (My machine's FQDN and port is 8080), HTTP script as - sap/bc/contentsever/300.
After giving above inputs, if I click on test connection, I m getting error as Error in HTTP Access:IF_HTTP_CLIENT -> RECIEVE1 ICM_HTTP_CONNECTION_FAILED.
If I define the HTTP content sever as sap-qas.vsnl.co.in (i.e. My quality servers host name) it works fine i.e. connection test goes OK. Does any one know how we can define the content server and what all steps required for the same?
Thanks and Regards,
Kedar

Hi Kedar,
YOu have to provide the details as fallows
Storage type : HTTP content server
Version no. : 45 (based on the content server version)
HTTP server : <content server IP>
Port Number of content server : 1090 (default port)
HTTP Scrip : ContentServer/ContentServer.dll
Once after these details you can check
Also install the DBM gui in your local PC and add this content servers database (if the content server is on MAX DB) then you need to star it from the console or else use the command to start it once after the installation.
/sapdb/programs/bin/dbmcli -d <SID> -u control,plmcont db_state - to check the database status
/sapdb/programs/bin/dbmcli -d <SID> -u control,plmcont db_online - to start the database
Thanks,
Chaitanya

Error in Starting DMS(Content Server)

Dear all,
I get the following error while starting the Content server on unix.
i am unbale to start the server , pls assist.
$ pwd
/home/sapcs/bin
$ apachectl start
ld.so.1: httpd: fatal: libucb.so.1: open failed: No such file or directory
Killed
$
Regards,
Irfan

That simply sounds like the PATH for libucb.so.1 is not maintained in your env variables.
That should fix the problem
Regards
Juan

Error on update of document stored in content server

Error on update of document stored in content server
On a regular basis (but not reproducible) we find that after updating a document, it is deleted from content server (or at least it cannot be retrieved). These problems have only been experienced since we switched to using content server as our storage repository, as opposed to R/3.
We create and maintain documents through a bespoke transaction, which calls standard SAP functions BDS_BUSINESSDOCUMENT_CREA_TAB and cl_bds_document_set=>update_with_table.
Whilst the errored documents are listed in the BDS via transaction OAOR (business document navigator), an error is received when you try to display it (in our case an MS-Word error indicating file/pathname invalid).
We are satisfied that file/pathname are valid and find that this occurs occasionally when a document has been updated. It appears that the document has been deleted.
This bespoke transaction has been running successfully for almost two years, and these problems have only been experienced after switching to content server as a storage repository (as opposed to R3 previously). Has anyone else experienced these problems?
We are running :
R/3 Enterprise 620,
SAP HTTP Content Server Version 6.30 Patch 13
SAPDB version 7.3.0.54

Hi Sonny,
To check the connectivity between your content server and Workstation and SAP Server.
Pls goto the command prompt of your workstation
give the command like this example.
C:\>Ping 117.123.45.201
you will get the reply from the server. here 117.123.45.201 is your content server IP.
If you are getting the reply then it means that your contentserver and workstation are connected propely.
Like that pls check the connectivity between your systems.
Pls check the hosts file of your systems also.
If the hosts file entry is not maintained, you can check-out file from content server but you cannot check-in the original.
Pls let me know what kind of error Message you are getting?
From where you are trying to check-in the Original? From the DIR screen or from CAD Desktop screen?
Regards,
MRK
(reward points if useful)

Content server 404 auth error

Similar Messages

Maybe you are looking for