Content server - config?

Dear all,
I am working on DMS with Content server.
Particullarly now in CONTENT server CONFIG.
Any one could kindly help me out with the procedure and documents.
Regards,
John.

Dear Ronald,
Just now saw your reply.Thanx for the care.
I was working in a different location for past 2 days so i couldn't see the mail.
Actually v r trying to shift our db to SAP.And we r using DMS(Document Management System) and using webdocuments a BSP for interaction with database(Content server.)
So v want to push up our data into HTTP enabled CONTENT SERVER.For this i need help on Cofig. of content server.
Awaiting your reply.
Thanx & regards,
John wesley.

Similar Messages

Content Server config for production system - oac0

Hi all
We are setting up content server for our ERP 2005 system, and I am wondering what best practice is for our scenario.
We have one content server (CST) for development and test systems on host A, and one content server (CSP) for production system on host B. The Archive link configuration in dev and test points to CST. When this is transported to production, it will point to the wrong content server and I will have to reconfigure the archivelink in production to point to the correct content server (CSP).
What is the best way to set up the production system to point to the content server CSP on host B? Should I define a new content repository in t-code oac0 in dev, and transport this to production? Should I define the new repository directly in production system??
Please advise.
Best Regards,
Thomas

Hello,
I had the same problem a few years ago with R/3 4.7.
I don't think there is a perfect solution but here is what I did :
In the DEV system, in OAC0, I created 2 content repositories, one for the test sytem and one for the production. I transported these 2 content repositories in the production system.
In the DEV system, in OAC3, I created temporary links from my business objects to my production content repository. I released the request order.
Then I deleted these links which are wrong in the DEV system. I transported the order in the R/3 production system where these links are right.
In the DEV system, in OAC3, I then created the links from my business objects to my TEST content repository. I released the second request order.
So my config is now OK in my test and my production system.
When we refresh the DEV system by a database copy from the production system. We just have to reimport the test request order to switch the links to be OK on the DEV system. We don't have to recreate the test content repository as it was defined als oi nthe production system.
I am not sure that this is clear but this works for us with no problems since 2002.
I hope this helps.
Olivier

Content server Config? in DMS

I am receiving a error in config. of content server.
While creating repositories,it says
HTTP error 401 unauthorised.
Also what is the certificate means in CSADMIN,Does it necessary for creating the Reposiotry.
Help me come out of this.
Regards,
John.

Hello,
You have the wrong permission on the file ContentServer.ini in the path C:\Program Files\SAP\Content Server
Provide enough rights and it should be ok.
About the certificate, you don't need it for the creation of a content repository
Regards

Content server config - error?

While creating content repository in OAC0,after filling all necessary fileds and trying to send the certificate,the below mentioned error occurs.
Error in HTTP access : If_HTTP_client>receive 1
ICM_HTTP_CONNECTION_FAILED.
Help me how to rectify...
Regards,
John.

Hi John,
if you don't see any errors around the same point in time in the MaxDB / SAP DB files dbm.prt and/or knldiag.err (both found in the Rundirectory, normally <drive>\sapdb\data\wrk\<SID> on Windows systems), then it's very probably not a MaxDB / SAP DB issue, but a general Content Server issue. In that case, this forum (MaxDB/liveCache) would be the wrong one.
So, please let me know if you find something in the mentioned files.
Regards,
Roland

Setting content server for storing PPM documents

Hi Folks,
We have followed the steps outlined the PPM config doc for setting up the content server (pages 117). Summary of the steps are shown below. (We are on PPM5.0)
Creating a Content Server Entry
1. In Customizing for SAP NetWeaver under Application Server Basis Services
Knowledge Provider Content Management Service Define Content
Repositories , choose Content Repository Display/Change .
2. Choose Content Repository Create .
3. Enter a name and a description for the content server.
4. Enter CFF in the Document Area field and HTTP in the Storage Type field.
Creating a Storage Category for a Repository
1. In Customizing for SAP NetWeaver under Application Server Basis Services
Knowledge Provider Content Management Service Define Content Categories
, choose New entries.
2. Enter a name and description, and then enter CFF in the Document Area field.
3. Enter the name of the newly-created content repository in the Content Repository
field.
Setting the new Content Server as the Default Storage Category
1. Choose transaction DMWB.
2. Choose model area CFF in the tree.
3. Navigate to PHIO-classes, node CFF_VERSION_V.
4. Change the standard attribute STORAGE_CATEGORY from CFFCONTENT to the
category you have defined above.
5. Repeat this for node CFF_ADD_FILES_V and for CFF_VERS in node
CFF_VERSION_V.
After doing the above steps I did the following tests.
1. Tried to access documents stored at the portfolio item level before doing the above content server config. I was able to access the documents which leads me to believe that files are still getting stored in the DB.
2. Checked the table CFF_CONT before and after storing a 1kb file and the number of entries increased by 2, which again leads me to believe the file is not stored in the content server.
Appreciate any input on whether we have followed the correct steps and if there is a better way check if files are actually being stored in the content server.
Thanks,
Lashan
Edited by: Lashan Wanigatunga on Apr 28, 2011 7:08 AM

Hi Lashan,
I didn't same steps as you explain in your first post but it isn't working.
Why didn't it work for you when you posted your 1st post, and now is is working? Is there some installation or Add-on that we need you have? Is there any Basis system parameters that we need to put?
thanks in advance,
aupalaura

SAP Content Server configuration CSADMIN username password

Hi all.
I am having problems when I try to configure SAP Content Server 6.40 after installation. When I try to run csadmin to set up the content repository, I constantly get this login prompt. I have tried using the default SAPR3 user and password, but I only get access denied. The SAPR3 user exists on my MaxDB 7.6. I have also tried setting AdminSecurity=0 in the ContentServer.ini file, and the login prompt is still displayed.
Does anyone have any idea on what username and password I should use, so that I can try to complete the Content Server config? Also, if you know of any decent guidelines for the content repository configuration, I'd be happy if you provide me with some documentation..
Thanks!
Regards,
Thomas

Dear Natalia,
Thank you for your reponse.
During installation I went with the defaults for all users.
The results of the commands you wanted me to run are as follows:
dbmcli on <SID>>dbm_version
OK
VERSION = 7.6.00
BUILD = DBMServer 7.6.00 Build 035-123-139-084
OS = WIN32
INSTROOT = D:\sapdb\CST\db
LOGON = True
CODE = UTF8
SWAP = full
UNICODE = YES
INSTANCE = OLTP
SYSNAME = Windows Server 2003 family
dbmcli on <SID>>user_getall
OK
CONTROL
SUPERDBA
dbmcli on <SID>>user_get <username>
dbmcli on CST>user_get CONTROL
OK
SERVERRIGHTS=DBInfoRead,SystemCmd,ExecLoad,UserMgm,DBFileRead,Backup,InstallMgm,
LoadSysTab,ParamCheckWrite,ParamFull,ParamRead,DBStart,DBStop,Recovery,AccessSQL
,AccessUtility,SharedMemoryMgm,SchedulerMgm,Scheduling,EvtDispMgm,EvtDisp
GUIRIGHTS=
SECONDPASSWORD=NO
DISABLED=NO
COMMENT=
USERTYPE=DBM
dbmcli on CST>user_get SUPERDBA
OK
SERVERRIGHTS=DBInfoRead,SystemCmd,ExecLoad,UserMgm,DBFileRead,Backup,InstallMgm,
LoadSysTab,ParamCheckWrite,ParamFull,ParamRead,DBStart,DBStop,Recovery,AccessSQL
,AccessUtility,SharedMemoryMgm,SchedulerMgm,Scheduling,EvtDispMgm,EvtDisp
GUIRIGHTS=
SECONDPASSWORD=NO
DISABLED=NO
COMMENT=
USERTYPE=DBA
dbmcli on CST>sql_execute select * from users
OK
END
'CONTROL';'';'CONTROL';'ADMIN';'MULTIPLE';(null);(null);(null);'DEFAULT';'200706
29';'00133012';'20070629';'00133012';'20070629';'00133012';'CST';'sapcsd.norkom'
;0;'NO';(null)
'SUPERDBA';'';'SUPERDBA';'SYSDBA';'MULTIPLE';(null);(null);(null);'DEFAULT';'200
70629';'00133012';'20070629';'00133016';'20070629';'00133012';'CST';'sapcsd.nork
om';10;'NO';(null)
'SUPERDBA';'';'SAPR3';'DBA';'MULTIPLE';(null);(null);(null);'ASCII';'20070629';'
00133027';'20070629';'00164307';'20070629';'00164308';'CST';'sapcsd.norkom';28;'
NO';(null)
dbmcli on <SID>>sql_connect superdba,<password>
OK
dbmcli on CST>sql_execute select * from users
OK
END
'CONTROL';'';'CONTROL';'ADMIN';'MULTIPLE';(null);(null);(null);'DEFAULT';'200706
29';'00133012';'20070629';'00133012';'20070629';'00133012';'CST';'sapcsd.norkom'
;0;'NO';(null)
'SUPERDBA';'';'SUPERDBA';'SYSDBA';'MULTIPLE';(null);(null);(null);'DEFAULT';'200
70629';'00133012';'20070629';'00133016';'20070629';'00133012';'CST';'sapcsd.nork
om';10;'NO';(null)
'SUPERDBA';'';'SAPR3';'DBA';'MULTIPLE';(null);(null);(null);'ASCII';'20070629';'
00133027';'20070629';'00164307';'20070629';'00164308';'CST';'sapcsd.norkom';28;'
NO';(null)
dbmcli on <SID>>sql_release
OK
dbmcli on <SID>>sql_connect sapr3,<password>
OK
dbmcli on <SID>>sql_release
OK
dbmcli on <SID>>exit
OK
I hope you are able to read something useful out of this.
Best Regards,
Thomas

How to install new instance on Stellent Content Server

Hi All,
I have installed Stellent Admin Server and Content Server with the instance name "idc".
Now I want to install one more content server "idc1" on same Admin server.
So is there any appropriate way to do this?
Please let me know.
Thanks & Regards,
Vishal Shah

Hi
You can do it but there is one very critical exception to do it depending on the Webserver that you are using :
1. Is you are using Sunone Webserver then you cannot install multiple instances of CS on the same webserver instance.
And if using IIS then the only thing that you need to do on the webserver front is to restart the Webserver after the second instance is installed so that the webserver picks up the config entries made for the second instance's install.
With Apache webserver you will have make the entry in the httpd.conf for the second instance as you had done for the first instance
Eg for this is :
This is my first instance:
LoadModule IdcApacheAuth "D:/oracle/ucm/cs2/shared/os/win32/lib/IdcApache22Auth.dll"
IdcUserDB cs2 "D:/oracle/ucm/cs2/data/users/userdb.txt"
Alias /cs2 "D:/oracle/ucm/cs2/weblayout"
<Location /cs2>
 Allow from all
 Order allow,deny
 DirectoryIndex portal.htm
 IdcSecurity cs2
</Location>
This is my second instance:
LoadModule IdcApacheAuth D:/oracle/ucm/idc1/shared/os/win32/lib/IdcApache22Auth.dll
IdcUserDB idc1 "D:/oracle/ucm/idc1/data/users/userdb.txt"
Alias /idc1 "D:/oracle/ucm/idc1/weblayout"
<Location /idc1>
Order allow,deny
Allow from all
DirectoryIndex portal.htm
IdcSecurity idc1
</Location>
Hope this helps
Thanks
Srinath

SAP Content Server 6.40 on Windows 2003, IIS 6, filesystem storage

Hello:
We have installed SAP Content Sever 6.40 on Windows Server 2003, IIS 6, and using the filesystem as storage, not SAPDB.
The installation goes without any issues and completes successfully, but the test URL http://<host>:<port>/ContentServer/ContentServer.dll?serverInfo returns "The page cannot be displayed" and not the expected system info/status. We need to fix this before moving on to config in ERP, any suggestions into Content Server or IIS settings/configuration is appreciated.
We're using the standard install port 1090, and testing from a browser in the same host.
Regards,
Eduardo

Additional information:
Looking in the event viewer under application, I see the following 2 errors:
1) The HTTP Filter DLL D:\Program Files\SAP\Content Server\ContentServer.dll failed to load. The data is the error.
Data: 0000: 0000007f
2) Could not load all ISAPI filters for site/service. Therefore startup aborted.
Regards,
Eduardo

URL for data store in content Server

Dear Experts,
I m using this content server to connect with the Portal 7.0, as I m working with LSO and my content server is working fine as below....
serverType="SAP HTTP Content Server";serverVendorId="Copyright SAP AG, All rights reserved 1998, 2001";serverVersion="6400";serverPatch="1";serverBuild="190";pVersion="0046";serverStatus="running";serverStatusDescription="";serverDate="2009-02-05";serverTime="10:47:29";startUpDate="2009-02-05";startUpTime="10:40:34";lastAccessDate="2009-02-05";lastAccessTime="10:41:40";
contRep="ZADGAS_LSO";contRepStatus="defined";contRepStatusDescription="";contRepDescription="Content Server for LSO";contentStorageHost="xxx-xxx-cont";contentStorageName="LSO";secKeyVerification="y";defaultDocProt="";
Now, I want to connect Portal and content server with the URL...for data storage in the content server.
I m trying to use this URL, but is is not working...
http://xxx-xxx-cont:1090/ConTentServer/ContentServer.dll?adminContRep&operation=docIdList&contRep=ZADGAS_LSO
Can you please let me know what is the issue or should I make some configuration to this and please send the config documents to me ...at
email address removed
Thanks in advance.
Ahmad
Edited by: Michael Nicholls on Feb 5, 2009 10:29 PM

Dear All,
I want to connect SAP content server through Authrouing Environment for uploading the data in the content server.
I want to use content server as WEBDAV REPOSITORY for access the docs.
I think ... shared drive thing would work...only if the repository is created in the file systems isnt it?
I m not sure about it
Any help will be appreciated .
Thanks,
Ahmad

Inbound Adapter / 'Sink' failing for Content Server on Subscription Client

I am running into an issue in configuring the Outbound - Inbound Adapters for Connection Server / Subscription Client against Content Server. The details are below. Would sincerely appreciate if anyone can help with this.
I have installed a Oracle UCM setup together with two Content Server instances (Contribution instance and Live instance), a Connection Server and a Subscription Client - all within the same virtual machine on top of Windows XP SP2 OS and Oracle 10g Database.
I have further configured the Outbound Adapter on the Connection Server and the Inbound Adapter on the Subscription Client. All installation and configuration has been done following the step-by-step process from the relevant installation guides.
We have tested the connectivity between the Connection Server and the Subscription Client for a simple file-based content source and it works fine - i.e., files added to a directory registered as a source on connection server are retrieved and sent to the subscription client and received there successfully / dropped in the specified target client directory.
However, this transfer fails for the Content Server Outbound-Inbound Adapter connectivity. We have an Archive in Content Server registered as a "CNSArchive" and exporting successfully to the CNS Server. The registered outbound adapter is successfully able to receive these updates and are visible through the Connection Server
interface. The subscription client is also apparently able to receive these updates
correctly and writes them to the specified folder/directory on the client;
however fails to "batch load" these and reports a failure writing to the
Content Sink.
What we would like is for the ability to establish end-to-end connectivity between the contribution content server instance and the live content server using the connection server + outbound adapter on the sending end together with the subscription client + inbound adapter together on the receiving end. This is failing.
I have double checked the cns.oracle.config (connection server config), siclone.config (subscription client config), and the source content server's configuration (config.cfg), and all seems to be well. Not really sure therefore what is causing this.
Here is a snippet of the error trace that keeps showing up in the subscription client logs ...
[May 18 21:18:34] VERBOSE: scheduler: waiting to run job ICE Connection in 0:00:33.000 ...
[May 18 21:18:34] VERBOSE: replicator: response: 200 OK for Url:http://192.168.131.65:8891/42/E%3a%2fapps%2foracle%2fucm%2fserver%2fweblayout%2fgroups%2fpublic%2fdocuments%2fucmdocs%2fcpseven.pdf
[May 18 21:18:34] INFO: replicator: opened connection http://192.168.131.65:8891/42/E%3a%2fapps%2foracle%2fucm%2fserver%2fweblayout%2fgroups%2fpublic%2fdocuments%2fucmdocs%2fcpseven.pdf in 0:00:00.130
[May 18 21:18:34] ERROR: replicator: ContentSink reported failure to add item.
[May 18 21:18:34] ERROR: replicator: Telling all sinks to rollback changes
[May 18 21:18:34] ERROR: replicator: crawl failed
[May 18 21:18:34] VERBOSE: scheduler: job completed:ICE Request: 43

Don't know if anyone is still having problems with this, but just in case...
I was getting a similar error. I had an Event Viewer record (It wasn't a Warning or an Error, just an Information) reading:You are running a version of Microsoft SQL Server 2000 or Microsoft SQL Server 2000 Desktop Engine (also called MSDE) that has known security vulnerabilities when used in conjunction with this version of Windows. To reduce your computer's vulnerability to certain virus attacks, the TCP/IP and UDP network ports of Microsoft SQL Server 2000, MSDE, or both have been disabled. To enable these ports, you must install a patch, or the most recent service pack for Microsoft SQL Server 2000 or MSDE from http://www.microsoft.com/sql/downloads/default.asp
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I installed SQL SP4 and it corrected the problem

Lauch archiver for content server not working

Hello All,
we have running content server 11gr1 on one box and need to migrate all its strunture and content to newly installed box. (same db + app version is installed here)
for 'meta data migration" I have done it through 'Content Migration Utility’.
Now I have to 'migrate content using archiver'
when I logged into console
Go to ‘Administration ->Admin Applets’. Then click on ‘Archiver’
getting below error:
basic: Exception: java.lang.ClassNotFoundException: IntradocApp.class
network: Cache entry not found [url: http://test.oracle.net:16200/cs/common/IntradocApp.class, version: null]
network: Connecting http://test.oracle.net:16200/cs/common/IntradocApp.class with proxy=DIRECT
network: Cache entry not found [url: http://test.oracle.net:16200/cs/common/IntradocApp/class.class, version: null]
network: Connecting http://test.oracle.net:16200/cs/common/IntradocApp/class.class with proxy=DIRECT
load: class IntradocApp.class not found.
java.lang.ClassNotFoundException: IntradocApp.class
    at sun.applet.AppletClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadCode(Unknown Source)
    at sun.applet.AppletPanel.createApplet(Unknown Source)
    at sun.plugin.AppletViewer.createApplet(Unknown Source)
    at sun.applet.AppletPanel.runLoader(Unknown Source)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
basic: Exception: java.lang.ClassNotFoundException: IntradocApp.class
Please suggest for the same.
Thanks in ADV.

Are you really in the domain home ??
With the bin directory (under cs), you shoud see custom, classes, config, etc. directories.
......APPLS\MW\user_projects\domains\YOUR_DOMAIN\ucm\cs
You need to export your data on the source server and then do the import on the target server.
You could have a look on the documentation : http://docs.oracle.com/cd/E21764_01/doc.1111/e10792/c06_migration.htm
Romain.

Content Server and Portal Connectivity

Dear Experts,
I m using this content server to connect with the Portal 7.0, as I m working with LSO and my content server is working fine as below....
serverType="SAP HTTP Content Server";serverVendorId="Copyright SAP AG, All rights reserved 1998, 2001";serverVersion="6400";serverPatch="1";serverBuild="190";pVersion="0046";serverStatus="running";serverStatusDescription="";serverDate="2009-02-05";serverTime="10:47:29";startUpDate="2009-02-05";startUpTime="10:40:34";lastAccessDate="2009-02-05";lastAccessTime="10:41:40";
contRep="ZADGAS_LSO";contRepStatus="defined";contRepStatusDescription="";contRepDescription="Content Server for LSO";contentStorageHost="xxx-xxx-cont";contentStorageName="LSO";secKeyVerification="y";defaultDocProt="";
Now, I want to connect Portal and content server with the URL...for data storage in the content server.
I m trying to use this URL, but is is not working...
http://xxx-xxx-cont:1090/ConTentServer/ContentServer.dll?adminContRep&operation=docIdList&contRep=ZADGAS_LSO
Can you please let me know what is the issue or should I make some configuration to this and please send the config documents to me ...at
ahmad.siddiquee at gma!l
Thanks in advance.
Ahmad

Dear All,
I want to connect SAP content server through Authrouing Environment for uploading the data in the content server.
I want to use content server as WEBDAV REPOSITORY for access the docs.
I think ... shared drive thing would work...only if the repository is created in the file systems isnt it?
I m not sure about it
Any help will be appreciated .
Thanks,
Ahmad

External Content server customizing

Hello,
I am trying to configure an external content server for attachment storage on a SRM 4.0 system.
I had a look on both sap Help, SDN forum and config guides, but I didn't find the customizing steps description.
Can anyone help me.
Regards.
Vadim

Hi Vadim
I'm facing the same problem right now.
Do you happen to have some documentation on this that could help me solve the issue ?
Configuration of the archive seems to work, but i'm still missing something in SRM setup because attachments are still in stored in BBPCONT.
Thanks in advance for any information that could help...

Oracle Content Server Security with Web Center Suite

Hi all
I've configured Oracle Content Server (UCM) to integrate with WebCenter Spaces (WCS). The document service works on a user's personal page but fails on group spaces and when I troll the logs I find the following error:
<WCS-07006> <run-time error obtaining content repository oracle.webcenter.doclib.internal.view.DoclibJCRException: repository error
Caused By: javax.jcr.ItemNotFoundException: Unable to get folder info for dCollectionID = 288463355527000401
Caused By: oracle.stellent.ridc.protocol.ServiceException: Unable to display virtual folder information. Cannot read folder.
I am using a socket connection, not web or SSL.
UCM is on an external server and not on the same machine as WCS.
UCM is 11g and WCS 11g patchset 2. Yes I know UCM 11g is not "officially" supported to integrate with WCS until patchset 3, but others have gotten it to work, so I'd like to do the same.
On UCM machine OHS (from web tier utilities) is installed and comfigured.
httpd.conf edited as per requirement.
config.cfg and intradoc.cfg edited as per requirement.
Admin user on UCM has admin and sysmanager rights.
I think this may be because the UCM uses the internal default LDAP first (i.e. it is first on the list of providers) because it does not have an admin user in the external LDAP. So even though in the service connection I specify the UCM admin i think it must also be able to find this user in the external LDAP on the WCS side.
I am currently having trouble figuring out how to give an external LDAP user the same permissions on UCM as that which the default internal LDAP admin user has, so that I can use that external LDAP user in the services connection setup instead.
With WCS under the Fusionware EM is simply added an external LDAP user to the domain for the webcenter section, but for UCM I'm not sure where the appropriate place is to add such a user.
I am also not 100% sure if this is actually the issue.
Any advice will be greatly appreciated!
Thanks!
If it helps:
run-time error obtaining content repository[[
oracle.webcenter.doclib.internal.view.DoclibJCRException: Repository error
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.view.page.editor.webapp.WebCenterComposerFilter.doFilter(WebCenterComposerFilter.java:106)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.share.http.ServletADFFilter.doFilter(ServletADFFilter.java:62)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterLocaleWrapperFilter.processFilters(WebCenterLocaleWrapperFilter.java:288)
at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterLocaleWrapperFilter.doFilter(WebCenterLocaleWrapperFilter.java:177)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.jcr.ItemNotFoundException: Unable to get folder info for dCollectionID = 288463355527000403
at oracle.jcr.impl.ExceptionFactory.itemNotFound(ExceptionFactory.java:587)
at oracle.stellent.jcr.IdcPersistenceManager.getResourceByUUID(IdcPersistenceManager.java:433)
at oracle.jcr.impl.TransientLayer.getResourceByUUID(TransientLayer.java:323)
at oracle.jcr.impl.OracleSessionImpl.getNodeByUUID(OracleSessionImpl.java:279)
at oracle.webcenter.doclib.internal.view.JCRRepositoryLogic.getNode(JCRRepositoryLogic.java:178)
at oracle.webcenter.doclib.internal.view.JCRRepositoryLogic.getItem(JCRRepositoryLogic.java:849)
... 90 more
Caused by: oracle.stellent.ridc.protocol.ServiceException: Unable to display virtual folder information. Cannot read folder.
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:116)
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:92)
at oracle.stellent.jcr.IdcPersistenceManager.getResourceByUUID(IdcPersistenceManager.java:421)
... 94 more

Hi, Thanks for response.
1. I have created default webcenter project application.
2. Created content repository connection using File System..
3. Created new page using default Template.
4. Drag drop Document List Viewer TaskFlow and setup the content server connection.
5. After running the application , i can see list of documents link in page..
6. But When I click on any link ..browser automaically close..
7.On server console I am getting above mentioned error..
I am using jdev 11.1.1.5 and running on internal weblogic server...
Thanks
Naresh

Error executing CIS APIs on content server

Hi I am trying to execute the client samples that came with the CIS jarfiles. All the files are getting terminated with this error..
oracle.stellent.ridc.protocol.ProtocolException:java.io.IOException: Input terminated before being able to read line
the error is in the getResponseAsBinder method call.
I am using eclipse to execute these class files...
Plz let me know if I am missing some imp configurations etc.
Regards
Jo

Hey jogeo,
Are you getting any errors in your content server logs? Or in the Server System Output?
I've seen a similarly vague error from the CIS api's when either my content server wasn't running, the conneciton to the content server db had timed out, or I didn't have my SocketHostAddressSecurityFilter set correctly in config.cfg.
If you could post any errors from the two places I mentioned above we could probably narrow down the issue.
Andy Weaver - Senior Software Consultant
Fishbowl Solutions < http://www.fishbowlsolutions.com?WT.mc_id=L_Oracle_Consulting_amw >

Content server - config?

Similar Messages

Maybe you are looking for