Content Server - Disassociated installation

Hi,
I have done the following installations.
Linux machine1 - Content Server 10gR3
Linux machine2 - Oracle AS 10gR3 with Apache server (using this as web server)
Linux machine3 - Oracle DB 10gr2
In "install_cserver_unix_10en.pdf", under Section F2.2 - Configuring web server system, it states I have to copy "[Instance_Dir]\idcplg", but I don't see this folder in my Content Server installation.
Without completing this particular step, when I try to login to the server, I get the error "The Server is unavailable. Unable to connect to address.".
Is the error related to that particular step or did I miss any other setup?
BTW i followed the instructions provided in install_cserver_unix_10en.pdf for my installation.
Can anyone please point me to a solution?
Thanks
Raji

Check that you are running IdcAdmin and IdcServer on the Linux Machine1.
It appears that idcplg is not needed on solaris installations with sun's webserver.
Message was edited by:
user648097

Similar Messages

Content Server 10gR3 installation problem on Windows 7

Hi,
I just started working on UCM. I tried to install Content Server 10gR3 on my machine with Windows 7 OS. When I try to install, the installation suddenly aborts or hangs until I abort it. Web server (Apache) and DB (Oracle 10g) are running fine.
System has got adequate configuration: Enough Disk space, 2GB RAM and 2 GHz CPU
The same installer worked perfectly on Windows XP Pro 2002 SP2. Can some one reply if UCM 10g is support on Windows 7 ? This, however, is only for learning purpose on my home PC and not for production use.
I also tried running the installer in Windows XP compatible mode. But this didn't help me either. Do, I need to install Win XP to run it or is there any alternative to make it run on Windows 7.
Thank you
Rama

Hi Srinath,
Thanks for your prompt reply. Could you also please let me know if there is any advanced version of UCM (like 11g) that works on Windows 7 - before I go for a windows XP installation.
Thanks again
Rama

Content Server Post Installation

While doing Post Installation of Content Server , Userid& password are asked in csadmin tcode, but "superdba" & "control" are not getting accepted. What is the user id& password to be given in "CSAdmin" tcode.Please convey the procedure for creation of Content Repository & Content Server Configuration and usage.

Hi,
the transaction is asking for an user/password combination for the KW website within the Internet Information Server. It was not asked for the MaxDB users.
First try http://<contentservername>:<1090>/ContentServer/ContentServer.dll?serverInfo as URL. You also will be asked for an username/password. Try a username that exists on the Windows server where the content server is running on, e.g. local administator
Hope that helps.
Frank

Access Content Server Pos-installation Configuration

Hello,
I am new with Oracle ECM, I am starting to use it for Webcenter requirements.
I have installed succesfully Oracle Content Server. I accessed http://localhost:16200/cs, and it showed me the post-installation configurations.
I made some changes and restarted the server. I then realized I had made some mistakes. How can I access the configuration screen again, and make some changes? Thank you.
Joao

Hi
That config screen does not show up a second time .
If you want to make modifications to the configurations then make them in<domain_home>/ucm/cs/config/config.cfg
After the changes are done UCM restart should be done .
Thanks
Srinath

Content Server 640 installation on Windows

Hi
I have installed Content server 640 on windows 2003. IIS is also running.
When i try the following URL, i don't see the content server running:
http://<HOST>:1090/ContentServer/ContentServer.dll?serverInfo
I get the message "The page cannot be displayed"
Can some body help me please...
Thanks
Pavan

Hi Pavan,
Make sure permissions are set as below note (even though is says 6.30 it applies to 6.40) regarding "NETWORK_SERVICE" user.
Note 658442 - SAP Content Server 6.30 on Windows 2003 servers
Also, read
Note 851146 - ODBC driver cannot be loaded on Windows 2003
That most likely will fix the problem
Regards
Juan

Content Server Linux Installation Issue

Hi,
After installing Linux Contentserver and accessing same I am getting following error I am using Apache weserver as part of Oracle application server 10.1.2.0.2.
http://myhost:4444/idc/ ContentServer
http://myhost:4440/idc/ Admin Server
Network message format error. Unable to parse browser environment or content item. Unable to parse properties. Name-value pairs are missing an '='.
Need help to resolve this.
Regards,
Jigar

Hi,
i've setup 10.3.1.0 version of Webserver and also Universal Content Management server's content server.
When i try to load the main page with http://myhostname/idc/, it fails to load but when i login to webserver main page using http://myhostname:7777/, it can load.
Can anyone help me on this?
config.config
<?cfg jcharset="UTF8"?>
#Content Server System Properties
IDC_Name=idc
IdcProductName=idccs
SystemLocale=English-US
InstanceMenuLabel=idc
InstanceDescription=Content Server idc
SocketHostAddressSecurityFilter=192.168.0.20
#Database Variables
JdbcDriver=oracle.jdbc.OracleDriver
JdbcConnectionString=jdbc:oracle:thin:@dell:1521:REPOS
JdbcUser=content
JdbcPassword=OI6UvSF4SfabkpF0YGqKmFvjUz/ZK8elZWd2ZXzfQPY=
JdbcPasswordEncoding=Intradoc
DatabasePreserveCase=1
#Internet Variables
HttpServerAddress=AS1
MailServer=mail
SysAdminAddress=sysadmin@mail
SmtpPort=25
HttpRelativeWebRoot=/idc/
CgiFileName=idcplg
UseSSL=No
WebProxyAdminServer=true
#General Option Variables
EnterpriseSearchAsDefault=0
IsJspServerEnabled=0
JspEnabledGroups=
#Additional Variables
DatabaseType=oracle
SearchIndexerEngineName=DATABASE.METADATA
WebServer=apache
IdcAdminServerPort=4440
IntradocServerPort=4444
httpd.conf
include "/oracle/product/10.1.3.1/Oracle_Web/Apache/Apache/conf/oracle_apache.conf"
LoadModule IdcApacheAuth "/oracle/ucm/server/shared/os/linux/lib/IdcApacheAuth.so"
IdcUserDB idc "/oracle/ucm/server/data/users/userdb.txt"
Alias /idc "/oracle/ucm/server/weblayout"
<Location /idc>
Order allow,deny
Allow from all
DirectoryIndex portal.htm
IdcSecurity idc
</Location>

SAP Content Server

Dear Experts,
I got problem in installing SAP Content Server 6.30 in Solaris 9 (Unix-SPARC 64bit). After discus with OSS they sugest to review the Apache installation, i try to follow the OSS note number 664384, but i confused with some error about the compilation, here is my compilation step :
1. We install gcc for solaris 9 from www.sunfreeware.com
2. In PATH we add PATH=/usr/bin:/opt/sfw/gcc-3/bin
3. run configure --prefix=/home/sapcs --enable-module=most --enable-shared=max
    i got error :
============================================================
    ./helpers/TestCompile: make: not found
++ doing sanity check on compiler and options+
** A test compilation with your Makefile configuration
** failed. The below error output from the compilation
** test will give you an idea what is failing. Note that
** Apache requires an ANSI C Compiler, such as gcc.
======== Error Output for sanity check ========
./helpers/TestCompile: make: not found
============= End of Error Report =============
4. Then we add PATH=/usr/bin:/usr/ccs/bin:/opt/sfw/gcc-3/bin and CFLAGS="-xarch=v9" (note 664384)
================================================
re run ./configure --prefix=/home/sapcs/ --enable-module=most --enable-shared=max
Configuring for Apache, Version 1.3.41
++ using installation path layout: Apache (config.layout)+
Creating Makefile
Creating Configuration.apaci in src
++ enabling mod_so for DSO support+
Creating Makefile in src
++ configured for Solaris 290 platform+
++ setting C compiler to gcc+
++ setting C pre-processor to gcc -E+
++ using "tr [a-z] [A-Z]" to uppercase+
++ checking for system header files+
++ adding selected modules+
    o rewrite_module uses ConfigStart/End
      disabling DBM support for mod_rewrite
      (perhaps you need to add -ldbm, -lndbm or -lgdbm to EXTRA_LIBS)
    o dbm_auth_module uses ConfigStart/End
++ using builtin Expat+
++ checking sizeof various data types+
++ doing sanity check on compiler and options+
** A test compilation with your Makefile configuration
** failed. The below error output from the compilation
** test will give you an idea what is failing. Note that
** Apache requires an ANSI C Compiler, such as gcc.
======== Error Output for sanity check ========
cd ..; gcc -DSOLARIS2=290 -DNO_DBM_REWRITEMAP -DUSE_EXPAT -I./lib/expat-lite -xarch=v9 `./apaci`     -o helpers/dummy helpers/dummy.c   -lsocket -lnsl -lpthread
gcc: language arch=v9 not recognized
ld: fatal: file helpers/dummy.c: unknown file type
ld: fatal: File processing errors. No output written to helpers/dummy
collect2: ld returned 1 exit status
*** Error code 1
make: Fatal error: Command failed for target `dummy'
============= End of Error Report =============
Aborting!
5. I tried to remove the env variable CFLAGS="-xarch=v9", and the result it successfuly installed then i tried to install SAP Content Server 6.30, the installation had been done suceesfully but when i tried to start apache, it can not load the mod_sapcs.so
Syntax error on line 205 of /home_sapcs/conf/httpd.conf:
Cannot load /home_sapcs/libexec/mod_sapcs.so into server: ld.so.1: httpd: fatal: /home_sapcs/libexec/mod_sapcs.so: wrong ELF class: ELFCLASS64
apachectl start: httpd could not be started
Do you have any idea with this problem? I really need advice for this.
Thanks in advance
Bagus

Hello Experts,
Please provide the solution, how the problem was resolved. Even I am getting following error right after installation of Content server when installation prompts to restart the server, when I try to stop apache on Solaris 10, it throws following error:
Syntax error on line 233 of /usr/local/apache2/conf/httpd.conf:
Cannot load /usr/local/apache2/modules/mod_sapcs2.so into server: ld.so.1: httpd: fatal: /usr/local/apache2/modules/mod_sapcs2.so: wrong ELF class: ELFCLASS64
I am facing this issue since very long now.
Please reply at earliest.
Thanks.
Regards,
Kashyap Shah

Installation problem in Oracle Content Server 10g

Hi,
I am trying to install 'ORACLE CONTENT SERVER 10g', as a part of this trying to click on 'Installer.exe' in '/win32'. When i click this installer.exe, it is prompting one COMMAND PROMPT SCREEN and it is disappearing soon. In fact it was suppose to ask language preference as per installation guide.
Dont know how to resolve this issue. please help me out.
Thanks in advance,

pparkko wrote:
With this type of behaviour, you always need to find out the real error.
Try opening a command prompt (cmd) and running the command from the command line.
Then you can see what is going wrong.I have a question, I just upgraded our test 11i database (9i) to 10g (10.2), as a part of that upgraded forms, reports, graphics to patchset 18. Now planning to install 10giAS on appsTier on which forms, Apache and discoverer running. If I install 10giAS in differnet home, how can I get that in to appsTier?, does it mean adapcctl script no longer be used to start webservices?. I haven’t done this before, if my question is stupid, please ignore :).

Error while installation of content server.

HI
I installed the plumtree portal (PlumtreePortal_v5-0.exe) and Content server (PlumtreeContentServer_v5-0.exe). The portal is working fine. But When I completed the installation of content server I received the following errors, when I checked the diagnosticTests.jsp Which tells whether the installation is successful or not....
I found 2 bugs
- Root Section Publishing Target
- Root Section Preview Target
Possible Resolution is as follows.
The Publishing Target Browser Path is invalid. The item was published successfully but could not be found at the Browser Path. To change the publishing target right click on the root folder in Content Explorer and choose "Publishing Target". Click on the Publish Tab. Change the Browser Path to a valid path.
I am not able to find the Content server explorer. Please let me know how and where can I find these editor
- Content server explorer
- Portlet Editor
- Data Entry Template Editor
- Presentation Template Editor
- Workflow Editor
- WebDav Interface
Thanks
Vivek

Hi Sankar
Error indicates memory problem.
1. go to configtool and change the values for > server0 > Max heap size = 2048 MB.
-xx:NewSize=320m
-xx:MaxNewSize=320m
-xms2048m
-xx:PermSize=256m
-xx:MaxPermSize=256m
Please check the note 723909 for any further clarification.
Exclusively for Sun Solaris
Check the following:
1050866 : Java VM terminates under Sun Solaris 5.10 during install.
1048824: JLaunch may fail to start the Java VM during installation
Hope this helps
Cheers !!!
Satish Kumar.

Content Server Installation in DMS

Dears,
We are implementing DMS on our Windows server and Database is Oracle 10.2.0.4.
For it I have installed ECC6 server and now as I know I have to follow SPRO steps for DMS configuration.
Beside it I have to install a content server also,For which our plan is to install it on the same server.
I searched on marketplace I found latest version of it is 6.30 and I found a zip file of it.
So please suggest for which version I should go and how can I install it.If possible please confirm CD label also.
Shivam

Dear Shivam
Version 6.30 should be fine.
Please refer following links for installation steps:
http://www.sdn.sap.com/irj/scn/index;jsessionid=%28J2EE3417700%29ID1082076150DB11142388719732284620End?rid=/library/uuid/cfa73246-0a01-0010-71b4-bc21ccb45c99&overridelayout=true
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/9041e249-5c4e-2a10-e6ab-e5672bb968b6&overridelayout=true
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/400a0694-0701-0010-3a8f-c1a9b6afc3fa&overridelayout=true
http://www.saptechies.com/installation-guide-sap-content-server-for-windows/
Best Regards
Amaresh Makal

Content Server installation on MaxDB datbase

Hi,
I am going to install Content Server 6.40 on MaxDB datbase 7.6.03, can any body guide me in the below points:
1) Shall I install the below in a single Drive in my server like (C:.....etc)
a) MaxDB Independent Programe Drive b) MaxDB Independent Data Drive
c) MaxDB Instance- Dependent Software Drive
1) How many Data Volumes will be created with default installation
2) can we increase existing Data Volumes, if so what is the maximum volume
3) What is the maximum Data Volume in GB that we can assign
4) If we assign 50 GB or 100 GB in a single Data Volume will there be a performance issue.
Thanks in advance.

Take a look at installation guides at [service.sap.com/instguides]

Content server installation on susi linux 9

Hi friends
this is first time i am installing content server on linux system . and i facing too many problems as iam really not aware of linux
anway can provide me step by step details to install and configure content server on linux operating system

Hello!
I presume (taking the name of this forum) the original question was about SAP ContentServer?
This would be a rough description how to configure a SAP CS/CSC for FileSystemStorage
0) if linux is not your platform of choice (it would be mine) - take a different platform
1) read and understand SAP notes, especially 664384, 586895 and related
2) make sure you are using an enterprise linux (cf. service.sap.com/PAM)
3) your linux installation should (amongst others) contain
    a) gcc (GNU c-compiler)
    b) gdbm-devel
    c) libexpat
in general this would be described as a development (with regard to software building) system by some linux distro's
4) retrieve the apache 2.0.x (for allowed x: cf service.sap.com/PAM) source code to build your own apache
5) be root user
6) create group sapsys
7) create user csadmin, primary group: sapsys
8) you may want to create an own filesystem for content, e.g. /SAP
9) as user csadmin build apache with option (amongst others) --prefix=/home/csadmin (presuming this is csadmin's HOME)
10) if you also need the cache server (you will as soon as you have more than 1 location, repeat 6, 7 and 9 for user cscadmin
11) as root (make sure you have X), execute sapinst from the installation master
12) installation almost as under Windoze - don't use AdminSecurity as it will not work with modern UNIXes (ContentServer wrongly assumes that /etc/passwd contains the crypted passwords and there's a note proposing to put it there - security alert in my humble opinion) - better to protect transaction csadmin
13) you should be all set
I hope I didn't forget anything - this was from memory.
Contact me if you have problems.
Good luck and best regards, Markus

Apache issue in Content Server 6.40 installation

Hi,
We are installing content server 6.40 in HP Unix 11i v3. We have downloaded Apache 2.0.65. As per SAP Note 664384 we tried to install Apache but failed in step 'configure' apache. We got error ''configure not found" . We already stuck with this. Please suggest a solution so that we can go forward. Waiting for valuable comments.
Regards,
Cinu

Hello Deepak,
Thank you for the help. We have problem in compiling and creating binaries. We found GCC compiler is missing in our system. When I check installed compiler by given command
swlist -l product | grep -i compiler
COMPLIBS              B.11.31        Compiler Support Libraries
PHCO_42454            1.0            Linker/Compiler/Unwind ENG Manpage Patch
PHCO_42463            1.0            linker/compiler/unwind Japanese manpage patch
PHSS_38155            1.0            bundled PA C compiler on IPF
Shall I go with installl GCC compiler?

Error occurred in diagnosticTests.jsp after installation of content server

HI
I installed the plumtree portal (PlumtreePortal_v5-0.exe) and Content server (PlumtreeContentServer_v5-0.exe). The portal is working fine. But When I completed the installation of content server I received the following errors, when I checked the diagnosticTests.jsp Which tells whether the installation is successful or not....
I found 2 bugs
- Root Section Publishing Target
- Root Section Preview Target
Possible Resolution is as follows.
The Publishing Target Browser Path is invalid. The item was published successfully but could not be found at the Browser Path. To change the publishing target right click on the root folder in Content Explorer and choose "Publishing Target". Click on the Publish Tab. Change the Browser Path to a valid path.
I am not able to find the Content server explorer. Please let me know how and where can I find these editor
- Content server explorer
- Portlet Editor
- Data Entry Template Editor
- Presentation Template Editor
- Workflow Editor
- WebDav Interface
Thanks
Vivek

Hi Romain Testu, Jstorz & srinathmenon:
Thanks for the information on the 2 exes that I need to run (IdcServer.exe & IdcAdmin.exe). I ran these two exes from the command prompt as suggested by srinathmenon (I first ran IdcServer next IdcAdmin). However, I did not find any new windows services showing up, with any similar sounding name.
I once again visited the http://localhost/idc, and when I clicked on the picture of the LOCK, I found a new difference from before. Earlier, I was getting an error message as soon as I clicked on the LOCK. Now, when I clicked on the LOCK, I got a prompt for Username and Password. I typed the default sysadmin & idc. Then I got logged onto a window which says "Oracle Content Server", with three Tree-view dropdowns on the left (My Content Server, Browse Content and Search).
But in the main part of this Oracle Content Server window, it gives the following error message: -
Content Server Request failed..Unable to retrieve page. Permission denied. Address 127.0.0.1 is not an allowable remote socket address
Could you please suggest what could be wrong here?
Thanks,
-Deepak

Content Server Explorer is not available after sucessful installation of Plumtree Portal

Content Server Explorer is not available after sucessful installation of Plumtree Portal.
Please reply us.

To clarify, do you have the User Profile Service (including MySite Host) up and running on this environment? That's subtley different to the full MySite experience which is clearly not applicable...
Interesting question - thanks for that. Until now I didn't realise there was a difference.
The User Profile Service is up and running, but no MySite Host is set. (I don't believe MySite will be available anywhere here. I guess that means there's no valid MySite Host for me to use.)
Many thanks,
Geoff

Content Server - Disassociated installation

Similar Messages

Maybe you are looking for