Content Server error on LINUX (HTTP error: 404 Not Found)

Hi All,
While checking the status of content sever by using the T-code CSADMIN I am getting the following error message.
<b>***********************************************************
Error : - HTTP error: 404 Not Found
Message no. CMS025
Diagnosis
Error in accessing via HTTP
404 Not Found
*************************************************************</b>
I have done the installation of Content server 640 on Red Hat Linux / MaxDB.
Moreover I am using the following connection data in CSADMIN.
HTTP server :- 80.0.0.205
Port Number:- 1090
HTTP Script :- ContentServer/ContentServer.dll
Version no. :- 0046
Please help me.
Thanks ,
Harshal

Hi Dagmar,
The HTTP services are working fine. But i m not able to reach the content server url can u help on this?
Please find the http trace file
ERROR => PlugInHandleServData: HttpParseRequestHeader failed (rc=701) [http_plg.c 3258]
ERROR => IcmHandleNetWrite(id=3/4782): HandleServData failed (rc=701) [icxxthrio.c 1833]
The error i am getting in Content server url is
Server Error
404 - File or directory not found.
The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.

Similar Messages

Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.

Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

Error: on clicking Registry menu item in ESM Management Portal. The request failed with HTTP status 404: Not Found.

Hi,
I have installed ESB Management Portal successfully after following all the steps. everything is working fine except when I click the Registry menu in the portal. I get an unhandled exception. The event viewer shows the below error "The request failed
with HTTP status 404: Not Found."
================================================
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 1/27/2015 5:56:10 PM
Event time (UTC): 1/27/2015 5:56:10 PM
Event ID: f7aedd39118845b79c17d3442a0d15a7
Event sequence: 54
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/ESB.Portal-1-130668549484455107
Trust level: Full
Application Virtual Path: /ESB.Portal
Application Path: C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\
Machine name: <Machine Name>
Process information:
Process ID: 4712
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
Exception type: TargetInvocationException
Exception message: Exception has been thrown by the target of an invocation.
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
The request failed with HTTP status 404: Not Found.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Practices.ESB.Portal.UDDIService.UDDIService.GetCategoryByName(String UDDIServerUrl, String tModelName) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Web References\UDDIService\Reference.cs:line
575
at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.getBTEndpoints(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
553
at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.GetEndpointsByApplication(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
46
Request information:
Request URL: http://localhost/ESB.Portal/uddi/uddi.aspx
Request path: /ESB.Portal/uddi/uddi.aspx
User host address: ::1
User: <domain>\<user>
Is authenticated: True
Authentication Type: Negotiate
Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
Thread ID: 19
Thread account name: NT AUTHORITY\NETWORK SERVICE
Is impersonating: False
Stack trace: at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
=================================
Any idea why this is happening and what needs to be done ?
PLEASE HELP
Thanks & Regards
Vikram

Snippet from the link below:
If you get a “404: Not Found” error, it ‘s because by default there is no script map for .svc file with default IIS 7.0 installation, so you need to register .svc extension in IIS:
You need to update IIS script maps to register .svc extension In a command prompt (ran as administrator), execute the following command:
“%windir%\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe” -r -y"
Refer:
https://dgoins.wordpress.com/2010/05/01/esb-toolkit-management-portal-installation-notes-from-the-field-2/
Sarvanan's blog around this with detailed explanation:
Configuring Exception Management Portal
As mentioned above also
Check Portal Configuration Settings
Rachit
Please mark as answer or vote as helpful if my reply does

Http status 404: Not Found Error in BPC Admin

When opening BPC Admin, click on Manage Security, Manage Applications, Application Sets, etc. receiving an error message - The request failed with HTTP status 404: Not Found.
At this point we can not add users or import data.

Dear Mike Formica,
Please make sure you have installed the BPC Admin on your PC first. If you've installed, you could use the BPC Admin without SAP Web. You can see the file .exe in the directory "C:\Program Files\BPC" and click the file name "OsoftAdminMain.exe" and please make sure again you have the admin privillage in SAP BPC.
Thanks,
Wandi

Failed to load resource: the server responded with a status of 404 (Not Found)

I uploaded 2 x small Wordpress sites to Azure this morning using the local Git repository on my iMac. They worked fine when I checked them earlier and now I see the websites are not loading correctly with 30+ errors on each effecting all .css, .js and
.jpg files - using view source, these are the error messages.
Failed to load resource: the server responded with a status of 404 (Not Found)
When I open the web root in my ftp client the files are definitely there as you would expect. I am using Azure Small Basic Hosting, any thoughts on what has gone wrong and how to fix the websites?
Site 1: http://goo.gl/VONbHc
Site 2: http://goo.gl/wdTP67
Liam

Hi,
I tested your site 1, when I open http://goo.gl/VONbHc, it direct me to
http://templestudios.azurewebsites.net/ ,so I think you create templestudios as your azure website name. it seems that the page will go directory to another page, one image html code as below.
<img width="300" height="225" title="Portrait Photography" class="thumb wp-post-image" alt="Portrait Photography" src="http://www.photostudio.ie/wp-content/uploads/portrait-girl-dublin-300x225.jpg">
The image was not found seems more relate to
http://www.photostudio.ie , I open this site, contents are as following screenshot.
Hope this helps
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The request failed with HTTP status 404: Not Found

Hi
BPC version we are using is : 5.0.502
When we Publish all reports using the steps below:
a. Log into BPC Web
b. Click on Available Interfaces> Select BPC for Administration
c. Under Web Admin Task Click Publish Reports
d. Select all of the reports and click the green check mark to publish the
reports.
I am getting following message 'System.Exception: The request failed with HTTP Status 404: Not Found. Event log relation to this error is given below.
Event Type:     Error
Event Source:     OutlookSoft log
Event Category:     None
Event ID:     0
Date:          12/8/2008
Time:          11:26:42 AM
User:          N/A
Computer:     BPCAPP
Description:
==============[System Error Tracing]==============
[System Name] : OSoftCPM
[Message Type] : ErrorMessage
[Job Name]     : AuditMgrService/SetAuditReportFiles
[DateTime]     : 12/8/2008 11:26:42 AM
[UserId]       : MMPlanning
[Exception]
    DetailMsg : {The request failed with HTTP status 404: Not Found.}
==============[System Error Tracing End ]==============
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.
We tried ' Publish all reports' as the resolution of error 'object variable or with block variable not set' on modifying an application as per sap note Note 1131320
If anyone knows the resolution for the above issue, please help me.
Thanks in advance
Sajeev Abraham

Hi
Thanks for the response.
Below are the full contents of the error message pop-up.
( System.Expection: the reguest failed with HTTP status 404:Not found at
Microsoft.Visualbasic.CompierServices.lateBinding.LateGet(Object o, Type,String name, Object
[]args,sTRING[]paramnames, Boolen[]CopyBack)
at OSoft.Services.WebServices.ReportmanageProxy.ReportManageProxy.SetPubishReport(String strAppSet,string
strApp,string strFiter)
url is given below
http://<HostName>/osoft/Admin/WebAdminMain.aspx
BPC Deployment is Multiple server ( Two servers) Database and Application deployed seperately.
Sql Reporting server is working.. I could connect using sql management studio.
Thanks

"workflow.asmx" method The request failed with HTTP status 404: Not Found.

When consuming workflow.asmx webservice from , I am getting an error on below line number 3.
1.POC.SPasmxWF.Workflow objSPasmxWF = new POC.SPasmxWF.Workflow();
2.objSPasmxWF.Credentials = System.Net.CredentialCache.DefaultCredentials;
3. XmlNode dataNode = objSPasmxWF.GetWorkflowDataForItem("http://in-mum01:7000/sites/PPP/2014-0002/PPPLibrary/GBL-IQ00120140008.doc");
Error details: {"The request failed with HTTP status 404: Not Found."} " at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean
asyncCall)\r\n at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)\r\n at POC.SPasmxWF.Workflow.GetWorkflowDataForItem(String item) in E:\ERT\\Web References\\SPasmxWF\\Reference.cs:line 234\r\n
at POC.Program.Main(String[] args) in E:\\POC\\POC\\Program.cs:line 27\r\n at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args)\r\n at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()\r\n at System.Threading.ExecutionContext.Run(ExecutionContext
executionContext, ContextCallback callback, Object state)\r\n at System.Threading.ThreadHelper.ThreadStart()"

Hi,
For a better troubleshooting, I suggest you to do as follows:
1. On server side you can access the Workflow.asmx from IE to make sure there are no problems in code logic.
2. On client side you can also access Workflow.asmx from IE to see if it returns error.
3. Check the link below:
http://www.mail-archive.com/[email protected]/msg02092.html
If you want to operate the workflow in Client-Side, we can use Client Object Model in SharePoint 2010 to achieve it.
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.client.workflow(v=office.14).ASPX
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

'HTTP Code 404 : Not Found' in SE80

Hi,
I have consumed WSDL using consumer proxy in SAP system. Now I am trying to test this proxy.
But, getting error
Error when calling SOAP Runtime functions: SRT: Unsupported xstream found:
("HTTP Code 404 : Not Found")
I have maintained correct URL and port, computer name in SOAMANAGER, still I am getting this error.
Please advice.
Regards,
Sneha Nikam

Hi Sneha,
Please check if you created logical port in SOAMANAGER and same logical port is used in the proxy class.
please also check below discussion
Re: Error when Consuming Service in ABAP
regards,
Harish

SOAP:1,007 SRT: Unsupported xstream found: ("HTTP Code 404 : Not Found")

Dear expert,
When i run sap call .net web service ,it occurs error:
SOAP:1,008 SRT: Couldn't create Object: ("ICF Error when creating object for HTTP DESTINATION "tempuri.org": DESTINATION NOT FOUND")
Exception of class CX_AI_SYSTEM_FAULT
Could you please tell me how to do?
Looking forward to your reply.
Best Regards,
Merry

Hi Merry,
Did you create a logical port (using transaction code SOAMANAGER) for your client proxy & add the necessary configuration pointing to the .NET web service?
Also, if the logical port is configured, make sure that the URL ( for WSDL with endpoint) that you've specified for the logical port is correct. Error 404 generally means that you have made contact with the service provider but it can't find what you're looking for.
As a quick sanity test, you can run a test request to the service provider using a free tool SoapUI just to make sure that everything on the provider side is ok (i.e. they have provided correct WSDL with binding)
In future, please post this type of question in the SOA forum, see URL below, that's the correct forum for it. Thanks:
Service-Oriented Architecture (SOA) and SAP
Regards, Trevor

DashBoard error: 404 - not found

Dear Friends,
I was trying to Set up the Dashboard in My System. Have done all the necessary steps as Instructed by SAP. Have assigned all the necessary licenses to the B1i user. Have Restarted all the required Services. But I am getting the following error:
SAP B1ip detected error:
Emitted HTTP Code:
404-not Found
Internal reasons
/com.sap.b1.dashboard/001sap0001.SAP_DASHBOARD_001.DAB001/default.html
I am using Windows7: Sql 2005: SBO 8.8 PL13.
But I have not Installed xcelsius..is it necessary to Installed it..?? PLS advice...!!
Experts pls help need to config the System ASAP.
Regards,
Aravind Kumar. S

Hi Aravind,
may you have Win7 in a 64Bit Version ?
If so, and IF you correctly installed
- the 32Bit JDK 5.0.22
- AND the 64Bit JDK 5.0.22,
- AND you have given the B1i user a password
- AND you have minimum CONNECTED once with the B1i user to SBO
- AND you have choosen the _64Bit_ installer from the installaltion directory \Technology\x64\setup.exe
- AND all your test connections will working fine (in the landscape section of the B1i configurator)
... than there is still one source of trouble!
During the installation procedure, you will be asked, to link to the 64Bit and the 32Bit installation path of the JDK.
The problem is, that the preselected path of the 64Bit JDK is pointed on the 32Bit path.
In an 32 Bit environment, the default program-installation path is C:\Program Files\
In an 64 Bit environment, the default program-installation path C:\Program Files\ is only for 64Bit
and the default program-installation path for 32Bit programs is changed to \Program Files (x86)
In the above mentioned screen (where you select the 64Bit and 32Bit JDK) both default-paths are pointing on the 32Bit path
C:\Program Files (x86) \ JAVA
correct it must be for 64Bit without (x86)
C:\Program Files\Java\jdk1.5.0_22
and for the 32Bit
C:\Program Files (x86) \Java\jdk1.5.0_22
It is very easy to ignore this wrong preselection!!
You can`t change this after Installation and I`m not sure if you can test/proof what was defined.
So the easiest way is to DE- and RE-install the whole B1i again - that only takes 10 minutes.
Hope that helps to solve your problem.
regards from Hamburg
Heiko

SAP B1iP detected an error 404 Not found

我根据Yatsea 写的Creating New Dashboard Packages for Sap Business One 8.8以及提供的sample一步一步的去做，到最后一步提示如下错误：
SAP B1iP detected an error:
Emitted HTTP-Code
404-Not Found
Internal Reason
/com.sap.b1.dashboards/001sap0001.XXX_Top_10_BPs.Top_10_BPs/default.html [err004]
Recommendation
Check for the correctness of your activity or environment or ask your system-administrator for further help.
tid
10111016465218008162C0A8016D9A20
Full Internal Error Message
/com.sap.b1.dashboards/001sap0001.XXX_Top_10_BPs.Top_10_BPs/default.html [err004]
这是什么原因啊？我折腾了一天了，还没弄好哦。。。。

Hi Jay,
     我重新导入了，有看到event,是在Failure里面。
   Result Message是：no scenario step (vBIU) associated for this step for the incoming system (SysId)
     Msg是：
    <?xml version="1.0" encoding="utf-8" ?>
- <Msg xmlns="urn:com.sap.b1i.vplatform:entity" MessageId="10111710462131508066C0A801672D97" BeginTimeStamp="20101117104621" recording="false" logmsg="0009" MessageLog="true">
- <Header>
<IPO Id="INB_HT_CALL_SYNC_XPT" tid="10111709282731508057C0A801674050" />
<Sender Id="001sap0004" />
</Header>
- <Header>
<IPO Id="INB_HT_CALL_SYNC_XPT" tid="10111709282731508057C0A801674050" />
<Sender Id="001sap0004" />
</Header>
- <Body>
<Payload Role="T" Type="Call" add="" />
- <Payload Role="S">
<io xmlns="urn:com.sap.b1i.bizprocessor:bizatoms" pltype="ure">==== data-length: 0 ====</io>
</Payload>
</Body>
- <Body>
<Payload Role="T" Type="Call" add="" />
- <Payload Role="S">
<io xmlns="urn:com.sap.b1i.bizprocessor:bizatoms" pltype="ure">==== data-length: 0 ====</io>
</Payload>
</Body>
</Msg>
为什么会失败呢？失败的原因是什么呢？怎么解决呢？
我看了里面Warning的信息：
An IPO-Execution profile cannot be given, as the necessary log-information is missing!
Make sure to set in the config-file 'xcellerator.cfg' the log-level for the components
'com.sap.b1i.bizprocessor' and 'com.sap.b1i.dblayer' to 'CONFIG' (restart B1iP afterwards).
Then, enable detailed logging for the particular IPO-Step and re-execute the particular IPO-Step!
所以我检查了我的xcelerator.cfg文件。
Dolphin
Edited by: Wu dolphin on Nov 17, 2010 3:52 AM
Edited by: Wu dolphin on Nov 17, 2010 4:47 AM

403 forbidden and 404 not found on dispatcher

Hi people,
As I'm viewing pages on my dispatcher server I get 403/404 on some resources:
Failed to load resource: the server responded with a status of 404 (Not Found)
http://our.dispatcher.server/libs/cq/i18n/dict.en.json
Failed to load resource: the server responded with a status of 404 (Not Found)
http://our.dispatcher.server/libs/cq/security/userinfo.json?cq_ck=1373462597320
Failed to load resource: the server responded with a status of 403 (Forbidden)
http://our.dispatcher.server/libs/cq/ui/rte.js
Although I understand the 404s (I can let them pass in the .any file), I was wondering why would I need those on the dispatcher server?
As for the 403s, same remark: why do I need rte (rich text editor?) on the publish/dispatcher site?
Thanks for any help.
JS.

Failed to load resource: the server responded with a status of 404 (Not Found)
http://our.dispatcher.server/libs/cq/i18n/dict.en.json
Failed to load resource: the server responded with a status of 404 (Not Found)
http://our.dispatcher.server/libs/cq/security/userinfo.json?cq_ck=1373 462597320
Those 2 seem to have been pinpointed here: /libs/cq 404 error

Content managemtn http error 404 not found

'http://<host name>:<port no.>/ContentServer/ContentServer.dll?serverInfo'
status is running but when I m a trying to configure
in OAC0, with these fields fill.
Document Area: Document Management System
Storage type: HTTP Content server
Version no: 0046
HTTP server: IP address for content server host
HTTP Script: ContentServer/ContentServer.dll
I am getting an error
http: 404 not found

HI stiaan,
Thank you for the quick response.
When I execute transaction csadmin. its firs asking me the details of the content server like in two fields.
Repositry, server .
I have given all the correct details n I am getting new error.
1. This error is comming when I have check the SECURE CONNECTION box.
connection to partner 'localhost:0' broken / CPIC-
CALL: 'ThSAPCMRCV' : cmRc=20 thRc=223#CPIC program
connection ended (read err
2.If I uncheck the secure connection box I m getting same error.
http error 404 not found.
3. do we need to define any rfc connections in sm59 to content server..??
again thx.
Edited by: letzfriend on Jan 26, 2012 8:59 AM

Error: CIM_ERR_FAILED: HTTP response code: 404 Not found

Hi, we had finished to install Sap Netweaver Usage type PI (Abap +Java), now we are running Post Installation task, but we are getting an error when we ran "Configuration Wizard"
In the step: Configure the integration server for sld
Error: CIM_ERR_FAILED: HTTP response code: 404 Not found
Any Idea?
Thanks
Elias Mendoza
The following lines are part of the error log:
Debug Events
InvokeService:Configure the integration server for sld
Library: sap.com/tclmctctemplateslevel1_4_tcc
SourcePath ./PIPostInstallProcess/configureIntegrationServer8
Time 2008/07/07 at 20:47:33
WSDL /content/NetWeaver/PI/service/SLDConfig_configureIntegrationServer_configureIntegrationServer.wsdl
Execute Java Service
Library:sap.com/tclmctcutilbasic_ear
Class:com.sap.ctc.util.SLDConfig
Method:void com.sap.ctc.util.SLDConfig.configureIntegrationServer(java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String)
InvokeService- Result: Failed
Exception Message:CIM_ERR_FAILED: HTTP response code: 404 Not found
Exception Class:com.sap.sld.api.wbem.exception.CIMCommunicationException

Dear
Possibly CIM content is not uploaded to your SLD.
Is your SLD running properly ?
Did you install this SLD as a local SLD at the installation of your SAP system (along with other stuff using sapinst) ?
<removed_by_moderator>
Kind regards
Tom
Edited by: Julius Bussche on Jul 8, 2008 1:55 PM

While processing a message : Error HTTP 404: not found

Hi gurus,
I'm stuck on a File-XI-IDoc scenario.
Here is the message i get in the Message Tool Display:
Erreur lors de la transmission du message au point d'accès http://rchase12:53000/sap/xi/engine?type=entry via la connexion File_http://sap.com/xi/XI/System. Motif : com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found
It's in French but it it's like my url is not good. I read about the port that must be 80xx in place of 53000 is it true?? I can't find any information about it, in another place than some forum topics.
Could anyone help me?
Thanks in advance.
Thomas

Hi,
Description: The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
Possible Tips:- for HTTP_RESP_STATUS_CODE_NOT_OK 404
u2022 404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs. Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
u2022 Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
u2022 If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
u2022 If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination.
Regards,
Shabari

Content Server error on LINUX (HTTP error: 404 Not Found)

Similar Messages

Maybe you are looking for