Content Server HTTP Error 500

Hi
We've installed Content Server 6.40 according to installation guide SAP Content Server for windows (SAP Netweaver 2004s)
We've created a repository via tcode CSADMIN.
We see server status running when we use url
http://192.168.100.121:1090/ContentServer/ContentServer.dll?serverInfo
When we try to test content repository via report RSCMST and after report RSCMSTH0 we get error
x-errordescription: "ContRep ZMYREPOSITORY or Storage entry not defined"
And also we see the error
HTTP error: 500 (Internal Server Error) "ContRep ZMYREPOSITORY or Storage entry not defined"
at tcode SCMSMO
How can we correct this error?
Best Regards...

Hi Hande,
It seems your installation is completed but not configuration. Have you defined content repository ZMYREPOSITORY with tcode SCMSMO
Regards,
Hari.

Similar Messages

Content Server - HTTP Error 400

Good morning. I've just installed Apache and Content Server. I've created my Content Repositories in SAP and everything checks out Online in CSADMIN and via SE38 - Report RSCMST.
However, from the Browser when I enter: http://<hostname>:1090/ContentServer/ContentServer.dll?serverinfo
I'm getting an HTTP 400 page not found error.
This is installed on Unix - AIX 5.3 - Content Server Version 6.30
Apache is working as I get a web page and I get the "Parent" directory when I enter only: http://<hostname>:1090
Any ideas ?

Our Content Server is installed on a Standalone system. It's not on the same host as the SAP systems we're connecting to.
Yes, I'm able to create Content repositories and that's how I have them defined in CSADMIN. I created the CR's in OAC0 and then specified them in CSADMIN and done further configuration to them there. Our users have been able to use the CR defined in CSADMIN to archive data into the Content Server.
My CDADMIN definition is online, active and working,,, All green lights and being used. So I'm getting my error when I attempt
to access via http://<ContenServer_Hostname>:1090/ContentServer/ContentServer.dll?serverinfo.
Here's my CDADMIN definistion for My CR:
Content Repository: CS
HTTP Server: sap01dad.<client>.com This is my Content Server Hostname,,, Not the SAP system where it's defined in CSADMIN
Port: 1090
HTTP Script: ContentServer/ContentServer.dll
Version: 0046

Content Server HTTP error: 405 Method Not Allowed in CSADMIN transaction

Hello,
After installing the content server, when configuring in CSadmin
transaction, when we try to save the new settings, I get the errror
HTTP error: 405 Method Not Allowed.
The operating system is W2008 R2 SP1. The storage type is filesystem, we do not use the MAXDB database. However, I have made so many tries, that, finally Ihave installed the system with database, although we are not going to use it (we have more content servers installed with database and they are working fine). Despite of this, it doesn't work either. The error message is the same.
The Content Server release is 6.40
Thanks and best regards,
Ana

I have seen this issue on Windows 2008 R2 with IIS 7.5. This was the solution of mine
The error 405 appears because you have installed WebDav IIS Role in IIS 7.5. Please uninstall that particular role.
Regards,
Subhash

HTTP error: 500 (Internal Server Error) while creating content server repst

Hi All,
I am getting the HTTP error as mentioned below,
HTTP error: 500 (Internal Server Error)"CreateTab ContentStorage, connect error SQLConnect failed, [Microsoft][ODBC Driver
Manager] Data s
My content server is running on a Microsoft Cluster Environment.
I tried to follow the steps in the SAP note 301352.
Please help me in registering the LiveCache ODBC driver.
When i excute the the odbcreg.exe file i get the foll,
E:\sapdb\programs\pgm>odbcreg.exe
DriverName=MaxDB
Driver=e:\sapdb\programs\pgm\sqlod32.dll
Setup=e:\sapdb\programs\pgm\sqlsp32.dll
Version=7.6.0.0
Please help me in registering the Livecache ODBC driver.
Expecting your kind reply.
Vineeth

hi Vineeth Damodar
do it in command prompt.
change the drive letter ...where u install the sapdb.
D:\odbcreg LiveCache -i -p d:\sapdb\programs\pgm
it will prompt that LIvecache is registred. Restart the server.
then check in control panel...
The LiveCache ODBC driver should then be registered in the Control Panel -> ODBC Drivers -> Driver tab
-- Lee
rewared points .. if it helpful for u....

HTTP error 500 on Content Server test (RSCMST), after CS migration.

Hello all,
I have migrated a Content Server 6.30 system from HP-UX and MaxDB 7.3.00.42 to CS 6.40 on Windows and MaxDB 7.7.06.15. While the migration of the database and the install of the CS 6.40 seems to have completed successfully, I am having trouble connecting to it from the R/3 system.
Following some clean up steps suggested by SAP support, I am able to connect to the CS system using the "serverInfo" query, and I am also able to connect to the existing repository through CSADMIN. However, when I run the RSCMST tests, they all fail with the error: HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0".
Below is a summary of the tests/connections that work and the ones that do not.
URL for serverInfo: http://<hostname>:1090/ContentServer/ContentServer.dll?serverInfo - Returns successfully and displays status of CS.
CSADMIN - All tabs on csadmin display correct information, from the CS and respository.
SE38 - program=RSCMST - All tests return the following error: HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
I have also confirmed that I am using the most recent ODBC driver on this CS(at the request of SAP support), with the command sdbregview -l. - Returns the following: ... ODBC g:/sapdb/programs 7.7.06.15 64 bit valid ...
If anyone has any suggestions on what else I can check for this error, I would greatly appreciate it. Thanks in advance.
Regards,
Rusty Robbins

Well, I have good news to report... finally!
The main problem I had with the 500 error was caused by an incorrect version of MaxDB, for CS 6.40 (as SAP support pointed out in the message I had opened with them). Once I had completed the migration using MaxDB 7.6.06.05, I was able to connect successfully.
When I first performed this migration (with 7.6.06.05), I "thought" I was still getting the same 500 - internal error, but after looking at it closer I realized that the error had changed to say something like "table is set to read-only". I then realized that I had forgotten to perform a full data backup, following the last import. Once I completed this backup, I was able to connect to this CS system from R/3, with all of the test programs (RSCMST, etc).
Just to be sure, I performed this migration from scratch again, and was able to repeat the successful migration and tests. I have now turned it over to the functional teams for testing, and hopefully they will not find any issues. ;p
Thanks to all that responded and to those that reviewed this post!
Regards,
Rusty Robbins

HTTP error 500: Internal server error: In OAC0 tcode - CS Admin button.

Hi,
In our ecc system, when I go to OAC0 TCode and click the button CS Admin, it does open the page "Content Server administration" but on the bottom bar I always see error "HTTP error 500: Internal server error".
I want to know if this is normal. We have setup archiving a few years back.
The Archive database is Filenet system and using websphere web server.
Thanks.

Thanks you But ys, the backend archive server (in this case Filenet along with Websphere) is up and running all the time.
How do I check content repository connection?? is it in OAC0? If yes then we did it and it works fine.
We have also resent the certificate from OAC0 and it got imported at their end too. Yes our SAP system got refreshed but after that we created new entry in strustsso2 and exchanged the certificate. But till date I have always seen HTTP 500 on the "Content Server administration", enen on production server. Not sure if this is normal.
Apart from this, on non production systems we are unable to perform any kind of archiving too. We get HTTP500 whenever we run a Store Job.
Regards,

HTTP error: 500 Internal Server Error 0

Hi,
I've upgraded a third party server.
Everything was working fine before the upgrade.
But now when I go to OAC0,
if I do "test Connection" it is sucessful
but when I send a certificate it says
"HTTP error: 500 Internal Server Error 0"
I've tried
1. adding the server name in host file.
2. tried configuring the R/3 systems
3. configuring the R/3 gatways
4. testing the connection from the archive server.
everything is working fine.
But still i get the error
Pleae advice
Edited by: Gautam Samant on Sep 18, 2008 12:29 PM

Hi anirudh
The details are :
I'm trying to connec SAP R/3 to IXOS 9.6.1.
The database used is MS SQL 2000 SP4.
I've sucessfully configured the archive databse, archive server, everything.
I've even updated the database to match with IXOS.
The connection testing from both ends are working fine.
But when i try to send a certificate from SAP to IXOS,
its showing 500: internal server error.
What might be the reason?
Regards,
Gautam
Edited by: Gautam Samant on Sep 25, 2008 2:33 PM

HTTP Error 500: Internal Server Error

When going to webmail.nc.rr.com I get HTTP Error 500: Internal Server Error.

Hello,
This error is usually caused when people are on a BES (as opposed to BIS).
The BES needs to be reconfigured to allow the Proxy to allow you access.
The MDS needs to have configuration changes.
Sometimes this is caused by your Blackberry server being an earlier version than 3.6. Upgrading to BES 3.6 or later will fix this issue (http://www.blackberry.com/btsc/KB02025).
Alos, get your BES ADMin to refer to the following link and see the note at the bottomof the webpage:
(Note: Incorrect or invalid encryption types within the krb5.conf file can result in HTTP 500 errors when attempting to browse to websites that require Kerberos authentication.)
http://www.blackberry.com/btsc/KB15642
Hope that helps!
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq

HTTP Error 500.24 - Internal Server Error on Web service sdk

Hi, I have installed the mfa server on premise and tested successfully with sms and phone call. I wanted to try the Mobile app so I installed the Web service en the Mobile app according to instructions (changed the web.config with username
and password and url of web service sdk) but when I try to activate the app I get an error related to the web service sdk (also when I try the TestPfWsSdkConnection) : the error says
HTTP Error 500.24 - Internal Server Error
An ASP.NET setting has been detected that does not apply in Integrated managed pipeline mode.
I try several thing but no luck.
Windows server 2012 R2 with iis 8.5
Anybody an idea of what I am doing wrong? Thanks
Andrea

Having the same problem, I see you marked yours as answered with no replies. Can you share what you did to resolve the problem?
Regards,
Steve Angell - IAM Practice Director http://www.InfraScience.com)

[EWS] [Exchange-Online] Http error 500 CAS server not available

We have a customer using our software to connect to outlook.office365.com via EWS. The application creates messages in the user's mailbox. We are seeing intermittent http error 500, with the fault string "Exchange Web Services are not currently available
for this request because none of the Client Access Servers in the destination site could process the request.". The software then retries the request, and usually succeeds. I have not seen this error with other customers, just this one.
Why does that happen, and what can be done about it?

Hi,
As per the information and details provided by you, I think you should: -
Check the Require SSL check box under Exchange Web Services (EWS). Often, this is done under Autodiscover instead of EWS.
Perform a reset of the Synchronize Connection and Excahnge Mailboxes (SIB) from the Edit Unified Messaging Account page.
I hope this information will be helpful for you.
Thanks and regards
Ashish@S
Ashish@V

Content Server, Certificates error

Hello.
I have an AS ABAP and Content Server.
On the certificates tab (t-code CSADMIN), clicked "Send Certificates" button error occured
Error message : HTTP error : 500 Internal Server Error
SsfCreateProfile error while creating
/sapdb/home/nhccs/security/Z_T_KIM.pse rc=24
Another questions :
Q1. Creating a repository, I might use IP address or hostname for HTTP Server?
Q2. (t-code CSADMIN)Setting tab, the first field "Content Storage Host". I want to user my content server to store contents so that I input the IP address instead of "localhost(default value)", is it right?
Thank you.

Database and Web server is alive.
Please see the my error message above.
Error message : HTTP error : 500 Internal Server Error
SsfCreateProfile error while creating
/sapdb/home/nhccs/security/Z_T_KIM.pse rc=24
Also I hope someone answer to my other questions.
Another questions :
Q1. Creating a repository, I might use IP address or hostname for HTTP Server?
Q2. (t-code CSADMIN)Setting tab, the first field "Content Storage Host". I want to user my content server to store contents so that I input the IP address instead of "localhost(default value)", is it right?
Thank you in advance.

HTTP Error 500.0 with CF 9 & IIS 7.5 32 bit enabled web app

Hello !
I have recently installed CF 9 64 bit on Windows Server 2008 Standard Edition R2 with IIS 7.5. I have just set the 'Enable 32 bit applications' option on the application pool settings to 'true' for one of the sites as I have some web pages that make use of a 32 bit COM DLL. I originally had this option set to 'false' and all of the web pages in my site were being served fine with the exception of the ones making use of the 32 bit COM DLL.
The details on the error message from IIS are as follows:
HTTP Error 500.0 - Internal Server Error
Detailed Error Information:
Module: IsapiModule
Notification: ExecuteRequestHandler
Handler: AboMapperCustom-75500
Error Code: 0x800700c1
Most Likely causes:
IIS received the request; however, an internal error occurred during the processing of the request. The root cause of this error depends on which module handles the request and what was happening in the worker process when this error occurred.
IIS was not able to access the web.config file for the Web site or application. This can occur if the NTFS permissions are set incorrectly.
IIS was not able to process configuration for the Web site or application.
The authenticated user does not have permission to use this DLL.
The request is mapped to a managed handler but the .NET Extensibility Feature is not installed.
Things you can try:
Ensure that the NTFS permissions for the web.config file are correct and allow access to the Web server's machine account.
Check the event logs to see if any additional information was logged.
Verify the permissions for the DLL.
Install the .NET Extensibility feature if the request is mapped to a managed handler.
Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click here.
I am not sure if the error is permissions related or not.
1. How do I rectify this error and still keep the 'Enable 32 application' option turned on so I can call a 32 bit COM DLL ?
2. In general, can the 64 bit version of CF 9 even invoke 32 bit COM DLL's on IIS 7.5 or should this only be done with the 32 bit version of CF 9 ?
I would appreciate any help.
Thank you.

Here is the info:
http://helpx.adobe.com/coldfusion/kb/coldfusion-security-hotfix-apsb12-15.html
See notes section 5
CF9.0.2 came out with apsb12-15 applied.
Difference with CF10 is you can use CFadmin to change postparamlimit setting.
Cheers, Carl.

Server Internal Error 500

Hi!! I have problems, when I execute http://localhost:7501/tools, and the login is administrator.My Error is:Server Internal Error 500 Thanks.

Hi!!
I include my weblogic.log
Thanks for you help !!!
"Michael Girdley" <----> escribió en el mensaje
news:3a96e5cc$[email protected]..
>
>
You should check the server log and console to see what's happening.
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"Erika Astorga" <[email protected]> wrote in message
news:3a944274$[email protected]..
Hi!! I have problems, when I execute http://localhost:7501/tools, and
the
login is administrator.My Error is:Server Internal Error 500 Thanks.
[error.txt]

Exceptions & HTTP Error 500

I noticed that weblogic web services layer sends a http error 500 back when exceptions are thrown form an EJB.
Anyone know how to control the http error so it is 200 instead of 500.
Thanks,
-Tony

Ramesh
The 500 error I guess is due to a miss correlation, sending wrong data to the server making it crash.
You can record JavaScript files by editing the proxy filter:
View -> OpenScript Preferences -> Record -> HTTP module (or Sieble) -> Change to URL Filters tab; you can add edit remove filters from there.
Regards
Alex

How can we put file in Content Server (HTTP)

Hi
I have PDF file or Text file which i had to place a in Content Server( HTTP ).
please tell me is there any program to place fiel.
Thanks
Sontosh

You cannot do this through the database. The database server knows nothing about your client PC and cares even less. What you want to do can be done via a straight OS command like FTP. If you want to automate this you'll have to do it through the client.
There are many ways to do it, it depends on your client environment. For insatnce, I'm currently on a project that uses Java to turn client PC files into bitstreams and then inserts them as CLOBs into a database table. Doing something similar in Forms should be a piece of cake with the D2KWUTIL library. Alternatively you could use HOST to initiate a FTP session.
Rgds, APC

Content Server HTTP Error 500

Similar Messages

Maybe you are looking for