Content Server not working after 5.0.2 upgrade

We upgraded the plumtree to 5.0.2. After upgrade, content server portlets not working properly. When I publish my portlet, Interface says it is published, HTML file generated at the published location, but log says
com.plumtree.search.UnknownTypeException: IndexManager.enqueue() : Could not find PTDocMaker for key PTCONTENT
Portlet displays
Error: No Url is available for this portlet. It may not have been published.
Any Idea ?

Hi Ravi, from the Release Notes for Content Server 5.0.2, there's this note "Publish Dialog does not show any error when search index fails but an error "com.plumtree.search.UnknownTypeException: IndexManager.enqueue() : Could not find PTDocMaker for key PTCONTENTTEMPLATE" is recorded in pcs.log. (Issue #27541) "
So you should make sure that the search server is running (just by doing a banner search). Assuming that's fine (it probably is), the likely culprit is an installation problem. Check the Content Server pcs.log file (located in PT_HOME\ptcs\5.0\settings\logs) for any error messages related to search api initialization. This cryptic error you're observing occurs when the search api initialization fails for some reason, the error is not gracefully caught and surfaced to the user. The pcs.log file may give a clue.

Similar Messages

TS2621 why my outgoing mail server not working after ios 6 upgraded

why my outgoing mail server not working after ios 6 upgraded

Ask your carrier to send you the settings over wifi and then install them that way.
I'm on giffgaff and I used the giffgaff app from the store to sort this out.
Overall though I must say Apple has let itself down on this as why isn't something written in the ios script that keeps the original settings??
Very Poor indeed and I held off using Apple products for years for this very reason!!

My laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade,

my laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade, driver on your website fails to setup at 83 % with an error message

Welcome to the HP Forums MillaMagia,
I see by your post that the USB isn't being recognized.
I can help you with this issue.
Are you using the same USB cable? (known good USB cable)
You want to use the normal USB slot 2.0 cable and not the latest USB 3.0.
USB 3.0 are supposed to be backwards compatible.
Try another USB port on the Laptop, some of the USB ports are more powered then others.
I have provided a document to see if the printer is partially recognized in the device manager, which is causing the printer not to be recognized again. (the uninstall from the CD should have removed the entry and the printer from the registry)
Leave the printer turned on and the USB cable connected directly to the computer and the printer's power cord directly into a wall outlet.
How do I get into Windows Device Manager?
Here is a document for Identifying problems in Windows Device Manager.
Check to see if there are any hardware driver conflicts, you might see a ! mark or a red x beside a device with a conflict or unknown device, look under universal serial bus controllers, look for USB printing support or mass storage device, delete the entry by right clicking and select uninstall, OK.
Let me know how it was listed. (screen shots welcome)
If this is a Laptop then check the power management settings.
Access the device manager. Windows 8-How do I access the Device Manager.
Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows the computer to limit or turn off power for this device.
Disconnect the USB, run the full uninstall and reinstall the printer software again.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

IMessage not working after iOS 5.1 upgrade! Feedback pls

iMessage not working after iOS 5.1 upgrade, anybody experiencing this as well? Feedback please......

You shouldn't have to hard restart and it shouldn't have anything to do with your router. If anyone else runs into this problem try resetting the network settings on your phone. All the steps to do this can be found here http://tekshot5.com/ios-5-1-imessage-fix/
Edit: Some of us don't have the option of resetting our DNS servers. I run my own for example for caching purposes.

7 u j m keys not working after 10.8.1 upgrade, late 2008 aluminum Macbook

That's all, these keys do not work after update/upgrade today. They were working fine right before i did the update and are not working now. If I hit the M ket a few times i do get some garbage. Help?

Thanks, but still the same. It boot normally only if there isn't any usb device attach to the computer. I'm using usb mouse instead of bluetooth mouse and it happens not to boot normally like usual.
The technician said it would be okay if any usb devices attach to the computer during the boot apparently it won't boot normally.
Any alternative sir?

A1: Home button not working after Ideapad A1 ICS upgrade

So yesterday I finally tried the ICS upgrade for my Ideapad A1. It worked OK besides all data on internal memory and SD being deleted so I had to reinstall all my apps or restore from Titanium backup.
In any case the only real problem is that the home button is not working after the upgrade. Does anybody else have this problem and maybe even a solution?
Thanks!

Hi, Im using A1 16G and tried to upgrade to ICS for couple of days i read too many articles in different forums....
Can you put any instruction on how you made it?
Thanks

Content Server not working correctly

Hello,
I am having problems with my Tandberg Content Server. For several years, we have used the Tandberg Content Server (TCS) in combination with our Tandberg Management Server (TMS) to schedule and record video conferences. I schedule 60 video conferences a week to roughly 20 rooms, using the TMS. Of these, about 14 video conferences per week are recorded.
Originally, I only had one recording alias on the TCS set up, and it worked fine. But I recently added a second recording alias, due to the growing number of requests for recordings of the video conferences. It seemed to go okay.
Now, however, the Content Server isn't working quite right. It will record two different video conferences at the same time, but once it's finished encoding them, the link that you get to send to people is messed up: often (but not always) the link merges two seperate video conferences together in one video. Two one-hour video conferences will be merged together in one two-hour recorded conference.
The problem only occurs with video conferences that occur at the same time. Strangely, if I search the Content Server's F drive, under Data/Media, the recordings are all there, and they are seperate. They are only joined together on the Content Server link.
I have made sure that we are indeed recording on seperate recording aliases.
Because the videos in the Data/Media bin are always labled something like O1110292903-0593923929.wmv, I can use guesswork to reconstruct a valid URL to get a working link, but it's a lot of extra work: I want to be able to log in to the Content Server admin interface and be able to send someone a link in a few minutes.
Any ideas on what's going wrong? I created a trouble ticket with Cisco earlier in the week, but have not heard back from Cisco tech support, so I thought I'd open it to the Cisco community.

HI Ron. Good morning. Since our webex the last time, I do believe we can use participant templates in the mean time until we find out whats going on when using TMS this way. When using the recording drop down and all the systems aren't registered to Gatekeeper seems to be the trigger here, but to get you running, this is what I propose we try and do here.
You may have to purge the Content Server out of TMS so TMS doesn't "know" about the IP address of the Content Server.
You will have to examine your routing and preferred MCU in routing here, and make the two changes:
Administrative Tools>Configuration>Conference Settings. All the way at the bottom you will see:
I had to change this to Always and Preferred MCU type in routing to MPS. This is logical since this is the only MCU you have and you need the MCU in each booking (from my understanding of what you said during the webex).
So:
1) Jot down all the conferences that have the Content Server involved, and remove the recording from each conference.
2) Purge the Content Server from TMS.
3) Add participant template with just the IP address of the content server: Booking>Participant Templates and build one like shown below. The number field should be the address of the content server and IP zone should be IP zone for your system.
Go ahead and save the template.
Make booking with this template and another endpoint (don't add the MPS since it should automatically). Check the connection settings and the MPS should be call the IP of the TCS and the other endpoint.
Click Save conference.
If the conference saves ok, build another with a different room and same template again, and click save conference.
The caveat is that when calling the IP of the TCS, the TCS will use what you have configured as the default recording template under Configuration>Site Settings
Just choose which one you want to use all the time if you can.
The way it shows on the TCS is:

ICal server not working after restore

Short version:
I did a clean install on my server. Restored the users & groups and the Library/CalendarServer folder.
I CAN browse my calendar data by going to http://[mydomain]:8008/ in Safari, even drilling right down to individual events.
But iCal, while it seems to login correctly and I don't get any errors, doesn't show any calendars.
Here's the long story with a bit more detail...
1. got my new server (yay!)
2. calendar server was working great
3. three users had multiple calendars, and we shared them with eachother
4. for reasons unrelated to iCal, I decided to do a clean install.
5. first I did an "ASR" backup using terminal - to an external hard drive
6. reinstalled Mac OS X Server version 10.5 (forgot to run software update at this point)
7. re-entered the users and groups manually, but I was careful to make sure they had the same UID's
8. used cp command to copy the collaboration folder back from the backup, as well as the CalendarServer folder.
9. after much difficulty, finally got the wiki server working again
10. iCal clients could still browse their own calendars (I guess they are cached locally), but were unable to connect to the server (login errors).
11. realized that I hadn't run software update. I ran it. now running 10.5.3
12. minor glitch with wikis is now solved... yay!
13. calendars disappear from all iCal clients when they attempt to connect to server... doh!
14. and here I am.

The current permission on /Library/CalendarServer/Documents are as follows.
drwxr-x---@ 2 _calendar admin 68 Jun 30 23:38 Documents
WebDAV:{DAV:}acl 136
Here's the error log when I restart iCal server.
I put the whole error messages below.
2008-07-02 22:46:21+0900 [-] [caldav-8009] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
2008-07-02 22:46:21+0900 [-] [caldav-8009] [OpenDirectoryService] Record disabled due to conflict: <OpenDirectoryRecord[users@058167af-ace8-519a-ac3d-e166498db024(/Search->/Local /Default)] FFFFEEEE-DDDD-CCCC-BBBB-AAAA00000000(root) 'System Administrator'>
2008-07-02 22:46:21+0900 [-] [caldav-8009] [OpenDirectoryService] Record disabled due to conflict: <OpenDirectoryRecord[users@058167af-ace8-519a-ac3d-e166498db024(/Search->/LDAPv 3/127.0.0.1)] AC15322C-17CF-4D75-B373-2A7F6870FB30(root) 'System Administrator'>
2008-07-02 22:46:21+0900 [-] [caldav-8009] [OpenDirectoryService] Record disabled due to conflict: <OpenDirectoryRecord[users@058167af-ace8-519a-ac3d-e166498db024(/Search->/Local /Default)] 085BBC63-F7F4-4C66-851B-97BA5670DA12(yoshi) 'Yoshi Sawada'>
2008-07-02 22:46:21+0900 [-] [caldav-8009] [OpenDirectoryService] Record disabled due to conflict: <OpenDirectoryRecord[users@058167af-ace8-519a-ac3d-e166498db024(/Search->/LDAPv 3/127.0.0.1)] ECD1F7F7-64D5-4188-BB5A-2F5FDC63CADB(yoshi) 'Yoshi Sawada'>
2008-07-02 22:46:21+0900 [-] [caldav-8009] [OpenDirectoryService] Reloading groups record cache
2008-07-02 22:46:21+0900 [-] [caldav-8010] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
2008-07-02 22:46:21+0900 [-] [caldav-8010] [OpenDirectoryService] Record disabled due to conflict: <OpenDirectoryRecord[users@058167af-ace8-519a-ac3d-e166498db024(/Search->/Local /Default)] FFFFEEEE-DDDD-CCCC-BBBB-AAAA00000000(root) 'System Administrator'>
2008-07-02 22:46:21+0900 [-] [caldav-8010] [OpenDirectoryService] Record disabled due to conflict: <OpenDirectoryRecord[users@058167af-ace8-519a-ac3d-e166498db024(/Search->/LDAPv 3/127.0.0.1)] AC15322C-17CF-4D75-B373-2A7F6870FB30(root) 'System Administrator'>
2008-07-02 22:46:21+0900 [-] [caldav-8010] [OpenDirectoryService] Record disabled due to conflict: <OpenDirectoryRecord[users@058167af-ace8-519a-ac3d-e166498db024(/Search->/Local /Default)] 085BBC63-F7F4-4C66-851B-97BA5670DA12(yoshi) 'Yoshi Sawada'>
2008-07-02 22:46:21+0900 [-] [caldav-8010] [OpenDirectoryService] Record disabled due to conflict: <OpenDirectoryRecord[users@058167af-ace8-519a-ac3d-e166498db024(/Search->/LDAPv 3/127.0.0.1)] ECD1F7F7-64D5-4188-BB5A-2F5FDC63CADB(yoshi) 'Yoshi Sawada'>
2008-07-02 22:46:21+0900 [-] [caldav-8010] [OpenDirectoryService] Reloading groups record cache
2008-07-02 22:46:21+0900 [-] [caldav-8009] [OpenDirectoryService] Record disabled due to conflict: <OpenDirectoryRecord[groups@058167af-ace8-519a-ac3d-e166498db024(/Search->/Loca l/Default)] ABCDEFAB-CDEF-ABCD-EFAB-CDEF00000050(admin) 'Administrators'>
2008-07-02 22:46:21+0900 [-] [caldav-8009] [OpenDirectoryService] Record disabled due to conflict: <OpenDirectoryRecord[groups@058167af-ace8-519a-ac3d-e166498db024(/Search->/LDAP v3/127.0.0.1)] 43992045-BA1E-4682-AA5A-B31399286CB1(admin) 'Open Directory Administrators'>
2008-07-02 22:46:21+0900 [-] [caldav-8009] [OpenDirectoryService] Record disabled due to conflict: <OpenDirectoryRecord[groups@058167af-ace8-519a-ac3d-e166498db024(/Search->/Loca l/Default)] ABCDEFAB-CDEF-ABCD-EFAB-CDEF00000014(staff) 'Users'>
2008-07-02 22:46:21+0900 [-] [caldav-8009] [OpenDirectoryService] Record disabled due to conflict: <OpenDirectoryRecord[groups@058167af-ace8-519a-ac3d-e166498db024(/Search->/LDAP v3/127.0.0.1)] 7C4DCA43-EB34-407A-B91D-466416929AFD(staff) 'Open Directory Users'>
2008-07-02 22:46:21+0900 [-] [caldav-8009] [OpenDirectoryService] Reloading locations record cache
2008-07-02 22:46:21+0900 [-] [caldav-8010] [OpenDirectoryService] Record disabled due to conflict: <OpenDirectoryRecord[groups@058167af-ace8-519a-ac3d-e166498db024(/Search->/Loca l/Default)] ABCDEFAB-CDEF-ABCD-EFAB-CDEF00000050(admin) 'Administrators'>
2008-07-02 22:46:21+0900 [-] [caldav-8010] [OpenDirectoryService] Record disabled due to conflict: <OpenDirectoryRecord[groups@058167af-ace8-519a-ac3d-e166498db024(/Search->/LDAP v3/127.0.0.1)] 43992045-BA1E-4682-AA5A-B31399286CB1(admin) 'Open Directory Administrators'>
2008-07-02 22:46:21+0900 [-] [caldav-8010] [OpenDirectoryService] Record disabled due to conflict: <OpenDirectoryRecord[groups@058167af-ace8-519a-ac3d-e166498db024(/Search->/Loca l/Default)] ABCDEFAB-CDEF-ABCD-EFAB-CDEF00000014(staff) 'Users'>
2008-07-02 22:46:21+0900 [-] [caldav-8010] [OpenDirectoryService] Record disabled due to conflict: <OpenDirectoryRecord[groups@058167af-ace8-519a-ac3d-e166498db024(/Search->/LDAP v3/127.0.0.1)] 7C4DCA43-EB34-407A-B91D-466416929AFD(staff) 'Open Directory Users'>
2008-07-02 22:46:21+0900 [-] [caldav-8010] [OpenDirectoryService] Reloading locations record cache
2008-07-02 22:46:21+0900 [-] [caldav-8009] [OpenDirectoryService] Reloading resources record cache
2008-07-02 22:46:21+0900 [-] [caldav-8010] [OpenDirectoryService] Reloading resources record cache
2008-07-02 22:46:21+0900 [-] [caldav-8009] [startup] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
2008-07-02 22:46:21+0900 [-] [caldav-8009] [startup] Setting up document root at: /Library/CalendarServer/Documents
2008-07-02 22:46:21+0900 [-] [caldav-8009] [startup] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
2008-07-02 22:46:21+0900 [-] [caldav-8010] [startup] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
2008-07-02 22:46:21+0900 [-] [caldav-8010] [startup] Setting up document root at: /Library/CalendarServer/Documents
2008-07-02 22:46:21+0900 [-] [caldav-8010] [startup] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
2008-07-02 22:46:21+0900 [-] [caldav-8010] [startup] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
2008-07-02 22:46:21+0900 [-] [caldav-8010] [startup] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
2008-07-02 22:46:21+0900 [-] [caldav-8009] [startup] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
2008-07-02 22:46:21+0900 [-] [caldav-8009] [startup] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
2008-07-02 22:46:21+0900 [-] [caldav-8010] [startup] Setting up default ACEs on root resource
2008-07-02 22:46:21+0900 [-] [caldav-8010] [-] Setting up AdminPrincipals
2008-07-02 22:46:21+0900 [-] [caldav-8010] [-] Setting root ACL
2008-07-02 22:46:21+0900 [-] [caldav-8009] [startup] Setting up default ACEs on root resource
2008-07-02 22:46:21+0900 [-] [caldav-8009] [-] Setting up AdminPrincipals
2008-07-02 22:46:21+0900 [-] [caldav-8009] [-] Setting root ACL
2008-07-02 22:46:21+0900 [-] [caldav-8009] [startup] Setting up Timezone Cache
2008-07-02 22:46:21+0900 [-] [caldav-8009] [startup] Configuring authentication for realm: /Search
2008-07-02 22:46:21+0900 [-] [caldav-8009] [startup] Setting up scheme: kerberos
2008-07-02 22:46:21+0900 [-] [caldav-8010] [startup] Setting up Timezone Cache
2008-07-02 22:46:21+0900 [-] [caldav-8010] [startup] Configuring authentication for realm: /Search
2008-07-02 22:46:21+0900 [-] [caldav-8010] [startup] Setting up scheme: kerberos
2008-07-02 22:46:21+0900 [-] [caldav-8010] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
2008-07-02 22:46:21+0900 [-] [caldav-8010] [startup] Could not start Kerberos
2008-07-02 22:46:21+0900 [-] [caldav-8010] [startup] Setting up scheme: digest
2008-07-02 22:46:21+0900 [-] [caldav-8009] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
2008-07-02 22:46:21+0900 [-] [caldav-8009] [startup] Could not start Kerberos
2008-07-02 22:46:21+0900 [-] [caldav-8009] [startup] Setting up scheme: digest
2008-07-02 22:46:21+0900 [-] [caldav-8009] [-] Configuring authentication wrapper
2008-07-02 22:46:21+0900 [-] [caldav-8009] [-] Setting up service
2008-07-02 22:46:21+0900 [-] [caldav-8009] [startup] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x146c6b0>
2008-07-02 22:46:21+0900 [-] [caldav-8009] [startup] Adding server at 127.0.0.1:8009
2008-07-02 22:46:21+0900 [-] [caldav-8009] [-] twisted.web2.channel.http.HTTPFactory starting on 8009
2008-07-02 22:46:21+0900 [-] [caldav-8009] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14687b0>
2008-07-02 22:46:21+0900 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
2008-07-02 22:46:21+0900 [-] [caldav-8009] [-] set uid/gid 93/93
2008-07-02 22:46:21+0900 [-] [caldav-8009] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
2008-07-02 22:46:22+0900 [-] [caldav-8010] [-] Configuring authentication wrapper
2008-07-02 22:46:22+0900 [-] [caldav-8010] [-] Setting up service
2008-07-02 22:46:22+0900 [-] [caldav-8010] [startup] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x146c6b0>
2008-07-02 22:46:22+0900 [-] [caldav-8010] [startup] Adding server at 127.0.0.1:8010
2008-07-02 22:46:22+0900 [-] [caldav-8010] [-] twisted.web2.channel.http.HTTPFactory starting on 8010
2008-07-02 22:46:22+0900 [-] [caldav-8010] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14687b0>
2008-07-02 22:46:22+0900 [-] [caldav-8010] [-] set uid/gid 93/93
2008-07-02 22:46:22+0900 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
2008-07-02 22:46:22+0900 [-] [caldav-8010] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
2008-07-02 22:51:35+0900 [-] [caldav-8009] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd-pydir.sock'))
2008-07-02 22:51:35+0900 [-] [caldav-8009] [OpenDirectoryService] Faulting record yoshi into users record cache
2008-07-02 22:51:35+0900 [-] [caldav-8009] [OpenDirectoryService] Record disabled due to conflict: <OpenDirectoryRecord[users@058167af-ace8-519a-ac3d-e166498db024(/Search->/Local /Default)] 085BBC63-F7F4-4C66-851B-97BA5670DA12(yoshi) 'Yoshi Sawada'>
2008-07-02 22:51:35+0900 [-] [caldav-8009] [OpenDirectoryService] Record disabled due to conflict: <OpenDirectoryRecord[users@058167af-ace8-519a-ac3d-e166498db024(/Search->/LDAPv 3/127.0.0.1)] ECD1F7F7-64D5-4188-BB5A-2F5FDC63CADB(yoshi) 'Yoshi Sawada'>
2008-07-02 22:51:35+0900 [-] [caldav-8009] [AMP,client] Could not find the principal resource for user id: yoshi

Mail server not working after upgrade

After a few hours, my server finally came back up however mail is not working.
In the /var/log/mail.log I see many error messages related to the same thing from Postfix whenever an inbound mail is recieved.
May 24 06:26:22 my.server.com postfix/postscreen[25712]: CONNECT from [62.13.138.73]:64283 to [192.168.0.3]:25
May 24 06:26:22 my.server.com postfix/postscreen[25712]: fatal: error seeking /Library/Server/Mail/Data/mta/postscreen_cache.db: Invalid argument
May 24 06:26:23 my.server.com postfix/master[54]: warning: process /usr/libexec/postfix/postscreen pid 25712 exit status 1
Help!

I'd guess that the postscreen database is missing or corrupt.
please issue the following Terminal.app commands:
postconf -n -c /Library/Server/Mail/Config/postfix/ | grep -i postscreen
postconf -c /Library/Server/Mail/Config/postfix/ | grep -i postscreen
and anonymize the output if and as desired.   If you anonymize, please consistenty replace the domain portion of your URL(s) to example.com, example.net and/or example.org (these are RFC-reserved bogus domains) and replace the server's host name to something else if that's more sensitive than "mail" or "www" or "server" — consistency in these changes is important — and alter any IP addresses included (other than 127.0.0.1 / localhost) to 10.20.30.40 (or some other private IP address — again, consistency in these changes is important — and then post that output here.
Before making any changes, get a complete system backup or two, on an external disk. That's your path back if something here goes badly wrong, weird or otherwise untoward.
Once there are complete backups and entirely as a test / guess / experiment, I'd look to rename an existing postscreen database out of the way and see if a new cache database gets created, and would also check the file ownerships and protections of the files in that area.
$ sudo ls -ale@ /Library/Server/Mail/Data/mta/
Password:
total 48
drwxr-x---   5 _postfix mail     170 Jan 30 15:20 .
drwxr-xr-x 13 root      wheel    442 Jan 28 10:57 ..
-rw-------   1 _postfix mail      33 May 5 16:08 master.lock
-rw-------   1 _postfix mail   16384 May 24 08:22 postscreen_cache.db
-rw-------   1 _postfix mail    1024 May 24 10:04 prng_exch
$
The two files that are most interesting in the above are the . and postscreen_cache.db files.
There is also an upgrade log around, and you'll definitely want to have a look in that — to see what (else?) went wrong here. (Off the top, I don't recall the name of the upgrade log file. In recent releases, it's usually something like /var/log/install.log — also check the system logs for "upgrade" messages.)

Lauch archiver for content server not working

Hello All,
we have running content server 11gr1 on one box and need to migrate all its strunture and content to newly installed box. (same db + app version is installed here)
for 'meta data migration" I have done it through 'Content Migration Utility’.
Now I have to 'migrate content using archiver'
when I logged into console
Go to ‘Administration ->Admin Applets’. Then click on ‘Archiver’
getting below error:
basic: Exception: java.lang.ClassNotFoundException: IntradocApp.class
network: Cache entry not found [url: http://test.oracle.net:16200/cs/common/IntradocApp.class, version: null]
network: Connecting http://test.oracle.net:16200/cs/common/IntradocApp.class with proxy=DIRECT
network: Cache entry not found [url: http://test.oracle.net:16200/cs/common/IntradocApp/class.class, version: null]
network: Connecting http://test.oracle.net:16200/cs/common/IntradocApp/class.class with proxy=DIRECT
load: class IntradocApp.class not found.
java.lang.ClassNotFoundException: IntradocApp.class
    at sun.applet.AppletClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadCode(Unknown Source)
    at sun.applet.AppletPanel.createApplet(Unknown Source)
    at sun.plugin.AppletViewer.createApplet(Unknown Source)
    at sun.applet.AppletPanel.runLoader(Unknown Source)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
basic: Exception: java.lang.ClassNotFoundException: IntradocApp.class
Please suggest for the same.
Thanks in ADV.

Are you really in the domain home ??
With the bin directory (under cs), you shoud see custom, classes, config, etc. directories.
......APPLS\MW\user_projects\domains\YOUR_DOMAIN\ucm\cs
You need to export your data on the source server and then do the import on the target server.
You could have a look on the documentation : http://docs.oracle.com/cd/E21764_01/doc.1111/e10792/c06_migration.htm
Romain.

Connection Server : Launch Archiver for Content Server not working

Hi All,
I have configured the Outbound adapter on the connection server.
Now when i try to create an offer with Content Server as content source and go to the next page and try clicking the Launch Archiver it gives an error saying the Applet cannot be initialized.
Please help.
Thanks-
Sahil Gupta

Hi all,
The machine where we have installed the Content Server and the Connection Server has a jdk1.5 version and when I try accessing the the Connection Server Administration page from a different machine with jdk 1.6 version installed i am getting an java.lang.ClassNotFoundException: IntradocApp.class exception.
Please help
Noel

Messages not working after 10.9.2 upgrade - XPCIMDMessageStoreSendXPCMessage fails

I have upgraded five machines to 10.9.2, but one of them has run into a persistent problem with messages.
On startup, I get a Message that an internal error has ocurred and asks me to relaunch. After that the window comes up and the acount window shows me logged in, but the history is not updated and new messages take forever to deliver or do not go through at all. They usually do not update on the local display.
The console log shows lot of failures like these:
- 2/27/14 6:33:44.954 PM imagent[371]: [Warning] __XPCIMDMessageStoreSendXPCMessage failed too many times...bailing!
I have set up another account and tried logging in from it, but it shows the same behavior.
The firewall is off, certificate seem to be fine. When I log out and back in, the other systems devices get all the nag messages about the system and numbers being added, so it is communicating with the server. But messages are not coming through.
I have cleared all preferences and caches, but the behavior does not change.
I have reverted the system to 10.9 by installing over it. Messages immediately works fine (same preferences etc.) Everything works great, but I'd rather not live with the SSL bug.
I have upgraded using the Combo Update and another time using the App Store. The behavior stays the same.
The other four machines and my 4 iOS devices are all working as expected.
Does anybody have any ideas? My family and friends use Messages a lot, so I need it on my main machine.
Thanks,
-- Harald

Hi,
I will presume again then.
I would also try these one at a time. Doing it this way is less invasive than doing them altogether.
The Console Message looks more like it belongs to an iMessage sending than an AIM, Jabber or Yahoo ones.
In this case I would try deleting com.apple.imessages.bag.plist
This is not the Account info for iMessages but it is the server the app (and IMAgent) connect to.
If that does not work I would try the iMessages account one (com.apple.ids.service.com.apple.madrid.plist)
This is the one in use in Mavericks.
You may still have the Mountain Lion one present (com.apple.imservice.iMessage.plist)
You could try using Activity Monitor to Force Quit IMAgent but you first need to turn Off FaceTime even if it is not open (IMAgent does it's "Listening" as well as for the Messages app.
It goes without saying the Messages app should also be Quit.
I would again restart the computer when Quit the IMAgent app.
7:22 pm Saturday; March 1, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Open Dataset for input in BINARY MODE not working after ECC 6.0 upgrade

Hi All,
Our requirement is to download an XML file from the application server and there is a customized program to download these files.
This program uses the statement, Open dataset ...for input in BINARY MODE
and it works perfect for 4.7. There were no issues. But, after the upgrade to ECC 6.0 this does not work.
When the data is read in ECC 6.0 , it is shown in some special characters and it could not be opened with XML editor and the file is not completely downloaded. I read through the forum and tried the following statement as well,
Open dataset....for input in LEGACY BINARY MODE.
After this statement, there were no special characters, but there is a blank space introduced before every character.
Example : TEST(actual)
T E S T (After the legacy binary mode)
Could you please let me know if there is any solution to rectify this problem. Appreciate your help.
Thanks a million.
Edited by: Manikd on May 12, 2011 3:52 PM

But this program was already using BINARY MODE and after upgrade this is not working. I know, it may work in TEXT MODE. However, I cannot change the whole program to TEXT mode now.

MSI GS70 20D Touchpad not working after login when I upgraded to 8.1

Short situation: I upgraded my laptop to windows 8.1, and the touchpad stopped working on the start/desktop screens. I could move it before I logged in, and after it would work for a few seconds, but then it would just stop. An external mouse works just fine, but I still don't want my touchpad not working.
I looked on the MSI USA technical support page, and it said to delete the old drivers for the touchpad and download new ones. I deleted the drives, but every time I try to download the new ones, I get a window that says my touchpad isn't plugged in, and that the drive isn't compatible with my touchpad, which doesn't make sense to me because I looked up my product specifically and tried all three touchpad drivers. None of them worked.
Now I can't use the touchpad at all because I deleted the drivers, so it would seem that the computer doesn't know it has a touchpad because it won't register the touchpad in my devices tab.
Does anyone know what I can do to solve this? Or to at least get the touchpad to register again? I just got this computer for Christmas, I've treated it very well so it hasn't banged up against anything or been dropped or mistreated, so I cannot understand why this is happening. It worked before the 8.1 update, so I'm pretty sure the issue has something to do with that.

UPDATE: So I managed to fix the touch pad by deleting the driver and rebooting, which is weird because I removed the driver completely and never reinstalled it, so the computer shouldn't really know it has a touch pad. But every time I reboot the computer after fixing it, the touch pad goes back to it's old problem and I need to redelete and reboot all over again.
Also, My computer has begun to randomly freeze and not respond to anything, with one such event leading to a blue screen with a WHEA_UNCORRECTABLE_ERROR message. The computer has frozen a total of 6 times, at different moments; when I'm typing on microsoft word, at the login screen, even right when it starts up and the msi loading screen is up. 5 of these times have required a forced shut down, the first time the computer shut off on it's own because it ran out of battery power.
Finally, my computer has begun to periodically for long stretches of time stopped detecting wireless networks and is asking to be plugged into an ethernet cable to connect to the internet. This has never happened to me before, and I know I haven't turned off my network sharing center.
I'm not sure why this is all suddenly happening. It's not like I'm banging my laptop against walls. I'm very careful when I move and use my GS70, so these problems are greatly concerning to me because I just got this computer at Christmas.

GPS not working after froyo 2.2 upgrade

I upgraded to froyo 2.2 yesterday and since then my GPS won't work. The only way I can get it to work is to turn GPS on, power off/on my phone, then the GPS will work when the phone is first powered back on. If I turn off the GPS off and then try it again later, it won't work again. I don't normally leave GPS turned on because it drains the battery too fast, but now I have to restart my phone any time I want to use GPS?!?!?

OK. Not just me then. I have 3 Fascinates since last Sept. First couple months, none of the 3 GPS would work.
Then after first verizon patch/upgrade, all 3 worked better. Then after 2nd and finally 3rd EA28, GPS worked
GREAT on all 3 phones. Been working great since the EA28 upgrade.
Yesterday, 2 of the 3 got their Froyo 2.2 upgrade.
Now, the GPS on both of them quit working again. They either never get a signal lock or take over 20 minutes to get one
and IF they do, its a once a day event.
The one that didnt yet receive its 2.2 update, its GPS is still working fine. ( though I'm sure it will quit post update as well).
Since all 3 worked great last 4 or 5 months, I can only assume the gps radios in all 3 are fine and this is some kind
of Android bug. ( i've seen similiar posts in other forums for other phones after gettting various android updates. )
So, $64,000 question for Verizon, Samsung or whomever: How do I fix this now and keep it fixed ??
( I've cleared all cache data I can find, turned off/on, removed battery turned off/on ...Nothing helps on either phone.)
I have not yet tried a 'factory reset' , though I could on 1 of the 2 phones.
Thanks.

Content Server not working after 5.0.2 upgrade

Similar Messages

Maybe you are looking for