Content Server Settings not working (for PPM)

Hi,
We are on PPM5.0.
We have set up the Content Server settings according to the PPM
configuration guide.
We, however, still see the documents (uploaded in the project) showing
up on the PPM Server.
We checked the entries in table CFF_CONT (in the PPM server), and see
the contents updating when a document is uploaded. This makes us
conclude that the documents are still not being stored on the Content
Server.
Any switch/flag that needs to be set/reset in the WAS and/or Content Server that'll help??
Or anything else...???
Thanks.

Earl Powers BSR2751547 Thank you all. your suggestions really helped.

Similar Messages

New server settings not working - temporary Verizon problem

I was having a lot of problems connecting with email, and did an online chat. I was told that they are having problems with the new pop and smtp server settings. He told me to change them back to the old incoming and outgoing, but keep the new ports. This fixed my problems. He said the new server settings should be working again within 24 hours.

BillSamuel wrote:
Now incoming and outgoing are not working, and pop and smtp are. I don't know how many times we will have to go back and forth among these settings. But if you can't connect the one way, you probably can the other way. This transition is not going well. Ideally, there should be a period of transition in which either will work, but instead it's going back and forth.
Maybe the problem is only on certain Verizon email servers. I am in VHO 1 (North Texas) and have been using these new pop/smtp settings for many weeks, not a single failure. And before that the incoming/outgoing settings for probably a year or more, again, no problems. This is on both Windows Live Mail and Thunderbird.
If people would put their location (preferably VHO, but state and/or town would be better than nothing) in their profile here, or include the info in their posts, it might help identify when problems are regional or location dependent. As it is now, when people just post that something doesn't work, and someone else says it does, there is no way for anyone to help or see a pattern. Just a thought.....
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.1
Keller, TX 76248 (VHO 1)

Content Server URL not working.Win2008-MAXDB 7.6.06.20-IIS7

Hello Experts,
I have installed Content Server 6.4 successfully on WIN2K8 with IIS7 and MAXDB 7.6.6.20
When i tried to access the content server url, i was prompted with a POP UP asking for download of ContentServer.dll.
I have strictly followed the installation guide -CONTENTSERVER on WIN 2008 and installed all the necessary roles mentioned in the installation guide.I have also checked the option - install website during my installtion.but still facing the issue while accessing content server URL.
While going through SDN forums, in some of the threads, it was mentioned that manual installation of content server website has resolved the issue.
Could any one please let me know the procedure to be followed for manual installation of content server website to the port manually.
Or
Kindly suggest the solution for this, if you have come across the similar issue.
Thanks & Regards,
Sriram Pingali

Hi,
I have installed Content Server 6.4 successfully on WIN2K8 with IIS7 and MAXDB 7.6.6.20
When i tried to access the content server url, i was prompted with a POP UP asking for download of ContentServer.dll.
1) Firstly check whether you have installed all the components pertaining to IIS 7.0 in your system
2) Check whether you have allowed contents like *.dll in the IIS
Hope this helps.
Regards,
Deepak Kori

BI Publisher configured with BI Server Security not working for the admins.

Hello Everyone,
I have configured the BI publisher to work with the BI server security. Everything is working well with the exception that all users part of the BI Server "Administrators" group are unable to login and get the following error message (message displayed below). If a user is removed from the "Administrators" group then they are able to access the BI Publisher. As indicated everything else is working for exemple all users part of the 'XMLP_Admin' group all have access to the "ADMIN" tab in BI Publisher. The issue seems to be limited to the users part of the BI Server "Administrators" group.
- Has anyone else ever had this issue?
- Is this a normal behaviour of BI Publisher?
- Or the security groups for the BI Server and BI Publisher conflicting?
Thanks in advance for everyone's help.
Best regards,
FBELL
*********************** Error Message ***************************************
Oracle BI Publisher Enterprise
Reporting Login: Login failed: Please contact administrator for your username/password.
Error Details
Error Codes:
***************************************************************************

Thanks Madan for your help.
The group XMLP_Admin was already created and working. The conflict was with security groups outside BI Publisher. What I ended up doing was recreating the principals.xml and security.xml files and rsetting the roles and permissions. Surprisingly that fixed my problem.
Best regards,
FBELL.

DNS Server settings not working as expected ....?

Greetings
I have our load balancer/firewall setup to where if someone enters a hostname like (www.example.com) it points it to a local server at 10.0.1.2
When logged into the network, the DNS Server that pulls up is 10.0.1.1 (IP of firewall), which is fine, but I also have the two openDNS servers at the 2nd and 3rd slots manually entered.
If the opendns servers are listed, the ping returns the public IP of www.example.com, but if removed, it does the right thing and pings the internal IP address.
Even though the 10.0.1.1 DNS server setting is first, it doesn't seem to use that setting when you have DNS servers entered manually.... any idea why and how to make this stop?
I prefer to leave the opendns settings in the DNS server settings (for when I'm switching around to various networks) ...

Quick update. Added to a previously filed bug. Looks like it's assigned now so maybe we'll see a fix for this soon.
https://bugzilla.mozilla.org/show_bug.cgi?id=563169

GoPro Camera Raw Lens Profile settings not working for image sequence in Photoshop/AE/Premiere CS6

Hey Everyone,
I'm in need of assistance in either Photoshop CS6, After Effects CS6, or Premiere Pro CS6. I just installed the trials after seeing Russell Brown demo the GoPro Lens Profile correction feature in Camera Raw. Basically what I'm looking to do is make adjustments (in Adobe Camera Raw) to a series of still images (shot with the time-lapse mode on the GoPro) and then either export those stills through Photoshop or Bridge to a temporary movie file that will be imported into a timeline (with other video clips), or import the JPG files (with Camera Raw settings) directly into After Effects or Premiere as an image sequence. The latter would be preferable as it'd avoid the extra step of having to render the intermediate/temporary movie file.
Right now, my current workflow for GoPro time-lapses is:
          - use Bridge CS4 to do basic color correction on the still images
          - save those as TIF files
          - run the TIF files through a custom script to have Hugin 2012.0.0 (open source pano stitcher) remove the fisheye distortion
          - open the new TIF image sequence into QuickTime Player 7 (Pro)
          - export the image sequence as a QuickTime movie file
          - import the movie file into Premiere Elements 10 to place on a timeline with other video clips (as Premiere Elements can't handle the sequence(s) of thousands of still images without crashing)
If I can go directly from Bridge to a timeline, it'd save a lot of processing time (and it'd be much nicer to preview the images in Bridge without the fisheye distortion)!
I can prepare the GoPro JPG files through Adobe Camera Raw in Bridge CS6, though when I go to import the JPEG image sequence into Premiere Pro CS6 or After Effects CS6, none of the Camera Raw settings are applied. If I export the Camera Raw files in Bridge CS6 as DNG files (a step I'd really prefer to avoid) and then import the DNG image sequence into After Effects CS6, the Camera Raw settings are applied except for the Lens Profile settings -- I can pick other cameras but not the GoPro lens profiles when the DNG image sequence loads in After Effects. It also appears that once I open the DNG files in After Effects CS6, I can no longer access the GoPro Lens Profile in Adobe Bridge CS6 -- the list changes to the same list I get in After Effects. Premiere Pro CS6 doesn't let me import the DNG files at all. I've also tried to import the JPG files (as well as the converted DNG files) into an image sequence in Photoshop CS6, though it doesn't allow me to do so (the Image Sequence checkbox is grayed out after I apply the Camera Raw settings in Bridge).
There could be an issue going on with different Camera Raw versions. I didn't have Premiere Pro CS6 installed during my initial testing, though now do notice that the Camera Raw dialog in Bridge CS6 only lets me choose compatibility up to "Camera Raw 7.1 and later" when I choose to export the files as DNG. I thought Camera Raw 8.2 was an option there a couple days ago when I only had installed Photoshop CS6 and After Effects CS6 (though am not 100% certain).
Please let me know if there is some workaround to get the GoPro lens profile Camera Raw corrections applied in an image sequence in one of the Adobe CS6 products (without having to export the files as temporary TIF or JPG files out of Camera Raw). I'd greatly prefer to shorten my current workflow for these files. (I just updated the CS6 trials and have tested all three programs again though I still get the same results described above.)
Does Lightroom 5 have any option to export Camera Raw image sequences as movie files (or any other feature that might help in simplifying my current workflow)? I can't install the trial right now as it's not compatible with OS X 10.6.8. I'd consider upgrading OS X if I knew Lightroom 5 would do what I need, though am waiting for any potential color profile issues to be resolved in OS X 10.9.
I can open the image sequence in Photoshop CS6 if no Camera Raw settings are applied and then use the Lens Correction Filter to apply the GoPro Lens Profile settings, though I really prefer the Camera Raw interface in Bridge for tweaking image settings. As soon as I apply Camera Raw settings to the first image, Photoshop CS6 grays out the image sequence checkbox.
If there isn't a way to take Camera Raw files straight from Adobe Bridge to a timeline, I may stick with my current workflow using CS4 and see what I can do to better automate some of the steps as the TIF export in Bridge, fisheye distortion removal in Hugin, and render in QuickTime Player all take quite a while. I won't mind waiting for all the processing if I can set it and check back on it in later the next day when it's fully complete. Is there a way to have Adobe ExtendScript execute an external shell command (i.e.: a command I could type into the bash shell in Terminal in OS X)? If not, is there a way to call/run an ExtendScript script from the command line and pass a parameter to it that my custom script could use?
Thanks in advance,
Mark

Can you zip up a few of your GoPro images, upload them to dropbox.com and post a share link, here, so others can experiment with them, or do you mean this issue is global to all camera models?

Privacy settings not working for me

Hi, I'm Jan and this is more or less my rage.
I THOUGHT Skype had privacy settings, cause I wanted to change some today and I went to check profile settings on my desktop software and show full profile and suddenly at the right edge I see the bane of my existance when privacy is considered. ALMOST EVERYTHING IS GREYED OUT AND SET TO PUBLIC! ARE YOU FREAKING MENTAL?! I'd like most of my info set to contacts only, thankyouverymuch. SO WHAT?! If I want to hide who I am until I am certain I want to tell somebody that information, I should commit identity fraud and FAKE ALL OF MY INFO?! WHY WOULD YOU EVEN CONSIDER DOING IT?! IS OUR PRIVACY WORTH ANYTHING TO US?! I realize that Skype has been through the gutter since it got bought out by Microsoft, but really? You can't manage not showing certain information? EVEN FACEBOOK WHO OWNS ALL THE INFO I PUT ON THERE HAS A "HIDE YOUR INFORMATION TO NON-FRIENDS" SETTING!!! I have a feeling I'll be searching for a new IM and net-calling provider soon, if this doesn't get fixed...
To be honest, I've been patient with every crash, every freeze, every update that looked more hideous than the previous, but this is the last straw.

Thanks for reply. Have done this already. Been spending 48 hours solving all the hardware issues that iOS 7 has caused. I have hardware issues that I never had before update. Had my beef with apple customer service that resulted in Apple being very keen on charging me £200+ for fixing iPad or advising me to buy anew iPad.
Result is that microphone is dead since update after resetting to factory setting 3 times!
Xmas will buy a nexus or samsung, fed up with the bad customer service, the poor software updates, 2 years for a £500 iPad is a bad return on money.
Apple take note!

Fallback Settings Not working for Non-Agreement Senders

I am trying to test the fallback settings for X12 in Biztalk 2010. I am processing an 837P and have one agreement in place that is processing files correctly when file is from the 'from' party of the agreement. I am trying to use fallback to
process files that are from a sender that is not part of the agreement. I have enabled fallback and configured correctly as far as I can see. When I send this type of file thru, I get these warning/errors in the event viewer - any thoughts?
Error encountered during parsing. The X12 transaction set with id '' contained in functional group with id '125482', in interchange with id '000125482', with sender id ' 382674344', receiver id '38-6004862
' is being suspended with following errors:
Error: 1 (Miscellaneous error)
6: Finding the document specification by message type "http://schemas.microsoft.com/BizTalk/EDI/X12/2006#X12_00401_837" failed. Verify the schema deployed properly.
A message received by adapter "FILE" on receive location "837_Receive_Location" with URI "c:\837\*.txt" is suspended.
Error details: An output message of the component "Unknown " in receive pipeline "Microsoft.BizTalk.Edi.DefaultPipelines.EdiReceive, Microsoft.BizTalk.Edi.EdiPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" is suspended due
to the following error:
Error encountered during parsing. The X12 transaction set with id '' contained in functional group with id '125482', in interchange with id '000125482', with sender id ' 382674344', receiver id '38-6004862
' is being suspended with following errors:
Error: 1 (Miscellaneous error)
6: Finding the document specification by message type "http://schemas.microsoft.com/BizTalk/EDI/X12/2006#X12_00401_837" failed. Verify the schema deployed properly.
The sequence number of the suspended message is 1.
MessageId: {D2CC89CA-5080-48E6-A9BF-7ABF6F37E9F2}
InstanceID: {E2416749-D653-461B-9B7D-54AA47F75D00}
Agreement Resolution for x12 Protocol based on the context properties DestinationPartySenderQualifier with value "ZZ", DestinationPartySenderIdentifier with value "38-6004862", DestinationPartyReceiverQualifier with value "ZZ" and DestinationPartyReceiverIdentifier
with value "382674344" has failed.
There was a failure executing the send pipeline: "Microsoft.BizTalk.Edi.DefaultPipelines.EdiSend, Microsoft.BizTalk.Edi.EdiPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Source: "EDI Assembler" Send Port: "837 Send 997"
URI: "C:\837\ack\997_%SourceFileName%_%MessageID%.txt" Reason: Agreement Resolution based on the context properties for x12 Protocol has failed.
Agreement Resolution for x12 Protocol based on the context properties DestinationPartySenderQualifier with value "ZZ", DestinationPartySenderIdentifier with value "38-6004862", DestinationPartyReceiverQualifier with value "ZZ" and DestinationPartyReceiverIdentifier
with value "382674344" has failed.
There was a failure executing the send pipeline: "Microsoft.BizTalk.Edi.DefaultPipelines.EdiSend, Microsoft.BizTalk.Edi.EdiPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Source: "EDI Assembler" Send Port: "837 Send TA1"
URI: "c:\837\ack\TA1_%SourceFileName%_%MessageID%.txt" Reason: Agreement Resolution based on the context properties for x12 Protocol has failed.
A message sent to adapter "FILE" on send port "837 Send 997" with URI "C:\837\ack\997_%SourceFileName%_%MessageID%.txt" is suspended.
Error details: There was a failure executing the send pipeline: "Microsoft.BizTalk.Edi.DefaultPipelines.EdiSend, Microsoft.BizTalk.Edi.EdiPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Source: "EDI Assembler" Send Port:
"837 Send 997" URI: "C:\837\ack\997_%SourceFileName%_%MessageID%.txt" Reason: Agreement Resolution based on the context properties for x12 Protocol has failed.
MessageId: {D053BF43-B315-48C9-9024-842FE53B9906}
InstanceID: {0732CFD5-A997-4704-9D29-B273E104486A}
A message sent to adapter "FILE" on send port "837 Send TA1" with URI "c:\837\ack\TA1_%SourceFileName%_%MessageID%.txt" is suspended.
Error details: There was a failure executing the send pipeline: "Microsoft.BizTalk.Edi.DefaultPipelines.EdiSend, Microsoft.BizTalk.Edi.EdiPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Source: "EDI Assembler" Send Port:
"837 Send TA1" URI: "c:\837\ack\TA1_%SourceFileName%_%MessageID%.txt" Reason: Agreement Resolution based on the context properties for x12 Protocol has failed.
MessageId: {A5BD0F9D-8AEC-4C33-A194-59EF0C619F87}
InstanceID: {877126CD-1630-4FC9-9D30-F2EAA4AB09E7}
Mike Dugan

Hi Mike,
For the error " Finding the document specification by message type "http://schemas.microsoft.com/BizTalk/EDI/X12/2006#X12_00401_837" failed."
Can you check out the section for X12 Schema Discovery in the following link
http://msdn.microsoft.com/en-us/library/bb246089(v=bts.70).aspx. As you are using 4010A1 837_P, your incoming document should have 004010X098A1 at GS08. Or if providing 004010X098A1 at GS08 is not a requirement for your other partners,
then I would recommend you to deploy 837_P schema by removing `_P` extension at the root node, such that the schema that you have deployed would be "http://schemas.microsoft.com/BizTalk/EDI/X12/2006#X12_00401_837"
and that is what EDI Receive pipeline would look for.
Regarding the other error for the 997 and TA1 documents failing with "Agreement Resolution based on the context properties for x12 Protocol has failed.". It is a new constraint that we have imposed on the EDI users in BizTalk 2010 that the 997/TA1
that gets generated in EDI Receive Pipeline for an incoming document should resolve to an agreement with Sender and Receiver Identities which are the reverse of the Sender and Receiver Identities (ISA 5 6 7 8) in the incoming document. EDI Receive Pipeline
would promote the following context properties DestinationPartyReceiverIdentifier, DestinationPartyReceiverQualifier, DestinationPartySenderIdentifier, DestinationPartySenderQualifier and EDI Send Pipeline has to do Agreement resolution based on them. Hence,
there has to be an agreement with those particular identities otherwise the acknowledgements would fail. For your scenario I dont see any other way for you other than writing a custom pipeline component to remove those context properties by nullifying the
values of the above mentioned context properties for all the messages with MessageType is
http://schemas.microsoft.com/Edi/X12#X12_TA1_Root or
http://schemas.microsoft.com/Edi/X12#X12_997_Root such that the messages would resolve to fallback settings. For more details on Agreement Resolution in EDI Send Pipeline please go through
the link
http://msdn.microsoft.com/en-us/library/bb259945(v=BTS.70).aspx
Thanks,
Kowshik Palivela

OOF not working for mailboxes homed on Exchange 2010 server during migration

Hi There
I'm troubleshooting an issue during a exchange 2010 to exchange 2013 migration where the OOF is not working for users homed on the exchange 2010 mailbox servers. This applies to users using outlook 2010 and outlook 2013 .OWA works perfectly and you can also
enable OOF via exchange powershell.
Users homed on the exchange 2013 servers does not have any issues.
The exchange 2010 servers is on SP3 rollup 4 and the 2013 servers on SP1 only without any rollups installed.
So my question will be - have anyone experienced this issue during migration and will patching the exchange 2010 servers to rollup 5 or 6 and the exchange 2013 to sp1 rollup 5 fix the OOF issue then? If requested the client to patch to these levels, but
in the meantime I'm checking if anyone else had similar issues.
Any pointers will be welcome.

Hi ,
1.Please check the problematic exchange 2010 user account can able to access the ews virtual directory internal url and you can check that via browser's.It will prompt for the user name and password , please provide that .
EWS url wopuld be like - https://mail.youdomain.com/EWS/Exchange.asmx
2.Then the second step would be autodiscover check for the problematic user account.you can find that via test email configuration .There you came to know whether outlook is fetching up the proper url for ews and autodiscover.
3.Then please un check the proxy settings in browsers and check the same.
4.please use the command to check the auto discover
test-outlookwebservices
Please check the below links also.
http://exchangeserverpro.com/exchange-2013-test-outlook-web-service/
http://www.proexchange.be/blogs/exchange2007/archive/2009/07/14/your-out-of-office-settings-cannot-be-displayed-because-the-server-is-currently-unavailable-try-again-later.aspx
http://port25guy.com/2013/07/20/user-cannot-set-an-out-of-office-in-exchange-20102013-or-eventid-3004-appears-in-your-event-log/
http://www.theemailadmin.com/2010/06/exchange-server-2010-out-of-office/
Regards
S.Nithyanandham
Thanks S.Nithyanandham

I have an Iphone 4 and my internet has not worked for a good 10 months, why wont it work? my dad pays for my data plan, so its not that i dont pay my bill. I've even tried to reset my net work settings, and that did not work

i have an iphone 4 and my internet has not worked for a good 10 months, why wont it work? My dad pays for my data plan, so its not that i dont pay the bill. I've even tried to rest my net work settings, and that did not work. I went to AT&T and they said that the only way to fix it was to buy a new phone, and im not going to buy a new phone with out my upgrade. someone, please help!

Hey lilmissindian!
I have an article for you here that will help you troubleshoot this issue:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

ODI 11g 11.1.1.7 with Win64 bit OS : Starange problem : Right click does not work for Create new data server in Topology.

ODI 11g 11.1.1.7 with Win64 bit OS : Strange problem : Right click does not work for Create new data server in Topology.
On right click nothing happens at all. I have reinstall the ODI multiple times with right installer. issue persist.
Please help.

Hi,
Did you use the generic installer or the win32 one ? You should use the former with Win64.
You can also check that your version of Java is supported in the certification matrix.
Regards,
JeromeFr

Lion Server DNS service not working for locally created zones. Caching working fine.

OS Lion Server DNS service not working for local zones. Was fine under Snow leopard server but Lion server upgrade has severely broken my DNS and web sites. Zones look fine under Server Admin but keep getting "query failed (SERVFAIL) for xxxx at /SourceCache/bind9/bind9-42/bind9/bin/named/query.c:3921" in the logs. BTW - Server Admin cant seem to see the log file either.
Surely someone actually tested that DNS still worked on Lion?

I upgraded from Snow Leopard Server to Lion Server on day 01. I hit the same issue where, after the upgrade, my Lion Server stopped serving names for my private local domain.
I finally took a few minutes to figure out what was wrong. After turning on debug logging and looking through the logs, I found my particular issue, now resolved.
The issue I had was, when the domain initially was setup when I installed Snow Leopard Server, for some reason it created a zone just for the server (in my case, something like zone "s-01.mydomain.priv"), and a separate zone for all the other machines (zone "mydomain.priv", containing all the private IPs for my local domain). I never messed with it because it worked, but generally I would have put all of them in the same zone.
My zone "mydomain.priv" had a nameserver and mail exchanger entry for my server, s-01.mydomain.priv. I could see this in the Server Admin app on the DNS bubble, Zones tab, mydomain.priv selected, and the General Info panel. This was fine in Snow Leopard. This was failing the zone load in the updated bind for Lion Server, though. The issue was that the "mydomain.priv" zone was referencing the s-01.mydomain.priv server, which was not defined in the "mydomain.priv" zone but rather in the "s-01.mydomain.priv" zone.
My fix:
1. In Server Admin, add the server to the zone "mydomain.priv". I put an A record (Add Machine) in the "mydomain.priv" zone for my server named s-01.mydomain.priv.
2. shut down DNS on the OS X Lion Server (hit the Stop DNS button on Server Admin).
3. edit /etc/named.conf by hand, removing the specialized zones that contianed just the server. In this case, it would be the section titled 'zone "s-01.mydomain.priv"' and the section titled 'zone "3.10.1.10.in-addr.arpa"'. Your in-addr.arpa zone name will change based on whatever your server IP address was. My internal one happened to have s-01.mydomain.priv mapped to 10.1.10.3.
4. Once the specialized zones for just the server were removed, I started the DNS up again. Instead of serving four zones as it had in OS X Snow Leopard Server, it now servers two zones. And, now, it is resolving my local machines for the mydomain.priv zone.
YMMV. I did note that it wasn't totally necessary to do step 3, but I never really understood the need for the specialized domain, and keeping it around would have a copy of data that would just confuse things.
Hope that helps. That's been the only hiccup I've noticed updating to OS X Lion Server thus far.

Oc4jadmin not working for application server control in SOA suite 10.1.3.1.

Hi,
We have installed the SOA suite, and I can login to the various components using oc4jadmin/password (bpel, esb, rules author), but for some reason that oc4jadmin password is not working for Application Server Control, which is the only piece of this I really need to log in to.
Any thoughts on what is going wrong?
Cheers,
Pat Rock

Maybe you change this password internally for another application (such BPEL, WSM,etc) and didn't make change for your main OC4J container.
You can try to change this password by...
1. Open the file [OASHome]\j2ee\home\config\system-jazn-data.xml
2. Find the section that looks like this
[user]
[name]oc4jadmin[name]
[display-name]OC4J Administrator[display-name]
[guid]88836370D11611DC9F30F9C1CD6F1A73[guid]
[description]OC4J Administrator[description]
[credentials]{903}F+iG1A46edXG9RdfY0pD2O4Ge/qyEjsg[credentials]
[user]
3. Replace the value separated by the "Credentials" starting and ending tags with your new desired password, prefixed with an exclamation point
Example:
[user]
[name]oc4jadmin[name]
[display-name]OC4J Administrator[display-name]
[guid]88836370D11611DC9F30F9C1CD6F1A73[guid]
[description]OC4J Administrator[description]
[credentials]!newpassword[credentials]
[user]
4. Save the file and restart OAS
This should not affect other applications.
Greetings.

TableView : sort = "SERVER" ...does not work for "TIME"

Hi,
TableView sort = "Server" works automatically for "Date" Fields and "Text" Fields.
But it does not work for "Time" field with data element "CDUZEIT". It shows the below error message:
Note
The following error text was processed in the system IFD : Invalid sort field type in "SORT ... AS TEXT".
The error occurred on the application server ifdmain_IFD_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: IF_HTMLB_ELEMENT_DELEGATED~DO_AT_END of program CL_HTMLB_TABLEVIEW============CP
Form: DELEGATED_END of program CL_HTMLB_ELEMENT==============CP
Form: IF_BSP_ELEMENT~DO_AT_END of program CL_HTMLB_TABLEVIEW============CP
Form: ONLAYOUT of program CLO27OLHO7EA9KVWPONPDC2NLTDFHCP
Form: %_ONLAYOUT of program CL_O27OLHO7EA9KVWPONPDC2NLTDFHCP
Form: DO_REQUEST of program CL_BSP_PAGE===================CP
Form: CALL_VIEW of program CL_BSP_PAGE_BASE==============CP
Form: CALL_VIEW of program CL_BSP_CONTROLLER=============CP
Form: DO_REQUEST of program ZCL_ZPR_C_ACTION_LOG==========CP
Form: DO_REQUEST of program CL_BSP_CTRL_ADAPTER===========CP
Thanks and Regards,
Bindiya

Welcome to SDN.
This problem and solution to it is exaplined in the following oss note number.
<a href="https://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=893210&_NLANG=E">893210</a>
Regards
Raja

Alerts are not working for Site collections in a content database

Hi,
We have been into a strange issue that alerts are not working for site collections from a particular content database. When user subscribed for the alerts, they are getting mail about their subscription but not after that for any new items/documents added
or changes happen in the list/document library.
We have tried with Immediate as well as scheduled alerts both are not working.
FYI, Alerts for all other site collections from different content database for the same web application are working without any issues.
Any help would be appreciated.
Thanks
Ramkumar

Looks like an Timer job Issue for your web application. Can you please check if these jobs are enabled and check error log for the alerts Timer jobs .Check whether the "Immediate Alerts" job is enabled for your web application.
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
Please check this wiki -
Troubleshooting Steps for SharePoint Alert Email Does Not Go Out
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Content Server Settings not working (for PPM)

Similar Messages

Maybe you are looking for