Content-Transfer-Encoding for mail from Portal
Hi,
I work on Portal 7.0 SP 12.
Do You know how to change encoding (Content-Transfer-Encoding) for mails send from portal by users (ex. from Collaboration Launch Pad) ?
Regards,
Jarek
Thank you
Similar Messages
-
How to change Content-Transfer-Encoding for mail sending
Hello Experts,
I need to send some documents through mail which i am doing with the help of cl_output_service=>document_output method. Mail is been send succesfully.
But in the payload content which got from Exchange server:
X-Mailer: SAP Web Application Server 7.10
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Can any one help me, how i can change Content-Transfer-Encoding field to some other format which is not 'quoted-printable'.
Thanks & Regards,
DheerajDo you documents contain an XML Declaration like this at the top?
<?xml version="1.0" encoding="ISO-8859-2"?>
If not, then they need to. The XML 1.0 specification says that if an XML declaration is not present, the processor must default to assume its in UTF-8 encoding. -
How to change the Content-Transfer-Encoding for the fmddataa.fmd from base
Dear all,
When I using this SO_DOCUMENT_REPOSITORY_MANAGERto send email,I find the fmddata.fmd file have been changed to binary file attachment. I don't hope so.any one have good idea to avoid this case occur?
Can you tell me how to change the Content-Transfer-Encoding for the fmddata.fmd from base64 to quoted-printable. The quoted-printable is the Content-Transfer-Encoding for text file with extension .txt
Best Regards,
MerryThank you
-
I use Mail 3.6 and some incoming email messages start with
Content-Type: text/plain;
charset=utf-8
Content-Transfer-Encoding: base64
then go on to 200+ lines of alphanumerics (mostly upper and lower case letters).
What causes this problem, how can I fix it?
Text encoding is set to Automatic, and I'm not using any fancy fonts. Senders are usually
sending from PCS that may well use Outlook.
Rosemary C. ChicagoDoes it look something like this...
JVBERi0xLjYNJeLjz9MNCjMyNCAwIG9iag08PC9GaWx0ZXIvRmxhdGVEZWNvZGUvRmlyc3QgNi9M
ZW5ndGggMTU4L04gMS9UeXBlL09ialN0bT4+c3RyZWFtDQohx6hAp7lMT4WVkGpP6z3UpIQfO4eN
QRbgjhTqX5mfaabWcvQk/hLnUX6MpKiXwist+RiaiGrzj8XGSNFXuvETWsnoPoV687Exvzo1KYV4
jIuPmKXlRJvESTE/K2htJihPMS/o6fo3i+nHbTBRWpyrXSfmCPVEgsAzcyECvSU0Rz4MJsEXpdu6
6u/hg1hlPkb2gpkUQJv50YtWhkD/Jg0KZW5kc3RyZWFtDWVuZG9iag0zMjUgMCBvYmoNPDwvRmls
Check Mail>View>Message, does it say View Raw Source, Long Headers, or Default Headers?
See if view Plaintext version helps. -
Five days ago I received an anonymous email with the subject:
Your Apple ID was just used to buy full album Elton John £12.99.Your receipt No.37930343160405752
The content started: Content-Transfer-Encoding: base64 From:(my email address) followed by a very,very,very long stream of gobbledygook. There is no record of it in my i-tunes purchases or my credit card statement but that might only be because I have not updated my credit card details. Should I be worried that my account has been compromised? Does anyone know how I can get through to the right section of Apple to deal with this - all the emails I get say no-reply so I don't have an email address to contact them on.
I would be most grateful if anyone could help me with this.
Thanks in advance
WalwalIt's a phishing attempt to try and get your account and payment details - forward it to Apple : [email protected] , and then delete it
Phishing emails : Identifying fraudulent "phishing" email - Apple Support
Genuine emails : Identifying legitimate emails from the iTunes Store - Apple Support -
I want to convison the mail body 's Content-Transfer-Encoding to base64
Return-Path: <[email protected]>
Received: from tobacco ([130.130.160.76]) by webapp.tobacco
(Netscape Messaging Server 3.6) with ESMTP id AAA70AC;
Tue, 6 Nov 2001 18:26:28 +0800
type: ���� intra@ius_center 1670
subject: ������gggggg��
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
Date: Tue, 6 Nov 2001 18:26:28 +0800
Message-ID: <[email protected]>
From: [email protected]
<center><h1>����</h1><TABLE BORDER=1 CELLPADDING=5 width=90%%>
<TR><TD BGCOLOR=#CCCC99 width=74 valign=top><STRONG>��������</STRONG></TD><TD BGCOLOR=#EEEEEE>gggggg</TD> </tr>
<TR><TD BGCOLOR=CCCC99 VALIGN=TOP><STRONG>�� �� ��</STRONG></TD><TD BGCOLOR=#EEEEEE>������ ������������������</td></tr>
<tr><TD BGCOLOR=#CCCC99 VALIGN=TOP><STRONG>�� �� ��</STRONG></TD><TD BGCOLOR=#EEEEEE >������ ������������������</td></tr>
<tr><TD BGCOLOR=#CCCC99 VALIGN=TOP><STRONG>��������</STRONG></TD><TD BGCOLOR=#EEEEEE >fdsf</td></tr></TABLE>Me too. I want to find out what encoding a particular $INPUT_FILE part is when I need to parse it in my conversions script.
-
Content-Transfer-Encoding is possible to change of received mail?
Its possible change Content-Transfer-Encoding 7bit to 8bit in received mail?
If yes please let me know how?
Thanks
Sanjay kashyapHi Sanjay Did u get any answer to ur problem as i also have problem with encoding problems and would like to change the encoding of the email message in the case when it is not specified with the email itself
Thanks -
Problem of encoding for mail sender adapter
Hello, everyone.
I have faced the problem of mail sender adapter.
When someone send message with any content encoding (even UTF-8) and 8bit content type encoding the XI mail adapter corrupt special and foreign symbols. I checked the message for correct structure and encoding with tpcgw utility and it was fine. For example (this is what I can see in tcpgw)
==== Response ====
+OK
+OK Password required for user itra_xi
+OK XXXXX maildrop has 1 messages (2048 octets)
+OK 1 2048
+OK
+OK 1459 octets
Return-path:
Received: from (port=20091 helo=XXXX)
by mx76.mail.ru with psmtp
id 1O7UoW-0003I4-00
for XXXXXX; Thu, 29 Apr 2010 18:34:04 +0400
Message-ID:
Subject: Message 29 4
Date: Thu, 29 Apr 2010 17:33:43 +0300
MIME-Version: 1.0
Content-Type: multipart/alternative;
boundary="----=_NextPart_000_0018_01CAE7C2.1D0BBA60"
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2900.5843
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5579
X-Spam: Not detected
X-Mras: Ok
This is a multi-part message in MIME format.
=_NextPart_000_0018_01CAE7C2.1D0BBA60
Content-Type: text/plain;
charset="utf-8"
Content-Transfer-Encoding: 8bit
Test
Тест
And after processing by XI mail adapter I have this payload (XIPAYLOAD mode using mail package)
Test
Тест
The same situation with using mail package in xml document.
Any suggestions how this can be corrected?I switched UTF-8 encoding during displaying of http content in tcpgw utility and all other mail clients detect it as UTF-8 and work fine. Also this problem occurs with different mail clients that are senders of the message. So it seems adapter takes each byte of cyrillic symbol (each from two) and represents it as individual symbol.
Correct me if I'm wrong. Maybe there is some configuration somewhere allowing to correct or maybe it's possible to write module to correct.. but it's quite complicated to split correct and incorrect symbols. -
Email Prob - Content-Transfer-Encoding: base64
Using APEX to send an email to a CA product. We are doing this successful with another source (not Apex). The email that is sent opens a Help Desk ticket in the CA tool.
Another development tool has the this in the mime.822 file:
Content-Transfer-Encoding: 8 bit
The email send from APEX has Content-Transfer-Encoding: base64.
The look of the emails are different, this is why it is not working correctly when sent from APEX.
Does anyone know about base64 versus 8-bit?Steve,
>> Yes, I am sure. This all being done inside our firewall and domain.
For an e-mail message to get from point A to point B, it must go through some message transfer agent somewhere, regardless whether it's all within the same firewall, domain, or otherwise.
>> Is there a work-around for this?
There can only be a workaround when the definitive problem has been identified. That has not been done.
I just sent myself a message from apex.oracle.com, which is running APEX 3.0.1. I examined the entire message source in Thunderbird. I found no occurrence of Content-Transfer-Encoding in my message whatsoever. Hence, I believe this is not APEX which is injecting this into your message.
My suggestion - take a look at what your SMTP server settings are for your APEX instance. Ensure that you are routing your e-mail to the SMTP server which works from the other "source" which is done successfully.
Joel -
Content-Transfer-Encoding Header missing?
Hello,
our Exchange 2013 CU 6 won't send "Content-Transfer-Encoding" Header when sending Mails to external Domains. (This Header is present if Mail stays within our Org)
Already tried to set different Encodings - but without luck ... Exchange just won't generate this Header ...
[PS] C:\Windows\system32>Set-RemoteDomain -Identity Default -ByteEncoderTypeFor7BitCharsets Use7Bit
[PS] C:\Windows\system32>Set-RemoteDomain -Identity Default -ByteEncoderTypeFor7BitCharsets UseBase64
[PS] C:\Windows\system32>Set-RemoteDomain -Identity Default -ByteEncoderTypeFor7BitCharsets UseQP
Hope someone here can help me with this!?
Thank you, bye from Austria
Andreas Schnederle-WagnerHi,
I suggest try to re-start the Transport service after running the commands you mentioned.
Please try to refer following KB to change the encoding type. I suggest make a backup before changing the value.
How to change the method for transfer encoding after you apply Exchange 2007 SP1 to the Exchange 2007-based server that is running the Hub Transport role
https://support.microsoft.com/kb/946641?wa=wsignin1.0
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support -
Transfer my e-mails from Apple mail to Microsoft outlook (windows)
Having another problem guys. I use Mac Book Pro as well as a windows based laptop form the manufacturer Dell. In MBP i use apple mail as my email client and in dell i use outlook. Now what i want to do is transfer all my mails from apple mail to outlook
as i use both my laptops for different reasons at different places. So it is important for me to have all the emails on both the email clients. Any body with solution please do reply.
Thank you for help.I'd ask them over here.
http://answers.microsoft.com/en-us/office/forum/outlook
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Hi! I want to transfer my old mails from mac book pro to iPad 2, Please help me on this.
Did you select the Pages app to sync to the iPad? Do you know how to do that or do you auto sync and rely on that only?
-
How do we transfer contacts and mails from apple mail and address book to Microsoft outlook on my mac
From Contacts, anyway (the new version of Address Book) you can export to a .abbu file and import then into Outlook. I'm not sure about Mail as I only really use Outlook...
Clinton -
Mail on ipod touch seems to show all mails in ISO8859 or so.
The problem is I sometimes have to read mails in Chinese/Japanese encoded in EUC-CN/EUC-JP etc.
Is it possible to change the default encoding for Mail?same problem with me. Sometime I can read Chinese/Japanese mails. Sometime the mails are unreadable. Why is Mail on mac be able to read all mails but mail on iTouch have encoding problems? I thought iTouch could be a better protable device system than windows CE in terms of international.
-
TS4009 I want to transfer my e-mails from iCloud to Gmail account. How do I do it?
I want to transfer my e-mails from iCloud to Gmail account. How do I do it?
Go to icloud.com from your computer, sign into your iCloud account and launch Mail, click the gear icon on the lower left and choose Preferences, then on the General tab yo can set up forwarding to forward email to your Gmail account.
Maybe you are looking for
-
Can you have 2 seperate iphone accounts on the same computer?
Can you have two seperate iphone accounts on the same computer??? please help?
-
Variable number of "IN" members
I have an application with an SQL statement that simplifies to SELECT * FROM X WHERE Y IN (?, ?, ?, ?, ?) The problem is that the number of items in the IN portion of the query is variable and yet I want to prepare the statement once and execute it m
-
Customized Quiz Summary screen
<Captivate 7, Win 7> Hi, Can we customize Quiz Summary screen? Can there be a review screen that shows: custom title of each assessment slide e.g. "Algebra question' the learners answers what the correct answers were AND, on this same screen, can th
-
How to startup DB in client?
Hi there, How to startup DB in client? SQL> conn scott/tiger@mytestdb as sysdba Connected. SQL> shutdown immediate Database closed. Database dismounted. ORACLE instance shut down. SQL> startup ORACLE instance started. ORA-12528: Message 12528 not fo
-
Hello, I don't know what it doesn't work with this code. It's about create and update oracle tables throw Java. can someone just check the code and tell me where is the problem ? thanks in advance import java.sql.*; public class SQL_QUERIES_TESTING {