Content Type Column Names with same display Name ???

Hi everyone,
I have a SharePoint Sitecollection where are Site Column Display Names are the same (see Image)
If I view the URL links, the internal names are different, that's ok.
But how is this possible ? You can't rename the columns with existing names ?
Thanks
Stephan

Like Enrique I would say these werent created via the interface. Doubt a migration would have done anything only Lookups seem to be duplicating. Could these be used in a form of some kind?
If this is helpful please mark it so. Also if this solved your problem mark as answer.

Similar Messages

List content type columns don't show new names after resource files were changed

Hello,
we ran into a problem, that we're not able to figure out at the moment.
We have a site collection with site columns and site content types defined and created with
features ant their XML files. All display names are retrieved from resource files. We do have
several subsites, that have predefined lists also created from features and their corresponding
XML files. They use inherited versions of these site content types as list content types with
their columns inherited from the site columns.
We had some changes within the resource files and never ran into a problem up to now.
We changed the display names of some of these columns within the resource files. After
these changes the site columns, site content types and list columns show the changes
as planned. Unfortunately the columns of the list content types do not display the changes.
They still show the old name. If you try to alter the old names manually the new name is
shown within the form, but you're not able to save it and the list content type columns
still have their old name afterwards.
We checked our definition files and they seemed to be well.
Any ideas?
Regards,
Markus
List columns as defined within new the resource file:
List content type columns, that do not show the changes from the new resource file:

Hi,
According to your post, my understanding is that you want to modify the site column name in the list.
I try to reproduce the issue, however, everything works well.
You can modify the DisplayName in the Element.xml file.
Then after you redeploy the project, the site column name will be changed in the list setting page.
In addition, please check whether you create the list correctly.
For more information, you can refer to
Walkthrough: Create a Site Column, Content Type, and List for SharePoint
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

How can OIM provision users with same Display Name in AD?

I can create users with same First Name, Middle Name and Last Name (same Display Name) in OIM if they have different UserId.
But I can not provision two users with same Display Name to one Organization Unit in AD, the resource provisioning shows
Status: Rejected
Response: AD user already exists
Can AD be configured to create users with same Display Name (different UserId) in one OU, or would I have to create logic in OIM to modify the display name so it gets accepted by AD?
Thanks!

Thanks Nitesh. Also, I can create the user with same DN in different OU's, not in same OU.
I agree once we determine that same cn exists in one OU , I can modify the display name by appending a number at the end or something. I understand the logic but I need more details on how to specify this logic in the pre-pop adapter, can you please share more details.
Thanks a lot!

Multiple Accounts With Same Display Name Lync 2013

Hi All,
I have a single user in my Lync 2013 environment that sees three different users with the same exact display name. All three users have a different SIP address.
User1 - Melissa A. - [email protected]
User2 - Melissa A. - [email protected]
User3 - Melissa A. - [email protected]
Upon looking at the contact card, each user has the same display name but correct email address. However there is another email address line that appears underneath the original Send Email address line - on other computer's this appears as "IM".
The user is running a Windows Server 2012 Standard on a Hyper-V Virtual Machine. I've tried re-installing the Office 2013 suite as well as forcing an Global Address Book update from his local machine. All data is correct in Lync Server and Active Directory.
Can someone please advise? Could it be a corrupt database?
Thanks in advance,
Adrian

Hi Adrian,
You could try deleting the following data for the user.
1. User profile:
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
2. Registry Key:
HKCU\Software\Microsoft\Office\15.0\Lync\[email protected]
3. Outlook Contact
Delete the related Contact Cards in Outlook
Hope it can be helpful.
Best regards,
Eric

I have only a single texbox.i want to display names , date,priortiy in the same textbox when i typed @ names should be display names like when u type comment in facebook for particular person it will display name. when i type ! date should be display and

i have only a single texbox.i want to display<big style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe
UI', Arial, sans-serif;line-height:normal;"> names , date,priortiy </big>in the same textbox <big
style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe UI', Arial, sans-serif;line-height:normal;">when i typed @ names should be display names</big> like
when u type comment in facebook for particular person it will display name. when i type ! date should be display and when i type * priority should be display in same textbox like
example <big style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe UI', Arial, sans-serif;line-height:normal;">@
names !today date or tomorrow date etc * priority high,low ,medium etc</big>

This is my first time posting here, so I'm sorry, I re-read my post several times and honestly did think I provided enough information, but you're right, it wasn't the right kind. So please (continue to) bear with me, I'm really not trying to be ignorant. I honestly assumed the issue was something I was doing wrong in Bridge, nothing to do with my computer specs.
I am using a late-2008 Macbook, running Yosemite 10.1.1 (screenshot below)
On the Mac I am using Bridge CC 6.1.1.115 and Photoshop CC 2014 (2014.2.1 release, 20141014.r.257 x64)
Here is a link to the System Info from Photoshop on the Mac
Here is a screenshot of my System Overview on the Mac
Here is a screenshot of my Photoshop performance preferences on the Mac
I am also using a Dell desktop with Windows 8, running Photoshop CC 2014 (2014.2.1 release, 20141014.r.257 x32) and Bridge CC 6.1.0.116 x32 (on a separate CC account with separate files that I don't try to sync or anything)
Here is a link to the System Info from Photoshop on the Windows computer.
Here is a screenshot of the system overview on the Windows
Here is a screenshot of my Photoshop Performance preferences on the Windows computer
I work with jpg, psd, ai, svg, and pdf files. Most of my stacks are three different file types of the same image, usually jpg, psd/ai, and pdf.
I have not recieved any error messages
I am not having issues opening raw files, I am not having printing issues, I have listed the troubleshooting steps I have taken.
Is there any information you need that I missed? I'm trying not to be a dingus, but I'll have to ask you to be patient with me in the meantime. I haven't ever looked up half the hardware/software details that were suggested and I don't know how to off the top of my head, so I provided what I already knew how to

There are multiple users with the same display name

Hi,
We have a user and when she get an item assigned to her she sees the following alert:
"There are multiple users with the same display name USERNAME and at least one of them does not have read permissions to some of the files"
Now I looked in the database and when I run the following query with the username:
SELECT
[ProviderDisplayName]
,[DisplayName]
,[HasDisplayName]
,[Domain]
,[AccountName]
,[UniqueUserId]
,[LastSync]
FROM [Tfs_Configuration].[dbo].[tbl_Identity] where displayname like '%USERNAME%'
Then I get 2 same usernames back, How can I get rid of one of them ? When I access TFS trough the portal I only find 1 occurence of this user.
We use VS2013 and TFS2013 update 4
Best regards

Hi DSW,
Thanks for your post.
In your query result, please check if these two users have the same Account Name. if they are two different Account Name in result, it indicate there’s two users have the same display name in your AD, please check that two users’ information in
your AD. We suggest change one user’s display name in AD.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Multiple Infoobject with same technical name

Hi All,
I have a very basic question which confuses me a lot.
I have installed a BI content info cube 0SD_C03(Sales overview) and it is installed in Info Area - ERP Analytics -->sales and distribution analyses. I checked the dimensions of it and 0customer( master data attr) is linked as a dimension. I created a copy of 0SD_C03 and the new Infocube name is ZSD_C03_T. It also has the same 0customer master data attr as a dimension(obviously!).
Now both the infocubes have different technical name(0SD_C03 and ZSD_C03_T) since they will be storing different sets of data(lets say). but the technical name of the master data (0CUSTOMER) is the same for both cubes.
ques 1: Is it since its a master data and contains the same set of master data for both the cubes, it has the same technical name?
If I search the Info provider section for "0CUSTOMER", i get two entries: One within my info area and another within another info area. And also i can keep doing (Right click Info area--> Insert Characteristic as Infoprovider) on every other info area and insert 0CUSTOMER in every other info area.
ques 2: does all the 0CUSTOMER in different info areas, actually contain the same set of data?
ques 3: if i search for 0CUSTOMER in InfoObjects section, i get 5 entries in different infoareas. How can there be diffferent Infoobject with same technical name be present in different info areas?
Sorry if i am too elaborate, I hope i have made my questions clear.

Hi,
ques 1: Is it since its a master data and contains the same set of master data for both the cubes, it has the same technical name?
A. same 0CUSTMER you can use the different places it holds same data.
source is the 0CUST_ATTR -> target is 0CUSTOMER.
ques 2: does all the 0CUSTOMER in different info areas, actually contain the same set of data?
A. it will contain the same set of data.
it has the overwrite function.
ques 3: if i search for 0CUSTOMER in InfoObjects section, i get 5 entries in different infoareas. How can there be diffferent Infoobject with same technical name be present in different info areas?
A. you triggered the 5 times for specif DTP means you will 5 entries for different info areas.
finally i will say you use the 0CUSTOMER no of places where you required and no need to create the ZCUSTOMER.
Thanks,
Phani.

Two Technical Names with same Description in BW

Hi Experts,
Currently I am facing Problem in SAP BPC NW 7.5 one of Applications ( Profit And Loss Appl)
At Backend ( BW) I could observe that for P&L application 2 diff technical names with same description "PROFIT AND LOSS". We were not sure who created the other one. Prior to that there was no problem while fetching the data.
Before creation of 2nd Info Cube in BW, I was able to retrieve the values ( Transfer values from Fixed Cost & Revenue Forecast). However, after cretion of 2nd cube unable to see my data in PL reports.
Before deleting 2nd Cube in BW, I could see the data in backend in old Cube, but unable to retrieve data in BPC excel report.
Once I deleted the new PL infocube in BW where there was no data in that cube, still I was not able to retrieve the data in my old cube.
Request you to help me....
Thanks & Regards,
Hari

Hi Sanjeev,
If Appset transport happend twice, all applications should have come in BW. But in this case only PROFIT AND LOSS has got 2 diff tech names.
Hi Nilanjan.
Yes, both the cubes in Infoarea ( QA system) and we have not faced earlier this problem either in any other environments ( DEV or PROD).
Will DEV system appset transport will help to resolve this issue in QA since DEV & QA has same structure?
Regards,
Hari

Two query with same technical name in Quality

Hi experts,
I have two queries in Quality with same technical name. I used the program RENAME_DUPLICATE_ELEMENTS to rename the query and its renaming the latest query instead of the old Query. I am in BI 7.0 system and cant find a note that applies to BI 7.0. There are quite a few notes on 3.x system. Has somebody faced the same problem. What did you do. If there is a note for bi 7.0, please let me know so i can resolve with the Basis team.

We had similar issues - this happens when you create a query locally and then transport the same.
The queries have an internal GUID which is generated locally and this causes duplicates.
You can :
1. Delete queries using the GUIDS ( you can find this in RZCOMPDIR or RSRREPDIR tables ) using RZDELETE to delete queries.
identify your older version query and then delete the same and you should be good to go...
also try identifying the same using program
ANALYZE_RSZ_TABLES

How to get two fields with same tech name in LIS Extractors?

Hi Experts,
I need "ERDAT" field from two structures (QMSM & QMFE) in 2LIS_18_IOTASK extractor.
In LBWE first I moved ERDAT from QMSM. When I moved ERDAT from QMFE it gives an error:
"Field with same technical name is already available in the Extract Structure".
I don't want to create Append Structure as we need to write User exit.
Can any one tell me how to get this field added in the extractor from QMSM and QMFE?
Thanks for your help.
Regards,
Sree

this is not possible as the all those fields are put in one structure. per definition you can't put the same field name twice in a structure, table in the data dictionary...
hence, you really need to use an append and fill via user exit
M.

Recreate skype user with same skype name ?

I just deleted 21 skype users, by mistake, in Business Manager, is it possible to recreate them with same skype name ?
/Claus

Hi again,
Hope this helps.
alias_maps = hash:/etc/postfix/aliases,hash:/var/mailman/data/aliases
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-mailtransport:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
inet_interfaces = all
luser_relay =
mail_owner = postfix
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains =
messagesizelimit = 10240000
mydestination = $myhostname,localhost.$mydomain,localhost,apm.pt,onlearn.apm.pt,ml.apm.pt,xserv e.apm.pt
mydomain = apm.pt
mydomain_fallback = localhost
myhostname = mail.apm.pt
mynetworks = 127.0.0.1/32,195.23.139.104/29
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
ownerrequestspecial = no
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdclientrestrictions = hash:/etc/postfix/smtpdreject
smtpddelayreject = yes
smtpdenforcetls = no
smtpdhelorequired = yes
smtpdhelorestrictions = permitsasl_authenticated,permitmynetworks, checkheloaccess hash:/etc/postfix/heloaccess,reject_non_fqdn_hostname,reject_invalidhostname,permit
smtpdpw_server_securityoptions = login
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdsenderrestrictions = permitsasl_authenticated,permit_mynetworks,reject_non_fqdn_sender,reject_unknown_sende rdomain,permit
smtpdtlsCAfile =
smtpdtls_certfile =
smtpdtls_keyfile = $smtpdtls_certfile
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = no
unknownlocal_recipient_rejectcode = 550
virtualaliasmaps = hash:/var/mailman/data/virtual-mailman
João.

2.0 firmware causes some contacts with same last name to not be displayed

After upgrading to 2.0 it appears that only the first contact for a given last name is shown in contacts. Interestingly, if i search for that last name all of the contacts show up, so they are indeed syncing to the phone but are not able to be viewed in the regular contact list. I tried restoring the phone (imported settings from last sync after restore) and still have the same problem. Anyone else see the same thing?

I'm not aware of anyone called just "John"! Everybody I know has at least a first name and a last name... therefore that is the data I enter into Address Book and iSync works fine for me and all my Sony Ericsson phones.
If you don't provide the required data, you can't really expect iSync to work correctly.
There is a reason for this... its because most phones don't split First and Last Name into two fields like Address Book does. So, if you have a contact named just "John" with no last name, when you sync, how does iSync know whether "John" is a First or Last name?
To get around this iSync adds a '-' into the blank field, so that when syncing back it knows where to put the data.
The solution is extremely simple, just provide Address Book with a first and last name (which AFAIK everyone has).

IDOC to multiple file with dynamic file names with same content

Hi,
My scenario is from IDOC to file.
The number of files which i need to create is dynamic, which depends on the number of plants.
I have a Z-table where i will maintin list of all plants ( non SAP plant names).
I need to fetch the data from this z-table and depending on the nunber of plants i need to create the file for each plant and fiel name should contain plant name in it. EX: abc_<plant>_datatype.txt
I want to use only receiver one CC, and files should be created in the same directory.
Can we do this without BPM?

Hi,
You can use the Mapping lookup concept to fetch the plant names from Z-tables and then you can use the variable substitution technique to resolve your purpose.
Here you need to create multiple interfaces ie.e per plant to create multiple files. You can use common Communication channel for all.
Mapping Lookup
http://help.sap.com/saphelp_nw04/helpdata/en/cf/406642ea59c753e10000000a1550b0/frameset.htm
Mapping Lookups - RFC API
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a03e7b02-eea4-2910-089f-8214c6d1b439
/people/bhavesh.kantilal/blog/2006/11/20/webservice-calls-from-a-user-defined-function
http://help.sap.com/saphelp_nw04/helpdata/en/cf/406642ea59c753e10000000a1550b0/frameset.htm
Variable Substitution
An interesting usage of Variable Substitution in XI
/people/sameer.shadab/blog/2005/09/23/an-interesting-usage-of-variable-substitution-in-xi
SP12 -Variable Substitution option
Receiver File Adapter:Variable substitution :FATAL ERROR
Thanks
Swarup

XML Parsing issue with same tag names at multiple levels.

My XML has the same tag name , ID at different levels in the XML.
<InventorySearch>
<*ID*>ID1</*ID*>
<interactionDate>2012-09-01T10:30:00Z</interactionDate>
<DescribedBy>
<value>Cycle Count extract</value>
<Characteristic>
<*ID*>ID2</*ID*>
</Characteristic>
</DescribedBy>
<type>Cycle Count</type>
<InventorySearchComprisedOf>
<*ID*>ID3</*ID*>
<quantity>
<amount>1</amount>
<units>EACH</units>
</quantity>
<itemDateComplete>2012-09-07T10:30:00Z</itemDateComplete>
<itemStatus>Open</itemStatus>
</InventorySearchComprisedOf>
</InventorySearch>
When I use the Extract function with XML Sequence, I am getting all the ID values concatenated.
select extract(value(d),'//ID/text()').getstringval() as id1,
extract(value(e),'//ID/text()'). getstringval() as id2
from xxnbn_cc_response_xml_stg x,
table(xmlsequence(extract(x.xml_column,'/InventorySearch'))) d,
table(XMLSEQUENCE(extract(D.column_value,'//InventorySearchComprisedOf')))(+) E;
Return values :
ID1 - ID1ID2ID3
ID2 - ID3
Is this the right way to parse this type of XML?

The answer would depend upon your version of Oracle
select * from v$version
and the desired result set you want to see.
If you are 10.2 or later, than XMLTable would be easier to write, but I won't go that way until we know more about what you want to see.

[boxir2-sp4] two separate CMS with same cluster name

How can I change the current cluster name. Currently have two separate CMS on two separate servers but with the same cluster name. They both show up on each others CMC -> Servers page. This was not our intention.
Please advise.
Thanks.

Login to CCM, stop CMS server, go to it's properties, go to Configuration tab, check "change cluster name box" and type new cluster name, click apply, OK, start CMS. Done
Make absolutly sure that each CMS is pointing to it's own CMS DB !!!

Content Type Column Names with same display Name ???

Similar Messages

Maybe you are looking for