Content type is text\xml - 400 Bad Request, Content Type - Blank - success
Hi,
I have a send port subscribing to a message from the Message Box and sending the message to a service.
The content type is text\xml, and it fails with a 400-Bad Request.
If the send port picks up the message from a folder , Content Type is Blank, the service returns a response.
How do I make the message picked up from the Message Box ( with Content Type text\xml) work. Can I change the Content Type of the message at the Send Port (WCF-Custom, Basic HTTP Binding).
Regards,
Sharmishtha Sarkar
You issue is not with Content Type text\xml On the wire web request is passed as text\xml as content type and issues is neither with send port folder .
I would say you need to check your send port binding and SOAP Action header inside your Send Handler . Best way to import the binding generated while consuming service through BizTalk WCF Service Consuming Wizard.
I suspect you are sending wrong message to web service and thus due to data contract conflict you are getting exception from the service .
There are various articles which can guide you how to consume web service in BizTalk .Some of them are listed below .
How to Use the BizTalk WCF Service Consuming Wizard to Consume a WCF Service
BizTalk and WCF: Part I, Operation Patterns
Consuming WCF Service in BizTalk 2010 Orchestration
Thanks
Abhishek
Similar Messages
-
Hi All,
I am seeing the following error for SMS_AWEBSVC_CONTROL_MANAGER component with Message ID: 8100
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
awebsctl.log file has below errors:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Management point and Application Catalog Website Point are installed on the same Server where I am seeing the error for Application Catalog Web Service Point role. Management Point and Application Catalog Website Point are functioning properly. Application
Catalog Website is working.
Thanks & Regards, KedarHi Jason,
Application Catalog Web Service Point and Application Catalog Website Point; both are installed as per below configuration on same Server:
IIS Website: Default Web Site
Port Number: 80
with default value for Web Application Name configured.
For SMS_AWEBSVC_CONTROL_MANAGER component, I am getting below error in Component Status:
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which AWEBSVC is configured to communicate.
Solution: Verify that the designated Web Site is configured to use the same ports which AWEBSVC is configured to use.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
For more information, refer to Microsoft Knowledge Base.
And awebsctl.log has the below error lines:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
STATMSG: ID=8100
What should I check from IIS side?
Application Catalog Website is functioning properly.
Thanks & regards,
Kedar
Thanks & Regards, Kedar -
Msg=Unsupported response content type "text/html; 400 Bad Request
Hi All
this is the excpetion that I get when I am tring to run the
service MAnagerClient.
whether it is a list or deploy command :
can anybody help me?
Exception in thread "main" [SOAPException: faultCode=SOAP-
ENV:Protocol; msg=Unsupported response content type "text/html;
charset=iso-8859-1", must be: "text/xml". Response was:
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<HTML><HEAD>
<TITLE>400 Bad Request</TITLE>
</HEAD><BODY>
<H1>Bad Request</H1>
Your browser sent a request that this server could not
understand.<P>
<HR>
<ADDRESS>Oracle HTTP Server Powered by Apache/1.3.19 Server at
ranaldb Port 1324</ADDRESS>
</BODY></HTML>
at org.apache.soap.rpc.Call.getEnvelopeString
(Call.java:175)
at org.apache.soap.rpc.Call.invoke(Call.java:212)
at
org.apache.soap.server.ServiceManagerClient.invokeMethod
(ServiceManagerClient.java:129)
at org.apache.soap.server.ServiceManagerClient.list
(ServiceManagerClient.java:151)
at org.apache.soap.server.ServiceManagerClient.main
(ServiceManagerClient.java:237)Hello,
Your message contains a an HTTP 404 error so the URL that you are trying to access is not valid.
Can you check from a browser what is the response when you call the endpoint?
http://server:port/wedanyservices-WedanyServicesPro-context-root/MyWebService2
I believe that you do not have a service deployed at this URL this is why you have such response, and you cannot send another response.
Regards
Tugdual Grall -
Text Area 400 Bad Request Error in apex
Hi All,
I am having a problem with putting a large amount of text into text areas.
I did the following. Create a new page. Create an HTML region within that page. Create a text area within that region. Set the Maximum Width to 5000. Create a button within the region that submits the page and goes to the same page.
In fact, I have found that I can put up to 32512 bytes in the text area
But when i am trying to put less than 5000 it is throwing error, can any one help me out on this. Howe can restrict this scenrio.
Thanks,
Anoo..Anoo wrote:
I am having a problem with putting a large amount of text into text areas.
I did the following. Create a new page. Create an HTML region within that page. Create a text area within that region. Set the Maximum Width to 5000. Create a button within the region that submits the page and goes to the same page.
In fact, I have found that I can put up to 32512 bytes in the text area
But when i am trying to put less than 5000 it is throwing error, can any one help me out on this. Howe can restrict this scenrio.What error?
Where does Debug show the error is occurring?
See +{message:id=10397122}+ -
Intermittent 400 Bad Request - Invalid Verb SharePont 2010
Hey,
This is a long shot that someone has seen this or maybe can give some hints on finding the problem.
We are getting a rare (once per day) 400 Bad Request - Invalid Verb error in SharePoint 2010 during a POST - this has happened when adding a ListItem. Once the page is refreshed it works perfectly.
We have an on-premise instance of SharePoint 2010, it happens on all browsers.
The request header looks exactly the same for a succesful update as athe error. Any ideas where to start?
The response in Fiddler is
HTTP/1.1 400 Bad Request
Content-Type: text/html; charset=us-ascii
Server: Microsoft-HTTPAPI/2.0
Date: Thu, 06 Mar 2014 10:12:48 GMT
Connection: close
Content-Length: 326
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN""http://www.w3.org/TR/html4/strict.dtd">
<HTML><HEAD><TITLE>Bad Request</TITLE>
<META HTTP-EQUIV="Content-Type" Content="text/html; charset=us-ascii"></HEAD>
<BODY><h2>Bad Request - Invalid Verb</h2>
<hr><p>HTTP Error 400. The request verb is invalid.</p>
</BODY></HTML>
From the post
POST http://...PAGENAME.aspx HTTP/1.1
Accept: application/x-ms-application, image/jpeg, application/xaml+xml, image/gif, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
Accept-Language: en-GB
User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/4.0; GTB7.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; InfoPath.3)
Content-Type: multipart/form-data; boundary=---------------------------7de27631102b2
Accept-Encoding: gzip, deflate
Content-Length: 0
Host: XXX
Cookie: OfflineClientInstalled=1; s_cc=true; s_sq=wileyportal%3D%2526pid%253DFunctions%25257CTechnology%25257CPages%252520-%252520WGT%2526pidt%253D1%2526oid%253Dfunctiononclick()%25257BWzClick(event%25252C'g_07E87395550E47F7A3537187A352BC28')%25257D%2526oidt%253D2%2526ot%253DTABLE%2526oi%253D1939;
s_vnum=1395390204033%26vn%3D24; s_invisit=true; s_visit=1; WSS_KeepSessionAuthenticated={618701bc-c2b7-48e3-b7ff-a55e68ea6c5f}; ASP.NET_SessionId=4c0kd245pgy3kj55zxztti45; Ribbon.WikiPageTab=1259870|-1|444|-1204987594; previousLoggedInAs=; loginAsDifferentAttemptCount=;
http://url 09:29:20; Ribbon.Document=1276887|0|31|-564700907; Ribbon.Library=1276887|3|61|-564700907; Ribbon.Permission=1259887|-1|627|-233240519; Ribbon.List=1276887|4|58|-564700907; Ribbon.ListForm.Edit=682557|-1|364|-965405633; Ribbon.ListItem=1276887|-1|549|-564700907;
Ribbon.EditingTools.CPEditTab=1259870|-1|454|-1204987594; Ribbon.EditingTools.CPInsert=1259870|-1|783|-1204987594; Ribbon.Image.Image=1259870|-1|382|-1204987594
Connection: Keep-Alive
Pragma: no-cache
Authorization: NTLM TlRMTVNTUAABAAAAB4IIogAAAAAAAAAAAAAAAAAAAAAGAbEdAAAADw==
Referer: http://...page.aspxHi,
For narrowing down the issue, we need more investigations. Please provide more information about:
What web form were you posting? Is it an customized web form page? Or you could save more detail information in Fiddler and send to me via
[email protected] .
Since it is an intermittent issue, is there any application-layer awareness intermediate device such as proxy or reverse proxy/gateway between your client machine and SharePoint server? If so, please exclude the IP of SharePoint Server in the Proxy and
test the issue again.
Please check your IIS log and see if there is any error message related error 400.
Moreover, please check the performance of your SPS server, WFE and especially SQL server.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Error: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
Hi Gurus,
i am hardly fighting with this error in Communication Channel Monitoring:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
This is my scenario.
I do a File to SOAP Scenario. in SXI_MONITOR everything is fine.
My CommChan is a SOAP Receiver
HTTP
SOAP 1.1
Central Adapter Engine
Target URL is https --> i check url for correctness
Configure User Authentication is checked and username and pw are given and are correct.
Configure Certificate Authentication is checked are working
Configure Proxy is checked and Host and port are povided.
SOAP Action is provided
In Tab Module
if have this Processing Sequence
1 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean transform
2 sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean Local Enterprise Bean 1
and this Module configuration (and only this)
transform Transform.ContentType text/xml;charset=utf-8
(according to /people/sobhithalaxmi.kata/blog/2009/07/21/cost-free-edi-integration-using-message-transformation-bean)
As far as i understand that my http header should have Content-Type: text/xml;charset=utf-8 now. I don't understand why Communication Channel Monitoring shows an error according to content TEXT/HTML.
Can anyone help me with that?
Is it possible that Transform.ContentType does not work for SOAP Receiver Adapter?
is there any chance to view the HTTP-Header of the outgoing SOAP Request (with PI Transaction / Java Enironment) to convince myself that the HTTP Header is text/xml?
Thank you in advance and Best Regards
UdoHi Thanks for your fast replies.
The Provider of the Endpoint tells me that he needs text/xml as content-type. When I sent a message to the given Endpoint via SOAP UI I can see in the HTTP LOG of SOAP UI that the Endpoint is also sending text/xml back.
Below you find the Details log out of the CommChan Monitoring.
2011-04-29 11:37:45 Information The message status was set to TBDL.
2011-04-29 11:37:45 Information Retrying to deliver message to the application. Retry: 3
2011-04-29 11:37:45 Information The message was successfully retrieved from the receive queue.
2011-04-29 11:37:45 Information The message status was set to DLNG.
2011-04-29 11:37:45 Information Delivering to channel: getxxxxx_In <---- name of my SOAP Receiver CommChan
2011-04-29 11:37:45 Information Transform: using Transform.Class: $identity
2011-04-29 11:37:45 Information Transform: transforming the payload ...
2011-04-29 11:37:45 Information Transform: successfully transformed
2011-04-29 11:37:45 Information SOAP: request message entering the adapter with user J2EE_GUEST
2011-04-29 11:37:46 Error SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
2011-04-29 11:37:46 Information SOAP: sending a delivery error ack ...
2011-04-29 11:37:46 Information SOAP: sent a delivery error ack
2011-04-29 11:37:46 Error SOAP: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
2011-04-29 11:37:46 Error Adapter Framework caught exception: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
2011-04-29 11:37:46 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request.
2011-04-29 11:37:46 Error The message status was set to NDLV.
What i am missing is a hint on the Message Transform Bean and a on a successfull sending process.
What i also tried already:
i also activated the checkbox "Do not use SOAP Envelop" in CommChan Configuration. The Result you see below (the last log entry is on first line - so read from bottom to top)
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad Request
error in response
call completed
request entering
Message processing started
As you can see there is a "call completed" and "error in response" log entry. This is missing in in the first Log. So i guess the error is still in the sending process.
Installing additional Software on the PI and use them to find out what the HTTP Request is is not possible as system access is very strict and limited :/ -
Content-Type is net being set in HTTP header. Server returns 400 Bad Request error.
Hi,
I am trying to access an XML WebService. This service requires the content type of the request to be set to "text/xml". As you can see in the source code, I am setting the req.ContentType property to "text/xml".
However, this content type seems not to be added to the HTTP headers. The server returns a 400 Bad Request error as can be seen in the log.
I've attached a System.Net.trace log and it states:
[Public Key]
Algorithm: RSA
Length: 2048
Key Blob: 30 82 01 0a 02 82 01 01 00 bc 09 30 8a 1e 03 4d 7a ea 16 d3 a8 5e d8 5b 00 c4 8a c5 9f 26 bd 7d d6 cb 8b d0 db bd 93 2d 2b 3b 84 f6 20 79 83 34 67 51 37 21 ea 56 5e 18 d8 a3 db 72 43 0e 14 77 e2 64 cb 07 b6 2a 81 c7 f5 16 dd 19 c7 d9 68 0b 3a 81 5c f0 05 c9 ed 2b 37 00 31 41 37 8b 3a 73 4a 4d ab d7 d8 87 79 35 82 01 97 e3 3c be bb 84 e5 94 bb 87 52 e3 9f b5 fb 3e 33 38 c3 eb 73 42 ee ba 1e c5 4a 33 18 a1 0d 8a d2 10 a8 c5 3....
System.Net Information: 0 : [26780] SecureChannel#31884011 - Remote certificate was verified as valid by the user.
System.Net Information: 0 : [26780] ConnectStream#26966483 - Sending headers
API-VERSION: 1
Host: test.myhost.com
Content-Length: 329
Expect: 100-continue
Connection: Keep-Alive
System.Net Information: 0 : [26780] Connection#3888474 - Received status line: Version=1.1, StatusCode=100, StatusDescription=Continue.
System.Net Information: 0 : [26780] Connection#3888474 - Received headers
System.Net Information: 0 : [26780] Connection#3888474 - Received status line: Version=1.1, StatusCode=400, StatusDescription=Bad Request.
System.Net Information: 0 : [26780] Connection#3888474 - Received headers
0: Content-type
1: text/xml
X-Debug-Token: a810dc
X-Debug-Token-Link: /service/_profiler/a810dc
Connection: keep-alive
Content-Length: 3440
Cache-Control: no-cache
Content-Type: text/html; charset=UTF-8
Date: Tue, 14 Apr 2015 11:07:11 GMT
Server: Apache
...and here's the implementation of the web request:
private void ButtonSend_Click(object sender, EventArgs e)
WebHeaderCollection whCol = new WebHeaderCollection();
whCol.Add("API-VERSION", "1");
//whCol.Add("Content-Type", "text/xml; charset=UTF-8"); <-- That doesn't work in .NET. Content-Type has to be set on the ContentType-Property
string msg = _textBoxReq.Text;
HttpWebRequest req = (HttpWebRequest)WebRequest.Create(_textBoxURL.Text);
byte[] data = Encoding.UTF8.GetBytes(msg);
req.Method = "POST";
req.ContentType = "text/xml; charset=UTF-8";
req.ContentLength = data.Length;
req.Headers = whCol;
req.GetRequestStream().Write(data, 0, data.Length);
string xml = "";
try
using (HttpWebResponse resp = (HttpWebResponse)req.GetResponse())
using (System.IO.StreamReader sr = new System.IO.StreamReader(resp.GetResponseStream()))
xml = sr.ReadToEnd().Trim();
catch (WebException we)
using (System.IO.StreamReader sr = new System.IO.StreamReader(we.Response.GetResponseStream()))
xml = sr.ReadToEnd().Trim();
_textBoxRes.Text = xml;
Can anyone help?
Thanks,
MiRiHi _MiRichter,
Well Done!
Thank you very much for sharing the solution to us.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Program work before, without change but now web service get 400 bad request
i wrote a program to get data by java, using axis library, but recently, the program cannot access the data.
And it return a 400 bad request.
i tried to cap the header and context send out,result as below,
Content-Type=text/xml; charset=UTF-8
SOAPAction="document/urn:crmondemand/ws/user/10/2004:UserQueryPage"
User-Agent=Axis2
Host=(server address)
Transfer-Encoding=chunked
context
<?xml version="1.0" encoding="UTF-8" ?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<ns2:UserWS_UserQueryPage_Input xmlns:ns2="urn:crmondemand/ws/user/10/2004">
<ns2:UseChildAnd>false</ns2:UseChildAnd>
<ns2:PageSize>100</ns2:PageSize>
<ListOfUser xmlns="urn:/crmondemand/xml/user">
<User>
<UserId />
<Alias />
<EMailAddr />
<FirstName />
<LastName />
</User>
</ListOfUser>
<ns2:StartRowNum>0</ns2:StartRowNum>
</ns2:UserWS_UserQueryPage_Input>
</soapenv:Body>
</soapenv:Envelope>
other http request information cap:
getAuthType= null
getCharacterEncoding= UTF-8
getContentLength= -1
getContentType= text/xml; charset=UTF-8
getCookies= null
getLocale= zh_HK
getMethod= POST
getPathInfo= null
getProtocol= HTTP/1.1
getQueryString= null
getRemoteUser= null
getRequestURI= /Integration
getRequestURL= http://(server address and port)/Integration (https for real case, but to cap using http)
getServletPath= /Integration
getUserPrincipal= null
i cannot find out the reason to make the program not work, as i have not change any code and library
Edited by: user6642894 on 2009/3/23 上午 1:24
Edited by: paddy_yeung on 2009/3/23 下午 8:33Check the security mode, it should be “TransportCredentialOnly” and the clientCredentialType “NTLM” as shown in the blog post
http://blogs.msdn.com/b/kaevans/archive/2009/03/10/calling-sharepoint-lists-web-service-using-wcf.aspx
The other option is to add the service as
Web Reference and not as Service Reference.
In your ‘Add Service Reference’ window, click on ‘Advanced’ and choose ‘Add Web Reference’ – I prefer this for ASMX web services which makes it much easier. -
Http error 400 - bad request when calling external webservice
I have a problem connecting OSB to webservices exposed by Lotus Domino Server.
When I test the services with XMLSpy, it works fine. I started a project in OSB, and imported WSDL files from the server url. So far it worked. I built the corresponding Business services. When I tried to test these business services, i got error 400 from the domino server.
Does anyone have an idea to fix this problem?
My response document:
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server.generalException</faultcode>
<faultstring>org.xml.sax.SAXParseException: Korai fájlvége.</faultstring>
<detail/>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>HTTP/1.1 400 Bad Request
Server: Lotus-Domino
Date: Sat, 09 May 2009 19:57:19 GMT
Connection: close
Pragma: no-cache
Cache-Control: no-cache
Expires: Sat, 09 May 2009 19:57:19 GMT
Content-Type: text/html
Content-Length: 161
<HTML><HEAD><TITLE>Unable to Process Request</TITLE></HEAD><BODY><P>Http Status Code: 400</P><P>Reason: Unknown or unsupported protocol version</P></BODY></HTML>Yes, the problem should be in the request, but in the test console the request document looked fine.
I tried the following:
I tested the service with XMLSpy. I took the soap envelope generated, and pasted it into the business service test console. Then the payload should be the same in both cases, but it does not work. -
Test-ActiveSyncConnectivity fails with The remote server returned an error: (400) Bad Request.
Hi all,
I'm on the process of transition from Exchange 2003 to 2010, everything is going perfectly alright however ActiveSync is bugging me!
when I try to test activesync I get the following error:
[PS] C:\>Test-ActiveSyncConnectivity -MailboxCredential $user -TrustAnySSLCertificate |FL
RunspaceId : 136b8f68-26ec-4e29-a5bb-cf5ee816e04b
LocalSite : SITE
SecureAccess : True
VirtualDirectoryName :
Url :
UrlType : Unknown
Port : 0
ConnectionType : Plaintext
ClientAccessServerShortName : cas01
LocalSiteShortName : SITE
ClientAccessServer : CASSERVERNAME
Scenario : Options
ScenarioDescription : Issue an HTTP OPTIONS command to retrieve the Exchange ActiveSync protocol version.
PerformanceCounterName :
Result : Success
Error :
UserName : user1
StartTime : 12/12/2012 1:02:23 PM
Latency : 00:00:00.0312496
EventType : Success
LatencyInMillisecondsString : 31.25
Identity :
IsValid : True
RunspaceId : 136b8f68-26ec-4e29-a5bb-cf5ee816e04b
LocalSite : Reckon_NS
SecureAccess : True
VirtualDirectoryName :
Url :
UrlType : Unknown
Port : 0
ConnectionType : Plaintext
ClientAccessServerShortName : CASSERVERNAME
LocalSiteShortName : SITE
ClientAccessServer : CASSERVERNAME
Scenario : FolderSync
ScenarioDescription : Issue a FolderSync command to retrieve the folder hierarchy.
PerformanceCounterName : DirectPush Latency
Result : Failure
Error : [System.Net.WebException]: The remote server returned an error: (400) Bad Request.
HTTP response headers:
MS-Server-ActiveSync: 6.5.7638.1
Content-Length: 46
Cache-Control: private
Content-Type: text/html
Date: Wed, 12 Dec 2012 02:02:23 GMT
Server: Microsoft-IIS/7.5
X-AspNet-Version: 2.0.50727
X-Powered-By: ASP.NET
UserName : user1
StartTime : 12/12/2012 1:02:23 PM
Latency : -00:00:01
EventType : Error
LatencyInMillisecondsString :
Identity :
IsValid : True
environment:
Ex 2003 'Exchange' virtual directory permission: Integrated Windows Authentication, Basic
Ex 2003 'OMA' permission: Basic Authentication
Ex 2003 'ActiveSync' permission: Integrated, Basic
Ex 2010 successfully redirects users from 2010 to 2003 webmail if you login to OWA with a mailbox on 2003Yes Martina,
It has been done through ESM
I cannot test using testexchangeconnectivity.com since I cannot put the 2010 one into production, I will get into trouble if I change the DNS record to the new mail server!
Yes, EAS works perfectly fine with 2010 mailboxes.
OK.
It might be that it's not possible to run Test-ActiveSyncConnectivity against a mailbox stored in Exchange 2003.
Installing KB937031 and enabling Windows Authentication is really all that needs to be done in EX03, in order for Exchange 2010 to proxy the EAS requests.
Martina Miskovic -
Download Manager - failing with error 400 Bad Request
Each time I try to download some patches from the download basket I get this error: The request failed: 400. Download Manager says the files are Partially Downloaded but the downloads never complete (they just cycle round one after another attempting each download before failing). The connection to SAP ssems to be made correctly (see trace file extract below)
I'm running JRE version 1.4.2_12; download manager ver 2.1.130. I've tried uninstalling & reinstalling JRE & download manager (numerous times). Does anyone have any suggestions about what might be the cause?
Thanks, Chris
PS - This is the relevant part of the trace file:
24-Aug-2007 09:29:06 Opening connection to 'https://smpdla.sap.com:443/00000084/217/KGPHA68.CAR?object_id=011000358700000405252007E&filepath=00000084\217\KGPHA68.CAR&uid=S0003245349'
24-Aug-2007 09:29:06 Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:13 A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:13 Response received: 400 Bad Request
24-Aug-2007 09:29:13 Response Http Headers:
24-Aug-2007 09:29:13 Server=AkamaiGHost
24-Aug-2007 09:29:13 Mime-Version=1.0
24-Aug-2007 09:29:13 Content-Type=text/html
24-Aug-2007 09:29:13 Content-Length=340
24-Aug-2007 09:29:13 Expires=Fri, 24 Aug 2007 08:28:49 GMT
24-Aug-2007 09:29:13 Date=Fri, 24 Aug 2007 08:28:49 GMT
24-Aug-2007 09:29:13 Connection=close
24-Aug-2007 09:29:13 Response code: 400
24-Aug-2007 09:29:18 Notifying subscribers of download state ...
24-Aug-2007 09:29:18 The download has terminated ...
24-Aug-2007 09:29:18 getUserProxy: true
24-Aug-2007 09:29:18 getEffectiveProtocol: http
24-Aug-2007 09:29:18 detected: http / https w/o proxy request
24-Aug-2007 09:29:18 SMPResponse::sendRequestNormal
24-Aug-2007 09:29:18 Opening connection to 'http://service.sap.com:80/~form/download_basket?_MODE=OBJECT_VERSION&OBJID=011000358700000485532007E&'
24-Aug-2007 09:29:18 Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:25 A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:25 Redirecting to 'https://WEBSMP108.SAP-AG.DE/~form/download_basket?_MODE=OBJECT_VERSION&OBJID=011000358700000485532007E&'...
24-Aug-2007 09:29:25 getUserProxy: true
24-Aug-2007 09:29:25 getEffectiveProtocol: https
24-Aug-2007 09:29:25 detected: http / https w/o proxy request
24-Aug-2007 09:29:25 SMPResponse::sendRequestNormal
24-Aug-2007 09:29:25 Opening connection to 'https://WEBSMP108.SAP-AG.DE/~form/download_basket?_MODE=OBJECT_VERSION&OBJID=011000358700000485532007E&'
24-Aug-2007 09:29:25 Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:25 A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:25 Response received: 200 OK
24-Aug-2007 09:29:25 Response Http Headers:
24-Aug-2007 09:29:25 Date=Fri, 24 Aug 2007 08:29:02 GMT
24-Aug-2007 09:29:25 Server=Microsoft-IIS/6.0
24-Aug-2007 09:29:25 Content-Type=text/plain
24-Aug-2007 09:29:25 Content-Length=44
24-Aug-2007 09:29:25 getUserProxy: true
24-Aug-2007 09:29:25 getEffectiveProtocol: http
24-Aug-2007 09:29:25 detected: http / https w/o proxy request
24-Aug-2007 09:29:25 SMPResponse::sendRequestNormal
24-Aug-2007 09:29:25 Opening connection to 'http://service.sap.com:80/~form/download_basket?_MODE=DOWNLOAD_START2&OBJID=011000358700000485532007E&_VERSION=2.1.130&'
24-Aug-2007 09:29:25 Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:25 A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:25 Redirecting to 'https://WEBSMP209.SAP-AG.DE/~form/download_basket?_MODE=DOWNLOAD_START2&OBJID=011000358700000485532007E&_VERSION=2.1.130&'...
24-Aug-2007 09:29:25 getUserProxy: true
24-Aug-2007 09:29:25 getEffectiveProtocol: https
24-Aug-2007 09:29:25 detected: http / https w/o proxy request
24-Aug-2007 09:29:25 SMPResponse::sendRequestNormal
24-Aug-2007 09:29:25 Opening connection to 'https://WEBSMP209.SAP-AG.DE/~form/download_basket?_MODE=DOWNLOAD_START2&OBJID=011000358700000485532007E&_VERSION=2.1.130&'
24-Aug-2007 09:29:25 Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:26 A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:26 Response received: 200 OK
24-Aug-2007 09:29:26 Response Http Headers:
24-Aug-2007 09:29:26 Date=Fri, 24 Aug 2007 08:29:03 GMT
24-Aug-2007 09:29:26 Server=Microsoft-IIS/6.0
24-Aug-2007 09:29:26 Content-Type=text/html
24-Aug-2007 09:29:26 Content-Length=2416
24-Aug-2007 09:29:26 Number of URLs: 1
24-Aug-2007 09:29:26 Description lines: 56
24-Aug-2007 09:29:26 Adding HTTP1/1 Header: Range: bytes=0-*
24-Aug-2007 09:29:26 getUserProxy: true
24-Aug-2007 09:29:26 getEffectiveProtocol: https
24-Aug-2007 09:29:26 detected: http / https w/o proxy request
24-Aug-2007 09:29:26 SMPResponse::sendRequestNormal
24-Aug-2007 09:29:26 Opening connection to 'https://smpdla.sap.com:443/00000085/652/KGPHA69.CAR?object_id=011000358700000485532007E&filepath=00000085\652\KGPHA69.CAR&uid=S0003245349'
24-Aug-2007 09:29:26 Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:33 A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:33 Response received: 400 Bad Request
24-Aug-2007 09:29:33 Response Http Headers:Yes - I've checked the address w're pointing to & have rechecked several times with our network people re: the proxy.
The trace seems to show that we're certainly making the initial connections to SAP OK - it just gives up after a few redirections.
Chris -
Apache as reverse proxy - 400 Bad request
Hi all,
I'm configured apache as reverse proxy according to this blog:
The Reverse Proxy Series -- Part 3: Apache as a reverse-proxy
When I try to navigate http://testcomp/irj I get "400 - Bad request"
See exception;
<i>Message : User Guest, IP address
Cannot parse the http request. Http error response [400 Bad Request] will be returned. Request is [Host: sapportal:50000
Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, /
Accept-Language: en,he;q=0.5
Accept-Encoding: gzip, deflate
User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; .NET CLR 1.1.4322; FDM; .NET CLR 2.0.50727)
Max-Forwards: 10
Via: 1.1 localhost
X-Forwarded-For: 10.0.0.4
X-Forwarded-Host: 10.0.0.6
X-Forwarded-Server: localhost
Connection: Keep-Alive
GET /irj HTTP/1.1
Host: sapportal:50000
Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, /
Accept-Language: en,he;q=0.5
Accept-Encoding: gzip, deflate
User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; .NET CLR 1.1.4322; FDM; .NET CLR 2.0.50727)
Max-Forwards: 10
Via: 1.1 localhost
X-Forwarded-For: 10.0.0.4
X-Forwarded-Host: 10.0.0.6
X-Forwarded-Server: localhost
Connection: Keep-Alive
com.sap.engine.services.httpserver.exceptions.HttpIllegalArgumentException: Incompatible field content in the MIME header.
at com.sap.engine.services.httpserver.lib.headers.MimeHeaderField.parse(MimeHeaderField.java:364)
at com.sap.engine.services.httpserver.lib.headers.MimeHeaders.init(MimeHeaders.java:504)
at com.sap.engine.services.httpserver.server.RequestAnalizer.initialize(RequestAnalizer.java:196)
at com.sap.engine.services.httpserver.server.Client.initialize(Client.java:84)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:143)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Severity : Error
Category :
Location : com.sap.engine.services.httpserver
Application :
Thread : SAPEngine_Application_Thread[impl:3]_32
Datasource : 9332850:C:usrsapPD9JC00j2eeclusterserver0logdefaultTrace.trc
Message ID : 000C29EFE9A300570000002D00000B9000043A81D3311894
Source Name : com.sap.engine.services.httpserver
Argument Objs :
Arguments :
Dsr Component :
Dsr Transaction : 5359e85066e411dcbf6b000c29efe9a3
Dsr User :
Indent : 0
Level : 0
Message Code :
Message Type : 0
Relatives :
Resource Bundlename :
Session : 2
Source : com.sap.engine.services.httpserver
ThreadObject : SAPEngine_Application_Thread[impl:3]_32
Transaction :
User : Guest</i>
The lines I added to http.conf
<i>#Enable reverse-proxying
ProxyVia on
ProxyTimeout 600
#disable forward-proxying
ProxyRequests Off
#proxy /irj both ways
ProxyPass /irj http://sapportal:50000/irj
ProxyPassReverse /irj http://testcomp/irj
#proxy /logon both ways
ProxyPass /logon http://sapportal:50000/logon
ProxyPassReverse /logon http://testcomp/logon</i>
I tried with apache version 2.2.3 & 2.0.59 with no success.
My J2EE/Portal version is 6.17.
Since this is a testing environment the two computers are under the same workgroup (no domain).
If I naviagte directly to the portal (without the reverse proxy) everything is working.
How can I solve it?
Regards,
OmriHi Jakub,
Thanks for the answer.
It's not working for me...
I'm attaching my httpd.conf file.
Also, what apache version do you use?
Can you send me your post your httpd.conf file?
Thanks,
Omri
httpd.conf
This is the main Apache HTTP server configuration file. It contains the
configuration directives that give the server its instructions.
See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
In particular, see
<URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
for a discussion of each configuration directive.
Do NOT simply read the instructions in here without understanding
what they do. They're here only as hints or reminders. If you are unsure
consult the online docs. You have been warned.
Configuration and logfile names: If the filenames you specify for many
of the server's control files begin with "/" (or "drive:/" for Win32), the
server will use that explicit path. If the filenames do not begin
with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
with ServerRoot set to "c:/apache" will be interpreted by the
server as "c:/apache/logs/foo.log".
NOTE: Where filenames are specified, you must use forward slashes
instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
If a drive letter is omitted, the drive on which Apache.exe is located
will be used by default. It is recommended that you always supply
an explicit drive letter in absolute paths, however, to avoid
confusion.
ThreadsPerChild: constant number of worker threads in the server process
MaxRequestsPerChild: maximum number of requests a server process serves
ThreadsPerChild 250
MaxRequestsPerChild 0
ServerRoot: The top of the directory tree under which the server's
configuration, error, and log files are kept.
Do not add a slash at the end of the directory path. If you point
ServerRoot at a non-local disk, be sure to point the LockFile directive
at a local disk. If you wish to share the same ServerRoot for multiple
httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "c:/apache"
Listen: Allows you to bind Apache to specific IP addresses and/or
ports, instead of the default. See also the <VirtualHost>
directive.
Change this to Listen on specific IP addresses as shown below to
prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#Listen 12.34.56.78:80
Listen 80
Dynamic Shared Object (DSO) Support
To be able to use the functionality of a module which was built as a DSO you
have to place corresponding `LoadModule' lines at this location so the
directives contained in it are actually available before they are used.
Statically compiled modules (those listed by `httpd -l') do not need
to be loaded here.
Example:
LoadModule foo_module modules/mod_foo.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
<b>LoadModule proxy_module modules/mod_proxy.so</b>
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
<b>LoadModule proxy_http_module modules/mod_proxy_http.so</b>
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
'Main' server configuration
The directives in this section set up the values used by the 'main'
server, which responds to any requests that aren't handled by a
<VirtualHost> definition. These values also provide defaults for
any <VirtualHost> containers you may define later in the file.
All of these directives may appear inside <VirtualHost> containers,
in which case these default settings will be overridden for the
virtual host being defined.
ServerAdmin: Your address, where problems with the server should be
e-mailed. This address appears on some server-generated pages, such
as error documents. e.g. [email protected]
ServerAdmin @@ServerAdmin@@
ServerName gives the name and port that the server uses to identify itself.
This can often be determined automatically, but we recommend you specify
it explicitly to prevent problems during startup.
If your host doesn't have a registered DNS name, enter its IP address here.
ServerName localhost:80
DocumentRoot: The directory out of which you will serve your
documents. By default, all requests are taken from this directory, but
symbolic links and aliases may be used to point to other locations.
DocumentRoot "c:/apache/htdocs"
Each directory to which Apache has access can be configured with respect
to which services and features are allowed and/or disabled in that
directory (and its subdirectories).
First, we configure the "default" to be a very restrictive set of
features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
Satisfy all
</Directory>
Note that from this point forward you must specifically allow
particular features to be enabled - so if something's not working as
you might expect, make sure that you have specifically enabled it
below.
This should be changed to whatever you set DocumentRoot to.
<Directory "c:/apache/htdocs">
Possible values for the Options directive are "None", "All",
or any combination of:
Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
Note that "MultiViews" must be named explicitly --- "Options All"
doesn't give it to you.
The Options directive is both complicated and important. Please see
http://httpd.apache.org/docs/2.2/mod/core.html#options
for more information.
Options Indexes FollowSymLinks
AllowOverride controls what directives may be placed in .htaccess files.
It can be "All", "None", or any combination of the keywords:
Options FileInfo AuthConfig Limit
AllowOverride None
Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
DirectoryIndex: sets the file that Apache will serve if a directory
is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
The following lines prevent .htaccess and .htpasswd files from being
viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
</FilesMatch>
ErrorLog: The location of the error log file.
If you do not specify an ErrorLog directive within a <VirtualHost>
container, error messages relating to that virtual host will be
logged here. If you do define an error logfile for a <VirtualHost>
container, that host's errors will be logged there and not here.
ErrorLog logs/error.log
LogLevel: Control the number of messages logged to the error_log.
Possible values include: debug, info, notice, warn, error, crit,
alert, emerg.
LogLevel warn
<IfModule log_config_module>
The following directives define some format nicknames for use with
a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%You need to enable mod_logio.c to use %I and %Oi\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
The location and format of the access logfile (Common Logfile Format).
If you do not define any access logfiles within a <VirtualHost>
container, they will be logged here. Contrariwise, if you do
define per-<VirtualHost> access logfiles, transactions will be
logged therein and not in this file.
CustomLog logs/access.log common
If you prefer a logfile with access, agent, and referer information
(Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
</IfModule>
<IfModule alias_module>
Redirect: Allows you to tell clients about documents that used to
exist in your server's namespace, but do not anymore. The client
will make a new request for the document at its new location.
Example:
Redirect permanent /foo http://www.example.com/bar
Alias: Maps web paths into filesystem paths and is used to
access content that does not live under the DocumentRoot.
Example:
Alias /webpath /full/filesystem/path
If you include a trailing / on /webpath then the server will
require it to be present in the URL. You will also likely
need to provide a <Directory> section to allow access to
the filesystem path.
ScriptAlias: This controls which directories contain server scripts.
ScriptAliases are essentially the same as Aliases, except that
documents in the target directory are treated as applications and
run by the server when requested rather than as documents sent to the
client. The same rules about trailing "/" apply to ScriptAlias
directives as to Alias.
ScriptAlias /cgi-bin/ "c:/apache/cgi-bin/"
</IfModule>
"c:/apache/cgi-bin" should be changed to whatever your ScriptAliased
CGI directory exists, if you have that configured.
<Directory "c:/apache/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
Apache parses all CGI scripts for the shebang line by default.
This comment line, the first line of the script, consists of the symbols
pound (#) and exclamation followed by the path of the program that
can execute this specific script. For a perl script, with perl.exe in
the C:\Program Files\Perl directory, the shebang line should be:
#!c:/program files/perl/perl
Note you mustnot_ indent the actual shebang line, and it must be the
first line of the file. Of course, CGI processing must be enabled by
the appropriate ScriptAlias or Options ExecCGI directives for the files
or directory in question.
However, Apache on Windows allows either the Unix behavior above, or can
use the Registry to match files by extention. The command to execute
a file of this type is retrieved from the registry by the same method as
the Windows Explorer would use to handle double-clicking on a file.
These script actions can be configured from the Windows Explorer View menu,
'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
button allows you to modify the Actions, of which Apache 1.3 attempts to
perform the 'Open' Action, and failing that it will try the shebang line.
This behavior is subject to change in Apache release 2.0.
Each mechanism has it's own specific security weaknesses, from the means
to run a program you didn't intend the website owner to invoke, and the
best method is a matter of great debate.
To enable the this Windows specific behavior (and therefore -disable- the
equivilant Unix behavior), uncomment the following directive:
#ScriptInterpreterSource registry
The directive above can be placed in individual <Directory> blocks or the
.htaccess file, with either the 'registry' (Windows behavior) or 'script'
(Unix behavior) option, and will override this server default option.
DefaultType: the default MIME type the server will use for a document
if it cannot otherwise determine one, such as from filename extensions.
If your server contains mostly text or HTML documents, "text/plain" is
a good value. If most of your content is binary, such as applications
or images, you may want to use "application/octet-stream" instead to
keep browsers from trying to display binary files as though they are
text.
DefaultType text/plain
<IfModule mime_module>
TypesConfig points to the file containing the list of mappings from
filename extension to MIME-type.
TypesConfig conf/mime.types
AddType allows you to add to or override the MIME configuration
file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
AddEncoding allows you to have certain browsers uncompress
information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
If the AddEncoding directives above are commented-out, then you
probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
AddHandler allows you to map certain file extensions to "handlers":
actions unrelated to filetype. These can be either built into the server
or added with the Action directive (see below)
To use CGI scripts outside of ScriptAliased directories:
(You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
For type maps (negotiated resources):
#AddHandler type-map var
Filters allow you to process content before it is sent to the client.
To parse .shtml files for server-side includes (SSI):
(You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
The mod_mime_magic module allows the server to use various hints from the
contents of the file itself to determine its type. The MIMEMagicFile
directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
Customizable error responses come in three flavors:
1) plain text 2) local redirects 3) external redirects
Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
EnableMMAP and EnableSendfile: On systems that support it,
memory-mapping or the sendfile syscall is used to deliver
files. This usually improves server performance, but must
be turned off when serving from networked-mounted
filesystems or if support for these functions is otherwise
broken on your system.
#EnableMMAP off
#EnableSendfile off
Supplemental configuration
The configuration files in the conf/extra/ directory can be
included to add extra features or to modify the default configuration of
the server, or you may simply copy their contents here and change as
necessary.
Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
Language settings
#Include conf/extra/httpd-languages.conf
User home directories
#Include conf/extra/httpd-userdir.conf
Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
Virtual hosts
#Include conf/extra/httpd-vhosts.conf
Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
Various default settings
#Include conf/extra/httpd-default.conf
Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
Note: The following must must be present to support
starting without SSL on platforms with no /dev/random equivalent
but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
<b>ProxyPreserveHost On
ProxyVia on
ProxyTimeout 600
#disable forward-proxying
ProxyRequests Off
#proxy /irj both ways
ProxyPass /irj http://sapportal:50000/irj
ProxyPassReverse /irj http://sapportal:50000/irj
#ProxyPassReverse /irj http://testcomp/irj
#proxy /logon both ways
ProxyPass /logon http://sapportal:50000/logon
ProxyPassReverse /logon http://sapportal:50000/logon
#ProxyPassReverse /logon http://testcomp/logon</b> -
An unhandled exception has been thrown in the ESB system-400 Bad request
Hi,
When i try to call a ESB Routing Service in a BPEL Flow, i am getting the error below,
An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 400 Bad request
i tried to call same routing servive via SoapUI and i got the same error.
Any ideas welcome.
<messages><input><Invoke_SFA_Persist_InputVariable><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="ListOfTcAccountInterface"><ListOfTcAccountInterface xmlns:ns2="http://turkcell.com.tr/esb/Common_BO_OUTBOUND_BO_ROUTING_SERVICE" xmlns:ns1="http://oracle.com/esb/namespaces/Common_BO_OUTBOUND_BO_ROUTING_SERVICE" xmlns:inp1="http://www.turkcell.com.tr/xml/BO_Account_Interface" xmlns="http://www.turkcell.com.tr/xml/BO_Account_Interface">
<inp1:Header>
<inp1:Transaction_Id>1120000000000279727</inp1:Transaction_Id>
<inp1:System_Id>1001</inp1:System_Id>
<inp1:Process_Code>BO_FL1003_SUBSCRIBE_SERVICE_PROCESS</inp1:Process_Code>
<inp1:Transaction_Date>8/8/2008 12:47:47</inp1:Transaction_Date>
<inp1:Operation_Type>SubscribeService</inp1:Operation_Type>
</inp1:Header>
<inp1:TcAccountIntegration>
<inp1:IntegrationId>16853952</inp1:IntegrationId>
<inp1:UUID>1E01D469-4189-11dc-A07A-00144F6ABAE8</inp1:UUID>
<inp1:ListOfTcAgreementIntegration>
<inp1:TcAgreementIntegration>
<inp1:IntegrationId>16903908</inp1:IntegrationId>
<inp1:AgreementStartDate>7/28/1996 0:0:0</inp1:AgreementStartDate>
<inp1:AgreementStatus>0</inp1:AgreementStatus>
<inp1:ListOfTcAgreementAssetIntegration>
<inp1:TcAgreementAssetIntegration>
<inp1:BarringStatus/>
<inp1:AssetNumber>16903908</inp1:AssetNumber>
<inp1:AdditionalInfo/>
<inp1:AssetDescription>PostPaid GSM</inp1:AssetDescription>
<inp1:MSISDN>5322776665</inp1:MSISDN>
<inp1:Reason/>
<inp1:BSCSCustomerId>512914</inp1:BSCSCustomerId>
<inp1:BSCSCO_ID>438781</inp1:BSCSCO_ID>
<inp1:Status>0</inp1:Status>
<inp1:Type>1</inp1:Type>
<inp1:ListOfTcChildAssetIntegration>
<inp1:TcChildAssetIntegration>
<inp1:BarringStatus/>
<inp1:AssetNumber>437894069</inp1:AssetNumber>
<inp1:AdditionalInfo>9999</inp1:AdditionalInfo>
<inp1:AssetDescription>FCT</inp1:AssetDescription>
<inp1:MSISDN/>
<inp1:Reason>Service Subscription</inp1:Reason>
<inp1:BSCSCustomerId>1</inp1:BSCSCustomerId>
<inp1:BSCSCO_ID>9999</inp1:BSCSCO_ID>
<inp1:Status>0</inp1:Status>
<inp1:Type>52</inp1:Type>
</inp1:TcChildAssetIntegration>
</inp1:ListOfTcChildAssetIntegration>
</inp1:TcAgreementAssetIntegration>
</inp1:ListOfTcAgreementAssetIntegration>
</inp1:TcAgreementIntegration>
</inp1:ListOfTcAgreementIntegration>
</inp1:TcAccountIntegration>
</ListOfTcAccountInterface>
</part></Invoke_SFA_Persist_InputVariable></input><fault><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>ESBMessageProcessingFailed</code>
</part><part name="summary"><summary>null</summary>
</part><part name="detail"><detail><detail>
<EventName xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">Common.BO_OUTBOUND.BO_SFA.BO_Persist_Account_CRM_Routing_Service.Persist</EventName>
<Cause xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">An unhandled exception has been thrown in the ESB system. The exception reported is: "oracle.tip.esb.server.common.exceptions.BusinessEventRetriableException: An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 400 Bad request
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1723)
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1465)
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeRequestResponseOperation(WSIFOperation_JaxRpc.java:1186)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:507)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:430)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:447)
at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:184)
at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:112)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:158)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:121)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1986)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1465)
at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:105)
at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(EsbRouterSubscription.java:273)
at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(EventDispatcher.java:138)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscription(InitialEventDispatcher.java:297)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscriptions(InitialEventDispatcher.java:279)
at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(EventDispatcher.java:94)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:118)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1986)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1465)
at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.raiseEvent(EventOracleSoapProvider.java:343)
at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.processMessage(EventOracleSoapProvider.java:190)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:956)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:466)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:190)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:539)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:430)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:447)
at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:184)
at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:112)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:158)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:121)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1986)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1465)
at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:105)
at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(EsbRouterSubscription.java:273)
at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(EventDispatcher.java:138)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscription(InitialEventDispatcher.java:297)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscriptions(InitialEventDispatcher.java:279)
at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(EventDispatcher.java:94)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:118)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1986)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1465)
at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.raiseEvent(EventOracleSoapProvider.java:343)
at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.processMessage(EventOracleSoapProvider.java:190)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:956)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:466)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:190)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: org.collaxa.thirdparty.apache.wsif.WSIFException: exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 400 Bad request
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1723)
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1465)
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeRequestResponseOperation(WSIFOperation_JaxRpc.java:1186)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:507)
... 39 more
</Cause>
</detail>
</detail>
</part></remoteFault></fault></messages>Is this error just for this message, or all messages?
Is the xml valid against the payload. You will need to use a tool like XML spy to check.
Are you able to see the response coming back, if so does it conform to the response schema.
cheers
James -
SIP/2.0 400 Bad Request - 'Malformed/Missing URL'
I have a problem with inbounds calls from an IP PBX to a callmanager 7.X. The call can not be stablished. This is the capture log of the call
***************************** SIP message buffer start *****************************
INVITE sip:172.24.164.7 SIP/2.0
Via: SIP/2.0/UDP 10.151.100.12:5060;rport;branch=z9hG4bKEPSVBUS863e8efa-5b23-4053-89c5-67c08916ac85
To:
From: ;tag=13946664875f3f5b48-2149-4cab-9f44-32090d7cf876
CSeq: 487 INVITE
Call-ID: [email protected]ygi-con...
Allow: INVITE, ACK, CANCEL, BYE, OPTIONS, INFO, NOTIFY, REFER, MESSAGE, UPDATE
Contact:
Content-Type: application/sdp
Supported: replaces, norefersub
User-Agent: Epygi Quadro SIP User Agent/v5.3.2 (MIDIGW)
Max-Forwards: 70
Content-Length: 390
v=0
o=- 170 395 IN IP4 10.151.100.12
s=-
c=IN IP4 10.151.100.12
t=0 0
m=audio 6052 RTP/AVP 0 8 96 97 2 98 18 102 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:96 G726-16/8000
a=rtpmap:97 G726-24/8000
a=rtpmap:2 G726-32/8000
a=rtpmap:98 G726-40/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:102 iLBC/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
***************************** SIP message buffer end ******************************
13:57:05 Receive SIP message # (31/03/2014 18:57:05:315 GMT) # UDP # 494 bytes # buff size 1 # from: 172.24.164.7:5060 # to: 10.151.100.12:5060
***************************** SIP message buffer start *****************************
SIP/2.0 400 Bad Request - 'Malformed/Missing URL'
Reason: Q.850;cause=100
Date: Mon, 31 Mar 2014 18:57:17 GMT
From: ;tag=13946664875f3f5b48-2149-4cab-9f44-32090d7cf876
Allow-Events: presence
Content-Length: 0
To: ;tag=1787501341
Call-ID: [email protected]ygi-con...
Via: SIP/2.0/UDP 10.151.100.12:5060;rport;branch=z9hG4bKEPSVBUS863e8efa-5b23-4053-89c5-67c08916ac85
CSeq: 487 INVITE
***************************** SIP message buffer end ******************************
13:57:05 TLayer::MsgToTU # Msg type: 400 # TID: 286 # DID: 285
13:57:05 Try to send SIP message # (31/03/2014 18:57:05:316 GMT) # UDP # 459 bytes # buff size 1 # from: 10.151.100.12:5060 # to: 172.24.164.7:5060
***************************** SIP message buffer start *****************************
ACK sip:172.24.164.7 SIP/2.0
Via: SIP/2.0/UDP 10.151.100.12:5060;rport;branch=z9hG4bKEPSVBUS863e8efa-5b23-4053-89c5-67c08916ac85
To: ;tag=1787501341
From: ;tag=13946664875f3f5b48-2149-4cab-9f44-32090d7cf876
CSeq: 487 ACK
Call-ID: [email protected]ygi-con...
User-Agent: Epygi Quadro SIP User Agent/v5.3.2 (MIDIGW)
Max-Forwards: 70
Content-Length: 0
***************************** SIP message buffer end ******************************
13:57:05 SipSessDlg::Inc4xxProc # Got 400 message # OID: 285 # SID: 16249136886150664
13:57:05 SipSessDlg::ErrorHandling # Error: Negotiation, Move to terminate state # OID: 285 # SID: 16249136886150664
13:57:05 UA --> CM # ReportError # Error: Negotiation # Sip error: 400 # SID: 16249136886150664
13:57:05 SipSessDlg::TerminateTransactions # OID: 285 # SIPID: [email protected]ygi-con... # SID: 16249136886150664
Can anyone help me?Hello, did you edit the logs before posting it here? if not, then we are missing the fields in the incoming INVITE message from PBX.
No phone numbers in the Invite header and From & To fields are also missing.
Please check with the PBX.
***************************** SIP message buffer start *****************************
INVITE sip:172.24.164.7 SIP/2.0 ----> Number missing here
Via: SIP/2.0/UDP 10.151.100.12:5060;rport;branch=z9hG4bKEPSVBUS863e8efa-5b23-4053-89c5-67c08916ac85
To: ----> Number missing here
From: ;tag=13946664875f3f5b48-2149-4cab-9f44-32090d7cf876 ----> Number missing here
CSeq: 487 INVITE
Call-ID: [email protected]ygi-config.loc
Allow: INVITE, ACK, CANCEL, BYE, OPTIONS, INFO, NOTIFY, REFER, MESSAGE, UPDATE
Contact:
Content-Type: application/sdp
Supported: replaces, norefersub
User-Agent: Epygi Quadro SIP User Agent/v5.3.2 (MIDIGW)
Max-Forwards: 70
Content-Length: 390
v=0
o=- 170 395 IN IP4 10.151.100.12
s=-
c=IN IP4 10.151.100.12
t=0 0
m=audio 6052 RTP/AVP 0 8 96 97 2 98 18 102 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:96 G726-16/8000
a=rtpmap:97 G726-24/8000
a=rtpmap:2 G726-32/8000
a=rtpmap:98 G726-40/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:102 iLBC/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
//Suresh
Please rate all the useful posts -
Application Express 3.1.1.00.09
We have some users who are experiencing what appears to be a browser problem in one of our APEX applications.
When clicking on any button that does an insert or update to the database some users get an HTTP-400 Bad Request error message. The database does not get updated and anything they click on after that shows that message. In most cases we have been able to restore the user’s browser to the default settings and the issue is resolved. However, we were not able to isolate which browser setting is causing the issue. We have seen the issue in IE 6, IE 7 and IE 8.
Here’s the error we see in the Apache server error log (minus the date time stamp and IP addresses):
mod_plsql: /pls/ax_tastest/wwv_flow.accept HTTP-400 Invalid name
Does anyone else have a solution for this? Know what's causing it?HTTP 400 Bad Request Error from APEX 3.1.1.00.09.
We were able to determine that only PCs which had the Google toolbar installed were getting the HTTP 400 Bad Request Error from a particular page in one of our applications. Further testing revealed that turning off the ‘auto-fill’ feature of the Google toolbar would prevent the error from occurring and the application would behave normally. We were able to identify a specific item on the page that was the root cause. The item was using the type “Text area with HTML Editor” which has been deprecated. We changed the page item type to “HTML editor standard” and this has resolved the issue with or without the Google Toolbar and auto-fill feature enabled.
Summary:
• Browser setting: Google toolbar enabled with auto-fill enabled.
Apex page item of type: ‘Text area with HTML Editor’.
When a user clicks on a button in the page, that executes a page process, it results in HTTP 400 error.
• Browser setting: Google toolbar enabled with auto-fill disabled.
Apex page item of type: ‘Text area with HTML Editor’.
When a user clicks on a button in the page, everything goes through correctly and there is no error.
• Browser setting: Google toolbar enabled with auto-fill disabled or enabled.
Apex page item of type: ‘HTML Editor Standard’.
When a user clicks on a button in the page, everything goes through correctly and there is no error.
Maybe you are looking for
-
I've designed a magazine prototype for a client and I need it to flip pages like a book for her sales team to show on ipads. What software will do this?
-
Differece bet GLPCA and GLPCT in ECC 6 with classic PCA
Hi Ajay and Experts, Thank you for helping me till now for all the issues in COPC and COPA we are all set. I found once issue in PCA today as below, can anyone please give inputs. I have reviewed all the threads but i want to specify my case first. W
-
Hello everyone, I'm looking for a way to use a km browser as a ui element to select a km resource. The first way that comes to mind is to implement it as a button which fires a plug to a view which allows to browse and select a resource, and upon sel
-
Sending query result as html email
hi, I have requirement to send query result as html emial to user, is there a possibility to send it? database is 11.2.3 thanks, 7Z
-
Base Time Unit for Axes Format on CNiGraph
I am graphing many points of data over a time of several days long. I was wondering if there is a way to format the Axes on the Graph to display a base unit of hours instead of days. It is a simple enough task to convert between days and hours, but I