Content wronfully rejected by moderator - need assistance ASAP

Hi,
I have received notifications about 2 of my blog posts (below) asking to repost as discussions when they are clearly NOT discussions and the content is perfectly suitable for a blog.
I would appreciate if someone helps making them visible again in SCN ASAP - the blogs contain registration links to enablement sessions for partners so this is preventingthem from registering and obtaining valuable information.
Additionally, how can I get in the list to be exempt from moderator reviews?
Pretty much all my posts in SCN are about enablement sessions...and they are rightly posted as blogs! This is time sensitive content as there
is a limited time to register so I would like to avoid this happening again…please advise.
Rejected blog posts
You
have received this email because the content you posted below has been rejected
by our moderators and is no longer visible in the community. Please see our Rules of Engagement for more
information on why content is rejected.
REGISTER NOW! Top 3 things to sell to Wealth Managers, Feb 26 & Feb 27 - posted Feb 17, 2014 10:26 PM
REGISTER NOW! SAP Solvency Management for Insurance, Feb 17, 2014 - posted 10:04 PM

Hi - I've notified my colleagues overseeing moderation on SCN.
In additional to the The SCN Rules of Engagement, you should also consult this document: The Difference between a Discussion, Blog Post, Document and Wiki. It's very likely that the moderators interpreted that your blog post really fits an announcement and a discussion thread unmarked as a question is the recommended content type for these.

Similar Messages

Need assistance ASAP: How to MAP tool 600 standalone laptops.

have a customer with hundreds of laptop users who very seldom connect to their corporate network. Need ideas ASAP around how to inventory standalone laptops.

This scenario is best handled by an agent based/Internet based system like Microsoft Intune. An agentless system like MAP is not a good fit for this environment. Your choices when using MAP are to schedule a time when those machines must be connected to
the network and then run the scan at that time. Alternatively, you can keep rerunning the scan, hoping to catch some of them when they periodically connect.
Otherwise, MAP has no way of connecting to those machines.
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

Customer Service Complaint - Need Assistance ASAP and not getting it!

I sent in my Yoga Laptop for repairs two weeks ago. When I spoke with technical support, I was told that my laptop would be fixed within 7 business days, and returned to me. These 7 business days have since passed and I have yet to receive an update on my laptop, let alone my actual laptop. When I called to complain about this to 1-877-453-6686, I was told I would be getting a call back from customer service within 48 hours. These 48 hours have also passed and have not yet received a call. I called again today to find out what was happening and was told nothing more than "you will be contacted by them within 48 hours".
I was supposed to leave for Europe this past Sunday, and was told by the person I originally spoke to that I would have my laptop by then. Nope. Nothing. I am now leaving next Sunday and am very worried I will have to go purchase a new laptop, at my own cost, because Lenovo is unable to uphold to their customer service standards and provide me with any feedback. I am at the point of filing a complaint about the company to the Better Business Bureau here in Canada, but I feel the problem would best be resolved if Lenovo actually contacted me back. I have been without a laptop for 2 weeks now, and as a student, this is too long!!
Lenovo Customer Service, please contact me ASAP! I am not a happy customer right now and you guys have caused me way more stress than I need.
Thank you!
Andrea L.

We are listening and want to help you! I am sorry to hear of the issues you're experiencing with your door lock. We appreciate you trusting us to help keep your home secure. Our Customer Support Leadership would like to expedite the resolution of this matter. Please share a little more information by clicking here to send Digital Life a private message. In your message please include:
Your name
Account number
Address
Contact number
Thank you again for the gift of feedback. Not only do we look forward to resolving this matter, but we will also use this opportunity to further improve our overall customer experience.

LiveCycle won't load... need assistance ASAP please

I'm working on a form for a staffing company's tiem sheet. I've used LiveCycle in the past atr otehr jobs, but never launched my own copy through my Acrobat Professional until recently, and it doesn't work. I've tried repairing the install and even did a fresh install/re-registering the product, and it still won't launch.
I get the following error messages:
"Acrobat cannot start Adobe LiveCycle Designer. You may need to repair or reinstall the application using the original installation program."
or when launching LiveCycle directly from my programs:
"The application or DLL C:\\WINDOWS\\WinSxS\x86_MicrosoftVC80.IvFC_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_b77cec8e\ MFC80U.DLL is not a valid Windows image. Please check this against your installation diskette."
Like I said, I've repaired and reinstalled the program a number of times already with no luck. If anyone can help it would be greatly appreciated.
Thanks in advance.

Hi,
I got this error also, and found out that this props up when
You have SQLServer or SqlServer Express intalled on your local machine. Uninstall Sqlserver and Livecycle will load. At our company we use, SQLserver off the Server anyway, so my desktop only has SQLServer management Studio and thats fine for me
Please let me know if this helped.
Regards
Nanda

Deleting photos in iPhoto slideshow - need assistance asap!

I'm making a slideshow in iPhoto. I have tried to delete photos from the slideshow by first highlight the photo, then clicking on "Photo" in the menu and then clicking on "Delete from Album". I deleted several photos and it appeared as if they had been taken out of the slideshow. When I go back to view it the same photos that I thought I deleted again show up in the show. Huh? What am I doing wrong? I've got to finish this slideshow this weekend! Thanks in advance.

Click on the thumbnail of the photo in the tray at the top of the slideshow window and use the Delete key. Deleting them from the album they were imported from will not delete them from the slideshow.
OT

My ipod says i have no music on it, but when i plug it into itunes, and look under music on my ipod, its all there. NEED HELP ASAP!!!!! all the music came from a computer which i no longer have, so my ipod is the only place where that music is.

This morning, i downloaded about 16 songs to put on my ipod, and i manually dragged them over to my ipod to sync that way (like i always do because the music on my ipod came from a different computer which I no longer have) and on my way to work, i realized my ipod says "no content" under Music. However, when I plug my ipod into itunes and click on the music tab under my ipod name, all of my music is there. What happened and how do i get that music back on my ipod? I need help asap.

You had a glitch and the music files got corrupted. I know of no way to uncorrupt them.
You can try using a computer app like iFunbox
http://dl.i-funbox.com/
to see if yo can get them from the iPod in a usable file.
Otherwise you will have to re import them to your computer and sync
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Objects outside of workspace show in SWF... Need help ASAP!

When I export a flash movie (.swf file)And play it on full screen, the objects that are outside of the workspace show. Can anyone tell me how to fish this problem? need help ASAP! Thanks :]

If what follows isn't sufficient for you to figure out, you'll have to spend some time learning how to work with Flash. While you'll often get help solving problems in these forums, it's less likely you will get tutoring services. Google is a very good resource for tutorials.
To create a mask you draw a shape to the size you want and place it on a layer above all the content you want to mask. A mask is actually not well named because masks normally hide things, while in the graphics world, masks define the are where things are shown... so when you apply a mask to something, only what is under the mask shows. To finalize, you right click on the label area of the mask's layer and select Mask from the menu that appears. You may have to drag lower layers up towards the mask layer to get them included, whicxh is why I mentioned creating the rest of the content as a movieclip (a single layer object).
To control the visibility of objects you set their visibility to true or false (AS2: mcName._visible = true (or false), AS3:mcName.visible = true (or false)).
To create a frame around the stage, add a new layer atop everything and draw a rectangle big enough to hide all the content you don't want showing that is off the stage. Then draw a rectangle that is the same size as the stage on top of that first rectangle, placing it over the stage, and then deselect anything that is selected. Then reselect the smaller rectangle you just drew and delete it. The larger rectangle is now framing your stage.

Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!

Hi experts!
Got an error when extracting data with extractor 2lis_04_matnr.
System says (short dump):
DUMP TEXT START----
Runtime error:    CONNE_IMPORT_WRONG_COMP_TYPE
Exception:   CX_SY_IMPORT_MISMATCH_ERROR
Error when attempting to import object "MC04P_0MAT_TAB".
The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure "MCEX_BW_LO_API" "(FUNCTION)".
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is: When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". <b>The data type is "D" in the dataset, but "C" in the program.</b>
DUMP TEXT END----
Please, can someone explain me how to solve it?
Really need help ASAP!
Thanks in advance,
Jaume
Message was edited by:
        Jaume Saumell
Message was edited by:
        Jaume Saumell

Hi,
Check this note: 328181
So you need to delete entries in SM13/LBWQ for application and also detup table content.
And then refill teh set up table.
If you are in production clear the entries by running collective run no of times for this application 04.
With rgds,
Anil Kumar Sharma .P

Need assistance with Windows 2008 R2 server BSOD - ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)

Need assistance with Windows 2008 R2 server BSOD - ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
I have a Windows 2008 R2 server which is experiencing random BSOD during the night. This is occurring maybe once or twice a week. I have gathered two Memory crash files. This server is running Citrix XenApp 6.5 but nothing else is reporting an issue except
for the memory dump. I’m looking for assistance in reading crash file and finding the cause.
I’ve spent over a week going through articles trying to learn and trouble shoot the BSOD but no closer to understanding the WinDbg 6.3.9600 report.
This is a production server and I have verified that Windows Updates has updated the server with latest releases. I’m hoping that the crash file will show something before I have to run the Driver Verifier.
The crash zip file is located -
https://onedrive.live.com/redir?resid=9644A4E0A26873B1!2359&authkey=!AMS4Svuk-SS3-JA&ithint=file%2czip
*                        Bugcheck Analysis
ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
An attempt was made to execute non-executable memory. The guilty driver
is on the stack trace (and is typically the current instruction pointer).
When possible, the guilty driver's name (Unicode string) is printed on
the bugcheck screen and saved in KiBugCheckDriver.
Arguments:
Arg1: fffff880009eff38, Virtual address for the attempted execute.
Arg2: 8000000002cfe963, PTE contents.
Arg3: fffff8800da2eea0, (reserved)
Arg4: 0000000000000002, (reserved)
Debugging Details:
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0xFC
PROCESS_NAME: powershell.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
TRAP_FRAME: fffff8800da2eea0 -- (.trap 0xfffff8800da2eea0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa80070f3648 rbx=0000000000000000 rcx=fffffa80070f3648
rdx=fffff8800da2fbf8 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80001680b80 rsp=fffff8800da2f030 rbp=fffff8800da2fbd0
r8=fffff8a01804c680 r9=fffff8800da2fc68 r10=fffffffffffffffd
r11=fffff8800da2fa90 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up di pl nz na pe nc
nt!KiPageFault:
fffff800`01680b80 55              push    rbp
Resetting default scope
STACK_COMMAND: kb
FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+44dfc
fffff800`017008b8 cc              int     3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::FNODOBFM::`string'+44dfc
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 531590fb
IMAGE_VERSION: 6.1.7601.18409
FAILURE_BUCKET_ID: X64_0xFC_nt!_??_::FNODOBFM::_string_+44dfc
BUCKET_ID: X64_0xFC_nt!_??_::FNODOBFM::_string_+44dfc
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0xfc_nt!_??_::fnodobfm::_string_+44dfc
FAILURE_ID_HASH: {aa632d36-b0f7-67cf-89e2-1cec389c0a11}
Followup: MachineOwner

Hi Kaysel_GTG,
Just addition. Regarding to Bug Check 0xFC, please refer to following article and check if can help you.
Bug Check 0xFC: ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
By the way, since it is not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer
Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
if any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

I'm restoring my iPhone right now, need help ASAP

So I've had a corrupt file that's been taking up 7GB in my 'other' stuff on my iPhone 5 so I'm finally restoring it right now, but I'm guessing the backup data with have saved whatever that corrupt file is in it.
So 3 questions: • If I don't want to backup now but for some reason decide I want to in a say a day or so what would I do?
• Can I restore my phone from my iCloud backup, if so how?
• After restoring my iPhone will it create new backup data that will wipe over the already existing data with the corrupt file in it or what?
Thanks for any help/advice, I'm in the middle of doing this so need help asap if anyone can help.

1. make a backup any time you want.
2. Yes, if you have a iCloud backup
Settings > General > Reset > Erase All Content and Settings
3.Yes on computer it will replace the old backup. (I suggest you manually delete the backup first)
iTunes > Preferences... > Devices > select backup and click the Delete button.

Ok i need help asap

Ok i used the website for the back up assistant to retrive my pin when i entered my pin on my device it said i entered wrong pin then tried uninstalling app then installing again still reciving wrong pin message how do i fix this problem???? please help asap thanks

Hello Randy Phelps,
I just want to touch base to see if the backup assistant has been resolved. The community has provided some excellent troubleshooting steps to help with the pin error. As mentioned earlier, I recommend that you verify that your contacts are saved online at My Verizon. Another option is that you can save your contacts in a .csv file onto your computer and setup a new backup assistant account, as SuzyQ mentioned. Once the new account has been setup then you can import the .csv file to backup assistant online. This will automatically transfer your contacts wirelessly to your device. If you need assistance with this process then feel free to reply to this message.
Thank you...
ArnettH_VZW
Follow us on Twitter @vzwsupport

IPad deactivated. Need help asap!!!

My daughter deactivated my husband's iPad. The screen says that it's deactivated and that I need to connect it to iTunes. The problem is, that it's connected and a little box appears saying "To allow access, please respond on your iPad...". How am I going to respond if its not working?! Need help asap!!!!

Is that the computer that it's normally synced to ? With iOS 7 you need to need 'trust' computer that it's connected to, if the iPad is disabled you won't be able to trust it, you will need to put the iPad into recovery mode in order to be able to reset the iPad - there are instructions towards the bottom of this page : http://support.apple.com/kb/HT1212 . You can then restore/resync the content to it.

Need assistance installing MindStorm NXT module on my desktop with Win XP and also my laptop which runs Win 7, software does not want to install?

I need assistance to install LabView MindStorm NXT module in a Desktop system with Win XP and a Laptop with Win7. Both are 32 bit with all service packs applied. I purchased the academic version from a company called On-The-Hub.
Attempted to install but seems to reject my serial number?

Hi Rob,
Thats really strange because the NXT Module 2010 and the NXT Module 2011 are free and don't require serial numbers. Where did you obtain the installer? The core LabVIEW installer requires a serial number but if you already have that installed, the NXT Module is just a free addon. Here are the links to the module for LabVIEW 2010 & 2011
NXT Module 2011 : http://joule.ni.com/nidu/cds/view/p/id/2637/lang/en
NXT Module 2010: http://joule.ni.com/nidu/cds/view/p/id/2551/lang/en

Hi...lags animations in games and messages and album pic..when disable assistive touch,it's true and fix..please release update to fix this in ios 7.1..i need assistive touch and fast game and animation booth!!

Hi...lags animations in games and messages and album pic..when disable assistive touch,it's true and fix..please release update to fix this in ios 7.1..i need assistive touch and fast game and animation booth!!

No Apple here, user to user forum.
I will not be releasing any version of iOS ever.

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

Which version of OSX and what email provider are you using.

Content wronfully rejected by moderator - need assistance ASAP

Similar Messages

Maybe you are looking for