Contention for Transaction Enqueue
Hi,
What can cause contention for Transaction Enqueue?
Warm regards,
Hi
Run Statspack report and it will give you a detail information. It may be the concenteration of mostly used tables on one drive, etc ........the best way is to run the statspack reports.........
Similar Messages
-
Business Content for Bill Up transaction in CRM system
To all Experts,
I'm currently working on a project that requires Bill Up transactional data ( Source Table: CMSD_BU ) to flow from CRM to BW system. I'm looking for Business Content that can fulfill this requirement. However, till to date, I couldn't find any information of such Business Content. I'm not sure if such BC exist. Can anyone help if you have experience implement this data flow?
When searching for the DataSource / Extractor, I found BW Extract Structure CMST_BU_BW and CMST_BU_BW_C in the CRM system. But couldn't find any DataSource for both extract structure. Not sure if we need to install any support pack in order make the BC available in the system. Please help if you have any idea.
Thanks in advance.
Regards,
Hui PinHi Shalini,
The document is replicated from ECC to CRM without any errors.
For this document I just want to create follow up transaction in CRM.(I dont want to change the document in CRM)
The follow up transaction is in display mode. this is my problem.
Hi Rekha:
I have done following setting in CRM to create follow up transaction in CRM for the document which is replicated from ECC to CRM.
1) Defined the Copying Control for Transaction type
2) Defined Copying Control for Item categories
3) Defined Item category determination when copying
Thanks in advance,
Regards,
-Rahul. -
Business System not reflecting the XI Content for SRM
Hi,
We are currently working on the SUS-MM scenario.
The landscape includes PI 7.11, SRM 7.0 and R/3 4.6C. SLD Communication is working fine between these systems.
Integration Builder has SRM Server 7.0 and SRM Server IC 7.0 imported.
The current status:
We can successfully transfer vendors from SAP R/3 to SUS
We cannot transfer transaction data from SAP R/3 to SUS, e.g. purchase orders etc
Our Main Issue:
The Business System INTEGRATION_SERVER_<SID> is imported into the Integration Builder from the SLD.
On the Display communication component screen, the receiver and Sender tabs are not showing any of the SRM Server or IC components that have been imported into the ESR. However is displaying only the BASIS components that was imported during inital install.
Because of this, we are not able to proceed with the configuration though the interfaces being available in the ESR. We are not sure what is that we are missing that is preventing the XI content for SRM from being displayed. Also, the PI business system in the SLD has the SRM Content listed under the installed products list.
Any help would be appreciated.
Thanks
Venkat.Hello,
do you have a solution? I'm facing the same issue.
Regards,
Sven -
AIP-50143: Transaction Instance Not found for Transaction Id
Hey Guys,
We have configured a Custom Document Exchange over Generic protocol to transfer a file.
1. Internal delivery channel is 'SFTP' - Picks file
2. External delivery channel is 'SFTP' - Puts file
3. Exchange protocol - Custom document over generic
4. Translation enabled - False (Currently its turned off, but the file is xml so we may want to turn it on)
5. Validation enabled - False
We are encountering below error in B2B while processing. Can someone please help with this.
Thanks,
Phani
010.02.05 at 18:41:41:672: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setDocumentPlugin PickReqRev 1.0
2010.02.05 at 18:41:41:672: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setDocumentPlugin info : Cremul version D96A
2010.02.05 at 18:41:41:672: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setDocumentPlugin info : EDIPHARM version 1.0
2010.02.05 at 18:41:41:672: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setDocumentPlugin info : PickReqRev version 1.0
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setExchangePlugin Generic version 1.0
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setExchangePlugin info : Genericversion 1.0
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage translated payload =
oracle.tip.adapter.b2b.message.MessageStorage@140fee
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage msg.isSignalMsg() = false
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage Call Outgoing Response Processor
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Response:Response:outgoingResponse Enter
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Response:Response:outgoingResponse Update the Request-Response Table Row for RefertoRequestMessageID with message state Processing Outgoing Response
2010.02.05 at 18:41:41:676: Thread-26: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2010.02.05 at 18:41:41:677: Thread-26: BusinessLogicLayer - (DEBUG) Push Stack: queryBusinessTransactionInstance
2010.02.05 at 18:41:41:693: Thread-26: BusinessLogicLayer - (DEBUG) Pop Stack: queryBusinessTransactionInstance
2010.02.05 at 18:41:41:694: Thread-26: B2B - (ERROR) Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.collaboration.B2BWFEventManager.handleException(B2BWFEventManager.java:478)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.getTransactionInstance(CollabCatalogAccessor.java:364)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.setTransactionState(CollabCatalogAccessor.java:283)
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:871)
at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3249)
at oracle.tip.adapter.b2b.msgproc.Response.outgoingResponse(Response.java:905)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1170)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
at oracle.tip.transport.basic.sftp.SFTPProcessor.processMessage(SFTPProcessor.java:188)
at oracle.tip.transport.basic.sftp.SFTPMonitor.processMessage(SFTPMonitor.java:351)
at oracle.tip.transport.basic.sftp.SFTPMonitor.run(SFTPMonitor.java:304)
2010.02.05 at 18:41:42:001: Thread-26: B2B - (DEBUG) Engine:notifyApp Enter
2010.02.05 at 18:41:42:014: Thread-26: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0A140A0E126A1276F45000001AD6B570</b2bMessageId>
<errorCode>AIP-50014</errorCode>
<errorText>General Error</errorText>
<errorDescription>
<![CDATA[Machine Info: (fcgemappdev04)
Description: General Error
StackTrace:
Error -: AIP-50014: General Error: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1213)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
at oracle.tip.transport.basic.sftp.SFTPProcessor.processMessage(SFTPProcessor.java:188)
at oracle.tip.transport.basic.sftp.SFTPMonitor.processMessage(SFTPMonitor.java:351)
at oracle.tip.transport.basic.sftp.SFTPMonitor.run(SFTPMonitor.java:304)
Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3252)
at oracle.tip.adapter.b2b.msgproc.Response.outgoingResponse(Response.java:905)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1170)
... 4 more
Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:874)
at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3249)
... 6 more
Caused by: Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.collaboration.B2BWFEventManager.handleException(B2BWFEventManager.java:478)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.getTransactionInstance(CollabCatalogAccessor.java:364)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.setTransactionState(CollabCatalogAccessor.java:283)
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:871)
... 7 more
]]>Hi Phani,
What is the naming convention you are using at IDC? If you are sending the response to your TP, then make sure to send ReplyToMsgId as part of file name. If it is not a response, then send MessageType as 1 as part of file name.
For file naming convention required, please refer -
http://www.oracle.com/technology/products/integration/b2b/pdf/B2B_TN_010_Transport_File_FTP_Internal.pdf
Regards,
Anuj -
XI content for SRM and CCM scenario - mapping
Hi All,
We are using the standard business content for integrating SRM with CCM to update contract information from SRM to CCM. Both SRM and CCM are on the same system.
The configuration scenario used is MasterDataInclusionInCatalogOnWAS700 which is in the name space SAP CATALOG CONT.MGMT. 2.0_700 , http://sap.com/xi/CCM/CAT.
There are 2 interfaces being referred by this scenario: CatalogUpdateNotification_Out and this CatalogUpdateNotification_In and both the interfaces are pointing to the same meesage type CatalogTransmission but they are in different name spaces.
Once the scenario was configured there was no interface mapping available in the standard business content to map the above 2 interfaces.
SAP SRM SERVER 5.5
CatalogUpdateNotification_Out
CatalogTransmission
http://sap.com/xi/EBP
SAP CATALOG CONT.MGMT. 2.0_700 ,
CatalogUpdateNotification_In
CatalogTransmission
http://sap.com/xi/CCM/CAT
Is this the normal case and we need to develop our own mapping or is the standard content not imported correctly?
The service pack details are as follows:
PI 7.0 SP level 14
XI content
u2022 SAP BASIS 7.00 - SP 14
u2022 SAP CATALOG CONT.MGMT. 2.0_700 - SP 12
u2022 SAP SRM SERVER 5.5 - SP 11
u2022 SAP ABA 7.00 - SP 14
Thanks,
Shravanditto, anybody received a response from SAP with regards to this problem?
As suggested above, we could build our own mapping in XI but this would obviously be a modification to SAP standard which we would prefer to avoid.
Regards, Kyle.
OK Received a response from SAP dated Oct. 9, 2008
I assume that you have installed NW 7.00 SP14 (or higher).
Within earlier versions the mapping from XML to ABAP was to lax.
The XML message was processed witout regarding the name of the root
element. This was fixed with SP14.
When you call an interface the XML message must match with the type
defined in the WSDL used for proxy generation.
Either the message or the WSDL used to generate the proxy seems to be
wrong here.
Here is a work around should solve this problem until we make available in a standard note soon.
I will do it internally to our development team but I am sorry that i can not tell now when the note will be ready.
Disable the new check by adding the following entry in transaction sproxset
-Name: ST_USE_LAX_ON
-Value: X
-User: <empty>
-Inactive: <empty>
Edited by: Kyle Freeman on Oct 9, 2008 5:54 PM -
Need info on BI content for "Hedge Management"
Hii Guys,
Can anybody help me in finding right BI contents for Hedge Management (Transaction banking)?
I can see some hedge related chars and key figures in 0CFM_DELTA_POSITIONS but no records are coming for those fields.
Am i looking at the right data source ?
Regards,
Ashu.
Edited by: Ashu Gupta on Mar 9, 2010 11:27 AMHi Martin,
I have already checked that but I am unable to get the desired information.
Thanks for your help.
Regards,
Ashu. -
Problem in installation of Business Content for Solution Manager
Hi all,
I have a problem while trying to install the Business Content for Solution Manager. In detail, I cannot install/ see the Process chains. I am not much familiar with Business content installation, so maybe I missed and /or some step.
Following the instructions from SAP IMG (SPRO/ SAP IMG / Solution Manager / Configuration / Scenario-specific settings / Solution monitoring / BI Reporting / BI Client) , I activated the Datasource 0SM_SMG_ROOT , performed all the steps and installed all the relevant Business Objects (Infoobjects, Datasources, Infocubes, Infopackages, etc.). All the objects seen from transaction RSA1 seem correctly installed and activated.
The last step is the installation/activation of the Process chains. This step is executed, but the installation job terminates with messages like Infopackage 0SM_XXXX does not exist in D version; activation not possible. It seems like Process chains are looking for some Infopackage, and these are not present. They are not present indeed, and I dont know why. The result is that no Process chain is visible from transaction RSPC.
Am I missing some step, or doing a wrong/ incomplete procedure ?
Thanks a lotHI Saravanan,
For Solman Service Desk, the following objects are used :
Cube : 0CSRV_C01
DSO : 0CRM_PROH
DataSource : 0CRM_SRV_PROCESS_H
And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
Regards
Mahesh Kumar -
PI / XI content for SAP APPL 6.04?
Hi guys,
I would like to use the Business Partner functionality (create, read etc) in SAP PI 7.1. We currently only have PI content for SAP APPL 6.03.....but the SYNCHRONOUS interfaces I really want are in SAP APPL 6.04.
Here are the interfaces I need to use...
http://esoadocu.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE04284687BEBDF19515001A64D3F462&id=26423549723411DA36BB000F20DAC9EF
There is only an ABAP / SAR file download from the service marketplace for 6.04.........for 6.03 there is both the ABAP and XI related content download.
Does anyone have any idea when the SAP XI / PI will get content for SAP APPL 6.04?
I know the interfaces are synchronous and that they will be available on the SAP Backend system if I load the SAP APPL 6.04 there. And then they would be available through transaction SOAMANAGER etc......but we are wanting to use XI as the central repository for our interfaces, and then generate ABAP proxies in the SAP backend.
Any help in this regard would be greatly appreciated
Regards
LyntonHi Lynton
See the note #1152640 SAP NetWeaver 7.1: Importing ESR content. This contains the links to the location of all PI Content. I believe SAP APPL 6.04 is now available.
Regards
Mark -
Hello,
I would like to understand Concept of BI content for SRM.
For some reason we cannot use BI.
【structure of the system】
BI7.0
SRM5.0(Decoupled Scenario)
ECC6.0
■transaction data(Decoupled Scenario)
How does BI eliminate crossover of documents and gather documents?
by document number?product category?
■master data(Decoupled Scenario)
WHen we use master data for analysis, should I use master date of SRM?
In that case, should we copy the master data of ECC to SRM?
【Decoupled Scenario】
Master date and transaction date (by unit of record) exist in
1. ECC
2. SRM
3. ECC and SRMNO migration of data from old to new model data.
I implemented the new model and reload the data into BW. -
CRM Content for Solution Manager
Does anyone have an idea where i can find the CRM 7.0 Content for Solution Manager?
I tried looking under: Downloads - SAP Software Distribution Center as well as Release and Upgrade Info with no luck.
Please help.
Kind Regards
Felix>
felix chabeli wrote:
> Does anyone have an idea where i can find the CRM 7.0 Content for Solution Manager?
>
> I tried looking under: Downloads - SAP Software Distribution Center as well as Release and Upgrade Info with no luck.
Do you want to implement CRM 7.0 with the help (project, Business Blueprint, Configuration) of a SAP Solution Manager system?
If yes, you can browse through the [Available implementation content|https://implementationcontent.sap.com/bpr]
The content is shipped via add-on ST-PI and its support packages.
Relevant transactions: SOLAR_PROJECT_ADMIN, SOLAR01, SOLAR02
Regards,
Ruediger -
Work Protect Mode for transactional iView...
Hi Experts,
Please help me to understand significance and features of Work Protect mode in portal.
How to implement it.
But main point is, is it possible to implement Work Protect Mode in Transactional iViews, i.e. let say we have created one transactional iView for SU01 tcode, which opens in New Window.
Now if I directly close that window then ideally one popup should come telling the data is not saved.
Also let me know if there is any other way to achieve my requirement.
Appreciate for help.
Regards,
RaviHi Ravi,
Thanks for your response.
Kindly suggest what vaue we should give in this property "workprotect.mode.default".
I was going through one link : [http://help.sap.com/saphelp_erp2004/helpdata/en/37/50fb5066f9db43b3b5d5fc8de0c051/content.htm]
Also are you sure this setting will enable WorkProtectMode for Transactional iView as well.
Regards,
Ravi -
User exit / badi for transaction appcreate
Hi,
Can nyone help me in getting user exit / badi for transaction appcreate .
Cheers
kamleshHi Kamlesh,
Try below code to know the userexits for the given trxn code.
Regards,
Raj
*& Report ZTESTRAJ_USEREXITS
REPORT ztestraj_userexits
NO STANDARD PAGE HEADING
LINE-SIZE 200
MESSAGE-ID zz.
T A B L E D E C L A R A T I O N S *
TABLES: tftit,
e071,
e070.
S T R U C T U R E D E C L A R A T I O N S *
TYPES: BEGIN OF x_tstc,
tcode TYPE tcode,
pgmna TYPE program_id,
END OF x_tstc.
TYPES: BEGIN OF x_tadir,
obj_name TYPE sobj_name,
devclass TYPE devclass,
END OF x_tadir.
TYPES: BEGIN OF x_slog,
obj_name TYPE sobj_name,
END OF x_slog.
TYPES: BEGIN OF x_final,
name TYPE smodname,
member TYPE modmember,
include(15), "Include name
END OF x_final.
I N T E R N A L T A B L E D E C L A R A T I O N S *
DATA: it_tstc TYPE STANDARD TABLE OF x_tstc WITH HEADER LINE.
DATA: it_tadir TYPE STANDARD TABLE OF x_tadir WITH HEADER LINE.
DATA: it_jtab TYPE STANDARD TABLE OF x_slog WITH HEADER LINE.
DATA: it_final TYPE STANDARD TABLE OF x_final WITH HEADER LINE.
V A R I A B L E S D E C L A R A T I O N S *
U S E R I N P U T S S C R E E N *
S E L E C T I O N S C R E E N *
SELECTION-SCREEN: BEGIN OF BLOCK blk01 WITH FRAME TITLE text-t01.
PARAMETERS: p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk01.
S t a r t o f S e l e c t i o n *
START-OF-SELECTION.
PERFORM get_tcodes. "Get Tcodes
PERFORM get_objects. "Get Objects
E n d o f S e l e c t i o n *
END-OF-SELECTION.
PERFORM display_results. "Display Results
*& Form get_tcodes
Get Tcodes
FORM get_tcodes.
SELECT tcode
pgmna
INTO TABLE it_tstc
FROM tstc
WHERE tcode = p_tcode.
IF sy-subrc = 0.
SORT it_tstc BY tcode.
ENDIF.
ENDFORM. " get_tcodes
*& Form get_objects
Get Objects
FORM get_objects.
DATA: l_fname LIKE rs38l-name,
l_group LIKE rs38l-area,
l_include LIKE rs38l-include,
l_namespace LIKE rs38l-namespace,
l_str_area LIKE rs38l-str_area.
DATA: v_include LIKE rodiobj-iobjnm.
DATA: e_t_include TYPE STANDARD TABLE OF abapsource WITH HEADER LINE.
DATA: l_line TYPE string,
l_tabix LIKE sy-tabix.
IF NOT it_tstc[] IS INITIAL.
SELECT obj_name
devclass
INTO TABLE it_tadir
FROM tadir FOR ALL ENTRIES IN it_tstc
WHERE pgmid = 'R3TR' AND
object = 'PROG' AND
obj_name = it_tstc-pgmna.
IF sy-subrc = 0.
SORT it_tadir BY obj_name devclass.
SELECT obj_name
INTO TABLE it_jtab
FROM tadir FOR ALL ENTRIES IN it_tadir
WHERE pgmid = 'R3TR' AND
object = 'SMOD' AND
devclass = it_tadir-devclass.
IF sy-subrc = 0.
SORT it_jtab BY obj_name.
ENDIF.
ENDIF.
ENDIF.
*- Get UserExit names
LOOP AT it_jtab.
SELECT name
member
INTO (it_final-name, it_final-member)
FROM modsap
WHERE name = it_jtab-obj_name AND
typ = 'E'.
APPEND it_final.
CLEAR it_final.
ENDSELECT.
ENDLOOP.
*- Process it_final contents.
LOOP AT it_final.
l_tabix = sy-tabix.
CLEAR: l_fname,
l_group,
l_include,
l_namespace,
l_str_area.
l_fname = it_final-member.
CALL FUNCTION 'FUNCTION_EXISTS'
EXPORTING
funcname = l_fname
IMPORTING
group = l_group
include = l_include
namespace = l_namespace
str_area = l_str_area
EXCEPTIONS
function_not_exist = 1
OTHERS = 2.
IF sy-subrc = 0.
IF NOT l_include IS INITIAL.
*- Get Source code of include.
CLEAR: v_include, e_t_include, e_t_include[].
v_include = l_include.
CALL FUNCTION 'MU_INCLUDE_GET'
EXPORTING
i_include = v_include
TABLES
e_t_include = e_t_include.
IF sy-subrc = 0.
LOOP AT e_t_include.
IF e_t_include-line CS 'INCLUDE'.
CLEAR l_line.
l_line = e_t_include-line.
CONDENSE l_line NO-GAPS.
TRANSLATE l_line USING '. '.
l_line = l_line+7(9).
it_final-include = l_line.
MODIFY it_final INDEX l_tabix TRANSPORTING include.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " get_objects
*& Form display_results
Display Results
FORM display_results.
FORMAT COLOR COL_HEADING.
WRITE:/1(150) sy-uline.
WRITE:/ sy-vline,
2(23) 'Extension Name',
24 sy-vline,
25(39) 'Exit Name',
64 sy-vline,
65(74) 'Description',
140 sy-vline,
141(9) 'Include',
150 sy-vline.
WRITE:/1(150) sy-uline.
FORMAT RESET.
SORT it_final BY name member.
LOOP AT it_final.
CLEAR tftit.
SELECT SINGLE stext
INTO tftit-stext
FROM tftit
WHERE spras = 'EN' AND
funcname = it_final-member.
WRITE:/ sy-vline,
it_final-name COLOR COL_KEY, 24 sy-vline,
25 it_final-member, 64 sy-vline,
65 tftit-stext, 140 sy-vline,
141 it_final-include, 150 sy-vline.
WRITE:/1(150) sy-uline.
ENDLOOP.
ENDFORM. " display_results -
Find the std Business content for these objects in CRM..
Hi,
Can you please help me in finding
To identify the standerd BW extractors in the Business Content.
From the CRM
Business Content for the following objects
Product ( New products in CRM and not in R/3)
Sales Orders à
à Line items.
Quotations CRM only
Billing Documents CRM
Credit Notes
Customers - àNot fully registered " prospects will be in CRM only.
Customers will be transported to R/3
IBASE àMaster Data Item
àContent?
Activities CRM
Please help me how can I find the std Business content for these objects in CRM..CRM Business content objects:
0CRM_LEAD_H - Lead Header (Transactional Data)
0CRM_LEAD_I - Lead Item (Transactional Data)
0CRM_MIG - Mail GUID
Characteristics
InfoObject Description
0CRM_LEAGUI Lead GUID
0STAONESYS0 CRM status life cycle (One Order)
0STAONESYS4 CRM status opportunity/lead (One Order)
0CRM_RCA Catalog
0CRM_RG Code group
0CRM_RCO Code
0CRM_PROSPE Prospect
0BP_CONTPER CRM contact partner
0BP_RESPPER CRM owner
0CRM_SALESP CRM sales partner
0CRM_OBJTYP Business transaction object type
0CRM_ITOBTP CRM item transaction type (object type)
0CRM_MKTELM CRM marketing element
0CRMPLEAGUI CRM preceding lead GUID
0CRM_LEADCR Creation date of the lead
0CRM_OPPGUI GUID of a preceding opportunity
0CRM_OPPCRD Creation date of the opportunity
0CRM_PREOTP Object type of the preceding document
0DIVISION Division
0DISTR_CHAN Distribution channel
0CRM_SRVORG CRM service organization
0CRM_SALOFF Sales office
0CRM_SALORG Sales organization
0CRM_SALGRP Sales group
0CRMSA_OG_R Responsible organizational unit (sales)
0CRMSE_OG_R Responsible organizational unit (service)
0CRM_PRHIER Product category ID
0CRM_PROD CRM product
0CRM_ORDPRD Product name entered
0MATERIAL Material (allocation to R/3)
Time Characteristics
InfoObject Description
0CALDAY Calendar day
0CALMONTH Calendar year/month
0CALQUARTER Calendar year/quarter
0CALYEAR Calendar year
0FISCPER Fiscal year/period
0FISCYEAR Fiscal year
0FISCVARNT Fiscal year variant
Key Figures
InfoObject Description
0CRM_NUMDOC Number of order headers
0CRM_NUMOFI Number of order items
0CRM_LDOQV CRM: Expected order quantity in VME
0CRM_LDOQB CRM: Expected order quantity in BME
0CRM_DURLEA Duration of the lead
0CRM_EXDULD Expected duration of the lead
0CRM_NUMACT Number of activities per lead
0CRM_NUMCHL Number of changes in the qualification level per lead
0CRM_LEAWON Won leads
Units
InfoObject Description
0SALES_UNIT Sales unit
0BASE_UOM Base unit of measure
InfoCube 0CSAL_C01 - CRM Activities.
ODS Object 0SAL_DS01 (ODS for Activities)
Query (technical name) Query (description)
0CSAL_C01_Q0006 Success/Failure Analysis
0CSAL_C01_Q0016 Activity History
0CSAL_C01_Q0002 Intensity of Customer Care (Owner) 12M
InfoCube Opportunities - 0CRM_C04 (SAP BW Business Content)
InfoSources
CRM Opportunities: Header Data - 0CRM_OPPT_H
CRM Opportunities: Item Data - 0CRM_OPPT_I
Query (technical name) Query (description)
0CRM_C04_Q0100 Channel Management Sales Forecast
0CRM_C04_Q001 Win/Loss Analysis for Opportunities
0CRM_C04_Q002 Sales Volume Forecast
0CRM_C04_Q003 Pipeline Analysis per Phase
Hope it will helps you a lot.......... -
Hi,
I'm trying to create a job for transaction PBA6 (program RPAPRT02) but once I get the list of all the activities I should complete I don't know how to select them all and execute de program SAPMSSY0.
Any idea?
ThanksHi,
Did you try to make a Parallel Processing referred to RFC?
Maybe this link can help you.
[http://help.sap.com/saphelp_nw04/helpdata/en/22/0425c6488911d189490000e829fbbd/content.htm] -
How do we split our iCloud accounts but keep one iTunes account so we can share purchased content for our multiple iPhones and iPads?
You can migrate a copy of the data to a new account, then delete the other person's data from each account. To do this, on the phone that will be changing accounts, if you have any photos in photo stream that you want to keep on the phone, save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll. If you have any synced notes that you want to keep on the phone, email these to yourself so you can create new notes in the new account.
Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The phone that will be keeping the account will not be effected by this.) When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone. Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom). Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account. You will create a new icloud email address with you turn Mail to On.
Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (such as deleting your wife's data from your account, and vice versa).
Maybe you are looking for
-
Can I use HDMI to connect PC to TV?
I have an HP p7-1020 running Windows 7, 64 bit, and a Viore LED24VF60 TV. I can connect the TV using the analog VGA connections available on both the PC and TV. This works OK at a resolution of 1920x1080. I tried using the DVI connection on the PC, a
-
Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it van
-
Sound distortion in most recent episode of Lost
Hi all, the most recent episode of Lost plays on my Apple TV with really bad sound distortion starting from 4.23 and continuing to the end. I have a series pass so the episode downloaded onto my Apple TV. The file that has synched with my Mac plays f
-
Japanese Characters Encoding Problem
Hi All, I have been looking at the problems posted in this forum and quite a few describe the issue I am facing currently but none has been able to provide a solution. The problem I am facing is as follows: Step 1: I am retrieving Japanese data from
-
Imovie 11 not compatible with 10.5.8 - Whats the alternative?
Hi I don't have ilife installed on my mac. I wanted to buy ilife 11 but as far as I understand its not compatible with my OS. And I can't find ilife 09. Can someone please advise me on any alternative? Regards.