ContentPath not working in a loop for a Loader component

i'm trying to load pics into a loader in my movieclip, i'm
looping through about 20 items, to be placed in a movieclips
dynamically attached...
this does not work...
mcContainer['node'+nCount].pic.contentPath=myimagepath;
this does work...
mcContainer['node'+nCount].pic.loadMovie(myimagepath);
but it does not come in scaled / sized like I want...
any reason why the images do not appear in the loader
component in the movieclip? it's like the screen is not being
refreshed or the loader never finishes, when I trace the
contentPath after the fact it says the right path, but no image is
there.

contentPah is used to specify linkageID's only, and will not
work for a URL. you correctly used the load method to get the
picture in there, now you just have to scale it. if you set the
loader's scaleContent to true, your image will scale to the
loader's size, and vice versa if you set the property to false. if
you need to do some custom scaling based on the size of the image,
you can grab those properties like so:
myLoader.content._width
not that the above property, and any scaling commands, will
only work after the loader finishes loading, so you'll need to put
that stuff in an event handler for the loader.complete event...
hope that helps

Similar Messages

I am using iphone 4s and just updated ios6 but my apple map is not working please help me for the same

Dear all,
as i am using i phone 4s in INDIA, today itself i updated my phone to operating system ios6, but my map of phone is not working , so please help for same.Its says "direction could not be found ", when i select the starting point and end point, go to start.
With Regards
Anurag

Friend,
refer to following discussion on the same
Apple maps very disappointing

HT201406 my ipad touch screen is not working please give solution for it.

my ipad touch screen is not working please give solution for it.
i have connected ipad to itunes and done it restore seetings then also my touch is not working but
when i connected ipad to i tunes inside functions are working properly but touch screen is not working what can i do

If you have a screen protector on the iPad's screen, try removing it. If you don't or that doesn't help, and restoring the iPad to factory settings has not corrected the problem, then the iPad probably has a hardware problem and will need to be taken or sent to Apple for replacement.
Regards.

Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I updated to Yosemite, now my laptop keyboard does not work in MS Word for Mac. Help!

I updated to Yosemite, now my laptop keyboard does not work in MS Word for Mac. Help! Any suggestions for fixing this?

Did you ever get a solution to your problem? Because I am having the same problem. I was actually in the middle of using Word when the keyboard stopped working. But it works in other apps, including in Excel.
Thing is that my laptop just got back from Apple for repairs and they replaced everything but the display - including the hard drive.
So not only do I have plenty of hard drive space, but it should be virus and error free otherwise.
I have only installed a few programs and redownloaded some of my files from places like Dropbox, but otherwise is essentially a new system.
Oh - and it came with Yosemite, so I did not upgrade to Yosemite and still Word doesn't work.
I've always had trouble getting Word to play nice with my Mac but that was also with the old, full hard drive.
This is a fresh install. And since I lost all my files, I only had like 1 old file I have downloaded from email and accessed and was in the process of
creating a new file when it crashed. I got no error, the keyboard just stopped working (to type). I also cannot even get Word > Preferences to even open,
so it is completely unresponsive.
I did a Google search and under the Microsoft communities two suggestions to that person were that there may be multiple copies installed -
I have only the one - and that one is in the wrong place - again, I only have the one and it installed to the Hard drive (visible in Launchpad / Apps).
Another suggestion was that there was some problem with the updates. I ran updates and they installed fine. That helper suggested that the user
may have had different updates that worked for the other Office apps (Excel, PPT etc.) but not Word and that was at least part, if not all of his problem,
but all my Office apps show the same update version 12.3.6, so that cannot be the issue with me.
I've not yet tried uninstalling and reinstalling, but as I got no errors on the original install or updates, I'm not sure if that would fix it.
I've found that Mac just doesn't play nice with some programs at all.
And even though I have a factory installed version of Yosemite on a new, fresh hard drive, even when I booted up, my iPhoto app (which is empty) crashed. I am not sure if my iPhone or iPad was charging at the time, but I don't think so. iPhoto that I still have not even used has crashed several more times since, most notably when plugging in my iPhone / iPad to charge, namely when I declined to upload photos (by default) to DropBox. That may not be related at all, but thus far seems the only other problem I have encountered until this Word problem.
I'm on a MacBook Pro, Sept. 2009, running OS X Yosemite 10.10.1 factory installed from Apple repairs running Office: 2008 for Mac (Home and Student edition).
Please advise if you found a resolution and what it was.
Thanks

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

Kowhai wrote:
Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

The giant seach bar in the center of the home page does not work, what is this for? also under it is a bar with no title?

there is a search bar in the middle of the home page, I tried using it and it does not work. what is this for?

Battery does not appear to charge
Important: iPod touch cannot be charged with a FireWire-based power source.
Verify that the power source being used is working properly.
If connecting to a computer's USB port, verify it is a high-powered USB 2.0 port. Note: The USB ports on most keyboards don't provide enough power, so if you're connecting iPod touch to a keyboard, make sure it has a high-powered USB 2.0 port.
Verify the computer is turned on and not in sleep or standby mode. If iPod touch is connected to a computer that's not turned on or is in sleep or standby mode, the iPod touch battery may drain.
Try another USB port.
Try charging from a USB charger if available.
If that does not help, try another USB cable if available.
Learn more about charging the battery.
The Home button isn't working
Put the iPod Touch to sleep.
Wait a couple of seconds.
Press the Home button.
iPod Touch should wake up.
If iPod Touch does not wake up, then iPod Touch should be serviced.
Resources for Service
http://support.apple.com/kb/he57
https://selfsolve.apple.com

MySite – My Content Page is not working and giving error for existing customers

We are using SharePoint 2010 and recently moved to SharePoint 2013. Central Admin run under SP 2013 and Content Db Front End run under SP 2010.
After migration the MySite – My Content Page is not working and giving error for existing customers (http://mysite.ss.com/_layouts/MySite.aspx?Error=4705).
New users (after migration) are able access the My Content and adding documents but old users can’t.
Can anyone help me on the above?

I think you might be using non claims web app in 2010, if that is the case, you 'd need to convert your existing users to claims users for which you can refer to http://technet.microsoft.com/en-us/library/gg251985(v=office.15).aspx
to check if your exisiting users are claims or classic users , try
get-spuser -web http://mysite.ss.com -limit all
check in the output if you see the claims GUID in form of user names like i:0#.w|domain\username, if yes, they claims users if you just see Domain\username, you want those users to be converted to calims.
i'd need more details to be specific about my answer but aforementioned scenario is most common of all, hope this helps,
Thanks, Noddy

I have created an apple id but it will not work on my pc for icloud.How do I sign into icloud?

I have an apple id but that id will not work on my pc for icloud..How do I get an icloud id?

To enable iCloud on your Windows PC,
first set up iCloud on your other (Apple) devices,
then install the iCloud Control Panel for Windows...
From Here > http://www.apple.com/icloud/setup/pc.html

AddChild Not working in a loop with custom component

Hi,
I have a custom component 'form component'
<?xml version="1.0" encoding="utf-8"?>
<mx:Form xmlns:mx="http://www.adobe.com/2006/mxml" width="100%" height="100%">
    <mx:Script>
        <![CDATA[
            import mx.controls.Alert;
            import flash.net.navigateToURL;
            public var documentName:String;
            public var documentLocation:String;
            public var documentDescription:String;
            public var documentLevel:String;
            private function openLink():void
                var urlRequest:URLRequest=new URLRequest(documentLocation);
                navigateToURL(urlRequest,"_blank");
        ]]>
    </mx:Script>
    <mx:FormItem width="100%" height="100%" paddingRight="10" borderThickness="10">
        <mx:VBox width="100%" cornerRadius="10" borderThickness="2" borderStyle="solid" borderColor="#D5D2D2">
            <mx:ApplicationControlBar width="100%" fillAlphas="[1.0, 0.52]" fillColors="[#FFFFFF, #B3CDD9]">
                <mx:LinkButton id="eachDocumentName" label="Name" click="openLink()" textAlign="left" width="50%" />
                <mx:Label id="eachDocumentLevel" text="Level" textAlign="right" width="50%"/>
            </mx:ApplicationControlBar>
            <mx:Label id="eachDocumentDescription" width="100%" text="Description" paddingTop="5" paddingLeft="10"/>
            <mx:Label height="10" width="100%" />
        </mx:VBox>
    </mx:FormItem>
</mx:Form>
and I Want to add this component inside a VBox for a loop dynamically like
Script Code:
private function showDocuments(event:ResultEvent):void
                var documentList:ArrayCollection=event.result.root.documents.document;
                for(var i:int=0;i<documentList.length;i++)
                    var documentName:String=documentList[i].name.toString();
                    var documentDescription:String=documentList[i].description.toString();
                    var documentLevel:String=documentList[i].level.toString();
                    var documentLocation:String=documentList[i].location.toString();
                    createChildForFilePanel(documentName,documentLevel,documentDescription,documentLocation);
            private function createChildForFilePanel(documentName:String,documentLevel:String,documentDescription:Stri ng,documentLocation:String):void
                    Alert.show("function Called");
                    var documentListing:DocumentListing=new DocumentListing();
                    documentListing.percentWidth=100;
                    documentListing.percentHeight=100;
                    documentListing.eachDocumentName.label=documentName;
                    documentListing.eachDocumentLevel.text=documentLevel;
                    documentListing.eachDocumentDescription.text=documentDescription;
                    documentListing.documentLocation=documentLocation;
                    filePanel.addChild(documentListing);
MX: code
<mx:VBox id="filePanel" label="File Content" width="100%" height="100%" borderThickness="0" >
      </mx:VBox>
This is actually Not working.. Am I doing anything wrong. I have included the component in the namespace..
Thanks In Advance,
Piyush

Its working now. The Solution to it what I found was whatever you are Adding To the Parent Component. The Parent Component should be created in the action script.
Worked for me :-)
Thanks,
Piyush

Shift+F2 not working in SAP GUI for ITS

Hi,
In my transactional iview (SAP GUI for ITS) , in one of the screens, shift+F2 is not working(Which in turn opens graph for the report) The same is working fine in SAP GUI for html.
How can i make this work?
Also, can i have a document with the comparision of SAP GUI for html & SAP GUI for ITS, specifying its advantages and dis-advantages as well?..
Pls treat this query as urgent and respond ASAP.
Thanks in advance,
Kavitha

ITS THE PROBLEM IN DEV NOT IN PROD ECC SYS

Diagnostics not working in web role for Azure SDK 2.5.1

I am working with Azure SDK 2.5.1, mainly on the new designed diagnostics stuffs. However, I found I cannot get it run for my web role.
So, I created a cloud service project, added a web role. Then, I appended one Trace message at the end of Application_Start in Global.asax.cs:
Trace.TraceInformaction("Application_Start end.");
After that, I right clicked the WebRole and opened the Properties tab.
In the diagnostics config window:
General: I choose 'Custom
plan', also specified the storage account, keep the 'Disk
Quota in MB' as default '4096'
Application Logs: 'Log
level' switch to 'All',
others kept as default
Other tabs are in default config settings
After I deployed the project to cloud, I found some unexpected things:
There is no WADLogsTable exists
in Table storage. That's very strange, if I use a Worker Role, it would work as expected. So in web role, I just cannot find the Trace logging?
For the performance counters, since I am using the default config with 8 counters, I can only see 8 in WADPerformanceCountersTable table
storage. In my assumption, over time, there would be more and more values of this 8 counters transferred to this table. But it was just not happened, after several hours, it still had that 8 counter values.
I just thought the diagnostics for Web Role just crashed or not working at all. Meanwhile, I checked the logs located at "C:\Logs\Plugins\Microsoft.Azure.Diagnostics.PaaSDiagnostics\1.4.0.0\DiagnosticsPlugin.log" in
server, at the end of this file there is an exception said some diagnostics process exit:
DiagnosticsPlugin.exe Error: 0 : [4/25/2015 5:38:21 AM] System.ArgumentException: An item with the same key has already been added.
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
at Microsoft.Azure.Plugins.Diagnostics.dll.PluginConfigurationSettingsProvider.LoadWadXMLConfig(String fullConfig)
DiagnosticsPlugin.exe Error: 0 : [4/25/2015 5:38:21 AM] Failed to load configuration file
DiagnosticsPlugin.exe Information: 0 : [4/25/2015 5:38:21 AM] DiagnosticPlugin.exe exit with code -105
From MSDN,
the code -105 means:
The Diagnostics plugin cannot open the Diagnostics configuration file.
This is an internal error that should only happen if the Diagnostics plugin is manually invoked, incorrectly, on the VM.
It doesn't make sense, I did nothing to the VM.
As I said above, I just did very tiny changes to the scaffold code generated by Visual Studio 2013. Did I do something wrong or it's a bug for Azure SDK 2.5?
By the way, it seems everything is ok for Worker Role.

Hi,
This issue could be an internal issue, I do not have any update on this as of now. There was a similar issue due to a regression last month that has been resolved, however i dont think this issue is related.
Please follow the below article on how to enable Diagnostics and let us know if it works.
http://azure.microsoft.com/en-in/documentation/articles/cloud-services-dotnet-diagnostics/
I will let you know if I have any update on this issue from my side.
Regards,
Nithin Rathnakar.

LOVs not working in Webi Report for SAP BO 4.1 SP 2 Patch 3

Hello ,
I have developed reports and universes in SAP BO 4.0 SP 5 and i have migrated those reports to higher version of BO which is 4.1 SP2 Patch 3.
My universe is working fine with LOVs but when i run the webi report , the LOVs arent working.
have anyone facing the same issue. any idea why the LOVs arent working on higher version.?

Hi Victor,
The List of values we will assign in universe in order to get filtered data works on universe query panel
but the same objects when i am using in report(webi report) , the List of values are not working .i.e
they are not getting displayed in webi report.
for ex: i have country object having country names as LOVs and state objects having state names as LOVs . Now when i select Country value , the LOVs of state objects should get filtered and shows only states which belongs to country .
the above logic is not working in webi report , i am only able to select country and when i go for state, the state names do not get filtered.
please let me know why this is happening in the SP2 patch 3 version and its working fine for SP2 , but the chrome issue gets solved after applying patch 3 and not if we only upgrade to SP2.
the webi reports are not working in chrome browser if we using SAP B04.1 SP2 and lower version
but the LOVs are not working in SAP BO 4.1 SP 2 patch 1, 2,3.
kindly help me with the issue

Host admin page does not work after insatlling YAST for suse9

I am using 10205 grid and when I try to go to admin tab in grid it say YAST patch needs to be installed which I did but still it does not work.
Anyone having same issue and how to resolve this. I also followed the metaling note for this issue which was a workaround for a bug but still it did not work.
Any ideas?
Thanks in advance.

I clicked on the link that was provided on the GC host admin page and downloaded the patch and as root applied it to the server without any errors. The following are the steps:
When I go the host page then administration tab it says the following:
Install the SUSE patch for YAST from http://oss.oracle.com/projects/yast
Downloaded the patch yast-EM-1.7.0-0.1.noarch.rpm
I've installed the patch and restarted the agent and the permissions on all the files are set to 755 according to note
414438.1
after applying the YAST patch I clicked finish and nothing happens. I've restarted ther OMS as well but no effect. I was wondering if anyone else having the issue?

Lead Selection does not work after setting filter for ALV.

Hi, Can you please suggest on below scenario :
I have a Node with a sub node in it .
I am using the supply function on Sub Node to retrieve the date based on Parent Node.
There are two ALV's to display parent and item data. The issue is when a filter(user defined filter) is done on Parent table, the supply function does not work. The value is that of the selected row before setting the filter. Even after removing the filter, the item data is stuck and does not change on Lead Selection.
One thing I noticed is if the child table is a table UI, there is no issue. The only problem is when the second table is ALV
Thanks In Advance

Hi Prashanthi,
Your issue can be resolved as below
Create an event handler method 'set_alv_data' for the event 'ON_LEAD_SELECT' of parent alv
Write the below code inside the event handler method
METHOD set_alv_data.
DATA lo_node TYPE REF TO if_wd_context_node.
DATA lv_path TYPE string.
DATA lv_index TYPE string.
lv_index = r_param->index.
CONDENSE lv_index.
CONCATENATE wd_this->wdctx_my_parent_node
lv_index
wd_this->wdctx_my_child_node
INTO lv_path SEPARATED BY '.'.
lo_node = wd_context->path_get_node(
      path                          = lv_path
DATA lo_interface TYPE REF TO iwci_salv_wd_table.
lo_interface = wd_this->wd_cpifc_alv_child( ). "get the ref of alv comp of child
lo_interface->set_data(
    EXPORTING
*    only_if_new_descr =
      r_node_data       = lo_node
ENDMETHOD.
The above code sets the data node of child alv based on lead selection of parent alv data.
Note: Replace 'parent_node', 'child_node' with your nodes & 'alv_child' with your alv component name of child alv.
If you want to control the data of child alv on filter function, you can use the event ON_STD_FUNCTION_AFTE and once you define the filter you get the r_param->id = 'SALV_WD_FILTER_DEFINE' & now you can clear data of child alv.
Hope this helps you.
Regards,
Rama

ContentPath not working in a loop for a Loader component

Similar Messages

Maybe you are looking for