Contents of functional specs for BW project

Hi
I would just like to know what kind of detail available on functional spec. Suppose you have to create a cube for storing sales data then what are the details you will be mentioning on the functional specification document.
Also what will you be mentioning on tech specs for this.
Please let me know its urgent.
Kind regards,
Nisha.

Hi Bwer,
I would like to know if at all the name of the data sources(BC or customer specific) to be used will be mentioned in the functional specs or will this be mentioned in the tech specs.
Also suppose we have to do some enhancements to the data souces then where will the details  of the enhancements to be made will be mentioned.
Please advice.
Thanks in advance.
Kind regards,
Nisha.

Similar Messages

  • Regarding Creating Functional Specs for BI project

    Hi Gurus,
    I am looking for some documents on "Creating Functional Specs for BI project", as my prokect is in the initial stage.
    Hence we require to collect relevant info for implementing the FI-CO, SD & MM with BI project.
    I will be assigning points.
    My ID is: [email protected]
    Thank you.
    Regards,
    Pradeep Kandepu
    Edited by: pradeep kandepu on May 30, 2008 7:32 AM

    HI shanbhu
    can u please send those document to me also..
    and if you hace send me the Technical spec also
    My id is [email protected]
    Edited by: Bramhananda Reddy on Jun 7, 2008 4:31 PM
    Edited by: Bramhananda Reddy on Jun 7, 2008 4:31 PM

  • Re:Functional Specs for BI project respectively is-retail

    Hi Gurus,
    I am looking for some documents on "Creating Functional Specs for BI project", as my prokect is in the initial stage.
    Hence we require to collect relevant info for implementing there (spectively is-retail )FI-CO, SD & MM with BI project.
    I will be assigning points.
    My ID is: [email protected]
    Thank you.
    Regards,
    Pradeep Kandepu
    Edited by: pradeep kandepu on Jun 8, 2008 5:30 PM

    Hi,
    Check this link,
    [Functional & Tech specs;
    Hope this helps you.

  • Re:Technical Specs for BI project respectively is-retail

    Hi Gurus,
    I am looking for some documents on Creating Technical Specs for BI project, as my prokect is in the initial stage.
    Hence we require to collect relevant info for implementing the(respectively is-retail) FI-CO, SD & MM with BI project.
    I will be assigning points.
    My ID is: [email protected]
    Thank you.
    Regards,
    Pradeep Kandepu
    Edited by: pradeep kandepu on Jun 8, 2008 5:34 PM

    Hi,
    Check this link,
    [Functional & Tech specs;
    Hope this helps you.

  • You are given functional specs for a BDC program

    You are given functional specs for a BDC program
    and you need to decide whether to write a method
    call transaction or a session. How u will decide?
    plz explain clearly

    depends of type of erro handling required and amount of data to be transfered, we can decide which is best method.
    call transaction - no errorhandling, we have to write a code to show errors
    sessin method - errohandling is there, locking mechanism is there.
    for large amount of data , we should go for session method. for faster data transfer we can go for call transaction

  • Anyone written functional specs for reports?

    Please explain how to write functional specs for reports in sales? How is it done? I need to be able to speak clearly in the interview so help is greatly appreciated.
    Thank you.

    Hi Haken,
    Basically functional spec contains the functionality to be implemented.
    http://www.saptechies.com/what-are-functional-specifications/
    Suppose you need to write a spec for Treausry report.
    Then you will write the following things( this is only for your understanding)
    Treasury Report u2013 Receipts & Payments.
    1.Business Requirement Study:
    The Treasury Department of the Corporate Finance Division needs various information for reporting and planning. The proposed requirement would provide information in the form of movements in a number of selected GL Codes involving Customer and Vendor Reconciliation Accounts and Inter-Bank transactions.
    1.1
    Enhancement Title:Treasury Report u2013 Receipts & Payments
    Enhancement Type: Report
    Enhancement Number: 1245m
    SAP Application Module:FI
    Priority (H, M, L):     M     Related Documents:
    1.2
    End User Name(s): XYZ
    Business Process Advisor:     YZX
    Functional Designer: Vivek Baddula
    1.3 Risk Assessment
    This section will address the risk of pursuing the system development. Any unknowns such as new technology and critical dependencies should be discussed in this section.
    1.4  Alternatives
    If there are more than one alternative to handle the business requirement, this section should list such alternatives and the issues that may arise from implementing them. Nevertheless, the optimum alternative discussed in the design overview will be used
    1.5Estimated Budget in Man-Hours
    STAGE     MAN-HOURS
    Design     0.00
    Build     0.00
    Test/Release     0.00
    TOTAL     0.00
    2.Selection screen fields.
    BUKRS           Company Code       parameter         Mandatory
    GJAHR            Fiscal Year            select options   Mandatory
    BELNR            Document Number select options
    SHKZG            Debit/Credit ind       parameter
    DMBTR            Amt.in loc.cur.        parameter
    3.Retrieval Logic:
    Put the selection parameters in table u2018BSEGu2019 and retrieve the following details.
    BUKRS                             Company Code
    GJAHR                             Fiscal Year
    BELNR                             Document Number
    SHKZG                             Debit/Credit ind
    DMBTR                             Amt.in loc.cur.
    WRBTR                            Amount
    PSWSL                             General ledger currency
    HKONT                             G/L Account
    3.1.     Total DMBTR of all BELNR by group and by SHKZG as H and show under the Debit Column of respective groups (Customer/Vendor/Inter-Bank).
    3.2.     Total DMBTR of all BELNR by group and by SHKZG as S and show under the Credit Column of respective groups (Customer/Vendor/Inter-Bank).
    3.4.     Similarly consider only those documents which have a PSWSL ne INR and show them under different group and SHKZG.
    4..     Output Display::
    Here we mention the format of the output and the fields need to be displayed.
    This is just a sample prototype ...
    Hope this will help you...
    Regards,
    Viveks

  • Functional Specs for Mapping Idocs to EDI

    Hello Friends ..
    Am new to world of EDI...
    can any one explain ..wat do u mean by devolping functional specs for mapping IDocs to EDI..
    If you can provide me with examples or if you guys can suggest any site where i can browse some material about EDI..i wud really appreciate...
    Best Regards

    Hi Rohan,
    >>>do u mean by devolping functional specs for mapping IDocs to EDI..
    you have to know which idoc fields you have to map to EDI message fields
    take a look at those links:
    they will show how do you map different IDOC message types to EDI messages
    <b>IDOC - EDI mappings:</b>
    http://www.sapgenie.com/sapedi/mapping.htm
    <b>Analysis of the compatibility of EDIFACT messages in the form of SIMPL-EDI with the IDoc Interface:</b>
    http://www.sapgenie.com/sapgenie/docs/SIMPL-EDI-E_ORDERS.doc
    Regards,
    michal

  • Functional specs for output of ship and debit contract

    Hi All,
    Does anyone have a doc on the functional specs for output of ship and debit contract? If so pls email me at [email protected]
    With Thanks & Warm Regards
    SK

    What is the exact info which you are looking for regarding ship and debit contract?. What do you mean by functional specs..?.

  • Functional specs for BDC

    Kindly can ayone helo me out in prepare Functional specs for BDC For f-28

    Hi
    There is no need of preparing FS (Functional Specs) for BDC.
    You can Record the BDC and just give the Recording Name to the ABAP Guy, he will prepare the BDC based on that recording.
    Go to SHDB and do the Recording.
    Regards
    Venkat

  • Functional specs for customer hierachy

    Dear Gurus,
    I need to develop functional specs for customer hierarchy.the requirement is to create a new hierarchy type and move all the existing records from the present customer hierarchy setup since the present system has lot of scrap data.for this i need to develop a functional and technical specs.can anyone please send it to me.can any one please help me here at vsapservicesatgmail.com.
    thanks,
    sap_consultant
    Edited by: sap_consultant1234 on Dec 30, 2011 5:51 AM

    Hi Utpal,
    Welcome to SDN,
    Being a newcomer to forum before posting the thread read the forum rules,you are asking to send the details to your mail which is forbidden by the forum.
    Coming to the thread  Customer Hierarchies stored in table KNVH,go to SE16N give the table KNVH get valid inputs and build
    valid logic.
    Regards
    Ram

  • Functional specs for Open BI reports

    Hi
    Has anyone written functional specs BI report. Can you help me out with an example?
    Thanks
    Tarang

    Hi Tarang,
    I never got an oppertunity to developed a Functional Spec for BI to my knowledge it is not a big deal to prepare it.
    Here we go you must be having atleast what you want from R/3 or the Functional Spec from Functionl req.
    That will contain the R/3 Fields and Table names, so based on that you have to find which app area does it comes.
    Then from there by seeing the fields and cross checking the Datasourcess under that application you can decide the the data source.
    Once the data source is decide you can prepare the Gap analisys to proceed further.
    By above details you can prepare a Functional Come Tech Spec.We made all these kind of specification(Functional Come Technical Spec).
    I believe there is no saparate Functiuonal Spec for BW activities.
    Best Regards,
    VNK.

  • Functional spec for STO

    Hi
    Could some one provide functional spec for a( STO) z report to  fetch below data  .
    Receving point
    ship to party
    STO number
    Material number
    delivery creation date
    quantity in storeage location

    Dear Rajakumar Reddy,
    Your client/company will be having a format for FS.
    In that FORMAT, give your inputs for STO Report based on the following points.(as i dont have system access now, check yourself before concluding. to find the table and fields, you have to press F1 on the value in the screen)
    Receving point - in ME22N/ME23N, put the mouse over the receiving plant and press F1. You will get the table and field.
    ship to party - in LIKP check for KUNNR/KUNAG
    STO number in LIKP check for VBELN
    Material number - in LIPS check for  MATNR
    delivery creation date- in LIKP check for DATE
    quantity in storeage location - GET THE TABLE FOR MMBE and input the material and storage location to fetch QTY.
    Thanks & Regards,
    Hegal K Charles

  • FUNCTIONAL SPEC FOR GL BALANCES

    THere is a functional spec for LSMW for uploading gl balances thru FB01. There are feilds like legacy account, sub account and other fields that the business user wants to flow into SAP. But in FB01 there is only one reference field which i have used for legacy account number. How do we create additional fields in FB01 in order to input other fields like legacy sub accounts and other info that would flow into SAP.
    I was told to work with crosswalk tables. WHat are they and how do I use them here. Please provide detailed instructions on how to bring in additional fields from legacy into FB01
    Thanks

    Lakshmi, can you please send me the format of that func spec, if possible?

  • Functional Spec for Purchase Order Layout Sample

    Hi,
    Can somebody please assist me with a sample Functional spec. for defining a PO form/ layout?
    Thanks

    Hi
    yes usually customers ask to adopt the same layout as they are already using. Usually I draw the layout on visio and assign a number for each field. In the spec I put the layout picture and and mention for which field where data will come from.
    For example:
    A. PO header:
    Field number | Description | Source
    1 | PO number | EKKO-EBELN
    2 | Vendor code | EKKO-LIFNR
    3 | Vendor name | LFA1-NAME1 * rule 1
    C. Rules:
    1 - select NAME1 from table LFA1 where LFA1-LIFNR = EKKO-LIFNR
    Hope this helps.
    Regards
    Eduardo Chagas

  • Functional specs for generating Report.

    < MODERATOR:  All points have been UNASSIGNED and the message locked.  Please do not share email addresses, documents, or links to copyrighted or company confidential information on these forums. >
    Hi
    This is Sunil garg Sd consultant.
    Can any body provide me the format with exaples for writing a functional specs to generate the Reports.
    How we will write yhe processing logic of that repot.
    Tables & thier relations.
    Please Help me
    Thanks & Regards
    Sunil garg

    Patial example of Functional Specs. Please map it in Excel & it will give you better clearity. This is Sample for SD report covering Link Between Project System, Sales Order, Delivery, Billing & Accounting Document
    <b>Initial Screen</b>:
    Fields | Table-Field | Remark | Table Joint
    Sales Organization | VBAK-WAERK | Single Selection
    Distribution Channel | VBAK-VTWEG | Multiple Selection
    Division | VBAK-SPART | Multiple Selection
    Sales office | VBAK-VKBUR | Multiple Selection
    Sold to Party | VBPA-KUNNR | Multiple Selection | VBAK-VBELN=VBPA-VBELN
    Material | VBAP-MATNR | Multiple Selection | VBAK-VBELN=VBAP-VBELN
    WBS Element | VBAP-PS PSP PNR | Multiple Selection | VBAK-VBELN=VBAP-VBELN
    Sales Order Type | VBAK-AUART | Multiple Selection
    Billing Type | VBRK-FKART | Multiple Selection | VBAK-VBELN=VBFA-VBELV & VBRK-VBELN=VBFA-VBELN
    Period
    <b>Main Screen</b>:
    <i>Header</i>
    Sales Organization | VBAK-VKORG
    Period
    <i>Item Level</i>:
    Sold-to-Party | VBPA-KUNNR where VBPA-PARVW = AG
    Distribution Channel | VBAK-VKWEG
    Division | VBAK-SPART
    WBS Element | VBAP-PS_PSP_PNR
    Sales Office | VBAK-VKBUR
    Sales Doc type | VBAK-AUART
    Sales Doc No | VBAK-VBELN
    Material | VBAP-MATNR
    Mat Desc | VBAP-ARKTX
    Qty | VBAP-KWMENG
    UOM | VBAP-MEINS
    Doc Currency | VBAK-WAERK
    Delivery No | LIKP-VBELN
    Billing Document Type | VBRK-FKART
    Billing Document No | VBRK-VBELN
    Billing Document Line No | VBRP-POSNR
    Quantity | VBRP-FKIMG
    Price - Base Price
    Price - Service Tax
    Price - Education Cess
    Price - VAT
    Price - Other taxes
    Price - Total
    Accounting Document Number | BKPF-BELNR
    Table Joints at Item Level:
    VBAK-VBELN = VBPA-VBELN
    VBAK-VBELN = VBAP-VBELN
    VBAK-VBELN = VBFA-VBELV (For Delivery)
    VBAK-VBELN = VBFA-VBELV
    LIKP-VBELN = VBFA-VBELV
    VBRK-VBELN = VBRP-VBELN
    VBRK-XBLNR = BKPF-XBLNR
    some details are missing, please try to identify & use it as per your requirement.
    Regards,
    Rajesh Banka
    Reward suitable points.
    How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread).

Maybe you are looking for

  • Application server

    Hi All, is there any function module for validate the file in application server.not for application server path .i need validations for file in particular path.i tried with function modules like 'cl_gui_frontend_services=>directory_list_files', 'FIL

  • Migrating Itunes from Windows XP computer to IBook

    I what to migrate my Itunes libray from my XP computer to my IBook. I can use an external Hard drive to do the migration. What is the best way to do this so I do not drop off my play list etc? What folder and Files do I have to copy over and to where

  • Cannot Import javax.swing.JOptionPane   Please HELP!!!

    import javax.swing.JOptionPane; this line of code returns the error: C:\Java Files\BankAccount\BankAccount_Test.java:1: Class javax.swing.JOptionPane not found in import. import javax.swing.JOptionPane; ^ 1 error Process completed. Please help, I don

  • Riddle me this-. Orange Render bar for some clips

    I hope my system isn't getting tired and old but I have never had a project where all the clips needs to be rendered. No effects applied or anything. I converted these clips to Apple Pro Res(LT) and I still need to render. When I convert my RED foota

  • DST - Choose the key from the allowed namespace

    Hi everyone. I am trying to add the new Timezone setting as per note 919538. When I do, I get a message "Choose the key from the allowed namespace". Another search in OSS said that this can only be correct with a support pack. Does anyone else have e