Contents of message field abruptly disappear, replaced by bits of other e-mails

This happens only intermittently, but it's a disaster when it does. I'm opening a series of messages in my inbox, and when I return to one that was opened earlier, suddenly its contents have been wiped out. Sometimes they're replaced by mangled passages from the message field of other e-mails.
Surely I can't be the only user who has experienced this glitch, right?
I use the latest version of TB on two computers, one running Windows 7 and the other running 8.

While It is not desirable, I do not really see it as a bug in either program. At worst the anti virus is being overly aggressive.
The issue is about file locking and access. Like two children sharing ice cream, both want their hand in the tub at the same time.
Thunderbird suffers badly from these sorts of issues because it has very large files, often in the Gigabyte range, and anti virus programs take around 5 minutes to scan a 1 Gigabyte file.
Press F10 to see the main menu if it is not visible
Click on the Troubleshooting information in the Help menu
Click on the show button for the profile
That is your profile folder. as the location contains random characters this is the easiest way t be sure you get there.

Similar Messages

I am trying to use a interactive form and it says "If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document." This is a IRS form and has worked before.

I am trying to use a interactive form and it says "see below" This is a IRS form and has worked before.
is there a tech support phone number?
Please wait...
If this message is not eventually replaced by the proper contents of the document, your PDF
viewer may not be able to display this type of document.
You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by
visiting http://www.adobe.com/go/reader_download.
For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader.
Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark
of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries

That means you are looking at the form online with a browser that uses its own (incompatible) PDF viewer, not the Adobe Reader plugin.
Either
download the form to your local disk and fill it from there
use a browser that employs the Adobe Reader plugin
configure your browser to use the Adobe Reader plugin: http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

I cannot open a PDF in either Chrome or Firefox. I have uninstalled and reinstalled Adobe Reader XI.0.09 and restarted my computer. This is the error I receive:Please wait... If this message is not eventually replaced by the proper contents of the do

I cannot open a PDF in either Chrome or Firefox. I have uninstalled and reinstalled Adobe Reader XI.0.09 and restarted my computer. This is the error I receive: Please wait... If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document. You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/go/reader_download. For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader. Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.

Or http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

Cursor positioning in table control: marking content of a field

Hello everybody,
I use a table-control for data input. For fast data input, my customers need dynamic positioning of the cursor. I'm using the set cursor field ... line ... statement and it works fine, except for one problem with a large text-field:
Is it possible to set the cursor in a field plus mark all the content of the field? The behaviour, i'm looking for is that any input in the field will replace the existing content. Is there any other option?
Thank you for any suggestions, regards, Kathrin!

So you want dynamic cursor positioning within a table control. Take a look at FM SCROLLING_IN_TABLE and demo program DEMO_DYNPRO_TABCONT_LOOP. If this does not address your requirements the you can do it manually as follows:
For example, your internal table has 30 rows, your table control displays 10 rows (value of sy-loopc) at one time. The value of <tabctrl>-top_line contains 11, meaning you are at the second page of table control. Your cursor is at 12th row and now on pressing ENTER, you want the cursor to be positioned at 13th row.
In your PAI, issue the statement GET CURSOR LINE <lineno>. This will give you the current cursor position in the table control with reference to the top row currently displayed. So the value of <linno> will be 2.
In your PBO, calculate the next line no to position your cursor into. This can be done by the formula:
next_line = <tabctrl>-TOP_LINE + <linno> - 1.
Then issue the statement SET CURSOR FIELD <field_name> LINE <next_line>.
Hope this helps.
Regards
Message was edited by: Shehryar Khan

ABAP stack configuration for content based message search in PI 7.

Hi experts,
I am trying to eanble Content based message search in PI7.11 SP10.
My requirement is to Filter message in PI moni based on a particular DeviceID field in the paylaod.I have set filters in SXMS_LMS_CONF.
But upon testing the extractor, the messages are extarcted based on the interface mentioned in the filter criteria, and not the particluar field of the message.
I have referred a few bolgs on this topic , but could not find a relevant solution to my issue. Am i missing any configurations in this? Or is his not possible without TREX.
Could anyone suggest a solution for this.
Thanks.

Filter
Extractor:
XPath: nm:XXXXXCreateRequest/MeterReadingDocument/UtiltiesMeasurementTask/UtiltiesDevice/UtilitiesDeviceID

How to display the variable content in message?

Hi anybody
please let me know How to display the variable content in message?
please send few lines of sample code to understand that
thanks in advance

Hi,
Check out the link
http://help.sap.com/saphelp_nw70/helpdata/en/2c/840b42202cce6ce10000000a155106/content.htm
REPORT Y9020027 LINE-SIZE 130.    "Release 3.1G, 4.5A
BREAK-POINT.
MOVE: 'TESTREPORT for    "ASSIGN FFeld+o(l) TO "        '
        TO SY-TITLE.
      Declaration of variables    **********************
FIELD-SYMBOLS <FS1>.
DATA: FFELD8(8)   TYPE F VALUE '1022333'.   "Unusual: Explicit 8 bytes
*DATA: ZFELD1(2)    TYPE N.            "Here slack bytes are (DW border)
                                     "necessary
              "If you like computing error, please uncomment the above
DATA: FFELDX(8)   TYPE F VALUE '7777777'.
DATA: FFELDA(8)   TYPE F VALUE '7333213'.
DATA: NFELDX(400) TYPE N.
DATA: OFFX(4) TYPE I VALUE 160.
DATA: LENX(4) TYPE I VALUE 8.
              Main Section             *******************
    SKIP.
    WRITE: /5 'Example 1   **** inadmissible ASSIGN ***' COLOR 6.
    WRITE: /10 'Inadmissible ASSIGN: ''ASSIGN FFELD4+1(3) TO <FS1>'' '.
ASSIGN FFELD4+1(3) TO <FS1>.
    ULINE.
    SKIP 2.
    SKIP.
ASSIGN FFELD8+8(8) TO <FS1>.     "<-- Assigning of variable FFELDX !!
    BREAK-POINT.
    WRITE: / 'ASSIGN command with FFELD8, but FFELDX will be assigned'
              COLOR 3.
    WRITE: /5 'Example 2'.
    PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
    WRITE: /10 'Content of   FFELDX      :', FFELDX.
    ULINE. SKIP 2.
    SKIP.
ASSIGN FFELD8+16(8) TO <FS1>.    "<-- Assiging a few FFELDA to <FS1>
    BREAK-POINT.
    WRITE: / 'ASSIGN with FFELD8, but instead FFELDA is assigned'
              COLOR 3.
    WRITE: /5 'Example 3'.
    WRITE: /10 'Content of   FFELDA      :', FFELDA.
    PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
    WRITE: /10 'Content of   FFELDA      :', FFELDA.
    ULINE. SKIP 2.
BREAK-POINT.
   DO 4 TIMES.
     ASSIGN FFELD8+OFFX(LENX) TO <FS1>.     "Zuordnung auf OFFX zu <FS1>
        WRITE: / 'ASSIGN command with FFELD8, es wird NFELDX zugeordnet'
                  COLOR 5.
         WRITE: /5 'Example 4', 'DO-Schleife Nr.:', SY-INDEX.
         PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
         WRITE: /10 'Content of NFELDX145(40) :', NFELDX145(40).
         ULINE. SKIP 2.
         ADD 8 TO OFFX.
   ENDDO.
               Subroutines             *******************
           Display of data fields and field symbols                  *
FORM DISPLAY-FFELD USING FFELD FNAME.
WRITE: /10 'Content of', FNAME, ':', FFELD.
PERFORM FELDEIGENSCHAFTEN USING FFELD.
WRITE: /10 'Content of <FS1> :', <FS1>.
PERFORM FELDEIGENSCHAFTEN USING <FS1>.
ADD   111    TO <FS1>.               "<-- Das Feldsybmol wird verwendet
WRITE: /10 'ADD 111 TO <FS1>'.
ULINE.
WRITE: /10 'Content of', FNAME, 35 ':', FFELD.
WRITE: /10 'Content of <FS1>', 35 ':', <FS1>.
ENDFORM.
   Determination of field properties (only for information)          *
FORM FELDEIGENSCHAFTEN USING ALLG.
DATA: FLAENGE(2) TYPE N.
DATA: FTYP(1) TYPE C.
DATA: FOUT(2) TYPE N.
DATA: FDEZ(2) TYPE N.
ULINE.
DESCRIBE FIELD ALLG LENGTH FLAENGE.
WRITE: /10 'Field length :', FLAENGE.
DESCRIBE FIELD ALLG TYPE FTYP.
WRITE: /10 'Field type    :', FTYP.
DESCRIBE FIELD ALLG OUTPUT-LENGTH FOUT.
WRITE: /10 'Output length :', FOUT.
DESCRIBE FIELD ALLG DECIMALS FDEZ.
WRITE: /10 'Decimals      :', FDEZ.
SKIP 1.
ENDFORM.
END OF PROGRAM *************************************

Performance impact of Content based message search in IE

Hello Experts,
I am working on implementing Content based message search in IE in PI 7.0 and PI 7.1 landscape.
All the configurations are done and its working fine in Development scenario.
I need help in identifying , how this actually works on technical level as in how the messages are getting searched based on the filter criteria, if there is any table getting created in background and values are getting stored etc.
And also how could this impact the overall performance after implementing it in Production system.
Thanks in advance!
Warm Regards,
Lisin

Hi Lisin
Not sure about 7.0/1 but for 7.4 these are the tables.(most probably tables should be same)
When you configure a filter for UDMS search on ABAP stack(Tcod: sxms_lms_conf)
Entries will be created in the following backed ABAP tables. (you can go to se16 and check the entries).
SXMS_LMS_EXTR
SXMS_EXT_FIL
SXMS_NSPREFIX
Data will be stored in this table
SXMSPDATA
When you configure a UDMS filter in RWB(java stack), entries will be created in the following backend tables
XI_AF_LMS_EXTRACTR
XI_AF_LMS_FILTER
Data will be stored in the table (only the message id, direction, key field,value and position)
XI_AF_LMS_DATA
We have UDMS configured in our production system, and i never saw any performance issue.
Regards
Osman

The 'reply' and 'new message' bar has disappeared from mail on my iPad since I upgraded my Macbook Pro from OSX10.5 to 10.6. How do I get it back?

The 'reply' and 'new message' bar has disappeared from mail on my iPad since I upgraded my Macbook Pro from OSX 10.5 to 10.6. How can I get it back?

Updating your Mac's OS X version won't have affected how the Mail app (I assume that it's the Mail app that you are using, not Safari) shows on your iPad. If you don't have the menu bar showing in the Mail app then try closing the Mail app via the iPad's multitasking bar and see if it shows when you re-open it : iOS: Force an app to close
If that doesn't fix it then you could try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Conversion of content HTML of field CLOB

It would like to know if it exists some resource directed toward the content conversion of field CLOB I contend standards HTML please are alguem will have the solution send for me Thanks Marcão Souza

Hi guy!
try this. tks.
tks;
Moderator message - Thinly disguised point begging removed.
DATA oauszt TYPE eauszt.
DATA: loauszt TYPE f.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
    EXPORTING
      input                 = loauszt (6.4920000000000000E+03)
      unit_in              = 'S'                         "Einheit 1
      unit_out            = 'H'                        "Einheit 2
    IMPORTING
      output               = loauszt
    EXCEPTIONS
      conversion_not_found = 2
      input_invalid        = 4
      output_invalid       = 4
      type_invalid         = 4
      division_by_zero     = 6
      overflow             = 8
      units_missing        = 10
      unit_in_not_found    = 12
      unit_out_not_found   = 12.
oauszt = loauszt.

Clear the contents of a field on open

Hello,
I would like to clear the contents of a field upon opening a form record. This field will then be populated with the logged on user name, V('APP_USER'). This is to display the user who last edited the record.
Does anyone know how to do this? The field will only update if it is empty to start with so I need to delete the field contents only if the 'Save' button is pressed and then replace it with the current logged in user.
Thankyou in advance,
Kind Regards,
Steve Welch

Hello Scott,
Sorry it was very simple in the end. Thanks for pointing me in the right direction. PL/SQL Expression, V('APP_USER')
Kind Regards,
Steve Welch

What does the corrupted content error message mean when FireFox 7.0.1 tries to open a web page?

Corrupted Content Error. The page you are trying to view cannot be shown because an error in the data transmission was detected. Please contact the website owners to inform them of this problem. Ever since FireFox updated to 7.0.1 this error occurs.
Signing out of Hotmail generates that message I mentioned: Corrupted Content Error. The page you are trying to view cannot be shown because an error in the data transmission was detected. Please contact the website owners to inform them of this problem. Ever since FireFox updated to 7.0.1 this error occurs. How do I stop it? Now it appears to be doing it across multiple websites. The TRY AGAIN button always comes up when initially trying to load a webpage - very frustrating.

You can get a "Corrupted Content Error" error if there are multiple location redirects send via the HTTP response headers or other entries may be wrong.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=681140 bug 681140] - Corrupted Content error due to multiple Content-Disposition header field instances

My messaging function has disappeared from my iphone 5S, it's no longer in my settings

My messaging function has disappeared from my iphone 5S, it's no longer in my settings & I have no messages icon. When I get a SMS message it shows in my notification screen with the heading com.apple.MobileSMS, it will not let me click into the message or reply. Please can anyone help?

Use the form on this page to request a free redownload, or use the Transfer Purchases feature. If neither of these works, you will need to purchase the songs and other content again to get them back; Apple needs to pay the copyright holders for each download from the iTunes Store other than podcasts and album artwork.
(32837)

Reading contents of a field from a screen

Hi all,
     Is there a way to read the contents of a field in a particular screen. I want to read the data entered into a particular field on a screen into the BADI and implement the logic based on the contents of the field.
Thanks.
Neha.

Hi,
You can use following code
data: it_dynpfields type STANDARD TABLE OF DYNPREAD,
      wa_dynpfields type dynpread.
wa_dynpfields-fieldname = 'CURR_PHASE'.
append wa_dynpfields to it_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
    dyname                               = SAPLCRM_1O_MANAG_UI
    dynumb                               = "<screen number where field is defined>
*   TRANSLATE_TO_UPPER                   = ' '
*   REQUEST                              = ' '
*   PERFORM_CONVERSION_EXITS             = ' '
*   PERFORM_INPUT_CONVERSION             = ' '
*   DETERMINE_LOOP_INDEX                 = ' '
*   START_SEARCH_IN_CURRENT_SCREEN       = ' '
*   START_SEARCH_IN_MAIN_SCREEN          = ' '
*   START_SEARCH_IN_STACKED_SCREEN       = ' '
*   START_SEARCH_ON_SCR_STACKPOS         = ' '
*   SEARCH_OWN_SUBSCREENS_FIRST          = ' '
*   SEARCHPATH_OF_SUBSCREEN_AREAS        = ' '
tables
    dynpfields                           = it_dynpfields
EXCEPTIONS
   INVALID_ABAPWORKAREA                 = 1
   INVALID_DYNPROFIELD                  = 2
   INVALID_DYNPRONAME                   = 3
   INVALID_DYNPRONUMMER                 = 4
   INVALID_REQUEST                      = 5
   NO_FIELDDESCRIPTION                  = 6
   INVALID_PARAMETER                    = 7
   UNDEFIND_ERROR                       = 8
   DOUBLE_CONVERSION                    = 9
   STEPL_NOT_FOUND                      = 10
   OTHERS                               = 11
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
hope it helps

Duplicate content of region fields in the region and keep some fields

duplicate content of region fields in the region and keep some fields displayed in this region and some not.
Our customer wants to duplicate the content of the region fields and 3 fields of this region (one of them is the key from the table ) have to be shown empty and have to be recreated when he does the next commit. The other 25 fields have to be filled with the content before. (I have to do a commit before I show the region again without these three fields)
What I did:
When I have a botton with request CHANGE then APEX does the change without emptying the fields. I tried to make processes on this request which should empty my three fields, but the processes never fire (I see it in the debug and I don't know why, I putted them on every process point for testing)
The second try:
On my button with request CHANGE , I filled the 'set these items ' with my three fields and the 'with these items' with 2 commas ,, to set these items null.
I do no claer cache, but APEX empties the hole region.
Can you help me??
Thanks Uta

Hi Uta,
OK - This is what I did:
1 - Page 15
On the EMPNO column, I have a link to page 18. I set P18_EMPNO to #EMPNO#. I assume that you already have this functionality to link from the report page to the form page. There are no changes required to this page.
2 - Page 18
I have created a hidden field called "P18_EMPNO_COPY". There are no special settings for this item - I've just put it at the bottom of the region containing all of the other items
I have created a button called "P18_COPY". This has a Conditional Display set with a Condition Type of Value of Item in Expression 1 IS NOT NULL and Expression 1 of P18_EMPNO. This has an Option URL Redirect set for it with the following settings:
Target is a - Page
Page - 18
Set These Items - P18_EMPNO,P18_EMPNO_COPY
With These Values - ,&P18_EMPNO.
I have created a Process to run "On Load - After Header". The PL/SQL code for this is:
DECLARE
emp_rec EMP%ROWTYPE;
BEGIN
SELECT * INTO emp_rec FROM EMP WHERE EMPNO = :P18_EMPNO_COPY;
:P18_EMPNO := NULL;
:P18_JOB := emp_rec.JOB;
:P18_MGR := emp_rec.MGR;
:P18_SAL := emp_rec.SAL;
:P18_DEPTNO := emp_rec.DEPTNO;
END;
This has a Conditional Processing Condition Type of "Value of Item in Expression 1 is NOT NULL" and Expression 1 shows P18_EMPNO_COPY
Finally, for each field, I have added in a Default Value that points to itself (For example, the P18_JOB field has a Default Value of :P18_JOB) with a Default Value Type of PL/SQL Expression.
Obviously you will need to replace the field and item names with those for your table and form.
This process does the following:
1 - The user clicks the link in the report on page 15. P18_EMPNO gets populated with the EMPNO value of the item select.
2 - Page 18 is loaded with the data relating to the record with the ID found in P18_EMPNO
3 - The Copy button is displayed only if P18_EMPNO contains a value
4 - The user clicks the Copy button
5 - The P18_EMPNO value is copied into P18_EMPNO_COPY and P18_EMPNO is blanked out
6 - The page is submitted with these changes. When it reloads, the new process kicks in
7 - This process will:
(A) Create a variable based on the record structure for the EMP table
(B) Fill this variable with the data in the table for the ID that's now in P18_EMPNO_COPY
(C) Set the session state values for the fields that need to be repopulated with the data now retrieved into the variable
(D) Clear the P18_EMPNO session state value
8 - When the page starts to load the form, it will see that there is no P18_EMPNO value and, therefore, will not bring in any information from the table. However, as we have now set the Default Value settings for each field, this will force it to retrieve the values we've stored using the new process and display these values in the form.
I think I've detailed everything - if this doesn't work, please let me know!
Regards
Andy

Why did the contents of my states panel disappear?

Why did the content of my States Panel disappear?

Hello!
I can recommend you do the following:
1/ Quit Mail completely via the Mail-menu
2/ Open the Finder and find the go-menu near the top left corner of your computer display (not the Finder-window) Choose go to folder.
Copy-paste the following line into the field that appears, including the ~ :
~/library/mail/v2/maildata/
3/ Move all files that start with "envelope" and "ExternalUpdate" to the trash. Don't empty the trash in case we need to restore these files (which is not likely, but still)
4/ Restart OS X. Open Mail. Now it will re-import your existing mail. Is your issue solved after this?

Contents of message field abruptly disappear, replaced by bits of other e-mails

Similar Messages

Maybe you are looking for