Context for linux missing

after completing the installation of the linux version i was a
little disappointed that context is not part of the package.
will context be released for linux ?
null

Michael Greve (guest) wrote:
: after completing the installation of the linux version i was a
: little disappointed that context is not part of the package.
: will context be released for linux ?
There is Context for Linux but it is a part of the Enterprise
edition and not part of the free Development Edition. I believe
the situation is the same for all platforms. If you want Context
you need to pay for it :-(.
Vladimir
null

Similar Messages

ConText for Linux

Hello,
Anyone have any idea when ConText will be avalible for Linux? All
the docs make it seem like it's in the release, but the Release
Notes say it's not available.
Thanks,
Jamison
null

Jamison Stepan (guest) wrote:
: Hello,
: Anyone have any idea when ConText will be avalible for Linux?
All
: the docs make it seem like it's in the release, but the Release
: Notes say it's not available.
exactly. i haven't found any info on the net when its gonig to be
available.
any comments from oracle ?
null

Missing table begin XSL context for: ?end if?

I have 8 if clauses with grouping sub grouping data shown.
when I try to validate my RTF file I am getting following error msg:
[061112_073853972][][ERROR] [Line 3322.83] Missing table begin XSL context for: <?end if?>
[061112_073854018][][ERROR] [Line 3624.134] Missing table begin XSL context for: <?end if?>
[061112_073854050][][ERROR] [Line 3878.184] Missing table begin XSL context for: <?end if?>
[061112_073854081][][ERROR] [Line 4203.183] Missing table begin XSL context for: <?end if?>
[061112_073854112][][ERROR] [Line 4479.134] Missing table begin XSL context for: <?end if?>
[061112_073854143][][ERROR] [Line 4870.182] Missing table begin XSL context for: <?end if?>
[061112_073854190][][ERROR] [Line 5201.182] Missing table begin XSL context for: <?end if?>
I have check each and every <?if:...?> clasue and it's corresponding <?end if?> clause

Issue has be identified:
It was a end of group statement after the structure of table.
all of <?end for-each-group?> end tage should be in a table and only if (open and close) statement should group them.

Is a edelivery file missing.... BI 11.1.1 for linux 64-bit Part # B60230-?

Hi,
Ive deen downloading Oracle Business Intelligence 11.1.1.0.0 for Linux x86 64-bit Part # B60230-13. Theres EPM System Release 11.1.2.2.0 for Linux x86-64 Part 1 thru 4 and then Part 6 thru 7.
Is Part 5 missing or not needed ? Can someone pl. confirm if this media pack is complete and that they didnt have problems installing.

Thanks a lot for the help.
+Installing OBIEE 11g On Linux 64-bit Fails Running The Configuration Assistant With "Step Creating Asinstance Failed" [ID 1304640.1]+
I check for the library libaio, and it's all ok on my system.
+Error: "Oracle.as.provisioning.util.ConfigException: Error While Starting the Domain." Whilst Installing OBIEE 11G [ID 1272906.1]+
I check on my DNS server, and seem have some problem.
So, i try with IP static, and works !
Roberto

Is ConText Cartritge in CD Oracle8 for Linux??

Is ConText Cartritge in CD Oracl8 Server Pre-production Version
8.0.5 for Linux??? That is the CD that oracle release one month
ago. Anybody has noted ConText is there???
Thanks in advance
null

Marc Vaquer (guest) wrote:
: Is ConText Cartritge in CD Oracl8 Server Pre-production Version
: 8.0.5 for Linux??? That is the CD that oracle release one month
: ago. Anybody has noted ConText is there???
: Thanks in advance
I take you did not understand my response or simply chose to
ignore it. Early Adopters Realease = EAR = Pre-production release
Look at my response to your earlier message.. If that is not too
much trouble for you.
null

Oracle 10g (10.1.0.2) for Linux x86 missing from download page?

Hello,
Why isn't there a download link to Oracle 10g (10.1.0.2) for Linux x86 on the 10g download page?
And what's the difference between 10.1.0.3 and 10.1.0.2?
Thanks

Hi, 
 The level of one release is different with plateform.
On the Oracle Database 10g Downloads you can find only final release, and not intermediare patch. For example, the 10gR1 for Linux x86 is 10.1.0.3, and for Windows 32-bits this is 10.1.0.2, after what you can upgrade to the last patchset.

 Nicolas.

9iDS for Linux - OWB, Disco Admin etc are missing from download

I've just installed 9iDS release 2 on a laptop running SuSE 8.0 and Oracle 9i release 2 Enterprise Edition.
As my work primarily involves 9i database and OWB 9i, I was to say the least dissappointed that 9iDS for Linux does not include OWB, or for that matter Disco Admin or Reports Admin.
When you go to download 9iDS for Linux, the download page says "This download includes the full distribution of Oracle9iDS", and the previous page (which lists all the elements of the download, next to the links for Windows, Linux, HP-UX and so on) does not in any way indicate that OWB is not included in the download.
There is, separately downloadable, an 'early adopters' release of OWB for Linux, but this does not include the bridging technology to Discoverer, Express and 9i OLAP. As it's 'early adopted' presumably it's not too stable.
Has anyone used this? Has anyone tried using a laptop purely with Linux on it as a way of using 9iDS? Does anyone at Oracle know when a full release of 9iDS, with all the elements found in the Windows release, will be made available? In the meantime, Oracle should clearly state on the Linux download page that not all the elements of 9iDS are found in the Linux version.
Mark Rittman
Plus Consultancy.

I don't know the answer, but Designer will never be ported to Linux : It is a Windoze stuff...and without Designer...i will never be able to do 100% Linux :(

Trying to install ALUI Interaction 6.1 MP2 for Linux

I was wondering if anyone has any idea about some issues that I have been having trying to install ALUI User Interaction 6.1 MP2 for Linux.
Here are the specs that I have:
OS: Ubuntu 8.10
Preinstall file run under root: yes
Error Message:
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
nawk: error while loading shared libraries: libm.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.7280/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
I would appreciate if anyone has any idea how come I am getting the libraries missing issue? I have tried many things but still getting all the same issues with the intsaller. I checked and I have all the libraries as listed too under /lib. If anyone can tell me how I can overcome this that would be greatly appreciated. Thank you very much in advance.
Edited by: user3033086 on 16/03/2009 16:16

Hi,
What you need to do is:
cat ALUI_Interaction_MP1 | \
sed "s/export LD_ASSUME_KERNEL/#xport LD_ASSUME_KERNEL/" > \
ALUI_Interaction_MP1_sed
This command will get sed to create a new file that has removed the LD_ASSUME_KERNEL from it. Thus you can run the file and it shouldnt give you any errors.
Thanks.

Help! Errors in installing Oracle 8.0.5 for Linux on RedHat

Hi, everyone:
Oracle free installation support group points me here. They
said: "Unfortunately, the trial release of Oracle8 for Linux is
not supported by this group. You can obtain peer support on the
Oracle8 for Linux trialproduct from the discussion group on the
Oracle Technology Network (OTN)(http://technet.oracle.com). "
Thanks in advacnce.
=================================================================
===
SAVED PROBLEM REPORT:
=================================================================
===
Thu Apr 8 20:28:10 EDT 1999 Platform: unixRelease:
8.0.5Product: rdbms_common
Version: 8.0.5.0.0Area: (Installation) Install
information:
Installer Version: 4.0.3.0.0 Installer Script: [
rdbms_common.ins 907 ]
Install Action: Complete Software/Database Fresh
Install
Stage Home /mnt/cdrom Oracle_Base
/u01/app/oracle (true)
Oracle Home /u01/app/oracle/product/8.0.5
Owner oracle
Log
/u01/app/oracle/product/8.0.5/orainst/install.log
During installation of the above product the error below
is encountered:
Error during action 'Creating ntcontab.o'.Command: make -f
/u01/app/oracle/product/8.0.5/network/lib/ins_network.mk
ntcontab.o
(if [ "compile" = "compile" ] ; then \
/u01/app/oracle/product/8.0.5/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\ rm -f
/u01/app/oracle/product/8.0.5/lib/ntcontab.o ;\
mv ntcontab.o /u01/app/oracle/product/8.0.5/lib ; fi)
/u01/app/oracle/product/8.0.5/bin/gennttab:
/u01/app/oracle/product/8.0.5/bin/get_platform: No such file
ordirectory
ntcontab.c:7: sys/types.h: No such file or directory
mv: ntcontab.o: No such file or directorymake: *** [ntcontab.o]
Error 1
=================================================================
===
=================================================================
===
SAVED PROBLEM REPORT:
=================================================================
===
Thu Apr 8 20:29:19 EDT 1999 Platform: unixRelease:
8.0.5Product: rdbms_common
Version: 8.0.5.0.0Area: (Installation) Install
information:
Installer Version: 4.0.3.0.0 Installer Script: [
rdbms_common.ins 907 ]
Install Action: Complete Software/Database Fresh
Install
Stage Home /mnt/cdrom Oracle_Base
/u01/app/oracle (true)
Oracle Home /u01/app/oracle/product/8.0.5
Owner oracle
Log
/u01/app/oracle/product/8.0.5/orainst/install.log
During installation of the above product the error below
is encountered:
Error during action 'Creating ntcontab.o'.Command: make -f
/u01/app/oracle/product/8.0.5/network/lib/ins_network.mk
ntcontab.o
(if [ "compile" = "compile" ] ; then \
/u01/app/oracle/product/8.0.5/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\ rm -f
/u01/app/oracle/product/8.0.5/lib/ntcontab.o ;\
mv ntcontab.o /u01/app/oracle/product/8.0.5/lib ; fi)
/u01/app/oracle/product/8.0.5/bin/gennttab:
/u01/app/oracle/product/8.0.5/bin/get_platform: No such file
ordirectory
ntcontab.c:7: sys/types.h: No such file or directory
mv: ntcontab.o: No such file or directorymake: *** [ntcontab.o]
Error 1
=================================================================
===
LINUX ENVIRONMENTAL VIABLES DUMPED===========================
Machine Environment:--------------------
User: uid=502(oracle) gid=502(dba) groups=502(dba)
Current Directory: /mnt/cdrom/orainstMachine: {
Linux localhost.localdomain 2.0.36 #1 Tue Oct 13
22:17:11 EDT 1998i586 unknown
[From uname -a] localhost.localdomain [From
hostname]}Ulimit: {
core file size (blocks) 1000000 data seg size
(kbytes) unlimited
file size (blocks) unlimited max memory size
(kbytes) unlimited
stack size (kbytes) 8192 cpu time (seconds)
unlimited
max user processes 256 pipe size (512 bytes)
8
open files 256 virtual memory (kbytes)
2105343}Swap: {
procs memory swap io
system cpu
r b w swpd free buff cache si so bi bo in
cs us sy id
0 0 0 40 9168 14632 56620 0 0 22 16 171
64 4 2 94
[From vmstat]}Disk Mounts: { /dev/hda10 on / type
ext2 (rw)
none on /proc type proc (rw) /dev/hda8 on /boot type
ext2 (rw)
/dev/hdc on /mnt/cdrom type iso9660 (ro) [From
mount]}Disk Free: {
Filesystem 1024-blocks Used Available Capacity
Mounted on
/dev/hda10 1112004 253147 801403 24% /
/dev/hda8 21927 596 20199 3%
/boot
/dev/hdc 397472 397472 0 100%
/mnt/cdrom [From df -k]
}Environment: { HISTFILESIZE=1000 HISTSIZE=1000
HOME=/home/oracle
HOSTNAME=localhost.localdomain HOSTTYPE=i386
LD_LIBRARY_PATH=/u01/app/oracle/product/8.0.5/lib
LOGNAME=oracle
MAIL=/var/spool/mail/oracle
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/8.0.5
ORACLE_SID=ORC1 ORACLE_TERM=386x
ORA_NLS33=US7ASCII OSTYPE=Linux
PATH=/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/u01/app/oracle/
product/8.0.5/bin:/bin:/usr/bin:/usr/local/bin
SHELL=/bin/sh SHLVL=2 TERM=linux TMPDIR=/var/tmp
USER=oracle _=/usr/bin/env}
System Tables: {}Semaphores: { ------ Shared Memory
Segments --------
key shmid owner perms bytes
nattch status
------ Semaphore Arrays --------
key semid owner perms nsems
status
------ Message Queues --------
key msqid owner perms used-bytes
messages
[From ipcs -sa] }Shared Mem: { ------ Shared
Memory Segments --------
key shmid owner perms bytes
nattch status
------ Semaphore Arrays --------
key semid owner perms nsems
status
------ Message Queues --------
key msqid owner perms used-bytes
messages
[From ipcs -ma] }/etc/oratab: {}Tracing: { } :
null

John -
You are missing some required Linux files. When you install
Linux, pick the 'everything' option, then weed out the obvious
things you don't want (like the Serbian How-To's, etc.)
I say this because I ran into the exact same thing this past
weekend after picking and choosing which packages to install for
Linux. After re-installing with the 'everything' option, the
Oracle install went swimmingly. I wish I could tell you which
package in particular you are missing, but I never figured that
out.
carl
John (guest) wrote:
: Hi, everyone:
: Oracle free installation support group points me here.
They
: said: "Unfortunately, the trial release of Oracle8 for Linux
is
: not supported by this group. You can obtain peer support on
the
: Oracle8 for Linux trialproduct from the discussion group on
the
: Oracle Technology Network (OTN)(http://technet.oracle.com). "
: Thanks in advacnce.
=================================================================
: ===
: SAVED PROBLEM REPORT:
=================================================================
: ===
: Thu Apr 8 20:28:10 EDT 1999 Platform: unixRelease:
: 8.0.5Product: rdbms_common
: Version: 8.0.5.0.0Area: (Installation) Install
: information:
: Installer Version: 4.0.3.0.0 Installer Script: [
: rdbms_common.ins 907 ]
: Install Action: Complete Software/Database Fresh
: Install
: Stage Home /mnt/cdrom Oracle_Base
: /u01/app/oracle (true)
: Oracle Home /u01/app/oracle/product/8.0.5
: Owner oracle
: Log
: /u01/app/oracle/product/8.0.5/orainst/install.log
: During installation of the above product the error below
: is encountered:
: Error during action 'Creating ntcontab.o'.Command: make -f
: /u01/app/oracle/product/8.0.5/network/lib/ins_network.mk
: ntcontab.o
: (if [ "compile" = "compile" ] ; then \
: /u01/app/oracle/product/8.0.5/bin/gennttab > ntcontab.c ;\
: cc -c ntcontab.c ;\ rm -f
: /u01/app/oracle/product/8.0.5/lib/ntcontab.o ;\
: mv ntcontab.o /u01/app/oracle/product/8.0.5/lib ; fi)
: /u01/app/oracle/product/8.0.5/bin/gennttab:
: /u01/app/oracle/product/8.0.5/bin/get_platform: No such file
: ordirectory
: ntcontab.c:7: sys/types.h: No such file or directory
: mv: ntcontab.o: No such file or directorymake: ***
[ntcontab.o]
: Error 1
=================================================================
: ===
=================================================================
: ===
: SAVED PROBLEM REPORT:
=================================================================
: ===
: Thu Apr 8 20:29:19 EDT 1999 Platform: unixRelease:
: 8.0.5Product: rdbms_common
: Version: 8.0.5.0.0Area: (Installation) Install
: information:
: Installer Version: 4.0.3.0.0 Installer Script: [
: rdbms_common.ins 907 ]
: Install Action: Complete Software/Database Fresh
: Install
: Stage Home /mnt/cdrom Oracle_Base
: /u01/app/oracle (true)
: Oracle Home /u01/app/oracle/product/8.0.5
: Owner oracle
: Log
: /u01/app/oracle/product/8.0.5/orainst/install.log
: During installation of the above product the error below
: is encountered:
: Error during action 'Creating ntcontab.o'.Command: make -f
: /u01/app/oracle/product/8.0.5/network/lib/ins_network.mk
: ntcontab.o
: (if [ "compile" = "compile" ] ; then \
: /u01/app/oracle/product/8.0.5/bin/gennttab > ntcontab.c ;\
: cc -c ntcontab.c ;\ rm -f
: /u01/app/oracle/product/8.0.5/lib/ntcontab.o ;\
: mv ntcontab.o /u01/app/oracle/product/8.0.5/lib ; fi)
: /u01/app/oracle/product/8.0.5/bin/gennttab:
: /u01/app/oracle/product/8.0.5/bin/get_platform: No such file
: ordirectory
: ntcontab.c:7: sys/types.h: No such file or directory
: mv: ntcontab.o: No such file or directorymake: ***
[ntcontab.o]
: Error 1
=================================================================
: ===
: LINUX ENVIRONMENTAL VIABLES DUMPED===========================
: Machine Environment:--------------------
: User: uid=502(oracle) gid=502(dba) groups=502(dba)
: Current Directory: /mnt/cdrom/orainstMachine: {
: Linux localhost.localdomain 2.0.36 #1 Tue Oct 13
: 22:17:11 EDT 1998i586 unknown
: [From uname -a] localhost.localdomain [From
: hostname]}Ulimit: {
: core file size (blocks) 1000000 data seg size
: (kbytes) unlimited
: file size (blocks) unlimited max memory size
: (kbytes) unlimited
: stack size (kbytes) 8192 cpu time (seconds)
: unlimited
: max user processes 256 pipe size (512 bytes)
: 8
: open files 256 virtual memory (kbytes)
: 2105343}Swap: {
: procs memory swap io
: system cpu
: r b w swpd free buff cache si so bi bo in
: cs us sy id
: 0 0 0 40 9168 14632 56620 0 0 22 16 171
: 64 4 2 94
: [From vmstat]}Disk Mounts: { /dev/hda10 on / type
: ext2 (rw)
: none on /proc type proc (rw) /dev/hda8 on /boot type
: ext2 (rw)
: /dev/hdc on /mnt/cdrom type iso9660 (ro) [From
: mount]}Disk Free: {
: Filesystem 1024-blocks Used Available Capacity
: Mounted on
: /dev/hda10 1112004 253147 801403 24% /
: /dev/hda8 21927 596 20199 3%
: /boot
: /dev/hdc 397472 397472 0 100%
: /mnt/cdrom [From df -k]
: }Environment: { HISTFILESIZE=1000 HISTSIZE=1000
: HOME=/home/oracle
: HOSTNAME=localhost.localdomain HOSTTYPE=i386
: LD_LIBRARY_PATH=/u01/app/oracle/product/8.0.5/lib
: LOGNAME=oracle
: MAIL=/var/spool/mail/oracle
: ORACLE_BASE=/u01/app/oracle
: ORACLE_HOME=/u01/app/oracle/product/8.0.5
: ORACLE_SID=ORC1 ORACLE_TERM=386x
: ORA_NLS33=US7ASCII OSTYPE=Linux
PATH=/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/u01/app/oracle/
: product/8.0.5/bin:/bin:/usr/bin:/usr/local/bin
: SHELL=/bin/sh SHLVL=2 TERM=linux TMPDIR=/var/tmp
: USER=oracle _=/usr/bin/env}
: System Tables: {}Semaphores: { ------ Shared
Memory
: Segments --------
: key shmid owner perms bytes
: nattch status
: ------ Semaphore Arrays --------
: key semid owner perms nsems
: status
: ------ Message Queues --------
: key msqid owner perms used-bytes
: messages
: [From ipcs -sa] }Shared Mem: { ------ Shared
: Memory Segments --------
: key shmid owner perms bytes
: nattch status
: ------ Semaphore Arrays --------
: key semid owner perms nsems
: status
: ------ Message Queues --------
: key msqid owner perms used-bytes
: messages
: [From ipcs -ma] }/etc/oratab: {}Tracing: { } :
null

[SOLVED]How to install this font : it doens't seem available for Linux

Hi everyone,
I'm currently running Gnome, and I'm trying to have the same theme than here : http://gnome-look.org/content/show.php/ … ent=108433. I've installed and used the Hydra theme : no problems with that.
The only thing I miss now is his font, I read the comments, and it's said the font used is "Zero Threes", they give a link (it's on page 2 if you want to check) : http://www.urbanfonts.com/fonts/Zero_Threes.htm
The problem is the font seems to be available on Mac and Windows, but I coulnd't find it for Linux. But the guy seem to have Linux and he's using it, so could somebody explain to me how can I get the font for linux ? Or if there is a way to install a Windows or a Mac font in Linux ?
Thanks you in advance !
Last edited by Dreepser (2009-08-29 11:53:00)

t4k1t wrote:The font is still only ttf so just download the win-version and copy the *.ttf file into your ~/.fonts directory.
Or, to make them available to all the users copy them to /usr/share/fonts/truetype directory.

Novell Client for Linux 2 beta & VMWare - bridged only?

OpenSUSE 11.1 with Novell Client for Linux 2.0 SP2 beta.
OpenSUSE is installed as a VMWare Workstation guest using NAT. When attempting to use contextless login, the Novell Client hangs. If you disable contextless login and then browse to the right context, you can login OK.
If you change the virtual NIC from NAT to Bridged, contextless login works fine. If at all possible, we need to use Bridged instead of NAT (long story).
Any idea what could be the problem? From what I can tell, SLP, DA, etc are set correctly, but I could be wrong.
Thanks.

Originally Posted by Thorsten Kampe
* mlazovjp (Mon, 14 Dec 2009 18:56:02 GMT)
> OpenSUSE 11.1 with Novell Client for Linux 2.0 SP2 beta.
>
> OpenSUSE is installed as a VMWare Workstation guest using NAT. When
> attempting to use contextless login, the Novell Client hangs. If you
> disable contextless login and then browse to the right context, you can
> login OK.
>
> If you change the virtual NIC from NAT to Bridged, contextless login
> works fine. If at all possible, we need to use Bridged instead of NAT
> (long story).
>
> Any idea what could be the problem? From what I can tell, SLP, DA, etc
> are set correctly, but I could be wrong.
Use NAT only if you need NAT - otherwise use bridged.
Thorsten
I was afraid that someone was goign to say something like that :)
We use port security hardware on our network, which will disable a port on the switch if it detects multiple MAC addresses on the same port. A virtual machine's bridged networking sets port security off and disables the port, so we have had to resort to NAT for all virtual machines. We can ask for exceptions to be made for a subset of our lab computers, but that is not an ideal solution.
Not only is that extra overhead for us to manage these exceptions, but we will not be able to realize our long-term goal of providing the virtual machine to our students to use on their personal notebooks since we cannot provide them port security exceptions.
I am still having problems grasping the reason that a contextless lookup (via LDAP, I assume) would misbehave while coming from a NATted connection but a bridged connection works fine on the exact same virtual machine. Shouldn't the communication between the VM and the LDAP server work properly either way??

In LabVIEW for Linux, cannot link to a shared library file (.so).

Hello all,
I'm having trouble using the Call Library Function Node within LabVIEW for Linux (using Ubuntu). I can configure my Node correctly, and it sees the available function within it with all the proper parameters, but when I close the Call Library Function dialog box it does a quick search and asks me to Find the Shared Library Named "mySharedLibraryName." If I select it again, it merely repeats this over and over until I cancel. Has anyone seen this before or know what is causing this? The .so file was compiled using gcc++ - is there anything specific that should have been included (does it need a header file)? Could some missing file be causing this?
Thanks,
Jason

The elf shared library format is a supported feature of all Linux distributions since about Linux 1.0 or earlier. So it is not really an issue that Ubuntu wouldn't support shared libraries as used by the LabVIEW Call Library Node. Since the Call Library Node seems to be able to see the exported functions during selection of the function it also doesn't seem to be a problem with proper export of the symbols.
This leaves over some dependencies of the shared library on some other shared libraries including C runtime libraries. Was the shared library compiled on the system you try to use it? If not you may have an incompatibility of the C runtime library version used on the system that was used to compile the shared library and your Ubuntu system you try to load it.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

LabVIEW 8.0.1 Update for Linux

Hello,
I just downloaded the update for LabVIEW for Linux an tried to install like it is described.
The following output occurs:
Installing...
/bin/sh: /soft/natinst/lv801-update/bin/INSTALL.norpm: No such file or directory
/bin/sh: /soft/natinst/lv801-update/bin/INSTALL.norpm: No such file or directory
/bin/sh: /soft/natinst/lv801-update/bin/INSTALL.norpm: No such file or directory
/bin/sh: /soft/natinst/lv801-update/bin/INSTALL.norpm: No such file or directory
Would you like to install NI Example Finder (LabVIEW 8.0.1)? [Ynq]
/bin/sh: /soft/natinst/lv801-update/bin/INSTALL.norpm: No such file or directory
/bin/sh: /soft/natinst/lv801-update/bin/INSTALL.norpm: No such file or directory
LabVIEW package installation complete.
Launching LabVIEW Mass Compile utility.
When I start LabVIEW after the obviously successfull Mass Compile I still see LabVIEW Version 8 (in contrast to Windows where I get 8.0.1).
Is it possible that the file bin/INSTALL.norpm is missing in the tar archive or that something else is broken? I am running Debian GNU/Linux Sarge.
Thanks in advance,
Armin Herzer

hello armin herzer,
did you download the LabVIEW 8.0.1 update and the "lv801-linux-norpm.tar.gz"?
if not, you can get it here lv801-linux-norpm.tar.gz.
regards,
robert h
NI germany

LaCie LightScribe Labeler for Linux released Oct 17th.

Some of us are missing LightScribe capabilities on Arch Linux.
Now "4L" comes as an RPM free (as in beer) & ready for Linux
The news is there : http://www.k3b.org/ (LaCie is a k3b support)
Press release : http://www.lacie.com/company/news/news.htm?id=10293
Download page : http://www.lacie.com/products/product.htm?pid=10803
I've never used rpm under Arch and will seek knowledge on rpm2cpio AUR package.
Anybody's willing to get on this ?

Use rpmextract to extract the files from the rpm. Then, it's just a question of installing the files in the correct place (in $startdir/pkg), i.e. binaries in /usr/bin, libraries in /usr/lib, etc.

Schedule for Java ME SDK 3.0 for Linux?

Hi,
thank you for Java ME, we are using it since many years with on Linux development platform.
Currently we plan to use the Sensor API, which is missing in WTK2.5.2 for Linux.
What are the current plans for Linux?
thanks,
Marcel

Another +1
Come on Oracle, get it together. And why are you being so evasive about answering the OP's question? Is there a release schedule for Linux or not? For some reason I suspect not and you're desperately trying to avoid saying so.
If there's no J2ME for linux there's no point me trying to write Java mobile apps any more. I suspect I will not be the only person to switch to writing Android apps instead. Google seem to understand and respect their Linux programmers.

Context for linux missing

Similar Messages

Maybe you are looking for