Context Migration from FWSM to ASA
Hi there ,
What would be best way to migrate a Context from FWSM to ASA (non SM) with minimal down time & effort .
I am thinking of these steps :
1) Preconfigure the new ASA with the same IP-Address as FWSM for the interfaces (keep the ASA subinterfaces in shut state ) , configure Access rules .
( Want to retain same ip for the interfaces , since there are many hosts behind the FWSM with this gateway IP configured )
2) Shut the context specific interfaces on FWSM & bring up the Context specific interfaces on the ASA.
( Also a query - If I introduce ASA into the Network with the same IP as of FWSM , though the interfaces would be in shut state , should i expect any IP Conflicts )
Thanks
Hi,
Well you probably have the option to configure the old FWSMs interface MAC address to the ASAs corresponding interface manually, this way there will be no change in the ARP from the perspective of the server/host.
I guess depending on if you have a single firewall or failover firewall the command is a bit different as you define either 1 or 2 MAC addresses.
I think this was the command to modify the MAC address
http://www.cisco.com/en/US/docs/security/asa/command-reference/m1.html#wp2111205
- Jouni
Similar Messages
-
Migrating from FWSM to ASA Service Module (ASASM)
I'm migrating from a failover pair of FWSM modules across to a failover pair of ASA Service Modules. In order to avoid a "big bang" switchover I intend to migrate subnets from one to the other over a protracted period.
With that in mind, can anyone confirm whether there is any restriction on having FWSM and ASASM modules in the same chassis? A trawl of the relevant documentation hasn't revealed anything.
In this specific case it is Catalyst 6509E VSS chassis pairs with Sup-2T.
Thanks in advance.So long as the chassis has enough power to power these modules you are good.
Upto 4 FWSMs can be installed in a chassis.
Upto 4 ASA-SM modules can be installed in a chassis.
FWSM:
http://www.cisco.com/en/US/prod/collateral/modules/ps2706/ps4452/product_data_sheet0900aecd803e69c3.html
• Up to 4 FWSMs (20 Gbps) per Catalyst 6500 chassis
ASA-SM
http://www.cisco.com/en/US/prod/collateral/modules/ps2706/ps11621/qa_c67-662207.html
Q. How many ASA Services Modules can I place in a Cisco Catalyst 6500 Series chassis?
A. Up to four independent ASA Services Modules can simultaneously run in a Cisco Catalyst 6500-E Series chassis.
-Kureli
Checkout my breakout session at Cisco Live 2013, Orlando, Florida.
BRKSEC-2024 Deploying Next-Generation Firewall Services on the ASA
Room 314A Tuesday, June 25 3:00 PM - 4:30 PM -
Upgrade from FWSM to ASA 5555Xs
Hello,
We would like to decommision our FWSMs and upgrade to the ASA 5555Xs. This leads me to ask the following: What would be the most efficient way of doing this without any interruption to production? Has anyone successfully acomplished this? If you have please share your experiences and caveats involved in this project.
Thanks!There will be some downtime.
1. You can configure the 5555s ahead of time off line as a failover pair with the same config as in the FWSM pair.
2. On the day of cut over. Power down the FWSMs and plug the ASAs into the network.
3. If the config is the same and same IP address is used on the ASAs then, clear the ARP cache on all adjacent L3 devices.
4. Test connectivity.
There will be slight downtime which cannot be avoided. This cannot be hitless when are you are switching platforms.
-Kureli
Checkout my breakout session at Cisco Live 2013, Orlando, Florida.
BRKSEC-2024 Deploying Next-Generation Firewall Services on the ASA
Room 314A Tuesday, June 25 3:00 PM - 4:30 PM -
Migration cisco concentrator to ASA
Hi,
we want to migrate from concentrator to ASA.
I know that there was a cisco internal tool to adapt the concentrator configuration.
Is this tool still internal or could it be downloaded somewhere?
Thanks for your help.Hi Martin,
What version of Concentrator are you currently using? If you are using a VPNC 3000 series, you can view the recommended upgrade path to an ASA via the following link (see "Product Migration Options" at the bottom of the document)
http://www.cisco.com/en/US/partner/prod/collateral/vpndevc/ps5743/ps5749/ps2284/prod_end-of-life_notice0900aecd805cd5a0.html
Mike -
Migration from 9i to 11g Transparent Gateway results in a) ORA-12704: character set mismatch b) ORA-02070: database ... does not support SYS_OP_C2C in this context
What Transparent Gateway (TG) 11g configuration steps prevent the following errors?:
a) ORA-12704: character set mismatch
b) ORA-02070: database <DB_link_name> does not support SYS_OP_C2C in this context
Hints:
The current 9i TG works with the existing views and packages. These same db objects will not compile using the new 11g TG.
The db objects are on an Oracle 10g database linked to an SQL Server 2008 R2 database.
Since the 9i TG works I assume a configuration to the 11g TG will get it working same as before. But what...
Is is something controlled by these parameters? (Sorry, I don't know how this stuff works. I'm the application developer. My DBAs setup the Transparent Gateways.):
Parameters in the Gateway Startup Shell script:
ORA_NLS33
NLS_LANG
Parameters in the initsid.ora file:
HS_LANGUAGE
HS_NLS_DATE_FORMAT
HS_NLS_DATE_LANGUAGE
I'm avoiding the known workaround to refactor the VIEWS and PACKAGES to contain CAST() statements to explicitly match the data types. A server side fix to the 11g TG is preferred.
Sample code:
a) ORA-12704: character set mismatch
... is caused by SQL that works with my 9i TG but not with my 11g TG. It's a snippit from my view that won't compile:
select status_code -- Oracle VARCHAR2(30)
from ora_app_interfaces
UNION
select "StatusCode" as status_code -- SQL Server NVARCHAR(30)
from SqlAppInterfaces
Example workaround that I'm avoiding:
select status_code
from ora_app_interfaces
UNION
select CAST("StatusCode" as VARCHAR(30)) as status_code
from SqlAppInterfaces
b) ORA-02070: database <DB_link_name> does not support SYS_OP_C2C in this context
A line of code in the procedure that compiles correctly but fails to execute:
-- Insert into SQL Server from Oracle
insert into PatientMedRecNum (
"PatID", -- SQL Server INT
"MedRecNum", -- SQL Server NVARCHAR(11)
"Hospital") -- SQL Server NVARCHAR(30)
values (
pi_pat_id, -- Oracle NUMBER
pi_med_rec_num, -- Oracle VARCHAR2
pi_hospital); -- Oracle VARCHAR2
I'd guess the errors are caused by the TG's implicit conversion between the Oracle VARCHAR2 and the SQL Server NVARCHAR... but this works fine on the 9i TG... how do I set it up to work on the 11g TG?
Thanks!Trace of 11g TG... generating errors due to lack of automatic mapping from SQL NVARCHAR to Oracle NVARCHAR, where the previous 9g TG mapped from SQL NVARCHAR to Oracle VARCHAR2.
Oracle Corporation --- MONDAY SEP 22 2014 13:35:08.186
Heterogeneous Agent Release
11.2.0.4.0
Oracle Corporation --- MONDAY SEP 22 2014 13:35:08.186
Version 11.2.0.4.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "DEBUG"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
setting HS_FDS_RECOVERY_PWD to default value
setting HS_FDS_TRANSACTION_LOG to default of HS_TRANSACTION_LOG
setting HS_IDLE_TIMEOUT to default of 0
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "UCS2"
setting HS_FDS_TIMESTAMP_MAPPING to default of "DATE"
setting HS_FDS_DATE_MAPPING to default of "DATE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_RSET_RETURN_ROWCOUNT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "FALSE"
setting HS_FDS_SUPPORT_STATISTICS to default of "TRUE"
setting HS_FDS_QUOTE_IDENTIFIER to default of "TRUE"
setting HS_KEEP_REMOTE_COLUMN_SIZE to default of "OFF"
setting HS_FDS_GRAPHIC_TO_MBCS to default of "FALSE"
setting HS_FDS_MBCS_TO_GRAPHIC to default of "FALSE"
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics;gtw$:SQLGetInfo"
setting HS_FDS_DELAYED_OPEN to default of "TRUE"
setting HS_FDS_WORKAROUNDS to default of "0"
setting HS_FDS_ARRAY_EXEC to default of "TRUE"
Exiting hgosdip, rc=0
ORACLE_SID is "xxxDEV"
Product-Info:
Port Rls/Upd:4/0 PrdStat:0
Agent:Oracle Database Gateway for MSSQL
Facility:hsa
Class:MSSQL, ClassVsn:11.2.0.4.0_0019, Instance:xxxDEV
Exiting hgogprd, rc=0
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=1000
HOCXU_DB_CSET=178
HS_LANGUAGE not specified
rc=1239980 attempting to get LANG environment variable.
HOCXU_SEM_VER=102000
Entered hgolofn at 2014/09/22-13:35:08
RC=-1 from HOSGIP for "PATH"
Setting PATH to "C:\oracle\product\11.2.0\tg_2\dg4msql\driver\lib"
Exiting hgolofn, rc=0 at 2014/09/22-13:35:08
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
treat_SQLLEN_as_compiled = 1
Exiting hgoinit, rc=0 at 2014/09/22-13:35:08
Entered hgolgon at 2014/09/22-13:35:08
reco:0, name:abaccess, tflag:0
Entered hgosuec at 2014/09/22-13:35:08
uencoding=UTF16
Entered shgosuec at 2014/09/22-13:35:08
Exiting shgosuec, rc=0 at 2014/09/22-13:35:08
shgosuec() returned rc=0
Exiting hgosuec, rc=0 at 2014/09/22-13:35:08
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
HOSGIP for "HS_FDS_DEFAULT_OWNER" returned "dbo"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2014/09/22-13:35:08
HS_FDS_CONNECT_INFO = "sqlserverxxx/sqlinstancexxx/SQL_Server_2008_xxx_DEV"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2014/09/22-13:35:08
dsn: sqlserverxxx/sqlinstancexxx/SQL_Server_2008_xxx_DEV, name:xxx_admin
optn:
Entered hgocip at 2014/09/22-13:35:08
dsn:sqlserverxxx/sqlinstancexxx/SQL_Server_2008_xxx_DEV
Exiting hgocip, rc=0 at 2014/09/22-13:35:08
Entered shgogohn at 2014/09/22-13:35:08
ohn is 'OraGtw11g_home2'
Exiting shgogohn, rc=0 at 2014/09/22-13:35:08
RC=-1 from HOSGIP for "HS_FDS_ENCRYPT_SESSION"
using 0 as default value for "HS_FDS_ENCRYPT_SESSION"
RC=-1 from HOSGIP for "HS_FDS_VALIDATE_SERVER_CERT"
using 1 as default value for "HS_FDS_VALIDATE_SERVER_CERT"
Entered hgocont_OracleCsidToIANA at 2014/09/22-13:35:08
Returning 2252
Exiting hgocont_OracleCsidToIANA at 2014/09/22-13:35:08
Exiting hgogenconstr, rc=0 at 2014/09/22-13:35:08
Entered hgopoer at 2014/09/22-13:35:08
hgopoer, line 231: got native error 5701 and sqlstate 01000; message follows...
[Oracle][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Changed database context to 'Xxx_XXX_DEV'. {01000,NativeErr = 5701}[Oracle][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Changed language setting to us_english. {01000,NativeErr = 5703}
Exiting hgopoer, rc=0 at 2014/09/22-13:35:08
hgocont, line 2764: calling SqlDriverConnect got sqlstate 01000
Entered hgolosf at 2014/09/22-13:35:08
Exiting hgolosf, rc=0 at 2014/09/22-13:35:08
DriverName:HGmsss23.dll, DriverVer:07.01.0093 (B0098, U0065)
DBMS Name:Microsoft SQL Server, DBMS Version:10.00.2531
Exiting hgocont, rc=0 at 2014/09/22-13:35:08 with error ptr FILE:hgocont.c LINE:2764 ID:SQLDriverConnect
SQLGetInfo returns Y for SQL_CATALOG_NAME
SQLGetInfo returns 128 for SQL_MAX_CATALOG_NAME_LEN
Exiting hgolgon, rc=0 at 2014/09/22-13:35:08
Entered hgoulcp at 2014/09/22-13:35:08
Entered hgowlst at 2014/09/22-13:35:08
Exiting hgowlst, rc=1 at 2014/09/22-13:35:08
SQLGetInfo returns Y for SQL_PROCEDURES
SQLGetInfo returns 0x1f for SQL_OWNER_USAGE
TXN Capable:2, Isolation Option:0xf
SQLGetInfo returns 128 for SQL_MAX_SCHEMA_NAME_LEN
SQLGetInfo returns 128 for SQL_MAX_TABLE_NAME_LEN
SQLGetInfo returns 134 for SQL_MAX_PROCEDURE_NAME_LEN
HOSGIP returned value of "TRUE" for HS_FDS_QUOTE_IDENTIFIER
SQLGetInfo returns " (0x22) for SQL_IDENTIFIER_QUOTE_CHAR
13 instance capabilities will be uploaded
capno:1992, context:0x0001ffff, add-info: 0
capno:3042, context:0x00000000, add-info: 0, translation:"42"
capno:3047, context:0x00000000, add-info: 0, translation:"57"
capno:3049, context:0x00000000, add-info: 0, translation:"59"
capno:3050, context:0x00000000, add-info: 0, translation:"60"
capno:3066, context:0x00000000, add-info: 0
capno:3067, context:0x00000000, add-info: 0
capno:3068, context:0x00000000, add-info: 0
capno:3069, context:0x00000000, add-info: 0
capno:3500, context:0x00000001, add-info: 91, translation:"42"
capno:3501, context:0x00000001, add-info: 93, translation:"57"
capno:3502, context:0x00000001, add-info: 107, translation:"59"
capno:3503, context:0x00000001, add-info: 110, translation:"60"
Exiting hgoulcp, rc=0 at 2014/09/22-13:35:08
Entered hgouldt at 2014/09/22-13:35:08
NO instance DD translations were uploaded
Exiting hgouldt, rc=0 at 2014/09/22-13:35:08
Entered hgobegn at 2014/09/22-13:35:08
tflag:0 , initial:1
hoi:0x12ee18, ttid (len 32) is ...
xxx
xxx
tbid (len 10) is ...
0: 09000F00 0FAC1E00 010A [..........]
Exiting hgobegn, rc=0 at 2014/09/22-13:35:08
Entered hgodtab at 2014/09/22-13:35:08
count:1
table: XXX_INTERFACE
Allocate hoada[0] @ 0000000005F58270
Entered hgopcda at 2014/09/22-13:35:08
Column:1(InterfaceID): dtype:2 (NUMERIC), prc/scl:20/0, nullbl:0, octet:0, sign:1, radix:10
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:2(TableName): dtype:-9 (WVARCHAR), prc/scl:30/0, nullbl:0, octet:60, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:3(TableID): dtype:4 (INTEGER), prc/scl:10/0, nullbl:0, octet:0, sign:1, radix:10
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:4(StatusCode): dtype:-9 (WVARCHAR), prc/scl:30/0, nullbl:0, octet:60, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:5(StatusTimestamp): dtype:93 (TIMESTAMP), prc/scl:23/3, nullbl:0, octet:0, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:6(InterfaceLog): dtype:-9 (WVARCHAR), prc/scl:400/0, nullbl:1, octet:800, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
The hoada for table XXX_INTERFACE follows...
hgodtab, line 1073: Printing hoada @ 0000000005F58270
MAX:6, ACTUAL:6, BRC:1, WHT=6 (TABLE_DESCRIBE)
hoadaMOD bit-values found (0x40:TREAT_AS_NCHAR,0x400:UNICODE_COLUMN)
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
3 DECIMAL N 22 22 20/ 0 0 0 0 InterfaceID
12 VARCHAR N 60 60 128/ 30 1000 0 440 TableName
4 INTEGER N 4 4 0/ 0 0 0 0 TableID
12 VARCHAR N 60 60 128/ 30 1000 0 440 StatusCode
91 DATE N 16 16 0/ 0 0 0 0 StatusTimestamp
12 VARCHAR Y 800 800 129/144 1000 0 440 InterfaceLog
Exiting hgodtab, rc=0 at 2014/09/22-13:35:08
Entered hgodafr, cursor id 0 at 2014/09/22-13:35:08
Free hoada @ 0000000005F58270
Exiting hgodafr, rc=0 at 2014/09/22-13:35:08
Entered hgotcis at 2014/09/22-13:35:08
Calling SQLStatistics for XXX_INTERFACE
IndexType=SQL_TABLE_STAT: cardinality=0
IndexType=1: PK_XXX_Interface
IndexType=3: IX_TableID
IndexType=3: IX_TableName
Calling SQLColumns for dbo.SQL_app_INTERFACE
#1 Column "InterfaceID": dtype=2, colsize=20, decdig=0, char_octet_length=0, cumulative avg row len=15
#2 Column "TableName": dtype=-9, colsize=30, decdig=0, char_octet_length=60, cumulative avg row len=60
#3 Column "TableID": dtype=4, colsize=10, decdig=0, char_octet_length=0, cumulative avg row len=64
#4 Column "StatusCode": dtype=-9, colsize=30, decdig=0, char_octet_length=60, cumulative avg row len=109
#5 Column "StatusTimestamp": dtype=93, colsize=23, decdig=3, char_octet_length=0, cumulative avg row len=125
#6 Column "InterfaceLog": dtype=-9, colsize=400, decdig=0, char_octet_length=800, cumulative avg row len=725
3 Index(es) found:
Index: PK_XXX_Interface, type=1, ASCENDING, UNIQUE, cardinality=0
#1 Column 1: InterfaceID
Index: IX_TableID, type=3, ASCENDING, NON-UNIQUE, cardinality=0
#1 Column 3: TableID
Index: IX_TableName, type=3, ASCENDING, NON-UNIQUE, cardinality=0
#1 Column 2: TableName
Exiting hgotcis, rc=0 at 2014/09/22-13:35:08 -
Dear Apple Support Community.
As mentioned by a number of users reporting the same problem, my 2009 iMac CPU3.06 GHz Intel Core 2 Duo, 8GB RAM, has become extremely slow and repeatedly "out of Memory" since it was migrated from Mountain Lion to Mavericks (OS 10.9 then OS 10.9.1).
I have already run CleanMyMac, deleted 5GB of useless stuffs, which did not translate into any improvement. Following the advices collected in other Apple Support Community threads, I have applied EtreCheck the outcome of which is provided below.
For information, I have also upgraded my 2011 MacBook CPU2.3 GHz Core i7, 8GB which became only a bit slower than before, sometimes freezing which it almost never did before. However, I am used to the fact that Mac get usually slower and more prompt fo freeze after upgrading to a more recent OS.
Both my 2009 iMac and my 2011 MacBook have F-Secure installed. So the problem with the 2009 IMac is unlikly to be due to the presence of F-Secure. Interestingly, the few abnormalities found by Etrecheck were exacly identical before I ran CleanMyMac. There are two more findings (mentioned below) since I ran CleanMyMac on the 2009 iMac, which again didn't improve the problem.
So please find below the details of the EtreCheck experience and some additional measurements made with iStat while running EtreCheck:
Hardware Information:
iMac (24-inch, Early 2009)
iMac - model: iMac9,1
1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information:
ATI Radeon HD 4850 - VRAM: 512 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 2:40:57
Disk Information:
WDC WD1001FALS-40K1B0 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
XooS5 HD (disk0s2) /: 999.35 GB (189.85 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5670S
USB Information:
Apple Inc. Built-in iSight
Canon CanoScan
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
WD My Passport 071D 800mbit - 800mbit max
EFI (disk1s1) <not mounted>: 209.7 MB
disk1s2 (disk1s2) <not mounted>: 2 TB
Boot OS X (disk1s3) <not mounted>: 134.2 MB
Thunderbolt Information:
Kernel Extensions:
com.f-secure.kext.fsauth (1.0.0d1)
Problem System Launch Daemons:
[failed] com.apple.wdhelper.plist [REMARK: this abnormality appeared only after running CleanMyMac. It does not appear on my 2011 MacBook]
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[invalid] com.bjango.istatlocaldaemon.plist [REMARK: this abnormality pre-existed to running CleanMyMac. It appears also on my 2011 MacBook]
[loaded] com.f-secure.fsavd.dbhelper.plist
[loaded] com.f-secure.fsavd.plist
[loaded] com.f-secure.fsmac.firewall.plist
[loaded] com.f-secure.fsmac.fsupdated_guts2.plist
[loaded] com.f-secure.fsmac.licensetool.plist
[loaded] com.macpaw.CleanMyMac2.Agent.plist
Launch Agents:
[loaded] com.babylon.activation.plist
[loaded] com.bjango.istatlocal.plist
[loaded] com.f-secure.relauncher.plist
[loaded] com.f-secure.trasher.plist
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist
[loaded] com.google.keystone.agent.plist
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist
User Login Items:
iTunesHelper
Dropbox
F-Secure Anti-Virus for MAC
3rd Party Preference Panes:
Flash Player
Internet Plug-ins::
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6
AdobePDFViewer: Version: 11.0.04 - SDK 10.6
DivXBrowserPlugin: Version: 2.1
Flash Player: Version: 11.9.900.170 - SDK 10.6
OfficeLiveBrowserPlugin: Version: 12.2.8
Google Earth Web Plug-in: Version: 6.1
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
User Internet Plug-ins::
Picasa: Version: 1.0
Bad Fonts:
None
Old applications:
None
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
XooS5 HD: Disk size: 930.71 GB Disk used: 753.90 GB
Destinations:
XooS5 TM [Local] (Last used)
Total size: 2
Total number of backups: 32
Oldest backup: 2013-09-15 01:11:39 +0000
Last backup: 2013-12-07 12:48:45 +0000
Size of backup disk: Too small. Backup size 2 < (Disk used 753.90 GB X 3)
Time Machine details may not be accurate. All volumes being backed up may not be listed.
REMARK: The above finding is unlikely to be accurate. In fact, my Time Machine is supported by a 2TB WD My Passport Studio external HD connected with a Firewire 800. As mentionned, only 754GB of the 2000GB are used.
Top Processes by CPU:
5% backupd
5% Mail
5% WindowServer
3% Finder
3% Dropbox
Top Processes by Memory:
1.60 GB mds_stores REMARK: this item was marked in red in the outcome of EtreCheck, so I assume there is something wrong there
82 MB Finder
74 MB Mail
49 MB softwareupdated
49 MB Dropbox
Virtual Memory Statistics:
97 MB Free RAM
1.21 GB Active RAM
1.19 GB Inactive RAM
1.21 GB Wired RAM
1.83 GB Page-ins
36 MB Page-outs
Please find now some additional measurements collected with iStat while running EtreCheck:
Practically:
The iMac can work slowly with only one software e.g. either Mail or Safari or Firefox, but still the below "out of Memory" message occurs about every 3 minutes.
Aperture has becomre to slow to be useable
If trying to write a mail (with Mail) while Safari or Firefox is open, then the "out of Memory" message occurs about every 20 seconds so I need to check on "Resume" several times per minute.
Conclusions
From the above, unless anyone in the Apple Support Community proves to be able to identify a specific problem leading to a way to find a cure, I tend to conclude that Mavericks is not suitable for computers operating with a Core 2 Duo CPU even with a 8GB of RAM.
Unless I missed something, I did not see any warning from Apple Computer Inc. informing their customers they should refrain from upgrading Core 2 Duo Computers.
The only solution I see so far is to downgrade from Mavericks to Mountain Lion. And the Apple Support Community would confirm that it is the only solution, I would appreciate to get your guidance on how to proceed.
Intended action plan
Migrate the above 2009 iMac to a 2014 Mac Mini Server operating on Mavericks to ensure that no data may be lost while downgrading to Montain Lion.
Provided the above downgrading operation is successful, assign this 2009 iMac to partial retirement e.g. Mail, Skype, iTunes and DVD player.
In advance, I would like to thank the Apple Community for helping me either i) finding a cure to the problem, ii) or confirming that Mavericks cannot operate properly on Core 2 Duo computers, iii) and in such a case, guiding me on how to downgrade to Mountain Lion.
Yours sincerely
Core... what anti-virus would you recommend using?
Use what is already included with OS X. It already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple.
A much better question is "how should I protect my Mac":
Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
Don’t install Java unless you are certain that you need it:
Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
Disable Java in Safari > Preferences > Security.
Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind. -
ZCC Login failed after Migration from 11.3.1 FRU1 to 11.3.2
Hey,
System: 6 Primary Server Sless 11 SP3
LDAP: EDIR
Primary: 11.3.2
Sats: 11.3.1 FRU1
After Migration from 11.3.1 FRU1 to 11.3.2
i'll try to login in ZCC
Message ZCC
Error: Login Error: com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
See the ZENworks Control Center log file (zcc.log) for the full stack trace.
I tryed with default admin and see that the USERSource is not reachable.
I take a look in the configuration / usersource and there is an Error like: Unable to read contexts. One or more of your connections don't support non-SSL.
ZCC.log sayed
[javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints] [] [com.novell.zenworks.datamodel.exceptions.InternalD ataModelException] [ZENServer]
[DEBUG] [12/30/2014 09:54:02.417] [3547] [ZENServer] [72] [zenworks] [ZCC] [] [Form.java CSRF TOKEN:d1b804076c63e7393af1a72442ced4b5 for the PageId:authoritativeSourceDetails] [] [] [] [ZENServer]
[DEBUG] [12/30/2014 09:54:03.144] [3547] [ZENServer] [85] [zenworks] [ZCC] [] [QuickTask build tasks called in createChildControls, normal flow before ajax] [] [] [] [ZENServer]
[DEBUG] [12/30/2014 09:54:03.348] [3547] [ZENServer] [69] [zenworks] [ZCC] [] [com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at com.novell.zenworks.datamodel.services.Certificate ManagerImpl.getCertificates(CertificateManagerImpl .java:179)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. validateCertificateExpiry(LDAPUtil.java:1162)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:774)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:559)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:386)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:359)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:325)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:311)
at com.novell.zenworks.core.web.internal.UserSourceSt atusAJAX.getImageData(UserSourceStatusAJAX.java:77 )
at com.novell.web.ajax.ImageAJAX.service(ImageAJAX.ja va:38)
at com.novell.web.ajax.AJAXDataHandler.service(AJAXDa taHandler.java:40)
at com.novell.web.AjaxServlet.serviceImpl(AjaxServlet .java:100)
at com.novell.web.AjaxServlet.service(AjaxServlet.jav a:74)
at com.novell.zenworks.fw.web.internal.ZENworksAjaxSe rvlet.service(ZENworksAjaxServlet.java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet .java:727)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:208)
at com.patchlink.sapphire.web.pages.vulnerability.ses sion.HibernateSessionFilter.doFilter(HibernateSess ionFilter.java:75)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:241)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:208)
at org.apache.catalina.core.StandardWrapperValve.invo ke(StandardWrapperValve.java:220)
at org.apache.catalina.core.StandardContextValve.invo ke(StandardContextValve.java:122)
at org.apache.catalina.authenticator.AuthenticatorBas e.invoke(AuthenticatorBase.java:501)
at org.apache.catalina.core.StandardHostValve.invoke( StandardHostValve.java:171)
at com.googlecode.psiprobe.Tomcat70AgentValve.invoke( Tomcat70AgentValve.java:39)
at org.apache.catalina.valves.ErrorReportValve.invoke (ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invok e(StandardEngineValve.java:116)
at com.novell.zenworks.tomcat.ZENRequestValve.invoke( ZENRequestValve.java:1346)
at org.apache.catalina.connector.CoyoteAdapter.servic e(CoyoteAdapter.java:408)
at org.apache.coyote.http11.AbstractHttp11Processor.p rocess(AbstractHttp11Processor.java:1070)
at org.apache.coyote.AbstractProtocol$AbstractConnect ionHandler.process(AbstractProtocol.java:611)
at org.apache.tomcat.util.net.JIoEndpoint$SocketProce ssor.run(JIoEndpoint.java:316)
at java.util.concurrent.ThreadPoolExecutor.runWorker( ThreadPoolExecutor.java:1145)
at java.util.concurrent.ThreadPoolExecutor$Worker.run (ThreadPoolExecutor.java:615)
at org.apache.tomcat.util.threads.TaskThread$Wrapping Runnable.run(TaskThread.java:61)
at java.lang.Thread.run(Thread.java:745)
Caused by: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at sun.security.ssl.Alerts.getSSLException(Alerts.jav a:192)
at sun.security.ssl.SSLSocketImpl.fatal(SSLSocketImpl .java:1884)
at sun.security.ssl.Handshaker.fatalSE(Handshaker.jav a:276)
at sun.security.ssl.Handshaker.fatalSE(Handshaker.jav a:270)
at sun.security.ssl.ClientHandshaker.serverCertificat e(ClientHandshaker.java:1439)
at sun.security.ssl.ClientHandshaker.processMessage(C lientHandshaker.java:209)
at sun.security.ssl.Handshaker.processLoop(Handshaker .java:878)
at sun.security.ssl.Handshaker.process_record(Handsha ker.java:814)
at sun.security.ssl.SSLSocketImpl.readRecord(SSLSocke tImpl.java:1016)
at sun.security.ssl.SSLSocketImpl.performInitialHands hake(SSLSocketImpl.java:1312)
at sun.security.ssl.SSLSocketImpl.startHandshake(SSLS ocketImpl.java:1339)
at sun.security.ssl.SSLSocketImpl.startHandshake(SSLS ocketImpl.java:1323)
at com.novell.zenworks.security.certificates.Certific ateUtility.getCertChain(CertificateUtility.java:12 1)
at com.novell.zenworks.datamodel.services.Certificate ManagerImpl.getCertificates(CertificateManagerImpl .java:175)
... 35 more
Caused by: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at sun.security.ssl.AbstractTrustManagerWrapper.check AlgorithmConstraints(SSLContextImpl.java:946)
at sun.security.ssl.AbstractTrustManagerWrapper.check AdditionalTrust(SSLContextImpl.java:872)
at sun.security.ssl.AbstractTrustManagerWrapper.check ServerTrusted(SSLContextImpl.java:814)
at sun.security.ssl.ClientHandshaker.serverCertificat e(ClientHandshaker.java:1421)
SR has been created.
Any Tipps /Hints for me ?
Thank YouOriginally Posted by robpet
Should have said kind of the same problem...
That was sort of my gut feelings so I checked our certificates beforehand and they are using certs with sha1 fingerprint. But we are not using SSL - our connections are made using port 389. And the communication status is green.
But I cannot add SSL because it complains about "unable to obtain a valid certificate for SSL communication information. Please verify that the adress and port are correct and that the LDAP directory has been configured with a valid certificate.
So I cannot understand why users cannot authenticate with zenagent.
There's a TID about zcc login failures after 11.3 upgrade.
https://www.novell.com/support/kb/doc.php?id=7014716
We ran into the above. -
JCOM with Weblogic6.1(migrating from weblogic 6.0)
Hello,
We are currently running our application on Weblogic 6.0. Also we have a VB client
which talks to Enity beans deployed in the Weblogic server, via JINTEGRA(jintegra.jar)
Now, we are planning to migrate from Weblogic 6.0 to Weblogic 6.1. In this context,
I have following questions,
1] Can I use JCOM for my requirement(talking to EJB's from VB client)
2] Is JCOM shipped along with Weblogic 6.1, if so is it shipped as a separate
jar file or as part of weblogic.jar
3] With Weblogic 6.1, do I have to still install Jintegra.jar for accessing my
beans from VB or does JCOM solve the purpose ?
Would really appreciate if you could share your thoughts
reg
nileshHello,
We are currently running our application on Weblogic 6.0. Also we have a VB client
which talks to Enity beans deployed in the Weblogic server, via JINTEGRA(jintegra.jar)
Now, we are planning to migrate from Weblogic 6.0 to Weblogic 6.1. In this context,
I have following questions,
1] Can I use JCOM for my requirement(talking to EJB's from VB client)
2] Is JCOM shipped along with Weblogic 6.1, if so is it shipped as a separate
jar file or as part of weblogic.jar
3] With Weblogic 6.1, do I have to still install Jintegra.jar for accessing my
beans from VB or does JCOM solve the purpose ?
Would really appreciate if you could share your thoughts
reg
nilesh -
About migrating from 10.1.2 to 10.1.3 (page events)
Hi forum,
As authentication based on public key certificates only works under jdev 10.1.3.1, I'm upgrading my 10.1.2 application to that version. I'm following the Oracle document "Converting to the ADF Page Lifecycle from 10.1.2" (http://www.oracle.com/webapps/online-help/jdeveloper/10.1.3?topic=adf_convertingfrom10_1_2_html) that it's a really great help. However, this document doesn't explain how to migrate page events. In UIX, a submitButton may have an "event" attribute that fires the method called onEventName in the DataPage class. In ADF Faces, I don't know how to do that. The document previously mentioned doesn't say anything about this topic. The solution I've tryed is the following:
As document "API Changes from ADF UIX" (http://www.oracle.com/technology/products/jdev/htdocs/partners/addins/exchange/jsf/doc/api-changes.html) explains, submitButton turns into commandButton and event attribute is replaced by an actionlistener. So, in my jspx page:
<af:commandButton id="myButton" text="Search" actionListener="#{pageCode.listen}"/>
<af:commandButton id="myOtherButton" text="All" actionListener="#{pageCode.listen}" />
In faces-config.xml:
<managed-bean>
<managed-bean-name>pageCode</managed-bean-name>
<managed-bean-class>com.mycompany.web.struts.actions.MyPageController</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
</managed-bean>
In controller class, I replace DataActionContext by PageLifecycleContext in events parameters. Furthermore, a listen method is added:
public class MyPageController extends PageController
// I want to migrate this event
public void onSearch (PageLifecycleContext ctx)
// code of page event inherited from 10.1.2
// I want to migrate this event
public void onAll (PageLifecycleContext ctx)
// code of page event inherited from 10.1.2
// This is the method I've just added
public void listen (ActionEvent e)
FacesContext context = FacesContext.getCurrentInstance();
HttpServletRequest request = (HttpServletRequest)context.getExternalContext().getRequest();
PageLifecycleContext plc = (PageLifecycleContext)request.getAttribute("ADFLifecycleContext");
String idButton = (String)e.getComponent().getAttributes().get("id");
if (idButton.equals("myButton"))
onSearch(plc);
else if (idButton.equals("myOtherButton"))
onAll(plc);
I'd like to know if there is any other simplier way to do event migration from 10.1.2 to 10.1.3.
Thanks in advance.
Luis Serrano.If you change your view objects to use the new named bind variables in 10.1.3, then you can do what you were doing in prepareModel in a declarative way now using the invokeAction executable in your page definition to trigger the firing of an executeWithParams action.
You can study example #76 on my blog to see an example of doing this:
http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html#76
If you want to do things programmatically still, which is fine of course, then you can reference section 10.5.4.3 "Using Custom ADF Page Lifecycle to Invoke an onPageLoad Backing Bean Method" in the ADF Developer's Guide for Forms/4GL Developers on the ADF Learning Center at http://www.oracle.com/technology/products/adf/learnadf.html The key benefit of this approach is that if you have a backing bean for your page, it allows you to put your prepareModel code inside the backing bean in an onPageLoad() method so you don't end up with both a backing bean and a page controller class for that page.
Of course, you can also still use a customized PageController class and override prepareModel() as you did before. All of these ways are viable. -
Migration from SAP BC To SAP P.I
HI Experts ,
I am required to do migration from SAP BC to SAP P.I. I would require the following Info/Help from you as i have not worked on such scenario before this!
1) What kind of challenges can be faced during migration from BC to XI?
2) What is the best practise for doing the same?
3) Can you share some scenario from where i can have some idea how to do migration?
4) Generally how much time it takes in migration activity if ther are not much interfaces involved in it?
Would appreciate your valuable inputs on the same!
I have read How to guide docs on how to do migration from BC to XI but not convinced with the content
Regards
Saras JainHi Saras,
I am giving you an example senario and a how to do all the steps and why it needed. if you need more information just mail me i'll give you the concerned PDF.
Scenario
SAP Business Connector enables data exchange between an SAP system and
external systems using HTTP and e-mail. SAP Exchange Infrastructure (SAP XI)
replaces SAP Business Connector (SAP BC).
We distinguish between standard scenarios (that do not contain customer-specific
development) and individual scenarios (that do contain services or mappings created
by the customer). The following sections describe how to migrate both types of
scenarios to SAP XI.
Scenario 1 (IDoc HTTP, HTTP IDoc)
An SAP system sends an IDoc to SAP BC or to SAP XI. The IDoc is converted to
XML. It is sent to an external business partner by using HTTP.
An external business partner sends an XML document by using HTTP to SAP BC or
to SAP XI. The document is converted to an IDoc and sent to a connected SAP
system in the internal system landscape.
Scenario 2 (IDoc Mail, Mail IDoc)
An SAP system sends an IDoc to SAP BC or to SAP XI. The IDoc is converted to
XML. It is sent to an external business partner as an e-mail.
An external business partner sends an e-mail to SAP BC or to SAP XI. The
document is converted to an IDoc and sent to a connected SAP system in the
internal system landscape.
Flow Services
Flow services are services that are written in the proprietary graphical-based flow
language of SAP BC.
Java Services
Java services are services that are written in the Java language.
There are several platforms that support Java, including SAP XI. However, the data
model used in the Java services in SAP BC is proprietary.
Stylesheet Transformations
Stylesheet transformations are often used for mapping purposes. They take an XML
document as input, convert it according to rules defined in the stylesheet, which is
also an XML document, and produce an XML document as output.
The XML Stylesheet Transformation Language (XSLT) was defined by W3C (World
Wide Web Consortium), the consortium that defines most of the common standards in modern internet communication, such as HTML and SOAP.
SAP NetWeaver is the open integration and application platform from SAP. With
NetWeaver 04, there is a significant overlap between the functions of SAP
NetWeaver and SAP BC. Many functions provided by SAP BC are offered by SAP XI
as part of SAP NetWeaver, for example, conversion of an IDoc to an XML message,
mapping, routing, and adapters to connect to a large number of third-party back-end
systems. SAP BC is therefore no longer needed. New or updated SAP solutions are
based on SAP NetWeaver. Customers looking for a strategic integration solution for
the complete application landscape should therefore now favor SAP NetWeaver.
The last version of SAP BC was SAP BC 4.7, which was released in June 2003. SAP
BC has not been developed further since this release. SAP BC is not released for
any further platforms (such as Windows 2003) and does not support any further JDK
versions, including the current version (Version 1.4).
For information about the supported SAP BC versions, JDKs, and operating systems,
see SAP Note 309834. For information about the support and maintenance strategy
for SAP BC, see SAP Note 571530. Customers who still use SAP BC need to be
aware of the following:
A solution based on SAP BC cannot be a strategic, long-term solution.
A solution based on SAP BC is based on technology that was implemented in
2003 and that is no longer further developed.
SAP BC is supported on limited platforms and for limited JDKs only. Vendor
support for some of these platforms and JDK versions will soon be
discontinued.
SAP BC and SAP NetWeaver are based on different technologies: SAP BC is based
on webMethods proprietary Integration Server, whereas SAP NetWeaver is based
on open standards, such as BPEL4WS (business process execution language for
web services). Therefore, only parts of an SAP BC implementation, such as XSLT
mappings, can be migrated to a solution based on SAP NetWeaver. Any custom
programming based on SAP BC, such as SAP BC flow language, is unlikely to be
reusable in the SAP NetWeaver context.
Purpose of this Migration Guide
The purpose of this migration guide is to provide scenario-based descriptions of the
migration from a companys system landscape that uses SAP BC to exchange
documents with business partners, to a system landscape that uses SAP XI instead.
This migration guide outlines, for certain scenarios, the individual steps a company
has to take to replace an existing SAP BC implementation with SAP XI.
The basic steps in the back-end systems are:
Defining the logical systems
Maintaining the ALE distribution model
Maintaining partner profiles and EDI ports
Maintaining RFC destinations
The basic steps in the SAP XI system are:
Maintaining the System Landscape Directory
Configuring the IDoc adapter
Maintaining the receiver determinations, interface determinations, and
interface agreements
Maintaining the communication channels
The type of scenario to migrate typically has an impact on the communication channels only.
Scenario 1 IDoc/HTTP
IDoc HTTP Using SAP BC
Within the system landscape of a company, an SAP system sends an IDoc
asynchronously to SAP BC. SAP BC converts the IDoc into a standard IDoc XML
document. The fields of the IDoc are not modified, that is, the conversion does not
involve any mapping of source fields to target fields. After conversion, SAP BC uses
HTTP to send the XML document synchronously to an external URL of a business
partner.
System Landscape
An SAP system and SAP BC are installed within the same system landscape
of a company.
The following information is defined in the SAP system to allow data
exchange between the SAP system and SAP BC:
o An RFC destination and a logical system for SAP BC
o The distribution model is maintained, if necessary
The following information is defined in SAP BC:
o An SAP server with an alias is defined. For this SAP server, the
information that the SAP BC requires to connect to the SAP system is
specified.
o A listener is configured to listen to requests from the SAP system.
o A routing rule with the transport type XML is configured for the
specific sender, receiver, and message type. The routing rule
determines how a message is to be routed and where it is to be routed
to. The scenario described does not use an ACL, (Access Control List
to restrict execution permissions for this routing rule) or pre-processing
or post-processing SAP BC services.
4.2 IDoc HTTP Using SAP XI
Check the prerequisites described above under Prerequisites for Standard
Scenarios.
The IDoc adapter is used to receive an IDoc from an SAP back-end system and
convert it to XML.
The adapter used to post this XML to an external destination is the plain HTTP
adapter.
To set up the communication channel, perform the following steps:
1. Locate the routing rule in SAP
Business Connector.
In the Administration View, choose
Adapters Routing to navigate to
Routing Rules.
2. Select the details of the relevant routing rule.
To display the details, choose the green triangle (Edit).
Transport is typically set to XML and a URL is specified. You can use this
URL in your SAP XI settings.In some cases, Transport is set to
B2B Service and the parameters Server Alias, Folder and Service
exist. This is the same as when Transport is set to XML and has the
URL http://<serverhost>:<port>/invoke/<folder>/<service>.
You can find <serverhost> and<port> in the definition of the
remote server under Settings >Remote Server in the Administration
View.
3. Set up the communication channel in the Integration Directory using the parameters from the SAP BC routing rule.
Use the following settings:
Adapter Type: HTTP Receiver
Transport Protocol: HTTP 1.0
Message Protocol: XI Payload in HTTP Body
Adapter Engine: Integration Server
Addressing Type: URL Address
Target Host, Service Number,and Path need to be set in accordance with the SAP BC routing rule. HTTP Proxy Host and HTTP Proxy
Port can be set if required.All other parameters have no corresponding values in SAP BC and should be set to their default values.
regards
Aashish Sinha
P : Reward points if helpful -
Application Migration from HP-UNIX to SUN Solaris
Hi Gurus,
Need help on the application migration from HP-UNIX to Sun Solaris . Copied the filesystems APPL_TOP, OA_HTML, OA_JAVA, COMMON_TOP/util and COMMON_TOP/_pages from SOURCE( HP) to TARGET SUN-solaris as per 238276.1
Now trying to clone Autoconfig XML context file on the TARGET System
perl adclonectx.pl migrate java=\opt\java1.4 \
contextfile=\ul01\app\applmgr\lasrx\admin\LASRX_fiapd4.xml
Error: source context file ul01appapplmgrlasrxadminLASRX_fiapd4.xml does not exist.
Questions:
======
1. we still need to install jdk in the TARGET or copy the file system from source(HP) to target( Solaris) bring the JDK and how to check jdk on Solaris?
2. In clone autoconfig XML, contextfile=? Is the location of SOURCE or TARGER?
3. I think running above with root permission.
Please help somebody on this issue.
Thank You.Hi Hussein,
I need your help on the Application migration from HP-UNIX to SUN Solaris. As per the note 238276.1 we dont copy $806_ORACLE_HOME for cross platform migration, Copied all the filesystem from SOURCE to TARGET but rename it because it suppose to create while installing Middle tier.
Issue:1
=====
When i start to set environment like below, i get the error and
. /ul01/app/applmgr/lasrx/APPSORA.env
ksh: /ul02/app/oracle/lasrx/8.0.6_new/LASRX_fiapd4.env: not found
I am trying to install Middle Tier Technology Stack on SUN server ( Migrating from HP-UNIX to SUN solaris)
Issue 2: ( Display error) while install Tech Stack
=====
./rapidwiz -techstack
Rapid Install Wizard is validating your file system......
>> Wizard requires the DISPLAY variable to be set.
>> Please set your DISPLAY variable and restart Rapid Install Wizard.
even i can not see
echo $DISPLAY because not set the environment.
Need your help and suggetions on this.
Thank You. -
Problem with Java Native Type after Migration from 7.0 to 7.1
Hi,
after Migration from Netweaver 7.0 to Netweaver 7.1 I get following error:
FileDownload 'FileDownload.data': Context attribute 'PrintSelectedView.PdfToDownload.resourceInputStream' has the Java native type 'com.sap.tc.webdynpro.progmodel.api.IWDInputStream' and cannot be bound to this property. Hint: Remove the binding or bind a context element matching the property's type.
What have I done wrong?
How could I fix this problem?
Best regards,
PeterHi,
thanks, this solved the problem.
Thank you.
Best regards,
Peter -
Migrating from Sybase Anywhere to ASE
I am in process of migrating from Sybase Anywhere to ASE and trying to import a table from Anywhere to ASE, I getting following error message that could not find appropriate data type for column - now this column from Anywhere has data type of datetime.
ASE does not have any wizards so you must be using some sort of GUI/tool/application.
What GUI/tool/application are you using? PowerDesigner? Sybase Central? Sybase Control Center? Something else?
Can you *connect* to the ASA and ASE instances with this GUI/tool/application? [Forget the 'import' operation for the moment ... and verify you can just *connect* to both ASA and ASE.]
Also, what is the actual/complete error message?
NOTE: I don't use GUI/tools so depending on the error there may not be much more I can assist with. -
Migrating from ASA5510(8.4.1) to 5525x (9.1x).. Should I be NAT worried?
I recently attempted to move from a ASA 5510 over to a spare 5520 running the same code (8.4.1) and ran into a problem with NAT to the Internet. I had set the same public IP address due to several vendors accepting only this certain address. So, when I migrated to the new 5520, NAT on this address did not work, meaning no traffic outbound would pass. However, if I change to another Public address no problems with traffic passing as expected.
So my question is, I am migrating to a scratch-built 5525x using 9.1x code and will be using the same Public NAT address as on the 5510. Should I expect traffic to pass as expected or do I need to migrate to another address? Logic is telling me there should be no issues, but recent experience is making me jittery...
Thanks for any comments
DaveYour recent experience may not have had anything to do with NAT per se even though that's how it manifested itself most obviously to you.
I suspect it may have had to do with your upstream gateway's arp cache. I have often seen when replacing hardware that we need to ask the ISP to flush their ARP cache so they can re-learn the new MAC address association to your pre-existing IP.
In any case, NAT should not be adversely affected when migrating from 8.4(1) to 9.1(x). -
Problem when migrating from JSF1.1 to 1.2
Hi,
We are migrating WAS6.0 to WAS 7.0 - JSF1.1 to JSF1.2
We have modified faces-config file and added below part.
<faces-config xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee
http://java.sun.com/xml/ns/javaee/web-facesconfig_1_2.xsd"
version="1.2">
But while trying to access the application we are getting the below error,
[6/7/11 22:40:36:520 EDT] 00000037 SystemOut O 2011-06-07 22:40:36,519 [WebContainer : 0 - ClientControllerServlet - ] DEBUG - action=locales
[6/7/11 22:40:36:537 EDT] 00000037 AdfFacesFilte W oracle.adf.view.faces.webapp.AdfFacesFilterHelper verifyFilterIsInstalled The AdfFacesFilter has not been installed. ADF Faces requires this filter for proper execution.
[6/7/11 22:40:36:579 EDT] 00000037 lifecycle E JSF1054: (Phase ID: RESTORE_VIEW 1, View ID: "") Exception thrown during phase execution: javax.faces.event.PhaseEvent[source=com.sun.faces.lifecycle.LifecycleImpl@403b403b]
[6/7/11 22:40:36:590 EDT] 00000037 SystemOut O 2011-06-07 22:40:36,590 [WebContainer : 0 - SessionCheckPhaseListener - ] DEBUG - page will be shown as user[null]
[6/7/11 22:40:36:590 EDT] 00000037 SystemOut O 2011-06-07 22:40:36,590 [WebContainer : 0 - SessionCheckPhaseListener - ] DEBUG - show page[true]
[6/7/11 22:40:36:591 EDT] 00000037 SystemOut O 2011-06-07 22:40:36,591 [WebContainer : 0 - CustomFacesServlet - ] ERROR - javax.servlet.ServletException: viewId:/brazil/web/brazil/client/languages.jsp - View /brazil/web/brazil/client/languages.jsp could not be restored.
[6/7/11 22:40:36:869 EDT] 00000037 AdfFacesFilte E oracle.adfinternal.view.faces.webapp.AdfFacesFilterHelperImpl _setupJboDomainStuff
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
at java.lang.reflect.Method.invoke(Method.java:611)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterHelperImpl._setupJboDomainStuff(AdfFacesFilterHelperImpl.java:192)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterHelperImpl.init(AdfFacesFilterHelperImpl.java:64)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.init(AdfFacesFilterImpl.java:96)
at oracle.adf.view.faces.webapp.AdfFacesFilter.init(AdfFacesFilter.java:58)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.init(FilterInstanceWrapper.java:140)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager._loadFilter(WebAppFilterManager.java:548)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.loadFilter(WebAppFilterManager.java:462)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.getFilterInstanceWrapper(WebAppFilterManager.java:319)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.getFilterChain(WebAppFilterManager.java:379)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:860)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:934)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:502)
at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.handleRequest(ServletWrapperImpl.java:179)
at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3933)
at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:276)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:931)
at com.ibm.ws.webcontainer.WSWebContainer.handleRequest(WSWebContainer.java:1583)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:186)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:445)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:504)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:301)
at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:83)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:138)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:204)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:775)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:905)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1604)
Caused by: java.lang.IllegalStateException: ELResolvers cannot be added after the application initialization is complete.
at com.sun.faces.application.ApplicationImpl.setPropertyResolver(ApplicationImpl.java:424)
at oracle.adfinternal.view.faces.webapp.AdfModelHelper.init(AdfModelHelper.java:37)
... 34 more
Could you please help us to resolve this issue?
Regards,
Mohanraj MHi,
Currently we are migrating from WAS 6.0 to WAS 7.0. We are using JSF1.1 and ADF 10.1.3 . We don't want to migrate JSF and ADF , so we are using shared libraries.
Everything is working fine except adf popup. New window is opening, but we are not able to pass any value from parent to child. It is coming as null. Also we are not able to close popu also not able to transfer any data from popup to parent using returnfromdialog method.
We are getting the below exception,
[6/16/11 14:58:59:495 EDT] 00000042 DialogService W oracle.adfinternal.view.faces.context.DialogServiceImpl returnFromDialog No 'DialogUsedRK' key available for returnFromDialog to do the right thing!
[6/16/11 14:58:59:496 EDT] 00000042 InvokeApplica E com.sun.faces.lifecycle.InvokeApplicationPhase execute popView(): No view has been pushed.
java.lang.IllegalStateException: popView(): No view has been pushed.
at oracle.adfinternal.view.faces.context.DialogServiceImpl.popView(DialogServiceImpl.java:69)
at oracle.adfinternal.view.faces.context.DialogServiceImpl.returnFromDialog(DialogServiceImpl.java:230)
at oracle.adfinternal.view.faces.context.AdfFacesContextImpl.returnFromDialog(AdfFacesContextImpl.java:91)
at oracle.adfinternal.view.faces.taglib.listener.ReturnActionListener.processAction(ReturnActionListener.java:39)
at javax.faces.event.ActionEvent.processListener(ActionEvent.java:77)
at oracle.adf.view.faces.component.UIXComponentBase.broadcast(UIXComponentBase.java:548)
at oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:200)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:287)
at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:401)
at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:95)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:213)
at com.avon.arrm.brazil.presentation.common.CustomFacesServlet.service(CustomFacesServlet.java:55)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1657)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1597)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:131)
at com.avon.arrm.brazil.presentation.common.ServletADFFilter.doFilter(ServletADFFilter.java:42)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:188)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:116)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:228)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:197)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:123)
at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:105)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:188)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:116)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:77)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:908)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:934)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:502)
at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.handleRequest(ServletWrapperImpl.java:179)
at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:91)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:864)
at com.ibm.ws.webcontainer.WSWebContainer.handleRequest(WSWebContainer.java:1583)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:186)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:445)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:504)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:301)
at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:83)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:138)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:204)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:775)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:905)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1604)
[6/16/11 14:58:59:505 EDT] 00000042 SystemOut O 2011-06-16 14:58:59,505 [WebContainer : 1 - CustomFacesServlet - ] ERROR - javax.servlet.ServletException: popView(): No view has been pushed.
Hi,
Currently we are migrating from WAS 6.0 to WAS 7.0. We are using JSF1.1 and ADF 10.1.3 . We don't want to migrate JSF and ADF , so we are using shared libraries.
Everything is working fine except adf popup. New window is opening, but we are not able to pass any value from parent to child. It is coming as null. Also we are not able to close popu also not able to transfer any data from popup to parent using returnfromdialog method.
We are getting the below exception,
[6/16/11 14:58:59:495 EDT] 00000042 DialogService W oracle.adfinternal.view.faces.context.DialogServiceImpl returnFromDialog No 'DialogUsedRK' key available for returnFromDialog to do the right thing!
[6/16/11 14:58:59:496 EDT] 00000042 InvokeApplica E com.sun.faces.lifecycle.InvokeApplicationPhase execute popView(): No view has been pushed.
java.lang.IllegalStateException: popView(): No view has been pushed.
at oracle.adfinternal.view.faces.context.DialogServiceImpl.popView(DialogServiceImpl.java:69)
at oracle.adfinternal.view.faces.context.DialogServiceImpl.returnFromDialog(DialogServiceImpl.java:230)
at oracle.adfinternal.view.faces.context.AdfFacesContextImpl.returnFromDialog(AdfFacesContextImpl.java:91)
at oracle.adfinternal.view.faces.taglib.listener.ReturnActionListener.processAction(ReturnActionListener.java:39)
at javax.faces.event.ActionEvent.processListener(ActionEvent.java:77)
at oracle.adf.view.faces.component.UIXComponentBase.broadcast(UIXComponentBase.java:548)
at oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:200)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:287)
at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:401)
at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:95)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:213)
at com.avon.arrm.brazil.presentation.common.CustomFacesServlet.service(CustomFacesServlet.java:55)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1657)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1597)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:131)
at com.avon.arrm.brazil.presentation.common.ServletADFFilter.doFilter(ServletADFFilter.java:42)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:188)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:116)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:228)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:197)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:123)
at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:105)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:188)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:116)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:77)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:908)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:934)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:502)
at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.handleRequest(ServletWrapperImpl.java:179)
at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:91)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:864)
at com.ibm.ws.webcontainer.WSWebContainer.handleRequest(WSWebContainer.java:1583)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:186)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:445)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:504)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:301)
at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:83)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:138)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:204)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:775)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:905)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1604)
[6/16/11 14:58:59:505 EDT] 00000042 SystemOut O 2011-06-16 14:58:59,505 [WebContainer : 1 - CustomFacesServlet - ] ERROR - javax.servlet.ServletException: popView(): No view has been pushed.
Could anyone please help us to resolve this issue.
Maybe you are looking for
-
How can I display East Asian characters in MediaSour
I am using Windows XP SP2 Chinese Traditional (Taiwan) edition, although I li've in the US. My system setting is by default Chinese Traditional, and I have enabled East Asian language support for Chinese, Japanese, and Korean. However, Creai've Media
-
Line Height shrinks when hovering over linked image
Last line of text (above footer) has a small blue LinkedIn Icon as an image link. 20px line height shrinks when hovering over image. Any workarounds will be much appreciated. http://www.workandpartners.com/alan.php
-
CC failing to install - error 62
I'm using a Mac, OS 10.9.2. I am hardwired for downloading process. I have tried using the CC Cleaner, and it didn't show there was anything to clean.
-
How do I install Geometers sketch pad for the mac? And is it free?
I have to download publisher and Geomters sketch pad for school, can I dowlaod it too the mac and is it free aswell??
-
So I must be missing something, how are we supposed to use Flex to build business apps which often have to parse hundreds of thousands of rows of data with a 60 second hard limit on code execution? Nothing I can find will get around this limitation a