Context (Right Click) Actions Incredible Slow in Project Window

I have a 3 MB project, relatively small (I think). Lots of sequence versions, a fairly large pool of media, it's for five short (2.5 minute) film pieces. Whenever I go to duplicate a sequence, it can take upwards of 2minutes to make that happen. Whenever I right click on a sequence (or any media in the project window) the program beach balls, and then the context window comes after 10 - 15 seconds.
What's the deal with that? Is that a known bug in Premiere CC14? Is there something technical with my project I don't realize is happening. I have an 8 Core, Late 2013 Mac Pro (Trash Can) with 32 GB of RAM, so I can't fathom it being a memory problem.

Hi Joshua,
I have a 3 MB project, relatively small (I think). Lots of sequence versions, a fairly large pool of media, it's for five short (2.5 minute) film pieces. Whenever I go to duplicate a sequence, it can take upwards of 2minutes to make that happen. Whenever I right click on a sequence (or any media in the project window) the program beach balls, and then the context window comes after 10 - 15 seconds.
What's the deal with that? Is that a known bug in Premiere CC14? Is there something technical with my project I don't realize is happening. I have an 8 Core, Late 2013 Mac Pro (Trash Can) with 32 GB of RAM, so I can't fathom it being a memory problem.
That's wacky, man. I have a MacBook Pro on OS X Yosemite 10.10.2. I can right click and duplicate a sequence in less than a second. Something is definitely up with your system. I recently updated to OS X 10.10, but I did so carefully, so that is what I attribute my "problem free" system to.
I wiped my disk completely prior to installing OS X Yosemite 10.10
I ensured all my Adobe folders were set to R/W
Repaired disk permissions
Trash media cache regularly
You might try Software Only mode for the Mercury Playback Engine
Other than wiping your disk, you can try the other things to see if you get improved behavior. If you still have trouble, contact Adobe Customer Care: Contact Customer Care ask for the "video queue" to ensure you are routed correctly. They're open M-F 7AM to 7PM PST
Thanks,
Kevin

Similar Messages

PerformancePoint right click action opens in un-resizable window after migration.

Greets all,
We've recently upgraded a client's SharePoint 2010 farm to 2013 including a number of PerformancePoint dashboards. Most of these dashboards include Analytics charts with Right-click actions that open Reporting Services Reports.
Since the migration, these windows now open in a 600 * 600 window, with no toolbars and no ability to resize in IE. Firefox and Chrome work fine.
We've traced the problem to the PPSMA.NewWindow.openUrl() method that is supplied in the dashboardframework.js as part of PerformancePoint. This method calls window.open(URL,name,options) but doesn't specify the resizable=yes option. This is a completely
different method tot hat used by the SP2010 version of PPS as far as we can see.
My current workaround is to currently try and overide this function be redefining it on the page but with the option. I'd be greatful if anyone else has come across this and solved it another way? (Or if it's a bug in PPS that MS have fixed with an update,
but I can't find any info..)
Many thanks
Paul.
PS.. The client environment is using IE9, so I haven't been able to test this in 10 or 11.
Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

Hi Cimares,
We are currently looking into this issue and will give you an update as soon as possible.
Thank you for your understanding and support.
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

[1.1.0.23.64] Drill down reports - right click actions

The release notes of SQL Developer version 1.1 includes a line concerning 'increased right click actions' for the reports category. One of the new actions is 'Go to <object>', if you select this action it will show you the properties of the object. For instance, when performing a right click and selecting 'Go to EMP' on the EMP row in
the result set of the 'All objects' report, SQL Developer shows you the properties of the EMP table. This feature is also known as drill down capability (for screen shots see http://jornica.blogspot.com/2006/12/changing-preferences-by-executing.html).
In the previous version 1.0, the 'Go to' object name was implemented by double-clicking a row in the result set. In version 1.1, if you double-click a row SQL Developer shows a button (this button appears in the cell you double-click). If you click this button SQL Developer shows the Edit Value window for Line terminator value.You can change this value by clicking the change button and SQL Developer shows the Preferences window.
Because the line terminator value is a global setting (this value is used for every report) I'm wondering why you can change the line terminator value in version 1.1 from every result set cell? You can also use the main menu Alt-Tools Preferences. I find the version 1.0 drill down capability much more intuitive and easier to use than the version 1.1 implementation.
With kind regards,
Jornica

This is exactly the same problem I have.
Not able to start remote debug listener

Any methods or interfaces for Mouse Left and Right click actions?

Could anyone tell me the methods that I can use for setting up Mouse Left click and Mouse Right click actions? I checked the on-line API and could not find those specifications. Maybe I misses something and did not find them. If you just happen to know it, could you reply this message or you can tell me where I can search to find it. Thanks for your help. Bob

I believe you just set up to receive all mouse click events regardless of which mouse button the user clicked. When you get the MouseEvent object, call its getModifiers method to get an indication of which mouse button was pressed. Check the javadocs for MouseEvent, paying particular attention to "the button mask in the modifer field"

Can I associate a right-click action w/ a text entry button?

Is there a way to associate a right-click action with a text
entry button? I tried to do a shift-F10 (windows equivalent) but it
wasn't recognized. I suspect it is not possible, but thought I
would ask.

Ahhhh, the fog is lifting now!
Thanks for fleshing that out a bit. There are a few different
ways to handle right-click in Captivate. See the links below for
more.
Adobe
Developer Center Article 1
Adobe
Developer Center Article 2
Paul
Dewhurst's Right-Click widget
Hopefully something there will help... Rick

Edge Animate CC crashes on right-click on any Object in Elements window

Hi,
Every time I right click on an Object in Elements window Animate crashes on me.
Same thing happens, when i click on the "Open Actions" Button - "{ }"
I really would apreciate some kind of help with this problem, since I am able to accomplish nothing this way.
I am running on a 2010 MacBook Pro 3.06 GHz Core 2 Duo - OSX 10.9
Adobe Edge CC downloaded today via Creative Cloud
Thanks in advance,
have a beautiful day,
Anne

Hi hemanth,
Thanks for the reply,
I am Using Edge Animate 3.0.0.322.27519
(Actual Version downloded via Creative Cloud)
I renamed the Folder
/Users/Your User Name/Library/Application Support/Adobe/Edge Animate
TO
.../OLD Edge Animate
as suggested in the link you gave me...
I restarted An and not only is the problem still ocurring, but also the program did not create a new '.../Edge Animate' Folder.
The Link you gave me stated:
After you have removed your existing preferences, restart Edge Animate. The application creates new preferences files and folders using the default settings.
This did not happen.
but program is starting normally without the preferences Folder obviously - problems stay the same
It's nice to know, that you are there to care about the problem -
thanks for that so far and if you can think of anything else -
don't hesitate to write
have a beautiful day,
Anne**

Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL..

Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL. However, if I right click on a link and select "Open Link In New Tab", the Tab shows URL in address bar. So it's working when it's a New Tab but not a New Window.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Hai i am using firefox 3.6.When right clicking on a link and a window opens up, i want it to ask me "Open Link in New tab" first, not second.

hai i am using firefox 3.6.When right clicking on a link and a window opens up, i want it to ask me "Open Link in New tab" first, not second.

First, you are using a version of Firefox that is very old and outdated. Please update to at least Firefox 3.6.27, or more preferably, update to Firefox 10.0.2. There are lots of bug fixes, security improvements, and much improved performance in Firefox 10.
After you do that, try seeing if you are still having a problem. If you are, is this that when you try to select "Open in a new tab" it opens in a new window instead? Or something else?

I right-click in a Yahoo e-mail window and select Languages - Spanish (Mexico) and start typing in Spanish, but it is not correcting my mistakes, or offering alternative spellings.

I speak English. I am living in Chile and have a Dell/MS Windows Vista (English) laptop. I have Firefox 3.6.12. I have installed the Spanish (Mexico) dictionary. I right-click in a Yahoo e-mail window and select Languages - Spanish (Mexico) and start typing in Spanish, but it is not correcting my mistakes, or offering alternative spellings.
I don't know if I have the correct plug-in, correct settings, or am expecting something that isn't possible.

Do other dictionaries work if you select them in the Languages menu?
See:
* http://kb.mozillazine.org/Spell_checking
* http://kb.mozillazine.org/Dictionaries
* [[Using the spell checker]]

Apex Calendar Context (right click) menu

Hi all,
Apex version: 4.2
Plugin: context(rightclick) menu by Vikram
I'm using this plugin and it works perfectly for SQL Reports and IRs. For example this function opens a new popup window with the ID selected by right clicking an entry.
function myMenuAction(action, el, pos)
if (action=='TEST')
window.open('f?p=&APP_ID.:52:&SESSION.::NO::P1_ID:' + $(el).children('td[headers="ID"]').text(),'Popup','height=800,width=800,toolbar=no,directories=no,status=no,menubar=no,scrollbars=yes,resizable=no ,modal=yes');
...I want to know if there is a way to do the same on an apex calendar entry.
Thanks in advance.
Matt.
(changed 'handle')
Edited by: 942631 on 08.04.2013 03:24
Edited by: 942631 on 08.04.2013 03:43
Edited by: 942631 on 08.04.2013 03:43

Matt S. wrote:
http://apex.oracle.com/pls/apex/f?p=62302:1
User: demo
PW: demo
When i do the same on the calendar ("Home") i don't get the ID "http://apex.oracle.com/pls/apex/f?p=62302:4:111941727026117::P3_X".
What i expect is (in this example) "http://apex.oracle.com/pls/apex/f?p=62302:4:111941727026117::P3_X:*7499*"
This is what i wanted to do. I tried different things to achieve the same result as in "TS2".you haven't provided the workspace login details to check if this works but I managed to see that you are currently using a jquery selector *#CALENDAR_PRZ_LIST table tr*
try this instead
.Calendar tbody tr td div

Context right-click to export XMP metadata to file

I'd like to have the right click context menu include the option to "Export XMP Metadata to Files" in the Library grid or filmstrip. Currently an annoying trip to the Menu bar is required to invoke this function.

It was there for B4.1. The Contextual Menus are getting crowded, so maybe that's why they took it out.
I like lots of Contexual Menus,too. But they get a little useless if too crowded, so maybe they need ot be user configuarable for what one uses the most.
Maybe by V1.5?
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.8 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

Right click delay (not slowness)

Hi
I'm using a Lenovo y50 and my right click only activates if I press and hold down the button for a few seconds (using mouse and touch pad). I'm not talkijg about the context menu loading slowly. The click itslef happens after few seconds of holding. How can I change this?

I am also having this issue but my laptop does not have Bluetooth as its so old but I still get major right click lag

"Combine supported files in Acrobat" right-click funtion is slow or locks up system since upgrade to Office 2013

I have several admins who have for years combined quantities of large Word documents into a single PDF by highlighting them, right-clicking, and selecting "Combine supported files in Acrobat." Until recently, they were all using Office 2010 Pro Plus and a variety of versions of Acrobat - Standard 9, Professional 9, Standard 10. They said it was quick and painless. We've recently deployed Office 2013 Pro Plus, and they are complaining that doing the same thing they've always done is either completing but yeilding only the first document in the resulting PDF or rendering their systems unresponsive. I have reproduced their issues and have found some evidence online of Possible incompatibilities between Office programs and the Adobe Acrobat PDFMaker Office COM Addin add-in, however Adobe's list of Compatible web browsers and PDFMaker applications indicates that Office 2013 supports PDFMaker versions as old as Acrobat 6, and we are not that outdated. Any suggestions? This is crippling their productivity.
Thanks!
Carrie

Only the updated Acrobat XI supports Office 2013. The updates are necessary to address the changes to OFFICE introduced after Acrobat XI was released (OFFICE 2013 is more recent than the original AA XI release). No other versions of Acrobat can be used with OFFICE 2013 other than printing to the Adobe PDF printer.

Firefox Dictionary options for "functionality" showing on every right-click action.

When i right-click on a link (including a misspelled word link), I get the standard right-click menu, plus a listing of different auto-correct options for "functionaility." I have a screenshot of what I'm seeing. Using Firefox 5.0.1 on Mac OS X 10.6.8

Look at the image below for what you should see. This example is with no extensions installed. Your menu may be different, with additional items if add-ons included them.
See [https://support.mozilla.com/en-US/kb/Using%20the%20spell%20checker Using the spell checker]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]

Loosing Right Click When Install CS4 64bit on Windows Vista 64

Weird Photoshop CS4 installation problem:
1) Windows Vista 64 bit new installation SP 2
2) firewall is off
3) I have installed & reinstalled the program several times
4) When installed I am loosing the Windows Right Click and I get this error message:
"The specified module could not be found: c:\program files\adobe\adobe version cue\client\4.0.1\versioncue.dll
All the version cue files are installed but I still loose the right click and get that error message. I also get the same message when I click the folder options when I try and set security permissions
Please advise

Have you used the CS4 Clean Utility before your re-install? What happens is that Adobe Drive is messing up things, so I recommend to re-install without it. This little tip may also help:
http://www.aeonity.com/david/how-remove-adobe-drive-cs4-from-context-menu
Mylenium

Context (Right Click) Actions Incredible Slow in Project Window

Similar Messages

Maybe you are looking for