Context server not started - ULOG does not contain any errors
Hello, please, could anyone help us?
If I try to boot server, only folowing processes are started :
exec BBL -A :
process id=296400 ... Started.
Booting server processes ...
exec TMUSREVT -A :
process id=296516 ... Started.
exec TMSYSEVT -A :
process id=296087 ... Started.
exec contextserver -A -e /d2/mimstst/mims_run_t/log/error.log
The last process doesn't finish, no other processes start, in ULOG are only info
about started processes :
ULOG content...
Do you have any idea?
Petr,
There is nothing called "contextserver" that ships as part of Tuxedo. The
servers that started OK are all supplied out of the box with Tuxedo.
You need to get the source to "contextserver" and see what it is doing. I
suspect the problem might be in whatever code it provided as a tpsvrinit() routine.
Regards,
Peter.
Petr wrote:
Hello, please, could anyone help us?
If I try to boot server, only folowing processes are started :
exec BBL -A :
process id=296400 ... Started.
Booting server processes ...
exec TMUSREVT -A :
process id=296516 ... Started.
exec TMSYSEVT -A :
process id=296087 ... Started.
exec contextserver -A -e /d2/mimstst/mims_run_t/log/error.log
The last process doesn't finish, no other processes start, in ULOG are only info
about started processes :
ULOG content...
Do you have any idea?
Similar Messages
-
Hi,
I have a Sharepoint 2013 farm I am trying to provision search for (not the same as my other thread). However, I get the below error:
Exception calling "Activate" with "0" argument(s): "Topology does not contain any components of type Microsoft.Office.Server.Search.Administration.Topology.AdminComponent"
In my script, I have the following:
New-SPEnterpriseSearchAdminComponent -SearchTopology $clone -SearchServiceInstance $SearchServiceInstanceServer3 -ErrorAction SilentlyContinue
So I am not sure why the error happens, when I am trying to set this component. However, it's not the first component to be set (index partition on non-local servers first). I can make it first, but why does this error happen?
UPDATE: I have noticed that the usage and health proxy on my farm is/was stopped, but I am not able to access the server(s) to look at this right now. Could this cause this issue?Do you already have Admin component running for the Search Service Application?
Usage and Health Service will not cause this issue.
Please also refer to below discussion to see if it helps:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/02f0b072-aa3a-4b7f-9662-2caf373d1e57/setspenterprisesearchtopology-identity-newtopology?forum=sharepointgeneral
Warm Regards,
Bhavik K Jain
Sr. Software Engineer - SharePoint Administration
Please vote if my reply helps and ensure that you mark a question as Answered once you receive a satisfactory response. -
Context node does not contain any elements
Hi Masters,
I create a node dynamically from structure using CL_WD_DEMO_DYN_MODEL->create_nodeinfo_from_struct method. my code as
nd_field_info = nd_field->get_node_info( ).
wd_this->zwd_assist->create_nodeinfo_from_struct( EXPORTING
parent_info = nd_field_info
structure_name = dotablename
is_multiple = abap_true ).
When am set the data to context then it gives the error like node does not contain any elements, but i verified the attributes using nodeinfo then all attributes will be displayed, but when value inserting time it throws error.
Waiting for Your Response...
Advance Thankyou
Regards,
SathyaHi sathya ,
the method you using is absolute , the replacement for the methos is if_wd_context_node_info->add_new_child_node
pls refer the sample code to create a dynamic Node .
DATA: pa0001 TYPE REF TO cl_abap_structdescr,
comp_tab TYPE cl_abap_structdescr=>component_table,
struct_type TYPE REF TO cl_abap_structdescr,
ls_pa0001 ?= cl_abap_typedescr=>describe_by_name('P0001').
comp_tab = p0001->get_components( ).
struct_type = cl_abap_structdescr=>create( comp_tab ).
struct_type = cl_abap_structdescr=>create( comp_tab ).
* now the nodeinfo is created
node_info = wd_context->get_node_info( ).
node_info = node_info->add_new_child_node(
name = 'MY_NODE'
IS_MANDATORY = ABAP_true
IS_MULTIPLE = ABAP_true
STATIC_ELEMENT_RTTI = struct_type
IS_STATIC = ABAP_false
refer DEMODYNAMIC component for dynamic creation of node
regards
Chinnaiya P
Edited by: chinnaiya pandiyan on Dec 15, 2010 2:07 PM -
Stack file that is generated does not contain any java components
We are in process of upgrading our ecc6.0 system with ehp4. The enhancement is stuck up in configuration phase for JAVA. Though we have configured Java in solution manager the stack file that is generated does not contain any java components and so the installation is stuck up. Kindly request you to advice us on this issue .
Attached is the 'Trouble Ticket Report', PREPARE_JSPM_QUEUE_CSZ_01.LOG, and SMSDXML_EA4_20100623144541.375.txt
++++
Trouble Ticket Report
Installation of enhancement package 1 for SAP NetWeaver 7.0
SID................: EA4
Hostname...........: wipro
Install directory..: e:/usr/sap/EA4
Upgrade directory..: F:\EHPI\java
Database...........: Oracle
Operating System...: NT
JDK version........: 1.6.0_07 SAP AG
SAPJup version.....: 3.4.29
Source release.....: 700
Target release.....: 700
Start release SP...: $(/J2EE/StandardSystem/SPLevel)
Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
Current usages.....:
ABAP stack present.: true
The execution of PREPARE/INIT/PREPARE_JSPM_QUEUE ended in error.
The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
More information can be found in the log file F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue
com.sap.sdt.ucp.phases.PhaseException
The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
PREPARE_JSPM_QUEUE
INIT
NetWeaver Enhancement Package Installation
SAPJup
Java Enhancement Package Installation
++++++
PREPARE_JSPM_QUEUE_CSZ_01.LOG>>
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
<!PATTERN[PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been started.
Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue.
Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]: Parameter inputFile=EHPComponents.xml
Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMQueuePreparatorFactory.createJSPMQueuePreparator(JSPMQueuePreparatorFactory.java:93) [Thread[main,5,main]]: Creating JSPM SP Stack queue preparator.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.dialog.elim.DialogEliminatorContainer.canBeOmitted(DialogEliminatorContainer.java:96) [Thread[main,5,main]]: Dialog eliminator spStackDialogEliminator allows to omit dialog SPStackLocationDialog
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator RequiredFields.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator SPStackLocationValidator.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:107) [Thread[main,5,main]]: Using SP Stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:488) [Thread[main,5,main]]: STACK-SHORT-NAME tag is missing. The CAPTION of the stack will be used as stack name.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:582) [Thread[main,5,main]]: PRODUCT-PPMS-NAME tag is missing. The CAPTION of the product will be used as product PPMS name.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of stack definition file E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml has finished.
Jun 28, 2010 9:21:24 AM [Error]: com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Jun 28, 2010 9:21:24 AM [Error]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) [Thread[main,5,main]]: The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been completed.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/06/28 09:21:23.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/06/28 09:21:24.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:00.781.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
++++++++++++++++++++++
[stack xml data: version=1.0]
[SPAM_CVERS]
ST-PI 2005_1_7000006
LSOFE 600 0015
SAP_AP 700 0015
SAP_BASIS 701 0003
SAP_ABA 701 0003
SAP_BW 701 0003
PI_BASIS 701 0003
PLMWUI 700 0002
SAP_APPL 604 0002
EA-APPL 604 0002
SAP_BS_FND 701 0002
EA-IPPE 404 0002
WEBCUIF 700 0002
INSURANCE 604 0002
FI-CA 604 0002
ERECRUIT 604 0002
ECC-DIMP 604 0002
EA-DFPS 604 0002
IS-UT 604 0002
IS-H 604 0003
EA-RETAIL 604 0002
EA-FINSERV 604 0002
IS-OIL 604 0002
IS-PRA 604 0002
IS-M 604 0002
SEM-BW 604 0002
FINBASIS 604 0002
FI-CAX 604 0002
EA-GLTRADE 604 0002
IS-CWM 604 0002
EA-PS 604 0002
IS-PS-CA 604 0002
EA-HR 604 0005
SAP_HR 604 0005
ECC-SE 604 0002
[PRDVERS]
01200314690900000432SAP ERP ENHANCE PACKAGE EHP2 FOR SAP ERP 6.0 sap.com EHP2 FOR SAP ERP 6.0 -00000000000000
01200314690900000463SAP ERP ENHANCE PACKAGE EHP4 FOR SAP ERP 6.0 sap.com EHP4 FOR SAP ERP 6.0 -00000000000000
01200615320900001296 sap.com +00000000000000
01200615320900001469SAP ERP ENHANCE PACKAGE EHP3 FOR SAP ERP 6.0 sap.com EHP3 FOR SAP ERP 6.0 -00000000000000
01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01 +00000000000000
[SWFEATURE]
1 01200615320900001296SAP ERP 2005 sap.com SAP ERP 6.0: SAP ECC Server
19 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Discrete Ind. & Mill Products
20 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Media
21 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Utilities/Waste&Recycl./Telco
23 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Leasing/Contract A/R & A/P
24 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Retail
25 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Global Trade
26 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Supply Chain Mgmt
30 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Central Applications
31 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Strategic Enterprise Mgmt
33 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Human Capital Management
37 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas
38 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Catch Weight Management
42 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Public Sector Accounting
43 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Insurance
44 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Hospital
45 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ECC Server VPack successor
46 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: ERecruiting
47 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Defense & Public Security
48 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Services
55 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas with Utilities
56 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Defense
59 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: PLM Core
69 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: EAM config control
9 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ESA ECC-SE
++++++++++++++++Though we have configured Java in solution manager the stack file that is generated does not contain any java components
You will probably need to update Solution Manager first with a number of corrections so you can get a correctly generated stack file. Depending on your ST400 version in Solution Manager apply collective corrections from "Note 1461849 - MOpz: Collective corrections 24" or "Note 1452118 - MOpz: Collective Corrections 23". They generally deal with these kind of stack file issues.
Nelis -
Update structure does not contain any elements error
Dear Friends in am a newbie in WDA. My Function Module has the following decalarations.
TABLES
*" U_P9006 STRUCTURE P9006
*" IT_P9006 STRUCTURE P9006
IT_P9006 is used to fill all the values in the Table, if the user wants to create a new entry in the table then he will click on the new button and U_9006 will be used to hold the new value and save in the database.
when i binded U_9006-EmployeeNumber to a Input box to accept values and tested the application dumps giving the error
"Adapter error in INPUT_FIELD "TC_1_EMPLOYEE_CODE" of view "ZHOLIDAY.MAINVIEW": Context binding of property STATE cannot be resolved: Node COMPONENTCONTROLLER.1.ZESS_EDU.1.CHANGING_1.1.U_P9006 does not contain any elements "
i have 3 basic questions please help me.
1. Currently the cardinality of the Node U_9006 is 0..n and Selection 0..1 , i reffered few sdn threads where it says change the cardinality to 0..n and issue will resolve , my issue is cardinality is already 0...n and even if i try to change it at the context tab it is not changing.
2. if map the INPUT BOX a String attribute ctx_employee rather than mapping it to the U_P9006-EmployeeNumber the page does not dumps , but how do i assign this ctx_employee value to the u_9006-employeenumber in the coding?
3. any sample of SAVE code so that on those lines i write SAVE coding and try to update the record.
Regards,
JackJack,
Bind_table , bind_element methods are used to insert records into NODE, not into database table.
As you said you want to insert records into custom infotype, you need to use function modules to create .
For infotype tables we use below function module to insert records
HR_INFOTYPE_OPERATION
DATA return1 TYPE bapireturn1.
DATA: wa_9006 TYPE p9006.
NOW PASS ALL THE VALUES OF WA_9006.
WA_9006-PERNR = LV_EMPID.
wa_9006-begda = " provide start date'
wa_9006-endda = ' provide end date
wa_9006-aedtm = sy-datum.
wa_9006-uname = sy-uname. ///LY PASS ALL THE VALUES OF P9006 TABLE( CHECK SE11 FOR FIELDS )
THEN CALL BELOW FUNCTION MODULE.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
infty = '9006'
number = wa_9006-pernr
* subtype = wa_9006-subty
* OBJECTID =
* LOCKINDICATOR =
validityend = wa_9006-endda
validitybegin = wa_9006-begda
* RECORDNUMBER =
record = wa_9006
operation = 'INS'
* TCLAS = 'A'
* DIALOG_MODE = '0'
* NOCOMMIT =
* VIEW_IDENTIFIER =
* SECONDARY_RECORD =
IMPORTING
return = return1
* KEY =
Hope this will be useful
Regards
Srinivas
Edited by: sanasrinivas on Feb 13, 2012 12:28 PM -
Error:The node does not contain any elements
Hi Experts,
I am getting this error.
The following error text was processed in the system SR6 : The node does not contain any elements. COMPONENTCONTROLLER.1.ROADMAP
The error occurred on the application server server6_SR6_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISEELEMENT_NOT_FOUND of program CL_WDR_CONTEXT_NODE===========CP
Method: IF_WD_CONTEXT_NODE~SET_STATIC_ATTRIBUTES of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: WDDOINIT of program /1BCWDY/G25NECI0LTPP66VI3KOI==CP
Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/G25NECI0LTPP66VI3KOI==CP
Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP
Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
What is the problem here?
Thank you.
Lalitha.(Assuming you have created elements for node...)
Definitely it is cardinality problem, please check that... Try to understand below points to avoid such error.
When a node is created in the context of a Web Dynpro component, the cardinality of the node is specified. The cardinality defines how often a node is to be instantiated at runtime u2013 that is, how many elements of this node are available at runtime.
u2022 1u20261 Only one element is instantiated.
u2022 0u20261 At runtime, no more than one element is instantiated, but it is also possible that no element is instantiated.
u2022 1u2026n n elements can be instantiated, but at least one element must be instantiated.
u2022 0u2026n The number of instantiated elements of the context node can vary.
The cardinalities 0..n and 1..n correspond to the declaration of an internal table. The cardinality 1..1 corresponds to the declaration of a structure.
Thanks,
Swanand. -
Unable to load the EJB module. DeploymentContext does not contain any EJB.
I'm writing an enterprise application to familiarize myself with Glassfish 3.1.2 and EJB 3.1. I've created several local, stateless beans, and injected one into a JSF managed bean. The ejb and web modules compile fine, but when I launch the application with Glassfish I get the following startup error and the application does not deploy. I don't understand what it means, can someone ellaborate?
SEVERE: Exception while invoking class org.glassfish.ejb.startup.EjbDeployer prepare method
SEVERE: Exception while invoking class org.glassfish.javaee.full.deployment.EarDeployer prepare method
SEVERE: Exception while preparing the app
SEVERE: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
org.glassfish.deployment.common.DeploymentException: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
at org.glassfish.javaee.full.deployment.EarDeployer.prepare(EarDeployer.java:166)
at com.sun.enterprise.v3.server.ApplicationLifecycle.prepareModule(ApplicationLifecycle.java:871)
at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:410)
at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:389)
at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:348)
at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:363)
at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1085)
at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:95)
at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1291)
at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1259)
at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:461)
at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:212)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:117)
at com.sun.enterprise.v3.services.impl.ContainerMapper$Hk2DispatcherCallable.call(ContainerMapper.java:354)
at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:860)
at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:757)
at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1056)
at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:229)
at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
at java.lang.Thread.run(Thread.java:722)My guess is that you deployed an ejb without bean in it. when you have an ejb module, be sure you have at least one bean present.
Are you sure you have implementend some beans? Or did you do this only in the web module?
Try adding an @Stateless bean doing nothing in you ejb module, redeploy and let me know if that works -
File Screening Audit Report does not contain any data : report statistics is empty
Hi ,
I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008.
I am getting details of file screen audit in Event log , But incident report file screen audit report does not contain any value.
Getting report for each incident of file screen audit , But it does not contain any data in report statistics.
Data available in scheduled report of file screen audit.. not available in incident report only..
Please assist...
Thanks,
Vasanth.M
Thanks, Vasanth.M.Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
technet library :
https://technet.microsoft.com/en-us/library/cc754540.aspx
Carlo -
Get an Error window, The source folder does not contain any supported camera raw files
I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
EstherHello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.
-
Error msg after scan "ADF does not contain any pages"
HP office jet 6600 has worked well for months, but recently 3 out of 5 times that I tried to scan from the ADF, whether one page or many, the scanner runs through its cycle and then gives me the following error: “The scanner automatic document feeder (ADF) does not contain any pages. Insert the pages to be scanned into the ADF and try again.”
Sometimes I just run it again and it works. I'm using HP scan that came with the 6600 download full driver package; running Windows 7 64-bit. I use the scanner significantly and it has operated perfectly for over a year and I haven't changed anything that I know of.Appreciate any help that somebody can give me… I have cleaned rulers and "flicked the little white thing", and some of the other things that were mentioned for similar problems.Hello I would be happy to help you with the automatic document feeder (ADF) issue you are having with the Officejet 6600. Even though it's a different issue this document has several steps you can try; Vertical Bands, Lines, or Streaks in Copies, Faxes, or Scans. I've copied the applicable steps here for you. Clean the scanner glass and scanner lid If the scanner glass or the white underside of the lid has fingerprints, smudges, lint, dust, or other debris, this can slow performance and affect copy and scan quality. To resolve this issue, clean the product.Before you begin, gather the following materials:Several clean, soft, lint-free clothsMild glass cleaner
CAUTION:Use only glass cleaner to clean the scanner glass. Do not use cleaners that contain abrasives, acetone, benzene, or carbon tetrachloride. These substances can damage the product. Avoid isopropyl alcohol (rubbing alcohol) because it can leave streaks on the glass.Press the Power button () to turn off the product.Disconnect the power cord from the rear of the product.Lift the scanner lid.
Figure : Lift the scanner lid
Spray a clean, soft, lint-free cloth with mild glass cleaner.
CAUTION:To protect the scanner, do not spray the glass cleaner directly on the glass.Clean the scanner glass, and the glass strip next to the scanner glass, with the lint-free cloth.
Figure : Clean the scanner glass and the glass strip
Clean the white underside of the scanner lid.
Figure : The underside of the scanner lid
Dry the scanner glass and the glass strip thoroughly with a clean, dry cloth or chamois to prevent spotting, and then dry the white underside of the scanner lid.
NOTE:Do not use paper-based wipes or tissues that can leave fiber residue.Close the scanner lid.Reconnect the power cord to the rear of the product.If the product does not turn on by itself, press the Power button () to turn it on.Try to copy, fax, or scan again.If these steps resolved the issue, you do not need to continue troubleshooting.If the issue persists, continue to the next solution.
Clean the automatic document feeder (ADF)
Follow these steps to clean the automatic document feeder (ADF), and then make blank copies to check if the issue is resolved.Step one: Clean the ADF rollers and separator padFollow these steps to clean the automatic document feeder (ADF).Gather the following materials:A clean, lint-free cloth, or any cloth that will not come apart or leave fibersDistilled, filtered, or bottled water (tap water might damage the product)Remove any originals from the document feeder tray.
Figure : Remove any originalsPress the Power button () to turn off the product.Disconnect the power cord from the rear of the product.Lift the cover of the ADF until it stops.
Figure : Lift the ADF cover
Locate the pick rollers and the separator pad.
Figure : Locations of the pick rollers and the separator pad
The ADF coverThe pick rollersThe separator padLightly dampen a clean lint-free cloth with distilled or bottled water, and then squeeze any excess liquid from the cloth.Use the damp cloth to wipe any residue off of the separator pad.
Figure : The separator pad
Use the damp cloth to wipe any residue off of the pick rollers.
Figure :
Dry the rollers and the separator pad with a clean, dry, lint-free cloth.Do not close the ADF cover. Continue to the next step to clean the glass strip in the automatic document feeder.
Clean the glass strip in the automatic document feeder
Follow these steps to clean the glass strip underneath the mechanism in the automatic document feeder (ADF).
NOTE:The images in this step might not be of your product, but the steps are the same.If you have not done so already, disconnect the power cord from the rear of the product.Remove any originals from the document feeder tray.
Figure : Remove any originals
Open the ADF cover, and then lift the ADF mechanism.
Figure : Lift the ADF mechanism
Lightly dampen a clean, soft, lint-free cloth with a mild glass cleaner.Gently clean the glass strip inside the ADF, and then thoroughly dry it to prevent spotting.
Figure : Clean the glass strip
Lower the ADF mechanism back into place, and then close the ADF cover.Step three: Make a blank copy using the scannerFollow these steps to make a blank copy using the scanner.Lift the scanner lid.Figure : Lift the scanner lidRemove any originals from the scanner glass.Close the scanner lid.Load unused, plain white paper into the input tray.From the home screen on the product control panel, touch Copy ().Touch Start Black to start the copy.If the copy is clean, continue to the next step to make a copy using the ADF.If the copy has vertical bands, lines, or streaks, there might be dust inside the product, poor internal connections, or the product might be damaged. Please let me know if these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks, -
External Library DC does not contain any archives for deployment
Hi Experts,
I am currently trying to deploy an external library dc with the required external jars for an EP application.
However, I am getting the following message when deploying the DC:
DC dc_lib does not contain any archives for deployment
I have already created the public parts and added the necessary jars to the assembly and compilation PPs. I have followed the link below:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/006a6229-b1ed-2e10-0c8c-cc5673cf268f?QuickLink=index&…
May I know if there's anything I have missed?
Regards,
Gregi deployed both, ear dc successfully deployed but lib dc has the warning above.
upon checking portal it has exception:
portalRuntimeException: There is no portal component associated with the following context. -
We have our server set to backup to an internal HDD (E:), and then copy all the files in E: to different locations for storage (a NAS for instance). I scheduled a copy to a USB drive, but I can't get the recovery wizard to see the backup it now contains.
I choose "A backup stored in another location" and then "Remote shared folder", as the USB (G:) does not show up in Local drives. I now need to enter a UNC (it won't accept the "G:\" path), so I shared the USB drive and
enter "\\SERVER\G\2014-09-23", which is the path to the parent of the WindowsImageBackup folder on the USB drive. At this point I get the above error "The backup location does specified does not contain any backup"
All the files look to have copied OK, and have the same Date Modified as on the server: as far as I can tell it's identical, and yet it won't mount. Help?Hi,
I would like to confirm the exact backup process:
When creating the backup, are you choosing "local drives" and then "G:", or Remote shared folder and then \\server\g\folder?
If it is a network path, could you restore it with \\server\g\folder instead?
If you have any feedback on our support, please send to [email protected] -
Request does not contain any saved update rules; rollback not possible
Hi,
In BW on hana, there's a 3.x flow DSO where it loaded a request from PSA.
It failed due to activation error SID Generation. But unfortunately, due to PSA Deletion process chain, it's PSA Request got deleted.
Now, we couldn't delete the red request(failed request) from the 3.x flow DSO.
If we try to delete, it shows job has been completed successfully with the following message:
Job started
Step 001 started (program RSDELPART1, variant &0000000004233, user ID )
Delete running: DataStore object ZREBATE, from 630,138 to 630,138
Delete is scheduled; Selection conditions were substituted
Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
Job finished
I went to the table RSICCONT and checked the mentioned request. But I couldn't find delete option enabled. Even our basis team doesn't have authorization to delete the mentioned request from the standard table RSICCONT.
Request you to please help me how to handle this.
Regards,
Antony Jerald.Hi Antony,
Once you have deleted the data in PSA there is no way to reconstruct the request hence you can do below things to correct it
1) Identify the No of Records which having error , because if you have more records it will take more time as in debug mode we have option to edit only one record at one.
2) Display only one record in Active table and change it using the Debug option ( not recommended ), but as you are in corner we need to use this
3) change the records with respective values and active the request again
Regards
Jagan -
Context binding of property value cannot be resolved. not contain any eleme
I have a binding of a inputelment to a context element. the context can be empty. when it is empty it throws the error only when i have that binding. I thougt its not interesting for an inputfield to have a value or?
Following error occurs: The following error text was processed in the system DBW : Adapter error in &VIEW_ELEMENT_TYPE& "ZPM_PROJ" of view "ZPM_MD_PMON.STARTVIEW": Context binding of property VALUE cannot be resolved: Node STARTVIEW.1.PROJ does not contain any elementsHi,
The thing is that you're trying to access node which might be from 0 to 1 or n records (cardinality). And at runtime point you have 0 records with 0 elements. That's why you have problem.
There might be something wrong with logic how you trying to display some data in your text fields.
At runtime there is no context element from which system could take values.
Or you have to change parent node cardinality to 1..1 if that meets logic or review your logic. -
Dump showing that table does not contain any elements.
Hi All,
I have a table, with lead select.Based on the row selected, corresponding values of the row are filled in the input fields.
I filter the table and only those rows are displayed which has status "waiting". Now the problem is when there is only one row with status "waiting", and process it, its status changes to "done", as a result of which there is no row in the table, and i get following error:
Adapter error in INPUT_FIELD "IF_STATUS" of view "ZPWB.DISTRIBUTE_VIEW": Context binding for property VALUE cannot be resolved: The DISTRIBUTE_VIEW.1.PD_ITEMS_TAB node does not contain any elements
Can you please help out:)I have now the same problem.
somebody found out what the solution is for that issue?
if i have an empty context i get a dump due to the context binding. what is the work around?
Maybe you are looking for
-
Multiple remote debugger connections from JDev
Hello, I'm running JDev Studio Edition Version 11.1.2.3.0 I need to debug an application running on a 2 node WLS Cluster. I have the two servers running in debug mode listening on different hosts/ports. In JDev I click the debug button twice and open
-
All menu letters are boxed As - system font missing?
I have this same problem and no one has a solution other than a full reinstall??? At some point last night, while I was working on my 10.4.9 PowerMac G4, something happened and my menu fonts all turned into some glyph that looks like a capital "A" in
-
EL in jtls tag attributes?
I keep getting an exception when I try to use an expression in a jstl tag attribute and I don't understand why. I'm new to jstl, but everywhere I look online people are using these expressions just like I'm trying to. In fact, if I'm not mistaken, th
-
I have ended a video with simple credits: white Gill Sans lettering on a black background. These titles show on the computer as crisply and vividly as I had intended. When I create a DVD and play it on the computer, they are still crisp white-on-blac
-
HT6001 "BtITunes PlugIn Dll has stopped working" How to solve that issue Pls?
BtITunes PlugIn Dll has stopped working how to solve that issue pls