ContextMenu Not Displayed in Tree Which is added in popup.

I have created popup. and added tree in it. Tree has a userdefined contextMenu.But when i right click on item in tree the contextMenu is not displayed.

Hello,
  As per ADOBE docs, context menu works for top level components and not with the child components.
  Thats why u r not getting context menu in the tree, as its now the child of title window.
please checkout this link,
http://stackoverflow.com/questions/5382159/flex-custom-context-menu-for-a-component
Thanks and Regards,
Kanchan Ladwani | [email protected] | www.infocepts.com

Similar Messages

  • Role not displayed in tree

    Hi
    I have a case where, in an org unit, roles are assigned to users and depending on the role, a user is allowed to perform certain activities on the system. The dir tree is shown below. This is a case where activities allowed for a role can change depending on the OU the user is operating on.
    org unit
    |
    |-- user (role via nsroledn)
    |
    |-- role (managed role)
    |
    |-- activity (my custom objectclass)
    So I have created Managed roles and assigned them to users using the nsRoledn attrib. The activity is created using my custom OC. I have not yet looked at CoS. This is working fine. All the entries are added through JNDI based code.
    I have one problem. When I try to look at the activity entry from the console, I am unable to do so. i.e. the role entry appears only on the right pane in the console although it has some leaf activities. When I add an activity to the role from the the console, then the role also appears in the left pane and I can see the leaf activity in the right pane. Any ideas why this is so??
    Also is it ok to add activity leaves to the role entry as I'm doing??
    Finally, can I use CoS (class of service) for this purpose? If so can somebody provide basic startup steps!!
    regards
    Sikka

    vinay sikka wrote:
    Hi
    I have a case where, in an org unit, roles are assigned to users and
    depending on the role, a user is allowed to perform certain activities
    on the system. The dir tree is shown below. This is a case where
    activities allowed for a role can change depending on the OU the user
    is operating on.
    org unit
    |
    |-- user (role via nsroledn)
    |
    |-- role (managed role)
    |
    |-- activity (my custom objectclass)
    So I have created Managed roles and assigned them to users using the
    nsRoledn attrib. The activity is created using my custom OC. I have
    not yet looked at CoS. This is working fine. All the entries are added
    through JNDI based code.
    I have one problem. When I try to look at the activity entry from the
    console, I am unable to do so. i.e. the role entry appears only on the
    right pane in the console although it has some leaf activities. When I
    add an activity to the role from the the console, then the role also
    appears in the left pane and I can see the leaf activity in the right
    pane. Any ideas why this is so??I'm not sure. Is the activity entry a child of the role entry? You should not do this. I'm not sure what you are trying to do
    here. Why can't the activity entry be a direct child of the org unit entry? Or some other container entry?
    Role entries (and cos definition entries too) should not be used as containers or parents of other entries. Roles and CoS use a
    special objectclass called ldapSubEntry - this in effect makes the entry an "operational" entry - a special entry which does not
    show up in regular ldap searches. The console knows how to find role and cos definition entries, but not their children.
    >
    >
    Also is it ok to add activity leaves to the role entry as I'm doing??
    Finally, can I use CoS (class of service) for this purpose? If so can
    somebody provide basic startup steps!!
    regards
    Sikka
    Try our New Web Based Forum at http://softwareforum.sun.com
    Includes Access to our Product Knowledge Base!

  • SQL Developer 1.1 Query Builder does not display connection tree

    I have installed SQL Developer 1.1 on a PC running Windows XP SP2. I am connecting to Oracle 9.2.0.7.0.
    After connecting to the database, I right click in the SQL Worksheet and select Query Builder and when the new window is displayed, there are no tables to select from.
    What is causing this?

    Hi Antony,
    Upgrading from SP7 to SP9 fixed a lot of problems for me! It's worth trying.
    Problems solved for me:
    Page requests take about 2 minutes to display page (now within a few seconds)
    KM SQL logging (30-50Mb per minute) problem fixed.
    There are some problems upgrading to SP9, but searching this forum will help you in finding some solutions for this
    Regards,
    Noel

  • New Questions not displaying on a page Survey App Part SharePoint 2013

    I wanted to insert a survey app part on a page in my site so i followed steps mentioned in the below link
    http://sharepoint.stackexchange.com/questions/86903/showing-only-survey-questions-in-page
    it successfully created but now when insert another question into the survey list which i created above it does not show that question onto the page it only displaying 3 questions which i added when i was creating a survey list
    can anyone help me in showing new question as well.

    Hi ,
    Please re-insert the list new item form web part on that page as your above article mentioned steps, then check results again.
    Thanks
    Daniel Yang
    TechNet Community Support

  • The Japanese file name is not displayed.

    I'm using Mac OS 10.5.3(intel)/Adobe Media Player 1.0
    In "Personal Videos",The Japanese file name is not displayed.
    Example, "日本語.flv" is added, ".flv" is displayed in "Personal Videos".

    Thank you for reply.
    >Try this: Go to the Apple menu > System preferences > International > Languages. Add Japanese to the list of languages, if it does not appear there already. If you drag Japanese above English in the list, the finder and many other applications will open next time with Japanese menus. Even if you do not want Japanese menus, make sure Japanese appears somewhere in your list of languages. Just having it there unlocks Japanese features in certain software, like Japanese encoding in Apple's Mail application.
    When trying, the problem was not improved.
    >If the Japanese menus make things hard for you in certain applications, you can set the language of specific applications individually using the following method: First, select the application's icon in the finder and choose "Get Info"from the File menu.
    >
    >Expand the Languages section of the Get Info window, and you'll see the languages available for the application. If you check Japanese and uncheck English, you will get Japanese menus; if you check English and uncheck Japanese, you'll get English menus. If both are checked, the language is determined by the order of languages in the International Preferences Pane.
    In "Get Info" of the application based on Adobe AIR, "Languages section" is not found.

  • Site not displaying properly in IE

    Hello,
    I'm working on building a site from a template. Prior to today I only  opened the site in Firefox and it displays fine. However, in IE for some  reason every page besides the index.html do not display properly. The  weird thing is, the part that is messed up should be the same as the  index.html because they're from the same template.
    Does anyone happen to know what I messed up?
    Here is the site...
    http://testtreks.onlinewebshop.net/index.html

    I'm working on building a site from a template. Prior to today I only  opened the site in Firefox and it displays fine. However, in IE for some  reason every page besides the index.html do not display properly.
    Which IE?  What does "do not display properly" mean?  It looks OK to me in IE8.

  • Help with displaying a tree...

    Hello,
    I created a window program that displays some data in a tree structure. I have two versions of the program. One that works and one that doesn't. The one that does, builds the tree in the constructor method of my window class, creates a scrollPane for it, and adds the scrollPane to the window. Again, this version displays the tree fine.
    The second version, what I want to accomplish is load the tree when a button is pressed. When the button is pressed, I execute exactly the same steps that I do in the constructor but now these steps are in the actionPerformed method associated to the button. The thing is that the program does not display the tree. I have tried the repaint methods at the contentPane level, at the tree level, reloading the treeModel, but cannot get the tree to show. I would very appreciate any ideas on this...
    Thanks
    Antonio

    Hey...
    Thanks for the tip...that did the trick. What does the validate() method do exactly? The documentation doesn't say much....Thanks again...
    Antonio

  • Called DID not displayed

    Dear Cisco community,
    we are using a SIP trunk with 5 DIDs. Is there a way to see the line (DID) that has been called on the display of a SPA 303? We can only see the caller ID (twice, one line with +44 as prefix and a second line with 9xxxx). Routing, call hunting, shared extensions and everything else works perfectly.
    I really hope that this is possible, we need to be able to see which inbound line (DID) has been called to answer the call correctly.
    Thanks for your help!
    Sebastian

    Hi Sabastian,
    The phone LCD only displays the caller ID, who is calling. It can not display the number which is called.
    You can click "Add Specified Number" to add DIDs on "Inbound Calls" page of the configuration utility, then select the different routing destinations for the different DIDs, so that you can answer the call correctly for the different DIDs being called.
    Hope it helps.
    Best regards,
    Wendy Yang

  • Canvas not displaying controls added with addChild

    I have a custom class holding some information, a property in
    the class is an XML string and another method parses the XML add
    creates controls (labels and buttons) based on the xml. I also have
    a variable named renderer which is a mx.containers.Canvas. After
    the XML is loaded and the controls are added using
    Canvas.addChild() I add the Canvas to my stage. The problem I'm
    running into is that even though the Canvas is added to the stage,
    I cannot see any of the controls inside of the canvas. Doing a
    trace(Canvas.numChildren()); I can see that I have added 101
    children to my canvas container (which is what my xml file shows)
    however they will not display. I know the canvas has been added to
    the stage because I can see the scroll bars when i set the policies
    to "on" and it even sets the scroll bars correctly if the
    components are too big for the canvas and would have to be scrolled
    down to see them all, it just doesn't show any of the components.
    Anyone run into a similar issue?

    Did you set an explicit width and height (or percentWidth and
    percentHeight, or styles top, left, top, bottom) on the controls
    you create? By default controls have 0x0 size. Creating controls in
    MXML causes additional code to be generated which gives the
    controls default sizes, but it won't happen in your own
    ActionScript code.

  • Added DataSource not in JNDI tree; WLS6.1SP1

    I have added a new DataSource, but I don't see it in the JNDI tree? I have restarted the server after adding. (BTW if I check the examples server, not every name is in the JNDI tree either?! eg. examples-dataSource-demoPool is not in the tree; but examples-dataSource-demoXAPool is in the tree)
    If possible please also reply to my email address... [email protected]

    Thanks for your suggestion. I did this after adding the pool. I should have mentioned
    this in my first post.
    I have tried again to add a ConnectionPool and a DataSource: to my supprise it
    was in the JNDI tree. So everything seemed OK now, but read on...
    Because I couldn't access other PC's in my network (Weblogic is installed on my
    laptop, which I used during the day without network connection) I rebooted my
    laptop and the JNDI name was gone??? Must be something with IP addresses or so.
    I will investigate and reply when I have figured it out.
    Deepak Vohra <[email protected]> wrote:
    Ben
    Set the Targets Server.
    Click on JDBC node. Click on Data Sources Node. Click on the DataSource
    node. click on Targets tab. Choose a Targets Server. click Apply. The
    added DataSource should get a JNDI binding.
    Deepak
    Ben Verloop wrote:
    I have added a new DataSource, but I don't see it in the JNDI tree?I have restarted the server after adding. (BTW if I check the examples
    server, not every name is in the JNDI tree either?! eg. examples-dataSource-demoPool
    is not in the tree; but examples-dataSource-demoXAPool is in the tree)
    If possible please also reply to my email address... [email protected]

  • Column not displaying after added by personalization in Advance table

    Hi,
    I am working in Upgradation project from 11i to R12. I saw that the personalization have alredy migrated in the R12 instance. However these personalization are not displaying in Advance tabel in R12. these are the 4 custom columns which are already present and displaying in 11i. But these are not displaying in R12. I have check Functiona administrator that the personalization are not deactivated. Have checked that rendered property is TRUE for that personalization. I have also checked .xml file from list customization and print document -- jdr_utils...but the files are same in 11i and R12.   I have added a custom column by personalizatio but this column also not displaying. Can you please take a light on this issue...I will be highly thankful to you?
    Thanks
    Vikram

    Hi Vikram,
    Check 4 Custom Attribute is available or not in Translatable Items of Particular Page   Via About This Page link.
    If attribute available  then Please do Re-personalization only in R12 for 4 custom column.
    Otherwise  You need to do VO Extension Again in R12.
    Thanks,
    Dilip

  • CL20N can not display added fields in the search result ?

    Hi,
    In needs of displaying storage location for each material in the transaction CL30N , we use the user exit CLCLRS01 and CLCLRS02 to add new field. But after that the added field is not displayed
    Have you ever tried this ?
    thanks

    Hi,
    Please find below the code for adding the fields. This code is present in the FM 'EXIT_SAPLCLRS_001'.
    If the field added is from database, then the field needs to be added in table 'LT_ONLY_THIS_FIELDS'(see below FM). Else, the fields needs to be added in the table 'ET_FIELDS' as shown below.
          CALL FUNCTION 'CLRS_GET_FIELDS_OF_STRUCTURE'
               EXPORTING
                    I_STRUCTURE         = 'MARC'
                    I_LANGUAGE          = I_LANGUAGE
               TABLES
                    IT_ONLY_THIS_FIELDS = LT_ONLY_THIS_FIELDS
            IT_EXCLUDE_FIELDS   =
                    ET_FIELDS           = ET_FIELDS
                    ET_FIELDS_TEXT      = ET_FIELDS_TEXT.
          CALL FUNCTION 'CLRS_GET_FIELDS_OF_STRUCTURE'
               EXPORTING
                    I_STRUCTURE         = 'DRAW'
                    I_LANGUAGE          = I_LANGUAGE
                    I_FIRST_CALL        = 'X'
               TABLES
                    IT_ONLY_THIS_FIELDS = LT_ONLY_THIS_FIELDS
            IT_EXCLUDE_FIELDS   =
                    ET_FIELDS           = ET_FIELDS
                    ET_FIELDS_TEXT      = ET_FIELDS_TEXT.
      ENDCASE.
    Here a field which are not from a database table is added
      ET_FIELDS-FIELDNAME = 'JUST_TEST'.
      ET_FIELDS-GROUPKEY  = 'C'.
      ET_FIELDS-DATATYPE  = 'NUM'.
      ET_FIELDS-LENGTH    = 2.
      ET_FIELDS-DECIMALS  = 0.
      APPEND ET_FIELDS.
    Regards,
    Rajesh

  • Tree with multiple root nodes does not display

    I am trying to create a tree to display some hierarchical data which contains several root nodes.
    I have specifed that the TREE_ROOT value is always Null as the root nodes have a null value for the PARENT_ID. The page displays yet none of the data is displayed.
    I have manage to get it to work by creating a dummy single root that I reference from the existing root values?

    Phattam,
    The TREE_ROOT identifies the root node's ID, not its PARENT_ID.
    For example, if we build a tree on the oehr_employees table, the ID is EMPLOYEE_ID and the PARENT_ID is MANAGER_ID. therefore, to identify the start of the tree, we could populate the TREE_ROOT with a select statement e.g.
    SELECT employee_id FROM oehr_employees WHERE employee_id = 100This identifies a single value and the tree starts from employee_id 100.
    If we used a select statement that retrieves more than one row, e.g.
    SELECT employee_id FROM oehr_employees WHERE manager_id = 100then the tree starts at one of the children of employee_id 100 - ApEx will not show a tree that has more than one starting node. If you want to show these alternative starting points, you'll need to do exactly what you have done - create a 'dummy' root node.
    Hope this helps,
    Bryan.

  • Values not getting displayed for members which doesnt have parents

    Hi
    I created a product dimension with 4 levels .For members which doesnt have parents,data is not getting displayed in JavaClient.
    The values for members which doesnt have parents are getting displayed in the view created for the measures which are dimensioned by Product .I mapped the same view in the CWM2 work space ,but value is not getting displayed for members which doesnt have parents ,but values are getting displayed for members which have parents for measures.
    Is it a bug , we were able to do it in Express ..
    Can anybody help us in doing this.??
    Thnx in Advance......

    Hi,
    This assumes that the members which do not have parents are mapped to the top level in the hierarchy. If they are at a level below the top level then they are not part of the hierarchy and therefore would not be displayed. So this sounds like expected behaviour.
    Hope this helps
    BI Beans PM Team
    Oracle

  • The text which is in text node is not displaying in output in smartforms

    Hi,
      In smartforms i created a text node and entered some text like following.
         Target Quantity               60000001     60000002          
         Scheduled Quantity               60000003     60000004               
         So far delivered Quantity          60000005     60000006
         Last delivered Quantity          60000007     60000008
          Delivery Schedule Details
    the text which i entered as above in the text node is not displaying.It is in main area.

    Hi
    if u are using table or template inside the main window
    then just mention the position of the text element
    goto text element - output options- output structure tab----give line and column no.
    Thanks
    krushna

Maybe you are looking for