Contextual event producer not listed as in the event map

Hi
There is a taskflow A containing a pagedef which raises a contextual event. Taskflow A resides in Taskflow B.
Consumer page has Taskflow B dropped as a region and also has a handler method to subscribe to the event. While trying to create an event map in the consumer's page def, I do not see the Taskflow B listed as a producer in the editor. Thus, I am not able to specify the relative path in the producer of the event map.
If I add wildcard as a producer , the event gets subscribed but I would like to make use of the relative path to the producer instead.
Any idea how to go about it?
Thanks.

I have seen in some tutorial videos where the wiki object updates while on the editing board. I do not have this effect - and when previewing the object still has no content.!!
I have tried both ways using an article url or a keyword.
As you can see the twitter tab does not appear on the events list.
I am running Firefox 32.0.3 as a browser on a Linux OS (LinuxMint15)
thanks for your interest in the matter

Similar Messages

"The 'charCode' property of a keyup event should not be used. The value is meaningless." Is this possibly caused by a virus?

I don't know what's wrong with my Mac Mozilla Firefox, version 3.6.8, but today, it started alerting me about an error message on the "Error Console". In every website I visit, it tells me: "The 'charCode' property of a keyup event should not be used. The value is meaningless." Is this possibly caused by a virus?
I saw a pop-up which did not allow me to click it when I scatter the windows on my Mac. I was using Private Browsing, with pop-ups disabled, but one pop-up managed to get passed my settings, and open in another window. It would not allow me to select it, so all I did was to close Firefox, and start a new session. So far, everything has been normal, I also deleted the cookies it installed.
But, I still keep seeing that "Error Console" notice under my "Tools" on the Menu Bar, and when I clicked on it, it listed errors (such as what I listed above).
Would someone explain this to me?
Thanks for your help!

The messages you see in the Error Console are mostly to assist the web site's author in resolving compatibility problems. Some of them can assist you in determining why a web site doesn't work as intended. The one you mentioned doesn't sound that suspicious, except that it occurs on many sites. Perhaps one of your add-ons is trying to monitor what you type?
To diagnose whether this is caused by an add-on or one of your settings, you could try the following:
First, make a backup of your computer for safekeeping. To back up Firefox, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
Next, try starting Firefox in Firefox
[http://support.mozilla.com/kb/Safe+Mode Safe Mode]. Be careful not to "reset" anything permanently if you didn't back up.
Does that resolve the errors? If so, then an add-on usually is the culprit. If not, try creating a new (blank) profile: [http://support.mozilla.com/kb/Managing+profiles Managing profiles].
If the new profile works correctly, you can choose between further research on your old profile or moving key settings like bookmarks from your old profile to the new one. [https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile].
Hope this helps.

How can I remove "invitations" from a shared iCloud calendar when I am not actually invited to the event?

How can I remove invitations from a shared iCloud calendar when I am not actually invited to the event?
My wife and I share our calendars and she uses it very frequently. Every time she enters a new event on her calendar I get a notice (invitation?) in the Calendar app, even though I am not invited to the event she created.
I would like to continue being able to share our calendars but I do not want the hassle of an Invitation popping up every time she enters an event.
Thanks!

You can sync photos and itunes content with one and only one computer at a time. When you sync to another, it will erase the current content and replace with content from the new computer.

After transferring clips to Final Cut, they do not show up in the events library. They show up in the timeline of my project, though. how can I see then in the events browser?

After importing clips to Final Cut, they do not show up in the events library. Events from 2014 show up, but not 2015.They show up in the timeline of my project, though. How can I see them in the events browser?

TThose aren't bins. Those are just groupings based on when the content was created or any other selected parameter. Use the action popup in the toolbar tho change the setting.

My internal drive is NOT showing up in the event library in Final Cut X. I am also getting a "The operation couldn't be completed. Cannot allocate memory" Any ideas? I am using an IMAC Core i7 with 8GB memory, OS version 10.6.8

My internal boot drive is NOT showing up in the Event Library in Final Cut X. My external raid drive is showing up.
I am also getting error message "The operation couldn’t be completed. Cannot allocate memory" when attempting to create a new "event". Any ideas?
If I had a application disk, I would unistall and reinstall FCPX. I am assuming there is a way do do this without a disk - just have not been able to easliy find out how.
I am using an IMAC Core i7 with 8GB memory, OS version 10.6.8
Thanks

Well it did NOT work. Here is a screen capture as FCPX loads showing the drive while it loads. Then when it is loaded, NO drive showing up in the Event Library ( I have turned off the external drive).
ANY ideas . . . . Anybody . . . . APPLE?

Compound clip imported into project not showing up in the event browser

I have learnt that when one imports any clip into the project from anywhere else other than its associated event folder, the new clip also gets automatically added into the event folder. I have seen this occur when I had imported audio from the music browser onto my timeline directly.
Today I happened to place a compound clip [a common template which I use for introduction to the video] onto the beginning of a project which I have started recently. I broke the compound clip apart and made the necessary edits. What puzzles me is that this compound clip has an audio clip and this clip was not being shown in the event browser. Is this normal?
Ps. I have very recently updated my FCPX from version 2 to 5.
DR.SOMANNA

Let me explain the matter in a different way...
I have made a compound clip of the intitial generator clip, titles and music clip which I had used for my first project. The intention to do so being that I could reuse the same for my future projects as well. I placed this compound clip in a new project which I named as templates.
When I had started upon a new project a few days ago, I copied and pasted this compound clip from the 'templates project' and added it to the beginning of the timeline of the new project.
Now, for purposes of editing the titles, I broke apart the compound clip and changed the text of the titles. Also, when I had ungrouped the compound clip, there did appear the music clip below the timeline. I know that clips imported from the generator browser and the titles that are added to the project do not show up in the events browser, but should not the audio clip make its appearance in the event browser? I know that when we add an audio from the music browser, this audio clip will be automatically shown in the event browser.
My question therefore is this: is an audio track that gets added to the timeline of a project via a compound clip that has been added and ungrouped on the timeline an exception to the rule?
Hope I have made myself clear.
DR.SOMANNA

I am using version iPhoto'11. Since I installed this version I experience some difficulties. After importation of pictures I can see the pictures under Library/Pictures but not under Library/Events. However I can see the event and the number of pictures.

Hello,
I am using version iPhoto'11. Since I installed this version I experience some difficulties. After importation of pictures I can see the pictures under Library/Pictures but not under Library/Events. However I can see the event with the event title, the number of pictures and the pictures itselve as small thumbnails. BUt ounce I want to open the event to see the pictures in full screen the event title annouces 0 pictures and no pictures are visble anymore to mee. I have checked if the pictures are marked as hidden and this is not the case. What's going wrong. All the other events are visible in a normal way.
The albums with the same pictures into them are visible.
Thanks for your help,
Raf

Make a temporary, duplicate copy of the library and try the two fixes below in order as needed:
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
2 - delete iPhoto's cache files that are located in your Home/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select options #1, #2 and #6.
Click to view image full size
OT

SCOM2012 R2 The Data Access service is either not running or not yet initialized check the event log

Can U guys tell me the solution of it i am using scom 2012 R2 with sql server 2012 High availability solution
Failed to connect to server
The Data Access service is either not running or not yet initialized check the event log
Date: 5/6/2014 5:27:49 PM
Application: Operations Manager
Application Version: 7.1.10226.0
Severity: Error
Message: Failed to connect to server 'PPLKHIHOV23.ppl.com.pk'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to
net.tcp://pplkhihov23.ppl.com.pk:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0020292. TCP error code 10061: No connection could be made because the target machine actively refused it 172.16.0.107:5724. ---> System.Net.Sockets.SocketException:
No connection could be made because the target machine actively refused it 172.16.0.107:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
   at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://pplkhihov23.ppl.com.pk:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0020292. TCP error code 10061: No connection could be made because the target
machine actively refused it 172.16.0.107:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 172.16.0.107:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 172.16.0.107:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)

Get "System Center Data Access Service" is running Automatic not manual and verify that SQL server is running and connectivity between SCOM and SQL is up and not slow for any application run on background.
To make sure that no application take utilize connectivity between SQL and SCOM. Try to restart SQL and SCOM and check again.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

WARNING : CAN NOT ALLOCATE BLOCK FOR THE EVENT !

Im developing a packet filtering program on Solaris 2.6. When program is executed for a while this warning message appreas :
WARNING : CAN NOT ALLOCATE BLOCK FOR THE EVENT !
and screen gets frozen,
if please somebody knows when and why this message appears, please help...
Thanks in advance,
emre celebi
[email protected]

Im developing a packet filtering program on Solaris 2.6. When program is executed for a while this warning message appreas :
WARNING : CAN NOT ALLOCATE BLOCK FOR THE EVENT !
and screen gets frozen,
if please somebody knows when and why this message appears, please help...
Thanks in advance,
emre celebi
[email protected]

Trying to get ESN off of iPad but iTunes on my laptop does not list devices in the left hand column

I am trying to get my ESN off of my iPad but iTunes on my laptop does not list Devices in the left hand column

i am not sure the pad will have an esn. that is a phone based system that is being replaced by the meid number. Can you find that?
Just out of curiosity, what do you need the esn for?

Why do iCal timed events have date written in in the event?

iCal. If I add an event ("New Event") that is an timed event (does not happen with "all day" events) it has the date of the event after the time.
for instance, a meeting at 8:00 AM on 9/10/08 reads "8:00 AM9/10/08 Meeting".
/Users/rrodby/Desktop/Picture 3.jpg
That makes no sense since it is on the calendar IN THAT DATE. My other 2 computers iCal doesn't do this and they are synced.
I have no idea how to get rid of this?
roger

Roger,
Try changing your System Preferences...>International>Formats>(Region:) (Dates) (Times) Customize... to your specifications.
;~)

How to not show pages in the Site Map

This is probably the easiest question of them all... but...
How do you not show pages in the site map?
It seems that by default, all pages are added to the sitemap.
Is it a case of unchecking "enabled" and checking "exclude from search results" under "More Options" on the page itself?
Or another way?

Hi David,
The "exclude from search result" will remove from the sitemap.xml "yoursite.com/sitemap.xml" and from major search engines from being picked up. If you tick this option please allow for a few hours to have the xml to reflect the changes.
"If you select this option then this web page will be excluded from the site search feature built into this system as well as from the sitemap.xml file submitted to the major search engines such as Google, Yahoo and Live."
The sitemap module found under site settings is not related to the xml file so you'll need to manually remove and insert onto your page if using this feature.
- http://kb.worldsecuresystems.com/kb/add-sitemap.html
Hope this clarifies.
-Sidney

In Thunderbird, I've created events in my calendar, but when I get a reminder (for an event), I cannot snooze or dismiss the event--I get the message "Modification Failed"

in Thunderbird, I've created events in my calendar, but when I get a reminder (for an event), I cannot snooze or dismiss the event; I get the error code "Modification_Failed"

This forum is just for Firefox support, for Thunderbird support you can ask in one of these forums:
* http://forums.mozillazine.org/viewforum.php?f=39
* http://getsatisfaction.com/mozilla_messaging

Photo sort in an event. Why, once in an event, view, sort, by title, is the event not saved that way.

Hi,
Have driven myself bonkers trying to sort this out. I'm scanning old pix, their creation date will be the date they are scanned. I put them into an event and needless to say they are all out of order. No probs, once in the event you are given the option to sort by date, title etc. So having put them in already numbered I use the sort by title. It works until you leave iphoto, when you return they are out of order, it seems to default to Date. So, I use the batch adjust to adjust date/time and it works but only seems to work if the whole of the event is done this way.
We recently celebrated our 60th B'day, pix taken on 4 different cameras, one with an incorrect date time setting have proved very difficult to sort. Despite altering the date time from the poorly set camera to achieve correct time order it will not get into order. Do you have to change every pix time in an event to get proper results? We like the way events are shown (pic) rather than the list with Albums. Also our kids bought us an Apple TV which we really like and for us ol' Duffers the pix presentation of the events is for us far more pleasing. I've read several similar threads here and it would appear I'm barking up the wrong tree as, if I've read it correctly events are always going to default to Date. Any help much appreciated.... thanks Victa

In iPhoto '11 you set the event sort under the event meno ==> sort events. Unless you have a problem it will stay thay way until you change it either using the sort events command or changing it to manual by manually moving an event (which I have accidentally done from time to time requiring me to reset my desired sort)
Your question 2 is not clear. As noted events are sorted by the oldest photo in the event
You next comment makes no sense at all
As to telling Apple how to implement their software, this is certainly not the place to do that. This is strictly a user to user forum and Apple is not here. Frankly as a consumer you need to pick products you like and use them. Do you try to tell Sony what they should do with their TVs? GM what to do with cars? Etc. if you like the product use it. Millions do and as a result of their decisions Apple is the largest company ever. If you don't like the product then don't use it. If you really are so much smarter than Apple then start your own company and put them out if business with your brilliant products
LN

List View in the event browser stopped working.

Recently I was using Final Cut pro X when it crashed, when I re-opened the application I found that List View in my event browser no longer displayed any content, filmstrip view appears to work but I had gotten quite fond of list view.
Is there a way to get it running again? I've already tried Restarting, shutting down and booting up again, taking out my external hard disk before opening FCPX then putting it back in again..

We have the same FCP X issue. Filmstrip view works, switch to List view and it shows nothing. We even tried closing in List view, then reopening, it reopens in Filmstrip. We have rebooted as well, with no effect. Anyone find a work around?

Contextual event producer not listed as in the event map

Similar Messages

Maybe you are looking for