Continual graph points updates xy graph

Hi i was wondering if there was a setting on xy plots so that it would plot all previous points, given a changing value of x and y.
Sort of like the wave form updates graph, but so that i can use both axises for values, and the x axis doesn't become the ongoing count?
It may be blatantly simple, but i'm trying to create a graph that will trace a path out with a changing x-y values, but keep a tail behind it of where it has been right back to the first point.
I also thought it might be possible to store the data in an array and feed an ever enlarging array into the graph but that seems to have out witted me, and i was wondering if there was a simpler method?
please help!!!

Found a method that is rather simple.
If you are generating the points from a changing singular numerical value then by feeding these into an array with cocatulate inputs on, then the values will simply build into two 1d arrays, updating with each new point,
a picture is attached if anyone has a similar problem.
- i knew i knew how to do this, it just didn't work the first 3 times.
John P.
Attachments:
solution.JPG ‏25 KB

Similar Messages

How do I get Firefox to check addon compatibility first, then ask me if I want to continue the Firefox update?

How do I get Firefox to check add-on compatibility first, then ask me if I want to continue the Firefox update? The update process currently only tells me that an add-on has been disable after applying the Firefox update. The Options > Advanced > Update tab switch, "Warn me if this will disable any of my add-ons", does not seem to work.

How do we check that new versions of FF are compatible with our existing Add-ons? I'm really quite over always having half of them not working after updating FF. It's very frustrating. Couldn't there be an option in the Add-ons menu that checks if they're compatible with a new version? Thanks.

Photoshop CS6: How Long Will ACR Continue to be Updated to Support New Camera Models?

I have Photoshop CS6 and do not wish to update to Photoshop CC.
I see that Panasonic have recently announced the Lumix DMC-FZ1000, and it is rumoured that a Lumix DMC-LX8 will shortly be announced.
Should either of these cameras suit, will Adobe update the ACR version available for Photoshop CS6 users, so that these camera's RAW formats are supported in Photoshop CS6, in due course?
Edit: I see that Photoshop CS6 is still available to buy from Adobe, so I would assume that the ACR version available for Photoshop CS6 will continue to be updated to support new camera RAW formats, up until a short time after CS6 is eventually discontinued?

I am having the same problems. My guess is that a lot of people are having the same problems and just living with it. Those of us who know where to go on the Internet come here to find a fix.
It seems Verizon has some explaining to do. Maybe they should try Beta testing new software a little better. I would rather have to wait longer for something that works. I am sure that some manager or director said this is close enough, deploy it and we will see what happens. Well, you are seeing the problems. Time to fix your mistake.
All of us are telling our friends about the problems. The longer this goes on, the more people we will tell about it.
Wouldn't you rather us be telling our friends that their is an error in the new interface and that you are working hard to fix it?
If you want to be up front about this, then just tell us. We are adults and can handle it. If you made a mistake, own up to it and give us some credit for doing your Beta testing in the field.
Customer Service is all about telling the truth and if you made a mistake, admit it and lets move on with a fix. I do not want to be told again that I should be able to unplug it, power cycle it, try the on-board diagnostics, etc., etc.......
I am going to be repsonding on a daily basis to keep this topic at the top of the list.
Time to come clean. You will feel better Verizon.
Let's talk tomorrow.

Sharepoint server get all Updates except share point Updates

hi
I have a sharepoint server that sharepoint 2013 has installed on that .my Update server is sccm 2012 r2 and I checked all office 2003,2007,2010,2013 product to be synchronized .every thing is good sccm work fine in synchronizing update with Microsoft.and the
share point server OS gets Updates finely .But the Problem is here that share point service doesn't get any updates .all updates deployed to OS except share Point updates.
whats the solution ?
thanx

I checked those files .but there weren't any errors .I checked them through reporting but it still says that those
Updates are not required whereas the server doesn't installed any share point Updates.
http://support2.microsoft.com/kb/2767999
A change in the package configuration was introduced after SharePoint Server 2013 was released. You must install this public update before you install later SharePoint updates.
Note This update is available only from the Download Center and is currently not available from Microsoft Update.
https://www.microsoft.com/en-us/download/details.aspx?id=36989
Due to a change in the package configuration introduced after SharePoint 2013 RTM the March Public update is a mandatory requirement in order to install subsequent SharePoint Updates.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)
thanks for reply
But before I've got another share point server 2013 and wsus server (not sccm) .that was ok with all Updates .
I didnt do any thing special in that case.like installing some hotfixes or anything else.

TS3274 iPad 2 Auto-rebooting continuously after OS update to iOS 7

My iPad 2 is auto-rebooting continuously after OS update to iOS 7 . After every reboot , it is waking up for around 20 seconds and then rebooting again with apple logo coming on the black screen . I tried switch-off/on but the problem is still there . Please tell what to do .
PS : The iOS update was completed successfully . The General>Software-Updates shows "up to date iOS 7" .

I somehow managed to restore the ipad within 20 seconds time . I erased all settings and data by General>Reset>Erase-All-Settings-And-Data (simply reset settings did not work) . Make sure you have backup of your data (on iCloud or iTunes) before doing the previous step . Thank god , now it is working fine . *** Apple !!

InDesign CC point updates reset some preferences

Today's point update to InDesign CC reset my preferences (UI reverted to black, etc). This has happened with previous updates as well. Anyone experiencing similar? Ideas on how to prevent it in the future?
Running OSX Mountain Lion w/ latest updates.

PITA for sure. See if this helps:
http://indesignsecrets.com/topic/interface-preference-not-saving

HP Ceement not working and continuous failure to update windows

I had a troouble with the screen and had it replaced to LED, and after that, it came into my notice that whenever I startup my system, the dialog box showing HP Ceement not working pops up. Also, there are options with check online for troubleshooting, but it did not work out when I tried it.
The another thing related with the issue (my guess only) is that, the original windows 7 home basic installed on the system is failing to get updated. the updates are identified and downloading also occurs. But, while installing, it always shows installation failed. This also seems to match approximately with the date in which I changed the display. So, is there any connection between the service done, and these two issues? and is there any way for me to rectify this?
I also should inform you guys, there is absolutely no other issue with the pc.
Thanks in advance,
Dileep

Hello @Dileep008,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that HP CEEment is not working and continuously fails to update Windows on your notebook computer, and I would be happy to assist you in this matter!
To rectify this situation, I recommend performing a backup and recovery of your operating system. This can be done by following the steps in this document on Backing Up Your Files (Windows 7), as well as Performing an HP system recovery (Windows 7). This should help return your system back to factory defaults.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I need timed data logging with continuous graphing

I am graphing continuous temperature measurements, but I only want to log onto a spreadsheet measurements every hour. How do I do that?

Hello,
In order to log the measurements every hour, you will want to implement a "Wait (ms)" function. This function can be added to the block diagram by [right-clicking] and selecting the following:
[All Functions] >> [Time & Dialog] >> [Wait (ms)]
You will want to place this wait function inside your code and wire a constant to the wait function with a value of 3,600,000 (60min/hr x 60sec/min x 1000ms/s). To wire a constant to the wait function, [right-click] on the input terminal of the "wait (ms)" icon and select [Create]>>[Constant].
I hope this helps. Please let me know if I can further assist you.
Kind Regards,
Joe Des Rosier
National Instruments

Usb -1208fs 8 channels continuous graph

Hi everyone! I'm working with an usb-1208fs (sinlge-ended mode, 8 channels, 2kS/s) and I want to visualize all 8 analog inputs in continuous mode. For that purpose I have changed the Xaincnbg.vi example from Universal Library to my case. It does work but not really good, because if I switch on one signal to the channel 1 I can see the signal in both windows Waveform Graph 1 and Waveform Graph 3 and vice versa. If I switch on two signals then I get visalized these signals superimposed each other.
What is wrong in my code?
I have been sitting on this problem for two days and I have no idea what is wrong.
I hope someone can help me.
Message Edited by uwlu on 08-27-2009 02:41 AM
Attachments:
usb1208fs_8_channels_cont.vi ‏240 KB

Hi uwlu,
I've taken a look at your code, but I cannot do much with it. You've only provided the main VI, but not the driver VI's. It would be usefull to share your complete project with us, so we can get a better understanding of all VI's you're using (which probably are driver VI's to your DAQ board).
Could you be a bit more specific on the problem you have and what the final result is you're expecting to see?
Regards,
Peter S

Measuring point update by production order confirmation

Hi friends,
I created a prt as equipment and assigned it to the routing. I created a production order and when i confirm the same i am getting following error as:
Document MeasUnit has a different dimension to the characteristic unit
Message no. IR071
Diagnosis
The measurement unit on creation of the measurement document must have the same dimension as the measurement unit of the characteristic of the measuring point.
In this case, the measurement unit % does not suit the character unit EA of the measuring point 103.
System Response
Processing will not be continued.
Procedure
Use the possible entries help.
Please suggest the solution.

Hello Sir(s)
i have gone through entire post for the subject related to measuring point auto update from production order confirmation. I have tried the same but i dont know what i am missing.
if i put some value like 1 or 2 and appropriate UOM then only my measuring document is being updated with the same value not with the actual confirmed quantity.. i have already maintained standard formulla in prt view.
my basic requirement is to get actual value of produced quanity as counter update. means if 20 pieces have been produced and confirmed in co11n, then counter must bhe updated with the value of confirmed quantity.
please advice what value should i put as usage in routing master to get actuall counter update.
Will Highly appreciate your quick reply.
Snapshots
Regards.
Mohammad.

Problems with Mini--continued reboot after update

I recently was given a Mini to play with. I was having some issues with it when I first received it. I read some forum posts and some other non-apple related help files on the internet. I finally got the Mini to work correctly, at least I was able to get to the menu screen and get the Mini recognized by my computer. When iTunes recognized my new ipod I was told to update the software, I did. The update that was "needed" was 1.4.1. I went ahead and downloaded this update. I was then told to plug the Mini into the wall outlet to make the update complete. I did this as well. I left the Mini plugged into the wall, using the Apple AC adapter and the provided USB connector. The Mini flashed the apple icon then the "plug into the wall" icon. I left the Mini plugged in overnight, I had no idea how long it would take to finish the update. The next day I tried to plug the Mini into my computer and I got a message telling me that my ipod might be corrupt and I should reset the ipod back to original settings. I tried that.
Now, as I type this, I have the same Mini plugged into my computer and it does not register as a USB device on my computer and itunes does not even recognize that it is connected. The Mini seems to be caught in some kind of rebooting loop. The screen continually reboots, going from the apple icon to the "plug in" icon. I don't know what else to try, besides throwing the ipod away.
I would really like some help with this problem. I have tried the 5Rs and I have gotten nowhere. I will gladly take any suggestion that can be made.
I am running a Dell Inspiron with Windows Vista Basic, if that helps. Thank you for any help.

I have followed your intruction and it does not correct the problem. Diskmode does not appear. The ipod is completely locked out. The apple symbol appears, followed by the plug-in picture and that is all.
This is a result of an update to version 1.4.1 via iTunes. Surely Apple have to provide a fix for this error as it was no fault of anyone elses that these ipods are now rendered useless.
To make matters worse, I have all my uni assessment information on the ipod, which is my sister's, and I can no longer access it. My assessment is in 2 days.
If I have to get the ipod "repaired" due to an apple update then that is plain ridiculous. To cost me money for repair due to an update provided by apple? That's insane. Apple should take responsibility for the problems this update has caused and provide a fix.

Continual Photoshop CC update failures

Every attempt to do an update to Photoshop CC fails, whether from the UPDATE menu within Photoshop, from a link in an Adobe email, or from clicking on a link at the Adobe site. The recent update for the RAW engine ended with: "
"Photoshop Camera Raw 6.7 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210"
This is typical. There is no quitting and starting again as the UPDATE button in Photoshop is now dimmed. There are dozens of complaints about this across the Internet. For the last major update I completely wiped out CC and started over. The Adobe site suggests doing that. Rediculous. I have been using Photoshop since before Version 4 and never had updating problems. Updates to the Cloud engine work fine. Nothing works updating Photoshop CC.
Any suggestions.

Jeff,
I have did this during the previous update, replacing the whole program as per the link above. Essentually, what you are saying is that every time Adobe announces an update, I must delete the program and do a complete reinstall and the update program is fragile and poorly designed. Of course, all my add-ons will have to be completely reinstalled and preferences checked/reinitialized. I have never used a quality program before that has required me to start over every time an update occurs. I have been using Photoshop since version 4 and never have I had to wipe out the system to do an update before using the CC version. All of the other program elements of the CC environment update without a problem. I'm not doing anything with Photoshop that is unusual. Dozens of others have complained of the exact same problem. The minute Photoshop is installed it fails on any subsequent updates.
Adobe needs to rewrite its update software such that it accomodates an average computer environment, replacing components that are missing or damaged and doing whatever is necessary to perform the update without throwing a fit. Adobe has suggested that the problem is that users delete languages that they don't use. So what? The update program can be written to either overwrite existing extensions, ignore the missing files, or add them again. The only thing that is clear is that the programmers of the update algorithm did not test their product in a real environment before release. There is no reason why a user should continually suffer such nonsense.
Laurence Gilbert

Troubleshoot Distribution Point Updates Failing

What are the best logs to look at for determining problems with
distribution points? We have 5 DPs. 2 of the DPs are failing to get
distributed content. Both of these systems are remote sites so it could
be due to network latency, but I need some logs to help narrow this
down.
I am watching the distmgr.log. I see the following entry showing its
retrying. The only other red messages are related to a DP that is
currently offline at the moment. Two of my DPs updated successfully.
The other two keep showing as Failed to distribute content.
Failed to process package BR100013 after 12 retries, will retry 88
more times SMS_DISTRIBUTION_MANAGER 5/14/2014 2:23:08 PM 2904
(0x0B58)

distmgr.log + pkgxfermgr.log
Torsten Meringer | http://www.mssccmfaq.de

MASS Article Master reorder point update thru program

Hi Gurus,
The BAPI to change Article Master is BAPI_MATERIAL_MAINTAINDATA_RT. Can you please let me know if there is any BAPI which i can use for MASS update of articles instead of calling the above BAPI in a Loop. My purpose is to mass udpate reorder point for articles.
Your help would be highly appreciated.
-David.

Hi David,
You can use the transaction MASS_MARC to do this.
Remember you can only change reorder point of the articles already on replenishment using this transaction.
Regards,
Naveen

How do I turn off Firefox checking for updates (I am fed up with Firefox continually asking to update when I don't want to due to previous bad experiences)

I would like to turn off firefox checking for updates
I don't want to update due to previous bad experiences with updates (version 4 and version 5)
I am frustrated by being reminded on a daily basis to update when I don't want to

Use
*'''Firefox button -> Options -> |Advanced | -> |Update|''' and uncheck the update option, or opt to ask first.
* see [[Options window - Advanced panel#w_update-tab]]_update-tab
* and to downgrade
**[[installing a previous version of Firefox]]
** and the download itself [http://www.mozilla.com/en-US/firefox/all-older.html]
Also note that currently
* firefox 3.6 is still supported, and has had recent security updates
* plans are to continue supporting it despite any comment on the download page
**(not sure how long for but see https://wiki.mozilla.org/Firefox/Planning/2011-09-07#Questions.2C_Comments.2C_FYI ) confirming continuing support for Firefox 3.6
* Firefox 3.6 has updated with security fixes, so is I think now 3.6.22 ; but it is NOT currently trying to upgrade its users to the current firefox release (Firefox 6)

Continual graph points updates xy graph

Similar Messages

Maybe you are looking for