Continual problem with the Adjustment brush in both Lightroom 3 and Lightroom 4

The Adjustment brush in both Lightroom 3 and Lightroom 4 continually stops functioning correctly - that is any adjustment made using the sliders in the Adjustment Brush panel does not make an adjustment on the image. Normally I would go to Library / Preferences [on my iMac OSX 10.6.8], remove the com.adobe.Lightroom3.plist file and restart Lightroom. However I have gone to Library/Preferences and there is no listing of any Lightroom 3 plist files, nor for that matter any adobe Photoshop CS5 plist files or any adobe Lightroom 4 plist files. I have tried restarting the iMac but to no avail - no help at all! I have no idea how to remedy the situation as I have no idea where the plist files have gone!!!
Incidentally I have a new iMac 27" OSX 10.8 - same problem with the Adjustment Brush there, but so far the plist files haven't disappeared into the ether somewhere!
Help would be appreciated ...
Many thanks

Hi Jussi
I tried changing to the B brush set, and the Adjustment Brush worked OK in there for a while - but now I have the same problem with the B brush set too. It appears to happen instantly - one minute they're working, the next minute they're not!! For example, I was adjusting Brightening using the Adjustment Brush and I literally made an adjustment on one image, then went back into the same image seconds later to make a further Brightening adjustment and the brush wasn't working - well, that is, not unless I pushed the slider to something like 160 and then I got minimal adjustment!!! I am becoming increasingly frustrated .. I have literally worked for months with no problems, now it's almost every day!!

Similar Messages

Hi! I have a problem with the adjustment brush some are not there anymore like soften skin, how i can fix that?

Hi! I have a problem with the adjustment brush some are not there anymore like soften skin, how i can fix that?

Hi dear,
it's funny, real funny.
I think the programmes have diffrent sound system from the normal calls system.
All you need to do is to turn the sound up from the bottom in the phone side in the time you're making or recieving the call.
you'll hear the sound.
I hope that would help.
All the best

Has anyone experienced a problem with the adjustment brush since last update (for Mac) last week?

Following an update to Lightroom on my Mac Pro work station last Friday: when I apply my adjustment brush to an area in an image, a faint box encompassing a much larger area than the size of my brush appears (extends well beyond the area I've identified with my brush and is clearly a large square shape). When I release my mouse, the adjustment I've made affects my entire image. I had no issues with adjustment brush prior to the update. I've been on the phone with Adobe support (no help). Have uninstalled/reinstalled Lightroom several times (no help). Adobe directed me to Apple (recommend use of Time Machine to date before Lightroom update came through). To ensure it's an isolated bug, I checked my MacBook Pro. Worked fine without update; I let update come through and find the adjustment brush "bug" is intermittent. When it occurs, however, I always see the larger "box" area, and the adjustment brush ultimately affects my entire image.
Anyone else experiencing this? Adobe support insists it's a Mac issue. Thanks!

Hi,
Following an update to Lightroom on my Mac Pro work station last Friday: when I apply my adjustment brush to an area in an image, a faint box encompassing a much larger area than the size of my brush appears (extends well beyond the area I've identified with my brush and is clearly a large square shape).
Same problem (rectangular areas) + others under Windows. The adjustment brush and the clone / heal tool have been totally broken in LR 3.2. You're not alone. See this thread. I have filed a bug report. No answer until now.

Something very strange is happening with the adjustment brush

When I brush over an area of a photo with the adjustment brush, LR does not select all of the area I brushed over, regardless how many times I go over it. The unselected spots look like pepper sprinkled on mashed potatoes, small dots that will not select, and so will not do whatever effect I'm trying to do. Like if I brush a hillside, the little dots will appear (apparently randomly) If I change the color temp the selected area changes like it should but the little specks do not change. LR will not select them. Please help.

Sorry, not the right answer. But thankx for taking a shot. According to
Adobe LR does not have enough pixels when I'm working on a macro subject
(say a butterfly that I'm trying to work on at 2x in the navigator) there
just are not enough pixels. So I have to transfer projects that deal with
micro subject into PS, PS had no problem detecting the holed and filling
them in, what I've got to do is select using the magic pen or whatever
works best and then make adjustments to the selection. We do that, no
problem. Then back to LR for larger more general adjustments. I have no
idea why, WHY Adobe would have two programs that work so closely together
and yet not have identical selection abilities. That's a mistake in my book.
On Sun, Oct 12, 2014 at 11:13 PM, Bob Somrak <[email protected]>

Why don't changes made in camera raw with the adjustment brush carry into photoshop?

Why don't changes made in camera raw with the adjustment brush carry into photoshop?

Using the Open button in ACR to get to PS doesn’t create a PSD or a TIF, it just transfers the image in memory.
As has been asked, already, what are the precise steps of your workflow starting with your painting the adjustment brush strokes in ACR and seeing the image in PS without the strokes, and what exact versions of PS and ACR are you using?
Use Help / About Photoshop..., and Help / About Plug-ins... / Camera Raw...

Can not find the Skin Soften option with the adjustment brush 2.0

When I first installed 2.0 I had an option for skin softening with the adjustment brush. Now it's gone. Does everyone using Lightroom 2.0 have skin soften with the adjustment brush?

In Develop press K for Adjustment Brush (or click the Brush Icon). The it appears in the drop down menu next to Effect: that defaults to Exposure and has a small set of up and down arrows to the right of it. Soften Skin is last after a divider. It also appears (????) there for Graduated Filter (M).
Don
Don Ricklin, MacBook 2Ghz Duo 2 Core running 10.5.4 & Win XP, Pentax K-10D & *ist D
See LR Links list at http://donricklin.blogspot.com for related sites.

502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

Hi There,
Need your assistance on the issue that we are facing in prod environment.
We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
and able to view the reports in Favorite Reports folder. But when I click on run Report we are getting the below error "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
Regards,
Sanjeev Kumar

Duplicate thread：
http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I need help with the adjustment brush.

When I first started using Lightroom, the adjustment brush worked fine. Now, I will select the adjustment brush, click on the photo I'm editing, and a red circle will appear depending on the circumference I chose. If I look at the thumbnail in the navigation sidebar to the left, the red circle appears as a black circle in that photo. In addition, none of the sliders will work with the exception of the exposure adjuster. However, the effects of adjusting the exposure only appear in the thumbnail in the navigation sidebar; the main image will stay red in the area selected. Does anybody have a clue how to fix this?

Press the [o] key (overlay) to make the red overlay disappear. The black that appears in your thumbnail is likely caused by a very high negative exposure value for the brush. It also sounds like you have the Adjustment Brush panel partially collapesed. On the same line as the word Effect: on the right side is a small black triangle, click on it to expand. These are the sliders that go with the brush - not hte sliders in the basic panel which I suspect you are using.

I have a problem with the speaker while using viber, Tango and rebtel

I have upgraded my iPhone 4 to 5.1.1 and in no time I started having a problem with the speaker. It simply doesn't work at all with Viber, Tango and Rebtel. It works fine with direct calls but not with calls through these applications. I have contacted Tango and Rebtel in this respect but non could help. Is anyone experiencing such problem. is there a solution. Many thanks for your helo

Thank you. Have given it a try - it sort of works, although doesn't turn up very loud!

Fixing the problem with the Device Not Recongized by WMP and Mediasource problem with MTP devi

PLEASE READ THE WHOLE THING!!! I KNOW IT SOUNDS LIKE MANY OTHER FAILED SOLUTIONS BUT YOU HAVE TO READ THROUGH MY WHOLE POST TO MAKE IT WORK!!!TRUST ME!!!
ok, now I read this a billion times, and felt that I was the only idiot that had a "bad" computer that didn't allow me to use my Zen mtp device... but it turns out I was more idiotic than I thought. I hope this helps those who have the same problem I had...here goes...
When you go to the Creative Labs website, go to Support, then Knowledge Base, then go to the MP3 players picture in the PRODUCT CATEGORY and click on it. You need to follow the steps that are described on the SID0053 Product Article. Then click on the Editing the System Registry link towards the bottom and it will tell you what to do...BUT there is something that I never ever did right and I bet lots of other folks didn't do right either. Once you are in the USB Properties seccion of the registry, YOU ACTUALY HAVE TO ADD THE WORD "EVERYONE" INTO THE ALLOWED SECCION!!! Not just because it says "Administrators" and what not means that EVERYONE IS ALLOWED, allow the word "everyone"thne click OK. Now, I did this with my Zen Touch on and plugged into the USB port and without the word DOCKED on it, as it wouldn't dock for me before this. that's it... hope it works for you, if it does then almost instantly the word DOCKED should appear on your MP3 player's Display. Hope that everyone has the same luck as I did. if not, I'll pray for you, I know how frustrating this problem is because I delt with it for toooooo long.

I had a similar problem with my Zen Touch, but the only symptom was not being able to install MediaSource or the Software Suite. I got the same messages that you did. I was able to use Windows Explorer to add/edit/remove files, but I wanted the Zen Media Explorer so that I could create playlists. After about 2 days of research and trial and error, I ended up fixing it by uninstalling/reinstalling the drivers.
If you don't know how to do that, here are instructions...
I'm using XP SP2, btw, so if you're using another version of Windows, it might be slightly different...
) With the Zen connected, Right-click on "My Computer"
2) Select "Properties"
3) Click on the "Hardware" tab and select "Device Manager"
4) Right Click on "MTP Device" (or MTP Media Player) and select "Uninstall"
5) Disconnect the player from the computer, wait about 5 secs, and reconnect.
When you reconnect it, the drivers will be reinstalled. Try running the setup again after that.
If that still doesn't work, look for random optional Windows updates, maybe?...esp. PlaysForSure, WMP, or USB/mobo/INF/Chipset driver updates...or maybe when it says "Setup could not detect and portable device on your system. Setup will now install the necessary drivers to enable your device to be detected," it actually <i>is</i> doing something, but it isn't apparent until you reinstall the driver. To be honest, I just don't know. The computer I'm using is only a few months old and I didn't have any problems installing on an older computer.
Oh well. I hope that fixes your problem.
As far as the problem with the 360 connectivity, I'm sorry I can't help you there.Message Edited by potestasx on -03-2006:28 PM
Message Edited by potestasx on -03-2006:45 PM

Problems with the dynamic loader... And well... I SERIOUSLY messed up.

So you might call me an idiot. Go ahead... I deserve it.
I was in the process of updating my netbook over SSH because I left it back home when I went to school. I ended up running into problems with glibc etc... So I did something that I seriously regret...
I executed the command...
mv /lib/* /usr/lib*
This has to be the most retarded thing I have ever done ever... Like I'm not even shitting you.
To make things worse... I don't have busybox and have no method of getting busybox onto the computer.
Now I have seen about using the dynamic loader "ld-linux.so.2" to execute programs using a user defined library path. So I thought perfect, I can do this. The problem is... I can't find it. I looked on two healthy Arch machines at the locations and names. I used that to try this. I am sure at least I have a recent version of glibc installed (<current version>-1 I believe). But I still cannot find this at all. I am logged in as root over SSH but it fails to log in again on another session. So I have one session to work with it I can work it at all.
Do you have any suggestions to fix this? If not, I can always have someone tomorrow dd a copy of an arch iso tomorrow and possibly fix everything... But I would really like this fixed without all of that... Thanks...

See these two threads.

Problems with the combination Mountain Lion, Parallels 8 and VPN

Hi there,
Have performed an straightforward upgrade of the OS X to Mountain Lion and Parallels I have have a problem keeping the vpn connection for more than an hour.
In order to get a the connection reetablished I need to restart the windows session in Parallels.
Is there any one else facing the same problem?
Best Regards,
Wolves0097

The VPN log looks like:
1      13:34:36.904 09/11/12 Sev=Warning/3
CM/0xA3100027
Adapter address 10.211.55.6 has changed or not detected. Current address(es): 10.98.70.169.
2      13:34:52.044 09/11/12 Sev=Warning/2
CVPND/0xA340000E
Failed to get adapter index.
3      13:35:07.044 09/11/12 Sev=Warning/2
CVPND/0xA340000E
Failed to get adapter index.
4      13:35:07.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
5      13:35:08.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
6      13:35:09.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
7      13:35:10.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CleanUpVASettings: Was able to delete all VA settings after all, error 0
8      13:35:11.861 09/11/12 Sev=Warning/2
IKE/0xA3000067
Received an IPC message during invalid state (IKE_MAIN:512)
9      13:35:12.407 09/11/12 Sev=Warning/2
IKE/0xA3000067
Received an IPC message during invalid state (IKE_MAIN:512)

Few problems with the dock. Creating App stack, and removing apps from dock

OK.. I am running leopard 10.5.4, and decided I wanted to use the app folder as a stack. I made my new folder with the alias' inside. However, when I went to move it into the dock, 9on the right side of the sizing bar), the other stacks failed to shift out of the way, so I couldn't add it in.
Another problem is that I can't see to remove apps from the dock. I have admin rights, and they are not active, hence the desire to get rid.
Anyone have an idea??

Erm... Doh! had dock 'locked' in Onyx...

Problem with S-raw from 1Ds mark III and Lightroom 2.5 (ACR 5.5)

Hello,
We develop over 100000 Raws per day using Lightroom 2.5 and a Canon 1 ds mark III. For the past six months we have been using the S-raw format for compatibility with our program Workflow. We’ve been having stability problems linked to luminosity, particularly differences in yellows, reds, oranges, and beiges.
This artefact lightens the whole of the image, which gives us several light densities within the same image series.
We’ve done several tests with photos shot in S-raw and JPEG simultaneously. The problem does not appear in the JPEGs, or in JPEGs generated by the S-raw format.
This is why we have concluded that the problem comes from Lightroom’s calculation algorithm for S-raw. This hypothesis is confirmed as the problem is only in Lightroom 2.5 (we’ve tested 5 competing programmes and have not had the same problem).
Ciao.

Problems with Lightroom should be posted in the Lightroom forum.
If you are having similar problems with some version of ACR, check the FAQ (http://forums.adobe.com/thread/311515?tstart=0) and provide more details, samples, etc... in a later post.

Continual problem with the Adjustment brush in both Lightroom 3 and Lightroom 4

Similar Messages

Maybe you are looking for