Continually prompted to update 30 GB Color iPod to 1.2 software

Every time I start iTunes, I get a message that a new version 1.2 is available. I then choose to download it, run setup, and that installs iTunes 6. I restart, then launch iTunes, and the process repeats.
I can synch,and have done so multiple times. I have tried to reset my unit by following the instructions, and it simply will not reset, after many, many attempts. Any help would be appreciated.

The problem was Apples software. The new software updates the Ipod just as it should, except for the stinking part about having to have an A/C charger. Again, the issue was due only to a problem with the previous version of the Ipod Updater. It would not work, and the new version does. Thanks, Apple. Thanks for nothing.

Similar Messages

  • How to do a software update on an ipod touch

    I need to figure out how to do a software update on an ipod touch. No software update button like my iPhone 4

    To update
    The Settings>General>Software Update comes with iOS 5 and later.
    Connect the iPod to your computer and update via iTunes as far as your iPod model allows
    iOS: How to update your iPhone, iPad, or iPod touch
    A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
    A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later. With OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
    A 3G to 5.1.1  Requires iTunes version 10.5 or later
    A 4G to 6  Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
    Identifying iPod models

  • HT201413 Was following prompts to update my ipod to iOS6 and itunes says the ipod needs to be restored, but when I follow the prompts to restore it says it can't find the ipod? Any ideas?

    Was following prompts to update my ipod to iOS6 and itunes says the ipod needs to be restored, but when I follow the prompts to restore it says it can't find the ipod? Any ideas?

    Did you try removing and reinstalling all the Apple software using:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • Do I have to wait to be prompted to update my iPod Touch, or can I do it manually?

    Do I have to wait to be prompted to update my iPod Touch, or can I do it manually?

    iOS: How to update your iPhone, iPad, or iPod touch
    A 1G iPod can go to iOS 3.1.3
    A 2G to 4.2.1
    A 3G to 5.1.1
    A 4G to 6
    Identifying iPod models
    The Settings>General>Software Update only appears if the iPod has iOS 5 or later.

  • When I got the prompt to update my iPod Touch 4th generation, the update claimed to have over 200 new features including Siri. Is there going to be another update that would make this a true statement?

    When I got the prompt to update my iPod Touch 4th generation, the update claimed to have over 200 new features including Siri. Is there going to be another update that would make this a true statement?

    No Siri on 4G Footnote 2 of
    Apple - iOS 6 - iPhone, iPad, and iPod touch get 200+ new features.
    says:
    Siri is available on iPhone 4S, iPhone 5, iPad (3rd generation), and iPod touch (5th generation) and requires Internet access.

  • No prompt to update when Flash Player Settings Manager is set to check for updates automatically

    My understading of http://forums.adobe.com/message/3562892#3562892 (March 2011) is that when an outdated version of the Player is used on Windows, the prompt to update should occur after the next restart of the operating system.
    So, when http://www.adobe.com/software/flash/about/ in Safari for Windows shows an outdated version 10.x of the Player:
    I restart Windows
    I log on
    I wait a few minutes.
    Problem
    Usually, no matter how long I wait, there is no prompt to update; Flash Player Settings Manager continues to show an outdated plug-in alongside a greater version of the ActiveX item.
    I see this problem with multiple computers running Windows XP and Windows 7.
    Any suggestions?

    Flash Player checks for updates every 7 days. The NCP doesn’t change this.  Where the user in that post is getting confused is that only after Flash Player detected an update (on average 3.5 days after a new version is released), the dialog will appear after a restart.
    Chris

  • Installed latest update, and now ipod touch won't work

    Hello, I clicked on the download and install option for the latest update to my ipod touch. I think it was 2.2.1, but I'm not 100% sure. Anyway, now I have to hold the power button down several seconds, and I see the apple logo, and then the itunes icon with the USB plug which indicates I need to connect to itunes. When I plug it in to the pc, I get prompted that I have installed new hardware and need to install the device drivers. It is not recognized by itunes or my pc. Please help!!

    Hello, all, my ipod touch is now working. Here's what happened...I called the tech support line and started going through the automated stuff. It started me with the reset which I had done numerous time. It then mentioned trying a different USB port. I figured it was a waste of time, but then I decided what the heck, so I tried the other usb port on the front of my pc. When I did this, it recognized the ipod in ituned and gave me a mssg that it needed to be restored. I clicked on the restore link, and minutes later it gave me an error message on the restore, and the ipod showed the apple on the sreen instead of the itunes logo with the usb cord. I then tried it back in the original usb port, and received the same windows prompt to try to install drivers that I had been getting all along. I put it back in the second USB port, and got the restore message again with it being recognized in itunes. This time it successfully completed the restore. I know it sounds simple, but if you have not tried a different USB port, be sure you do. Maybe the download jacked up my USB port? Anyway, I'm working again with the 2.2.1 download. Good luck to all!!

  • HELP!!! itunes wont update songs to ipod

    basically as the topic says im having trouble with itunes and my ipod Video , the problem is that i connect my ipod to my computer ,itunes recognizes my ipod and says its updating songs but it doesnt and after a minute or so it says "Itunes has encountered an error" and closes down.
    Any idea on how to solve this problem ??
    any help will be appreciated
      Windows XP  

    okay, we'd better try enlisting some additional technical help then.
    we'll get a crash log from itunes, and send it to so someone who can interpret crash logs. (it may take a few days before you get a response.)
    Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
    drwtsn32 -i
    And hit return.
    This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
    prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
    generate the crash, collect the crash log, and send it to this email address
    in the email:
    (1) state the precise version number of itunes that you're using, the version number of your ipod updater, the software version on your ipod, and the model of ipod you're getting the crash with:
    iPod: How to find software version
    Identifying different iPod models
    (2) include the URL to this thread so that the person who gets the email has some context, but also give as much information about the context of the crashing as you can.
    love, b

  • HT4972 im trying to update IOS version, have done everything as recommended.  however, it doesnt seem to be working, when i try to buy a tune i am again prompted to update to new IOS version... can you offer any advice

    im trying to update IOS version, have done everything as recommended.  however, it doesnt seem to be working, when i try to buy a tune i am again prompted to update to new IOS version... can anyone offer any advice

    Is this an iPhone or iPad question? You posted in the iPad forum.
    See
    iOS 5: Updating your device to iOS 5
    http://support.apple.com/kb/HT4972
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
    Tip - You may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • I changed my Exchange password in accounts but Notes continually prompts me to enter the new password.  How do I fix that?

    I recently upgraded to Mavericks.  I also recently changed my Exchange password.  I went into System Preferences > Accounts and updated the Exchange password.  Mail works fine.  Notes however, continually prompts me to enter my password every 10 seconds.  What do I do to fix it?

    when you go to system preferences>internet accounts and then choose your exchange account, is "Notes" checked?

  • Hi! I download the new update for my iPod on my pc but now it's stuck on the recovery mode! No jailbreak. I don't want to restore it because I'll loose all of my photos... HELP

    I download the new update for my iPod on my pc but now it's stuck on the recovery mode! No jailbreak. I don't want to restore it because I'll loose all of my photos... HELP

    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Adobe Reader XI keeps prompting to update to version 11.0.3

    Adobe Reader XI keeps prompting to update to version 11.0.3 even though the installed version is already 11.0.3.
    How can I stop this unnecessary update prompting occurring?

    Thanks for the response Stacy and Bill.
    The link to disable updates is giving a 404 error and if I go to the Knowledgebase link and search for “disable automatic updates | acrobat, reader” I just get links to forum threads.
    I have attached a snip of my Check for updates preference. I don’t want to go for the no notification option and I don’t trust the auto download options given that I keep getting so many notifications that the same update is available as the version I have: I fear that would simply continuously download the same update over and over.
    I’ll try the link you gave me again later to see if I can reach that page.
    Thanks again,
    Mike

  • Updating and Restoring Ipod

    When I connect my IPod (color display) to my computer, ITunes recognizes it only if Norton AntiVirus is turned off. Display says there is an available update for the IPod, but when I try to install it I getan error message "Error 1415 -IPod cannot be updated or restored". Can anyone help?

    You actually don't need to update your ipod, and the same thing happened to me. Mine finally did it when I restored it, but the update didn't seem to change anything...
    Presario 6000   Windows XP   64 MB Vid Card

  • I just installed Yosemite. iPhoto is gone, and Photos does not open.  Instead, I am prompted to update to the latest version. The App Store tells me that is not available in the US.  What do I do?  Cannot access any photos.

    I just installed Yosemite. iPhoto is gone, and Photos does not open.  Instead, I am prompted to update to the latest version. The App Store tells me that is not available in the US.  What do I do?  Cannot access any photos.

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Download and install the OS X Yosemite 10.10.3 Combo Update.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Unable to stop Flashplayer 11.5 from prompting for update

    Hi, I support about 3000 machines worldwide.  We use Windows 7 x64, with IE10.  In my base image I Installed Flashplayer ActiveX 11.5.502.146, using the full EXE installer and the switches -install -au2 (i do not want any updates done or users to get any prompts for updates).  The MMS.cfg created using these switches shows 2 lines:
    AutoUpdateDisable=1
    SilentAutoUpdateEnable=0
    and is located in the x64 path c:\windows\syswow64\macromed\flash
    In the Flash Player settings manager, the advanced tab shows the radio button selection "Never check for updates (not recommended) is selected (this is greyed out because all of our users run under standard user permissions). Installation runs fine and the product works fine in IE, the problem I have is that my users are still prompted by the Update Adobe Flashplayer message on a weekly basis.
    I looked at the admin guide for 11.5, and I believe my settings are right.  Why am I still getting this prompt?  Does mms.cfg have to be in the x86 path as well?  Is there something with standard user rights as it relates to adobe updates?  Should I install this from the MSI?
    I can't update to 11.7 right now as we are getting ready to start rolling out my image and don't want to make changes at this time.   I'm looking for any input on what I may be doing wrong that I continue to see update prompts.  Thanks in advance for any information, and I'd be happy to provide additional info if I left out something.

    See also http://forums.adobe.com/thread/1194289
    And https://bugbase.adobe.com/index.cfm?event=bug&id=3545918

Maybe you are looking for

  • New iMac and Final Cut Pro Error

    Just got a new 20" iMac. It comes with a ATI Radeon XT graphics card. I used Migration to transfer all apps and files from my old 17" iMac G4. When I launch Final Cut on the new iMac I get the following configuration error message: This software requ

  • Cannot find the Universe (DA0011)

    We have Migrated from Deski XIR2 to XI 3.1 FP4, when user either imports the report from the 3.1 repository or open Deski report they imported from the 3.1 repository they are getting the error Cannot find the Universe (DA0011).  The user closes comp

  • How do I open my iTouch device in a new window in iTunes?

    I useto be able to open my iTouch device in another window next to my iTune library so I could drag/drop songs over to my device, but now that I've upgraded to 11.0.1.12 there is no way to open the device in a new window. Whats even WORSE is after I

  • An Error occured while starting mirroring

    hi, i am getting the below error when i am trying to start mirroring. below is the screen shot. sal

  • I still acn't get my picture box to flicker between two grey levels WHILE the DAQ takes a measurement.

    I received a suggestion that I contain the two parts (grey level ficker and signal capture) in seperate while loops and use a local variable to pass a control to the measurement part from the flicker, with the control triggering the true statement of