Continuation of previous post under JiKeidan

''Duplicate post, continue here - [/questions/778641]''
''I have also copied the content of this post into the other one''
This is a continuation of the last post I had up, it is basically a web site redirect virus that seems to pull up a new window at various times, or while I click on several google searches will intermitantly redirect me to a tizag.com website, or other various search falsity websites...
After several hours of work put into trying to find this bug, removing smaller useless bugs from my system, and so on... I still have the bug on the computer... Now I have taken the liberty of running a process analyzer and stopping the analyzer once the bug started affecting my google, and have a dump of all the processes running, firefox related (since it redirects me it must reach into the firefox.exe process somewhere along the line), and would like to share that with you.
I posted it in the troubleshooting section as it won't fit into this section... and i don't have a troubleshooting information option in my help menu anyhow.
If you can help me figure out which process is being performed here that is unusual as far as firefox content goes, I can search through the memory stacks of those processes and trace this bug back to it's origin... helping myself and you guys in the future.

Fair ;0)
deleted several safari related and (I don't remember exactly) other plist but the suggestion came from this forum and I believe from you
repaired permissions in disk utility (took a long time)
changed DNS to open DNS server 208.67/..... 222 and 220
changed them in router as well (resulting in a "you are not connected..." error)
changed back to 192.168.1.1 which is router ip
removed Safari 4 beta
installed Safari 3.x.x (latest)
repeated processes above
ran disksweeper and macjanitor
checked router settings and Vista settings to match iBook tcp/ip and dns settings
Wireless status is connected with full signal
repeated permission repair
still page load status bar stops at Http: and remains blue

Similar Messages

Complete fail to boot / HP 8510w [continued - follow-up post]

Hello all,
This is the 2nd follow-up post after 1st post under the same name, from 10-28-2013 11:33 AM
[content is different from 1st post]
My laptop: HP laptop 8510w with    P/N KE186ET#ABE
My system board:    P/N KE481537-001
My system CPU: Intel Core 2 Duo processor T9300 - 2.50GHz
                               Penryn, 800MHz front side bus, 6MB Level-2 cache    P/N 463050-001
Problem:
Laptop started heating up seriously about 30 months ago. Symptoms were:
- fan at top speed continuously very soon after boot and
- heat being extracted from that small box was such that I could not keep my hand before the fan outlet or on top of it.
A month ago, my laptop called it quit.
When I switched the laptop on, the screen does not come alive and nothing at all happens. The power led is on and the span spins, but nothing else. (see previous post for more details - 10-28-2013 11:33 AM)
So.... I took the machine apart (very entertaining), bought a new system board and put the new syst-board in place along with everything else. Same !
Can anybody help and suggest the next step ? Is it the processor ?
Is it the video chip module ?
Is it something else ?
-- How can I best proceed (short of throwing the whole lot out of the window) ?
Thanks to all.
-cedric

Nope, this does not help at all.
I sure don't understand the rationale behind your automated reply.
Beside isn't this supposed to be a forum ? With real people behind posts and replies ?
- In what way(s) is this post different from any other one on this board ?
- What do you mean by "This is a commercial product" ?
- Aren't all HP laptops and hardware components commercial products ?
-cedric

What happened to my previous posts?

Greetings, all,
Since Apple overhauled the Discussions area, my previous posts no longer seem to be in the database. This is not a big deal for me, as I had only made 15 posts or so, but I'm wondering whether I can do something to reclaim those posts as my own, etc.
Thanks very much for your time. Let me know if I can pass along other useful details.
Cheers,
Nate
PowerBook G4 Mac OS X (10.4.5) 1.67 GHz, 1 GB RAM

Hi Nate!
Although your previous posts are no longer available, entries that have been posted, since the New Discussions format was introduced in Nov '05, are no longer removed from the system.
Your posts under the Alias VoyagerBlue, will be archived. What that means is, that if there are no additional responses in the Threads they reside in, the Topics will get continually pushed down on the Topics list. After a certain amount of time, maybe 1 to 3 months, the Threads will be locked, so no responses can be entered. But the Threads will not disappear.
The Topics that you start, will show VoyagerBlue, in the Author field of a main forum page, but eventually, readers will have to keep going to the succeeding pages to view them.
If someone were to do a Search:
Restrict by Category or Forum: All Categories
Restrict by Date Range: All
Restrict by Username: VoyagerBlue
all of your posts, since about 11/13/05, would be found.
Clear as mud?
ali b

The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

How to Get a List of All XMLElements (Follow up to previous posting)

(CS5, Win7, 64Bit)
I need a collection (or array, etc.) of all the XMLElement objects in a given document in flat form (just like the "Structure Tree"'s hierarchichal view - only flatened).
I could not find any "normal" way (i.e., built-in property or method) to get at the information. Instead, I found that I had to recurse through the entire XMLElement tree, starting with the Root Element. For a large document, this can take close to a ten minutes, and sometimes I have to do this for an InDesgin Book containing over ten enormous INDD files.
After "கற்பனை Imagine" responded to my previous post about how to get all the XMLTags, I assumed that myDocument.xmlElements would return a collection of all the XMLElements in the Document. Unfortunately, it does not - it returns only the Root XMLElement. Thus, I have to recurse therough the hierarchy of XMLElements under the Root XMLElement - which takes a very long time.
There HAS to be a better way, right?
Would it be better were I to recurse through all PageItems in the document and then recurse through each PageItem's XMLElement tree? I assume that wouldn't make a big difference either way.
I'm open to suggestions...
TIA,
mlavie

mlavie:
I could not find any "normal" way (i.e., built-in property or method) to get at the information. Instead, I found that I had to recurse through the entire XMLElement tree, starting with the Root Element. For a large document, this can take close to a ten minutes, and sometimes I have to do this for an InDesgin Book containing over ten enormous INDD files.
What do you intend to do with this flat layout of XMLElements? That probably matters a great deal.
If performance is really at play, you can try using XML Rules instead of interacting with the DOM from JavaScript. But they are complicated and confusing and more suited to declarative programming.
Imagine suggests:
var a = myroot.evaluateXPathExpression ("//*");
xmlObjArray.push(a[b--]);
Why not stop there? evaluateXPathExpression already returns an array, why iterate over it and push its elements into a new array? What's wrong with the return value?

BlackBerry World not accepting VISA card -- follow up to my previous post

Re purchase of an app for new Z10 -- main software all successfully updated to most recent. Well, I posted last time about being escalated up through the ranks of BlackBerry software helpers from Bell, and after several levels getting a very easy-to-communicate-with woman from BlackBerry in Halifax, NS...
She told me Bell would bill me for the apps on my carrier bill, and I told her No, they told me they didn't do that, not in Victoria BC my home town, anyhow. I asked her to call and contact them... she said she did, and said Yes, they would. So I set that up on my BlackBerry World sign-in page using my computer, under her guidance, and it seemed to be set up. I even purchased an app that way successfully, afterwards... [She told me at the time that yes, there was a problem with the tool that handles VISA payments, sometimes...]
BUT, several days later when I went to do the same thing again with another app, well, I had a message in red on my purchase screen on my Z10 that carrier purchase was not available!
Ahem.
So, I tried purchasing via VISA again [read my previous post, I called VISA, tried to see if there was something wrong there, no there wasn't]. No form of my re-entering my VISA card or editing it etc. would work.
So I tried PayPal, over the past weekend I established a PayPal account to be paid for via my same VISA card, that took some doing as the procedure is not that clear on their website and you have to explore the sections under "my money" etc. to see just what is going on with it... without any warning or info from either BlackBerry or PayPal the account wouldn't work [refused several tries to purchase an app] until a special method for BlackBerry was posted in that "my money" section on PayPal, they call it a prepayment account or something like that, it takes about an hour or two on a Sunday for that to appear for a new account, and then [I was doing this via my computer after signing in to PayPal] I saw a side message that this purchasing procedure would not work until August 12th.
Today, August 12th, I just purchased a trial app, Medieval Ringtones, and that went through! Unfortunately I was on just our own house WiFi [good signal, I thought at the time, though], and just before it got installed something said "network problem" and it stopped installing. Now I can't buy it again either, I'll try later just to see if it reloads -- it wouldn't reload to the purchase point. I don't really care, it was an experiment. I just downloaded a free app, Top 500 Ringtones, from BlackBerry World, and that went smoothly and seems great, lots of choices, most of them free as far as I can tell.
Warning to users: I would establish the PayPal account via BlackBerry World's own access point on the computer, first, through the BlackBerry World website, clicking on their PayPal symbol, before trying to purchase via PayPal, as establishing a PayPal account first, independently, may lead to confusion if you establish it outside of BlackBerry World.
Now, I have noticed the work-around posted by a BlackBerry Forum guru here on using a dummy VISA account, this helpful person provides a list. WOULD THIS HELPFUL PERSON PLEASE EXPLAIN THE PROCEDURE IN DETAIL? i WOULD HAVE NO IDEA HOW TO DO IT IN PRACTICE -- APPARENTLY THE SOFTWARE WILL STILL CHARGE THE APP TO ONE'S REGISTERED VISA??? PLEASE GIVE DETAILED INSTRUCTIONS.
If I can, indeed, purchase something via PayPal, or ultimately, indeed with a VISA payment, without a glitch [I'll keep trying] I'll report it here. Meanwhile all the apps I've downloaded from BlackBerry World have been free ones, except for the one that mistakenly got sold to me via Bell billing me for it [which they won't] a few days ago [either Bell or BB got stuck with the $1.99 or something for that!]. The free ones I've downloaded have been excellent, including this Top 500 Ringtones, just the kind I was looking for, lots of real telephone and cell phone ring sounds for a purist like me...
But I hope BlackBerry can fix up the glitch in BlackBerry World soon, it shouldn't be there at all... my husband has the theory the facility is staffed by too small a core of software people to keep up with the problems and wasn't properly tested, or else it was subcontracted out and they are stuck with it until they get a new one -- come on, BlackBerry, get a new BlackBerry World payment procedure that works smoothly, us BlackBerry fans are anxious about you!!!

Just to say there ARE lots of Apps on BlackBerry World, so potential BB purchasers should not let that stop them, and some very good free ones, excellent -- BlackBerry Travel is really good, and OsmAnd maps are fabulous, big to download, but when you get it you'll be amazed. Just download a provincial or smaller map to start, because they are huge files and very detailed, but lots of trails and paths are on them... good for park trails and such.

Related to previous post..

Hi realted to my previous question, I was looking at standard ABAP SAPCript driver program PSFCOBJL.
I see something like follwoing inside include LCODRINC:-
Import .....
FROM MEMORY ID 'PPT'.
IMPORT ITAB
         ITAB_TDR       FROM MEMORY ID 'PPI'.
IMPORT PRLST_TMP      FROM MEMORY ID 'PPS'.
What does memory ID' PPT', 'PPI' and 'PPS' signify.
Is this the place from where we can ftech the initail data field(Explained in my previous post)
Tushar.

SAP and ABAP/4 Memory
There is a difference between the cross-transaction SAP memory and the transaction-specific ABAP/4 memory.
SAP memory
The SAP memory, otherwise known as the global memory, is available to a user during the entire duration of a terminal session. Its contents are retained across transaction boundaries as well as external and internal sessions. The SET PARAMETER and GET PARAMETER statements allow you to write to, or read from, the SAP memory.
ABAP/4 memory
The contents of the ABAP/4 memory are retained only during the lifetime of an external session (see also Organization of Modularization Units). You can retain or pass data across internal sessions. The EXPORT TO MEMORY and IMPORT FROM MEMORY statements allow you to write data to, or read data from, the ABAP memory.
Please consult Data Area and Modularization Unit Organization documentation as well.
and
Memory Structures of an ABAP Program
IMPORT - Reading Data
Variants:
1. IMPORT obj1 ... objn FROM MEMORY.
2. IMPORT obj1 ... objn FROM DATABASE dbtab(ar) ID key.
3. IMPORT obj1 ... objn FROM LOGFILE ID key.
4. IMPORT DIRECTORY INTO itab FROM DATABASE dbtab(ar) ID key.
5. IMPORT obj1 ... objn FROM DATASET dsn(ar) ID key.
6. IMPORT obj1 ... objn FROM SHARED BUFFER dbtab(ar) ID key.
7. IMPORT (itab) FROM ... .
Variant 1
IMPORT obj1 ... objn FROM MEMORY.
Additions:
1. ... = f (for each object to be imported)
2. ... TO f (for each object to be imported)
3. ... ID key
In an ABAP Objects context, a more severe syntax check is performed that in other ABAP areas. See ID must be specified and Implicit Field Names not Allowed inClusters
Effect
Imports the data objects obj1 ... objn (fields, structures, complex structures, or tables) from a data cluster in ABAP memory . All data exported to ABAP memory using EXPORT... TO MEMORY without ID is read. Unlike the IMPORT FROM DATABASE variant, the sytsem does not check whether the structures used in EXPORT and IMPORT correspond.
The return code is set as follows:
SY-SUBRC = 0:
Data objects imported.
SY-SUBRC = 4:
Unable to import data objects.
The ABAP memory was probably empty.
The contents of all listed objects remain unchanged.
Notes
You should always use addition 3 /... ID key) with this statement. Variants that do not use this addition have unpredictable effects ( EXPORT statements in different parts of programs can overwrite each other's data in ABAP memory. These variants only exist for the sake of compatibility with R/2.
Please consult Data Area and Modularization Unit Organization documentation as well.
Addition 1
... = f (for each object you want to import)
Addition 2
... TO f (for each object you want to import)
Effect
Places the object in the field f.
Addition 3
... ID key
Effect
Only the data stored in ABAP memory under the key key is imported.
The return code is set as follows:
SY-SUBRC = 0:
Data objects imported.
SY-SUBRC = 4:
Data objects could not be imported.
You may have used an incorrect ID.
The contents of all listed objects remain unchanged.
Related
EXPORT TO MEMORY, FREE MEMORY
Variant 2
IMPORT obj1 ... objn FROM DATABASE dbtab(ar) ID key.
Additions:
1. ... = f (for each object you want to import)
2. ... TO f (for each object you want to import)
3. ... CLIENT g (before ID key )
4. ... USING form
5. ... TO wa (as last addition or after dbtab(ar))
6. ... MAJOR-ID id1 (instead of ID key)
7. ... MINOR-ID id2 (together with MAJOR-ID id1)
In an ABAP Objects context, a more severe syntax check is performed that in other ABAP areas. See Implicit field names not allowed in clusters and Table work areas not allowed.
Effect
Imports data objects obj1 ... objn (fields, structures, complex structures, or tables) from the data cluster with the ID key in area ar of the database table dbtab (compare EXPORT TO DATABASE).
The return code is set as follows:
SY-SUBRC = 0:
Data objects imported.
SY-SUBRC = 4:
Data objects could not be imported.
You may have used an incorrect ID.
The contents of all listed objects remain unchanged.
Example
Importing two fields and an internal table:
TYPES: BEGIN OF TAB3_TYPE,
          CONT(4),
       END OF TAB3_TYPE.
DATA: INDXKEY LIKE INDX-SRTFD,
      F1(4), F2 TYPE P,
      TAB3 TYPE STANDARD TABLE OF TAB3_TYPE WITH
                NON-UNIQUE DEFAULT KEY,
      WA_INDX TYPE INDX.
INDXKEY = 'INDXKEY'.
IMPORT F1   = F1
       F2   = F2
       TAB3 = TAB3 FROM DATABASE INDX(ST) ID INDXKEY
       TO WA_INDX.
Notes
You must have named the table dbtab listed in DATABASE in a TABLES statement (except in addition 7).
The structure of the fields, structures, and internal tables that you want to import must correspond to the objects exported to the dataset. Furthermore, the objects must be imported with the same names with which they were exported. If you do not do this, the import will fail, and a runtime error may occur.
Exception: The last field may be longer or shorter, as long as it has type CHAR. Likewise, you can add or remove CHAR fields at the end of the structure.
Addition 1
... = f (for each object you want to import)
Addition 2
... TO f (for each object you want to import)
Effect
Places the object in the field f.
Addition 3
... CLIENT g (before ID key)
Effect
The data is taken from client g (only for client-specific import/export databases).
Example
DATA: F1,
      WA_INDX TYPE INDX.
IMPORT F1 = F1 FROM DATABASE INDX(AR) CLIENT '002' ID 'TEST'
               TO WA_INDX.
Addition 4
... USING form
Note
This statement is for internal use only.
Incompatible changes or further developments may occur at any time without warning or notice.
Effect
The data is not read from the database. Instead, the subroutine form is called for each data record that would have been read from the database. This routine can use the key fields of the records that would have been read from the work area of the database table and write the procured data into the work area. The routine has the name <database table name>_<subroutine name>. It has one parameter that describes the operation mode (READ, UPDATE, or INSERT). The routine must set SY-SUBRC to indicate whether the function has been executed successfully.
Note
Runtime errors: Various runtime errors can occur, depending on the operands you use to import data:
Addition 5
... TO wa (last addition or after dbtab(ar))
Effect
Use this addition when you want to read user data fields that have been strored in the database. Instead of the table work area, the statement uses the specified work area wa. The target area must have the structure of the corresponding table dbtab.
Example
DATA WA LIKE INDX.
DATA F1.
IMPORT F1 = F1 FROM DATABASE INDX(AR)
               CLIENT '002' ID 'TEST'
               TO WA.
WRITE: / 'AEDAT:', WA-AEDAT,
       / 'USERA:', WA-USERA,
       / 'PGMID:', WA-PGMID.
Addition 6
... MAJOR-ID id1 (instead of ID key)
Addition 7
... MINOR-ID id2 (together with MAJOR-ID id1)
This addition is not allowed in an ABAP Objects context. See Generic ID not allowed.
Effect
Searches for a record with an ID whose first part corresponds to id1 and (if you also specify MINOR-ID id2) whose second part is greater than or equal to id2.
Variant 3
IMPORT obj1 ...objn FROM LOGFILE ID key.
Note
This statement is for internal use only.
Incompatible changes or further developments may occur at any time without warning or notice.
Additions:
1. ... = f (for each field f you want to import)
2. ... TO f (for each field f you want to import)
In an ABAP Objects context, a more severe syntax check is performed that in other ABAP areas. See Implicit field names not allowed in clusters
Effect
Imports data objects (fields, structures, or internal tables) from the update data. You must specify the update key assigned by the system (with the serial request number).
The return code is set as follows:
SY-SUBRC = 0:
Data objects imported.
SY-SUBRC = 4:
Data objects could not be imported.
You may have used an incorrect ID.
The contents of all objects listed in the statement remain unchanged.
Addition 1
... = f (for each object you want to import)
Addition 2
... TO f (for each object you want to import)
Effect
Places the object in the field f.
Variant 4
IMPORT DIRECTORY INTO itab FROM DATABASE dbtab(ar) ID key.
Additions:
1. ... CLIENT g (before ID key)
2. ... TO wa (last addition or after dbtab(ar))
In an ABAP Objects context, a more severe syntax check is performed that in other ABAP areas. See Table work areas not allowed.
Effect
Places a directory of the objects stored under the specified ID using EXPORT TO DATABASE in the internal table itab. itab may not have the type HASHED TABLE or ANY TABLE.
The return code is set as follows:
SY-SUBRC = 0:
Directory imported.
SY-SUBRC = 4:
Unable to import directory.
You may have used an incorrect ID.
The internal table itabmust have the same structure as the ABAP Dictionary structure CDIR (INCLUDE STRUCTURE).
Addition 1
... CLIENT g (before ID key)
Effect
Takes the data from client g (only if the import/export database is client-specific).
Addition 2
... TO wa (last addition, or after dbtab(ar))
Effect
Uses the specified work area wa instead of the table work area. The table dbtab specified after DATABASE does not, in this case, have to be declared in a TABLES statement. The specified target area must have the same structure as dbtab.
Example
Directory of a cluster consisting of two fields and an internal table.
TYPES: BEGIN OF TAB3_LINE,
         CONT(4),
       END OF TAB3_LINE,
       BEGIN OF DIRTAB_LINE.
         INCLUDE STRUCTURE CDIR.
TYPES END OF DIRTAB_LINE.
DATA: INDXKEY LIKE INDX-SRTFD,
      F1(4),
      F2(8)   TYPE P decimals 0,
      TAB3    TYPE STANDARD TABLE OF TAB3_LINE,
      DIRTAB TYPE STANDARD TABLE OF DIRTAB_LINE,
      INDX_WA TYPE INDX.
INDXKEY = 'INDXKEY'.
EXPORT F1 = F1
       F2 = F2
       TAB3 = TAB3
       TO DATABASE INDX(ST) ID INDXKEY " TAB3 has 17 entries
       FROM INDX_WA.
IMPORT DIRECTORY INTO DIRTAB FROM DATABASE INDX(ST) ID INDXKEY
       TO INDX_WA.
DIRTAB subsequently has the following contents:
NAME     OTYPE FTYPE TFILL FLENG
F1         F      C      0      4
F2         F      P      0      8
TAB3       T      C      17     4
Meanings of the individual fields:
NAME:
Name of the object
OTYPE:
Object type (F: field, R: structure / ABAP Dictionary structure, T: internal table)
FTYPE:
Field type (C: character, P: packed, ...)
Structures and internal tables have type C.
TFILL:
Number of filled lines in an internal table
FLENG:
Length of the field in bytes
For internal tables: Length of the header line.
Variant 5
IMPORT obj1 ... objn FROM DATASET dsn(ar) ID key.
This variant is not allowed in an ABAP Objects context. See Clusters not allowed in files
Note
Do not use this variant.
Note
Catchable runtime errors
The following catchable runtime errors can occur with this variant:
EXPORT_DATASET_CANNOT_OPEN: The EXPORT/IMPORT statement could not open the file.
OPEN_DATASET_NO_AUTHORITY: No authorization to access a file.
Variant 6
IMPORT obj1 ... objn FROM SHARED BUFFER dbtab(ar) ID key.
Additions:
1. ... = f (for each object you want to import)
2. ... TO f (for each object you want to import)
3. ... CLIENT g (before ID key)
4. ... TO wa (last addition or after dbtab(ar))
In an ABAP Objects context, a more severe syntax check is performed that in other ABAP areas. See No implicit field names allowed in clusters and Table work areas not allowed.
Effect
Imports the data objects obj1 ... objn (fields, structures, complex structures, or tables) from the cross-transaction application buffer. The data objects are read from table dbtab using the ID key from area ar (see EXPORT TO SHARED BUFFER).
The return code is set as follows:
SY-SUBRC = 0:
Data objects imported.
SY-SUBRC = 4:
Unable to import data objects.
You may have used an incorrect ID.
The contents of all data objects listed in the statement remain unchanged.
Example
Importing two fields and an internal table from the application buffer with the structure indx:
TYPES: BEGIN OF ITAB3_LINE,
         CONT(4),
       END OF ITAB3_LINE.
DATA: INDXKEY LIKE INDX-SRTFD VALUE 'KEYVALUE',
      F1(4),
      F2(8) TYPE P DECIMALS 0,
      ITAB3 TYPE STANDARD TABLE OF ITAB3_LINE,
      INDX_WA TYPE INDX.
Import data
IMPORT F1 = F1 F2 = F2 ITAB3 = ITAB3
       FROM SHARED BUFFER INDX(ST) ID INDXKEY TO INDX_WA.
After the import, the fields before CLUSTR
(INDX-AEDAT and INDX-USERA) are filled with the
values they had before the corresponding EXPORT
statement.
Notes
The table dbtab specified after DATABASE must be declared under TABLES (except in addition 2).
The structures of the fields, structures, and internal tables you want to import must be the same as those fo the objects you exported. The EXPORT and IMPORT statements (unlike IMPORT FROM DATABASE statement) does not check that they are the same. If the structures are not the same, a runtime error may occur if invalid assignments are attempted during the operation. The objects must also be imported using the same name as that with which they were exported. Otherwise, nothing is imported.
Please consult Data Area and Modularization Unit Organization documentation as well.
Addition 1
... = f (for each field you want to import)
Addition 2
... TO f (for each field you want to import)
Effect
Places the object in field f.
Addition 3
... CLIENT g (before ID key)
Effect
Takes the data from client g (if the import/(export table dbtab is client-specific).
Addition 4
... TO wa (as last addition or after dbtab(ar))
Effect
Use this addition if the application buffer contains user data fields that you want to read. Instead of the table work area, the system uses the specified work area wa. The target area you specify must have the same structure as dbtab.
Example
DATA: INDX_WA TYPE INDX,
      F1.
IMPORT F1 = F1 FROM SHARED BUFFER INDX(AR)
               CLIENT '001' ID 'TEST'
               TO INDX_WA.
WRITE: / 'AEDAT:', INDX_WA-AEDAT,
       / 'USERA:', INDX_WA-USERA,
       / 'PGMID:', INDX_WA-PGMID.
Variant 7
IMPORT (itab) FROM ... .
Effect
Specifies the objects you want to import in the internal table itab. You can use this variant instead of the static object list in the following variants: " ... FROM MEMORY", "... FROM DATABASE ", " ... FROM DATASET" und "... FROM SHARED BUFFER". Any additions that are valid in the static cases can also be used here. The table itab may not have the type HASHED TABLE or ANY TABLE.
Note
Structure of the internal table itab:
The first column of the table contains the object name in the data cluster (corresponds to obj1 ... objn from the static case. The second column contains the different name in the program (if necessary), and corresponds to f in the FROM f addition. If the table has only one column, or the second column contains only blanks, the statemeht is the equivalent of a static IMPORT with no TO addition. Both the first and the second columns should have the type character.
Example
TYPES: BEGIN OF OBJ_LINE,
        CLUSTERNAME(30),
        PROGRAMNAME(10),
      END OF OBJ_LINE,
      BEGIN OF B_LINE,
        FIELD_1    TYPE I,
        FIELD_2(1) TYPE N,
      END OF B_LINE.
DATA: OBJ_TAB TYPE STANDARD TABLE OF OBJ_LINE,
      OBJ_WA TYPE OBJ_LINE,
      B_PROG TYPE STANDARD TABLE OF B_LINE,
      B_WA    TYPE B_LINE,
      A(10),
      C_PROG LIKE SYST.
MOVE: 'A'    TO OBJ_WA-CLUSTERNAME.
APPEND OBJ_WA TO OBJ_TAB. CLEAR OBJ_WA.
MOVE: 'B'      TO OBJ_WA-CLUSTERNAME,
       'B_PROG' TO OBJ_WA-PROGRAMNAME.
APPEND OBJ_WA TO OBJ_TAB. CLEAR OBJ_WA.
MOVE: 'C'      TO OBJ_WA-CLUSTERNAME,
       'C_PROG' TO OBJ_WA-PROGRAMNAME.
APPEND OBJ_WA TO OBJ_TAB. CLEAR OBJ_WA.
IMPORT (OBJ_TAB) FROM MEMORY ID 'ABCD'.
The dynamic EXPORT statement corresponds to the static IMPORT statement.
IMPORT A = A B = B_PROG C = C_PROG FROM MEMORY ID 'ABCD'.
Places the single field A in field A, the internal table B in the internal table B_PROG, and the structure C in the structure C_PROG.
Note
Runtime errors:
DYN_IMEX_OBJ_NAME_EMPTY: The object name in the cluster (that is, the contents of the first column of obj_tab) is empty.
DYN_IMEX_OBJ_NAME_TWICE: An object name (in the cluster) occurs twice in the first column of the internal table.
DYN_IMEX_OBJ_NOT_FOUND: The data object in the program (the object whose name appears in column 2, if this is not empty, otherwise in column 1) does not exist.
The return code is set as follows:
SY-SUBRC is set in the same way as for the static IMPORT.
Note
General notes about catchable runtime errors
The variants
IMPORT obj1 ... objn FROM MEMORY,
IMPORT obj1 ... objn FROM DATABASE dbtab(ar) ID key,
IMPORT obj1 ... objn FROM DATASET dsn(ar) ID key,
IMPORT obj1 ... objn FROM SHARED BUFFER dbtab(ar) ID key,
IMPORT (itab) FROM ... ,
can cause the following catchable runtime errors:
CONNE_IMPORT_WRONG_COMP_LENG: A component in the dataset has an incorrect length
CONNE_IMPORT_WRONG_COMP_TYPE: A component in the dataset has an incorrect type
CONNE_IMPORT_WRONG_FIELD_LENG: A field in the dataset has the wrong length
CONNE_IMPORT_WRONG_FIELD_TYPE: A field in the dataset has the wrong type
CONNE_IMPORT_OBJECT_TYPE: Type conflict between a simple and a structured data type
CONNE_IMPORT_WRONG_STRUCTURE: Type conflict between structured objects
IMPORT_ALIGNMENT_MISMATCH: Same sequence of components in different structures
IMPORT_TYPE_MISMATCH: Only with IMPORT...FROM MEMORY | FROM SHARED BUFFER...

Re-open the Previous posting period

hi...
we have closed the posting period for the month of 01-02(april-may) and open the 03-04(june-july)...
but now we want to open the previous posting period i.e. 01-02(april-may) again...so how could we do this..
one solution i have got is that...
1. go to OX18 delete all the assignment for that company code and plant.
2. go to OMSY and change the posting period..
3. go to OX18 and reassign the plant and company code again...
this is the right method to do that..?
will there be any -ive implications if I open the previous period by this procedure..?
or suggest me some other way to do that...
Thanks in advance

Hi
You can open Closed MM periods but be careful because SAP does recommend opening closed MM periods.
Steps are :
1) Tcode MMPI --from Tool Bar select - System - User Profile - Own Data - In parameter Tab Enter "MMPI_READ_NOTE" in parameter Field.
Try to remove assignment of plants from company code.
Now Go to -
T-Code OMSY & Set the required Period.
Re-assign Plants to Company Code & Check whether correct preriod is open thru T-Code - MMRV
Now use T-code - OMWD to Assign Valuation grouping code to Valuation area because the earlier data gets deleted when assignment of Plants was removed.
Use the transaction code OMS2 then select FERT (or any other Material Type used by your company)
Then click on the quantity and value update.
Select your plant or valuation area and put Tick Marks in Value update and Quantity update
Even check this link...Reopening the posting period that was closed
This will definitely reslove your problem.
Thanking you.

Change in Useful life of asset in mid year, but the previous posted depreciation should not be changed

Dear Experts,
I have a requirement in one of my client, We need to extend the useful life of asset in mid of an asset fiscal year and the depreciation which was posted in the previous should not be changed.
Requirement:
Useful life of asset is to be extended after completing depreciation for 4 years and in-between the current asset fiscal year. Provided the present asset value has to be taken as the new book value of the asset and the depreciation posted henceforth to be posted based on the new asset value till the remaining useful life.
Previously posted depreciation should be unchanged.
Analysis:
1.      The fiscal Year followed - October to September.
2.      The useful life of asset will be changed, and the depreciated value posted till 31/mar 2014 will have the old depreciation value ( based on the original acquisition value)
3.      The Depreciation key used in of type LINR (linear), depreciation value will be calculated based on the Book value till the asset value becomes ZERO at the end of useful life of the asset.
4.      We can change the useful life of the asset at the end of a Asset fiscal year say FY- 2014, if this is done the existing configuration will take the Book value of the asset at the end of the Fiscal as the asset value and the new depreciation will be calculated based on the new useful life of the asset. The asset value will become ZERO at the end of the newly changed Useful Life.
5.      But the requirement is that the useful life of the asset will be changed exactly half way in between existing Asset fiscal (i.e., 31/03/2014), if this is done system will change the depreciation value based on the new useful life ( since the Dep Key is LINR), but the depreciation value will change from the fiscal start say October 2013 to September 2014 ), which will not satisfy the requirement of the client. Since the depreciation which is already posted from October 2013 to March 2014 should not be changed.
Note:
1. We are not willing to retire the asset and create a new asset with the remaining book value as asset value and start depreciation.
Kindly let me know if the requirement can be fulfilled without retiring the asset.

Dear All,
This requirement has been completed.
1. I created New Multi level valuation method with base 26 ( Net book value w/o Revaluation ).
2. New depreciation key was created and the above method was assigned to it. I never changed the Base method.
3. new interval was created in the depreciation area, with this created dep key and extended the useful life of the asset. The depreciation was calculated according to the requirement.
Originally the asset had useful life of 5 Years, I changed the asset useful life to 8 years now with new Depreciation key 2001.
Depreciation was already posted to the asset till 04- 2013 for an amount of 148.27 SAR.
Net Book value carried forward to 2013 = 1575.56 SAR
Depreciation already posted till 4th period =   148.27 SAR
Current Net book value after useful life extension           = 1427.29 SAR .
Now the new depreciation key 2001 with Multilevel method 201, will take this Net-book value as Asset value and will depreciate along the useful life of the asset till it becomes zero.
Planned depreciation of 2013 ( remaining 6 months) = 166.24 SAR
Planned depreciation of 2014 = 225.96 SAR
Planned depreciation of 2015 = 225.96 SAR
Planned depreciation of 2016 = 225.96 SAR
Planned depreciation of 2017 = 225.96 SAR
Planned depreciation of 2018 = 225.96 SAR
Planned depreciation of 2019 = 131.25 SAR
Total      = 1427.29 SAR ( the Asset value becomes zero at the end of its remaining useful life.
The previously posted depreciation from 01.01.2013 to 30.04.2013 was untouched.

Posting a credit memo in reference to a previously posted document

Hi SAP gurus,
I would just like to ask if there is a functionality in SAP re: credit memo postings wherein the system can refer to a previously posted customer document and automatically derive the values such as GL account, cost center and business area of the posted document to the new Credit memo being processed?
Example
Customer invoice:
Dr Cash (GL 100001, Cost center 1000, BA 1000) 1000
Cr Customer A 1000
In the credit memo posting screen, upon inputting the document number of the invoice in the invoice reference, the client requires us that the GL account 100001, cost center 1000 and BA 1000 be derived automatically without manual encoding from the user. Meaning all they have to input is the customer number and the invoice reference (doc number). Is this possible? Thanks

Hi
The invoice ref field in credit memo posting is related only with the payment terms. The systems determines the payment term from the original invoices.
This field should be either filled with the original invoice document number or "V".
If the field is left blank, then the system always takes the payment term for credit memo as "Due immediately"
I dont thing there is a provision for copying the line item details as per original invoice document.

How to search this forum by tags, answered questions, and quickly navigate to next/previous posts

New user to these forums. I've read all the Search documentation.
1. How do I search this forum by tags?
2. Is there a way to view just the posts that were answered or where the original poster found some help?
3. Is there a way to quickly move to next/previous posts without having to backtrack to the list of posts and then manually click the next/previous post?
Thanks!

New user to these forums. I've read all the Search documentation.
1. How do I search this forum by tags?
2. Is there a way to view just the posts that were answered or where the original poster found some help?
3. Is there a way to quickly move to next/previous posts without having to backtrack to the list of posts and then manually click the next/previous post?
Thanks!

Previously posted troubleshooting doesn't work for my error message "iTunes could not back up the iPhone because an error occurred". What other options do I have?

Previously posted troubleshooting doesn't work for my error message "iTunes could not back up the iPhone because an error occured". What other options do I have to backup my iPhone data properly?

Hi there kchagape,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
-Griff W.

How do you get firefox 4 to save tabs and windows and restore them? Don't say set preferences to open them on startup or use restore previous session under history; those do not work. Or is it no longer possible to save windows and tabs?

Question
How do you get firefox 4 to save tabs and windows and restore them? Don't say set preferences to open them on startup or use restore previous session under history; those do not work. Or is it no longer possible to save windows and tabs?

'''IT'S A EASY AS IT SHOULD BE.'''
This is essentially paulbruster's answer, but I've added the steps some might assume, but which aren't so obvious to those of us who are new at this, like me.
This solution might ''appear'' to be long and complicated, but after you follow the directions once, you'll find it's quick, clean, and simple. Almost like they designed it this way.
# If you haven't already, open a bunch of tabs on a few different subjects.
# Click the List All Tabs button on the right side of the tab strip.
# Select Tab Groups.
# Create a few groups as described [http://support.mozilla.com/en-US/kb/what-are-tab-groups#w_how-do-i-create-a-tab-group here] , i.e. just drag them out of the main thumbnail group into the new groups they create.
# Now click on any thumbnail in any new group, but not the original big default group you may have left some tabs in.
#A regular Firefox window will open, but'' only the tabs in that group will be visible.'' You also now have the Tab Groups button in the tab strip.
# Right click on any tab, and there it is: Bookmark All Tabs. Click on it in the list of options. Or you can hit Ctrl+Shift+D instead and go straight to the dialogue box from the tab without any clicks. But don't go looking for this familiar option anywhere else, 'cause it's not there.
# Now pick an existing folder or create a new one just like you would have before and '''shlpam!''' there they are. New folders are supposed to end up in the Unsorted category all the way at the very bottom, but for some reason mine show up at the bottom of my last sorted category.
# DO NOT CLICK THE UPPER-RIGHTMOST X to close this group of tabs. This will close ALL of your tabs in all groups, currently visible or not. At least it asks if you're sure first. Instead, click your new Tab Groups button to return to the Boxes 'O Thumbnails window, and click the X in the group box you just bookmarked.
# Click on another thumbnail to repeat the process with another group, or click on a thumbnail in the big default box to return to the original FF window. You can also click the Tab Groups button at the upper right, or Ctrl+Shift+E, which will also get you ''into'' the Boxes 'O Nails window ''from'' FF.
# So now when you reopen FF after shutdown, simply select your folder from your Bookmarks and Open All in Tabs. '''Just like paulbruster said. '''

How do I delete a previous post?

I'd like to delete a previous post of mine, but it's been up for long enough that I can no longer edit it myself. Do I have to contact a moderator? If so, how do I do that?
Thanks...

Unless there's something that for a privacy reason you want the information removed, just ignore it. Once people stop responding, the thread will eventually archive off the form. If you included contact information in the post or there's some other important reason you need it removed, you can post here:
http://discussions.apple.com/forum.jspa?forumID=1076
and ask a Discussions Host to remove the problem post.
Regards.

Can someone help with a previous post labeled "Writing to a data file with time stamp - Help! "

Can someone possibly help with a previous post labeled "Writing to a data file with time stamp - Help! "
Thanks

whats the problem?
Aquaphire
---USING LABVIEW 6.1---

Continuation of previous post under JiKeidan

Similar Messages

Maybe you are looking for