Continue background job processing.
Hi All,
How to handle the system error
MESSAGE E328 WITH MATNR RAISING CONVERSION_NOT_FOUND thrown by FM MATERIAL_UNIT_CONVERSION so that the background job continue processing.
Thanks and Regards,
Ashik K.
Hi,
I just now checked with this FM and worked with these two options:
1. Runtime error type 'E' will stop the program if we COMMENT the EXCEPTIONS while calling FM
* EXCEPTIONS
* CONVERSION_NOT_FOUND = 1
* INPUT_INVALID = 2
* MATERIAL_NOT_FOUND = 3
* MEINH_NOT_FOUND = 4
* MEINS_MISSING = 5
* NO_MEINH = 6
* OUTPUT_INVALID = 7
* OVERFLOW = 8
* OTHERS = 9
2. Runtime error type 'E' (which stops the program) will not come in this case
EXCEPTIONS
CONVERSION_NOT_FOUND = 1
INPUT_INVALID = 2
MATERIAL_NOT_FOUND = 3
MEINH_NOT_FOUND = 4
MEINS_MISSING = 5
NO_MEINH = 6
OUTPUT_INVALID = 7
OVERFLOW = 8
OTHERS = 9
Hope this helps.
Regards,
Amit Mittal.
Similar Messages
-
Error in Background Job Processing.
Dear All,
I am using a background job for processing the outbound delivery.
In the user exit in delivery program I am checking for the combination of
ship to party, Material & Batch of outbound delivery in a ztable. If the combination exists in
Ztable I do not want to save & ignore this delivery creation and continue with the next
delivery order creation thru the batch job.
However I need to give an error / warning message for the delivery orders
which are not created so I am giving the error message as success message
in the below format :-
IF L_RETURN-TYPE = 'E'.
MESSAGE S000(Z64_I) WITH L_RETURN-MESSAGE_V1
L_RETURN-MESSAGE_V2
L_RETURN-MESSAGE_V3
L_RETURN-MESSAGE_V4
DISPLAY LIKE 'E'.
PERFORM FOLGE_GLEICHSETZEN(SAPLV00F).
FCODE = 'ENT1'.
SET SCREEN SYST-DYNNR.
LEAVE SCREEN.
ENDIF.
But my job is finished as soon as the above message is encountered and the
rest of the outbound deliveries are not created.
However if I execute the progarm in foreground the execution is working fine.
Could you please let me know what do I need to code / do corrections to make
the program run successfully in background.
Thanks & Regards
Jitendra GujarathiHello,
Check system log and also check work process trace, to know the error.
I feel that it could be Authorization issue, you don't have sufficient authorization to do.
Hope this helps.
Regards
venkata
Edited by: venkata emandi on Sep 12, 2011 8:13 AM -
After writing a report, I used this Function Module LIST_TO_ASCI to copy my report to an internal table (DOWNTAB) because Ill use that internal table to download a text file on the server using dataset.
Here is my code:
FORM DL_REP_SERVER.
DATA: ABAP_LIST LIKE ABAPLIST OCCURS 1,
MV_FILE2 LIKE RLGRAP-FILENAME.
DATA: BEGIN OF DOWNTAB OCCURS 1,
LINE(150),
END OF DOWNTAB.
CLEAR: MV_FILE2.
MV_FILE2 = J:/Downloads/Report.txt.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
LIST_INDEX = SY-LSIND
TABLES
LISTASCI = DOWNTAB
LISTOBJECT = ABAP_LIST
EXCEPTIONS
LIST_INDEX_INVALID = 1
OTHERS = 2.
OPEN DATASET MV_FILE2 FOR OUTPUT IN TEXT MODE.
IF SY-SUBRC <> 0.
IF SY-SUBRC = 8.
MESSAGE E037 WITH 'File could not be opened'.
ELSE.
MESSAGE E037 WITH 'Error occurs in downloading the file'.
ENDIF.
ENDIF.
LOOP AT DOWNTAB.
TRANSFER DOWNTAB TO MV_FILE2.
ENDLOOP.
CLOSE DATASET MV_FILE2.
ENDFORM. " DL_REP_SERVER
My big problem is this, when Im running my program ordinarily (not as background job), Im getting all the pages downloaded correctly but when I run it as background job (using SM36), Im only getting the last page of my report being downloaded. Definitely, I cant debug it because its in background. I cant figure out why. Hope that I stated my problem clearly. Any help would be greatly appreciated. Thanks.You can debug batch jobs by going to 'SM37', type in 'JDBG' in the
command line ( no '/' ), put the cursor on the job and press enter - will
take you to the job in debug mode.
You can do this only after the job has finished execution. This will simulate the exact background scenario with the same selection screen values as used in the job also sy-batch will set to 'X'.
So type in the transaction code 'JDBG' and place your cursor on the job after It has finished. It will take you to a SAP program in debug mode. Step through this program which is about 10 lines, after this your program will be executed in the debug mode.
Steps
1. Create variant called BACKGROUND for program to be debugged.
2. Execute ZDEBUGBG (pgm code below) in background for immediate processing.
3. Execute transaction SM50.
4. Select process that runs ZDEBUGBG.
5. Goto 'Program/Session' 'Program' 'Debugging'.
A se80 debug session will open.
6. Change variable W_EXIT to 'E'.
7. Step thru (F6) until ZWBTEST comes up.
1. Go to Transaction SM66 and find your work porocess.
Select the line work process is on and click on the Debugging button.
If this is a custom program, you can put a wait statement in the code to buy yourself sometime.
2. Go to Transaction SM50. From the tool bar "Program/session"->Program->Debugging.
goto SM37 and from Program menu(not sure.. try other menu's)
-->Catchjob . it will goto the active job in debugging mode. -
Background Job Processing Spool Retention period
Hi ,
In my program i am calling another ABAP program and sumitting the same as a background job(using Job_Submit,Close etc.)
In this case i can view the Spool generated by the called program(using sm37).
But this spool exists for a very less period in the system.Is it possible to specify a retention period,as 90 days in my case.?
Pls Help !!!
Answers will be rewarded.
Regards,
Rohanhi Roahn,
You must set print parameters before the printing process starts.
When printing lists after creating them, the system uses the print format specified in the print parameters to split the completed list and fit it onto the print pages, truncating it if necessary.
When printing lists while creating them, the system uses the print format to actually format the list in the program.
Print parameters are set either interactively by the user or from within the program.
For each print process, the spool system needs a complete and consistent set of print parameters. In ABAP, the structure PRI_PARAMS (ABAP Dictionary) represent a set of print parameters.
When passing the print parameters interactively, the system displays a dialog box after starting the report, on which the user has to enter the most important print parameters.
It's shown below which input field of the Print List Output dialog window conform to which PRI_PARAMS component.
Input field----
Retention period
Component-------PEXPI
Meaning----
Number of days for which the system holds the spool request before deleting it. (Default value: 8). -
Hi Experts,
I have a requirement , where a program need to be executed as a continuous job. In the logic of the program, there is a
'Do.. EndDo' , which would be continuously running.
I have set the program as a background job, where I have a single step , which would execute the Report.
As the report has a never ending loop, it would keep running.
Now I am facing a problem. In the job log, it keeps on updating the message '1 step(s) found ( ABAP_PROGRAM: XXX ; ABAP_VARIANT: ; EXT_PROGRAM: ; STATUS: R ) '.
Though I have a single step, it is updating the message for every 20 secs in the log.
And also, I am thinking , if the job log gets overflowed or any memory issue .
Please suggest, how to stop the job log updating the same message.
Thanks & Regards,
LalithaThanks for the valuable inputs.
I have commit statement in the program. Regarding the point that 'The visibility of the job log messages is controlled by program commits.' , but I am not getting, why the message is getting repeated.
Basically the program flow is like this.
Program continuous_report.
wait for 10 sec.
Do..
Commit work.
Enddo.
The log message is that...
16.12.2010 05:31:20 Job started
16.12.2010 05:31:20 Step 001 started (program Continuous_Report, variant , user ID XXX)
16.12.2010 05:31:30 1 step(s) found ( ABAP_PROGRAM: Continuous_Report,; ABAP_VARIANT: ; EXT_PROGRAM: ; STATUS: R )
16.12.2010 05:31:56 1 step(s) found ( ABAP_PROGRAM: Continuous_Report, ; ABAP_VARIANT: ; EXT_PROGRAM: ; STATUS: R )
16.12.2010 05:32:17 1 step(s) found ( ABAP_PROGRAM: Continuous_Report, ; ABAP_VARIANT: ; EXT_PROGRAM: ; STATUS: R )
16.12.2010 05:32:39 1 step(s) found ( ABAP_PROGRAM: Continuous_Report, ; ABAP_VARIANT: ; EXT_PROGRAM: ; STATUS: R )
Thanks & Regards,
Lalitha -
Background Jobs - Process Chains
Hello,
I want to schedule a background job for a process chain so that it triggers the process type and start executing...
Can anyone please let me know how i can do it?HI,
The background control options are available to directly schedule the start process. You can start the process chain immediately (when activating the process chain), at a specified time, or after a particular event. When you activate the process chain the start process is scheduled in the background, as defined in your selections.
If there are not sufficient options available, you can trigger the start of the process chain using API. You can use the SAP NetWeaver Scheduling Framework to start the chain and to have more extensive scheduling options.
You can also trigger the start of a process chain using a metachain. A metachain is a process chain, for which you determine this start condition, that is fixed to another process chain. The process chain is started directly by this metachain.
Tarak -
RSCRMBW_REPORT Background Jobs & Process Chain
Hello Everyone,
I have a program in a process chain that runs a query through rscrmbw_report. The program is the first step in the chain, followed by a DTP. When we have previously ran this program in our production box, we found that the we did not get all of the data from the query. We believe the fault is with the DTP running asynchronous to the background jobs of RSCRMBW_REPORT- In SM37, we believe we have found jobs from the report positioned before and after the DTP job.
I've made some slight changes and on a small volume of data (~1000), the chain works with no issue. However, I am concerned with dealing with a large number of records (~1,000,000+). As of now, I'm not sure I believe the analysis of the background jobs because there are still jobs that appear before and after the DTP, but the data is consistant between the destination of the DTP and the query.
Any advice on how to ensure those jobs run before my DTP? I've tried using commit work and wait, which I believe works because the DB should be open while the query jobs are running and I believe that the statement will wait for those jobs to finish before proceeding out of the code and to the DTP.
Thanks & Regards,
ChristianHI,
The background control options are available to directly schedule the start process. You can start the process chain immediately (when activating the process chain), at a specified time, or after a particular event. When you activate the process chain the start process is scheduled in the background, as defined in your selections.
If there are not sufficient options available, you can trigger the start of the process chain using API. You can use the SAP NetWeaver Scheduling Framework to start the chain and to have more extensive scheduling options.
You can also trigger the start of a process chain using a metachain. A metachain is a process chain, for which you determine this start condition, that is fixed to another process chain. The process chain is started directly by this metachain.
Tarak -
How to cancel the background job processing in ABAP programming?
Hi,
I have a requirement where i need to cancel the job depending on some constraint. My code is something like this:
Select some data from the table.
if sy-subrc = 0.
Do nothing.
Else
Cancel the job
call function 'BP_JOB_ABORT'
exporting
jobcount = number
jobname = name
EXCEPTIONS
CHECKING_OF_JOB_HAS_FAILED = 1
JOB_ABORT_HAS_FAILED = 2
JOB_DOES_NOT_EXIST = 3
JOB_IS_NOT_ACTIVE = 4
NO_ABORT_PRIVILEGE_GIVEN = 5
OTHERS = 6
The above code is cancelling the job but it is throwing an exception called CX_SY_DYN_CALL_PARAM_MISSING because i dint pass job count. How can we find the job count of next job that is going to run? Or How to handle the exception which it is throwing. Even if i try to handle that exception something like this:
TRY
call function 'BP_JOB_ABORT'
exporting
jobcount = number
jobname = name
EXCEPTIONS
CHECKING_OF_JOB_HAS_FAILED = 1
JOB_ABORT_HAS_FAILED = 2
JOB_DOES_NOT_EXIST = 3
JOB_IS_NOT_ACTIVE = 4
NO_ABORT_PRIVILEGE_GIVEN = 5
OTHERS = 6
RAISE EXCEPTION TYPE CX_SY_DYN_CALL_PARAM_MISSING.
CATCH
CX_SY_DYN_CALL_PARAM_MISSING.
ENDTRY.
It avoids the exception but it doesnt cancel the job. I even tried with function modules like JOB_OPEN
JOB_SUBMIT,BP_JOB_SELECT,BP_JOB_ABORT and tried to build some logic using status overview table (TBTCO) and TBTCP (Jobstep overview table).
Can someone suggest me the right way to write this program ?
Thanks in advance.
RashmiHi,
Problem is solved.
Create an background job with 2 steps. The first step in the background job calls the program ZBACKJOB_STEP1. In the variant we have a wrong material number
If the material number is not found in Mara, the next step in the job should not get executed and the job should get cancelled..
In the above posts i had asked how do I get the job count of the job that is currently triggering the program at the runtimeu2026..If u see the below code uu2019ll get to know.. We have to use the standard structure TBTCM which captures the properties/characteristics of the job.
REPORT ZBACKJOB_STEP1.
TABLES: MARA,TBTCM.
PARAMETERS : MATNR TYPE MATNR.
START-OF-SELECTION.
SELECT SINGLE * FROM MARA WHERE MATNR = MATNR.
IF SY-SUBRC IS INITIAL.
WRITE / : 'This is the material selected on the selection-screen' , MARA-MATNR.
ELSE.
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
EVENTID = TBTCM-EVENTID
EVENTPARM = TBTCM-EVENTPARM
EXTERNAL_PROGRAM_ACTIVE = TBTCM-XPGACTIVE
JOBCOUNT = TBTCM-JOBCOUNT
JOBNAME = TBTCM-JOBNAME
STEPCOUNT = TBTCM-STEPCOUNT
EXCEPTIONS
NO_RUNTIME_INFO = 1
OTHERS = 2.
IF SY-SUBRC = 0.
CALL FUNCTION 'BP_JOB_ABORT'
EXPORTING
JOBCOUNT = TBTCM-JOBCOUNT
JOBNAME = TBTCM-JOBNAME
EXCEPTIONS
CHECKING_OF_JOB_HAS_FAILED = 1
JOB_ABORT_HAS_FAILED = 2
JOB_DOES_NOT_EXIST = 3
JOB_IS_NOT_ACTIVE = 4
NO_ABORT_PRIVILEGE_GIVEN = 5
OTHERS = 6.
IF SY-SUBRC <> 0.
ENDIF.
ENDIF.
ENDIF.
Regards,
Rashmi -
Background Job Processing/Spool List Recipient
When setting up a report to run as a background job and setting it up to e-mail the results via the Spool List Recipient button, it always sends the results in htm format. Is there a way it can be e-mailed in Excel?
hi swapna.
in scot it is not configured as excel how to do it.to get an attachment in excel format
thanks in advance -
JOB_CLOSE and Background Job Process a FM
HI Guys,
I have my code like this:
data: jobname like tbtcjob-jobname value
'TESTJOB'.
data: jobcount like tbtcjob-jobcount,
host like msxxlist-host.
data: begin of starttime.
include structure tbtcstrt.
data: end of starttime.
data: starttimeimmediate like btch0000-char1.
Job open
call function 'JOB_OPEN'
exporting
delanfrep = ' '
jobgroup = ' '
jobname = jobname
sdlstrtdt = sy-datum
sdlstrttm = sy-uzeit
importing
jobcount = jobcount
exceptions
cant_create_job = 01
invalid_job_data = 02
jobname_missing = 03.
if sy-subrc ne 0.
"error processing
endif.
data: lv_weekday type WEEK_DAY.
CALL FUNCTION 'DATE_TO_DAY'
EXPORTING
DATE = sy-datum
IMPORTING
WEEKDAY = lv_weekday.
Close job
starttime-sdlstrtdt = sy-datum.
starttime-sdlstrttm = SY-UZEIT.
call function 'JOB_CLOSE'
exporting
event_id = starttime-eventid
event_param = starttime-eventparm
event_periodic = starttime-periodic
jobcount = jobcount
jobname = jobname
laststrtdt = starttime-laststrtdt
laststrttm = starttime-laststrttm
prddays = 1
prdhours = 0
prdmins = 0
prdmonths = 0
prdweeks = 0
sdlstrtdt = starttime-sdlstrtdt
sdlstrttm = starttime-sdlstrttm
strtimmed = 'X' "starttimeimmediate
targetsystem = host
exceptions
cant_start_immediate = 01
invalid_startdate = 02
jobname_missing = 03
job_close_failed = 04
job_nosteps = 05
job_notex = 06
lock_failed = 07
others = 99.
if sy-subrc eq 0.
"error processing
endif.
This is the Program I want the Batch Job to Execute a BAPI Function Module in the Place of DATE_TO_DAY function module. Is it Possible ??????
And also I get an error at the JOB_CLOSE Function Module with SY-SUBRC = 5.
Can anyone know why this is happening and what should be done to overcome this.
Thanks & Regards,
YJR.Hi Ravi,
The below code which has an EXPORT and IMPORT commands
The IMPORT does'nt work in Background.
Do I need to do anything else.
REPORT ZTEST_LM22.
DATA: LV_NAME(10) TYPE C.
LV_NAME = 'HELLO'.
export lv_name to memory id 'ZNAM'.
submit ztest_lm22_a.
REPORT ZTEST_LM22_A.
DATA: GV_JOBNAME TYPE BTCJOB VALUE 'TEST_UNPACK',
GV_JOBCOUNT TYPE BTCJOBCNT.
data: lv_date type SYDATUM,
lv_time type SYUZEIT.
lv_date = SY-datum.
lv_time = sy-uzeit.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
JOBNAME = GV_JOBNAME
SDLSTRTDT = lv_date
SDLSTRTTM = lv_time
IMPORTING
JOBCOUNT = GV_JOBCOUNT
EXCEPTIONS
CANT_CREATE_JOB = 1
INVALID_JOB_DATA = 2
JOBNAME_MISSING = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SUBMIT ztest_lm22_b AND RETURN
VIA JOB GV_JOBNAME
NUMBER GV_JOBCOUNT.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
JOBCOUNT = GV_JOBCOUNT
JOBNAME = GV_JOBNAME
STRTIMMED = 'X'
EXCEPTIONS
CANT_START_IMMEDIATE = 1
INVALID_STARTDATE = 2
JOBNAME_MISSING = 3
JOB_CLOSE_FAILED = 4
JOB_NOSTEPS = 5
JOB_NOTEX = 6
LOCK_FAILED = 7
INVALID_TARGET = 8
OTHERS = 9.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REPORT ZTEST_LM22_B.
DATA: LV_NAME(10) TYPE C,
GV_NAME(10) TYPE C.
IMPORT LV_NAME = GV_NAME FROM MEMORY ID 'ZNAM'.
WRITE: GV_NAME.
If you see in SM37 the Spool does'nt have this value.
Could you just run a quick test and see what else should be done...
Thanks & Regards,
YJR. -
Background job processing - SM36
Hi All,
I need to schedule a job in the background(using SM36) . The report should run in the night from the last day of the month to the first day of the next month. What are the stepts to be followed in SM36 to achieve this?
Thanks ,
VasukiHi,
>Go to transaction SM36, give job name and select job class.
> select start condition tab present at the left top corner. now select date and time tab. give start datae and time also end date and time. next select periodic values and select the period. check and save the
> select Step tab present at the left corner, give ABAP program name and variant for that program. check and save .
> fiinally Save the job.
Regards,
Lokeswari. -
About Background job scheduling
One file will be coming from oracle system. it would be stored at a particular path.
I want to schedule for background job processing. how to do.Hi,
You need to write a Program to place the file in the Application server, then only you can schedule a background job, you need to use the OPEN dataset, CLOSE DATASETS to do this one, then you can schedule the job .
To schedule a job in the background job, look at the below links
Re: background job schedule
http://aspalliance.com/1129_Background_Processing_SAP_R3_System
Regards
Sudheer -
Hi,
I try to create 2013 FY in "Setting for Each FY" in OKEQ - Maintain Versions unfortunately I have created Null FY, try to delete Null FY on the time it will ask Job schedule, I have cancelled the job & reopen Maintain Versions (OKEQ) screen on the time system populated the msg "Background Job still running - Data can be displayed only"
In Settings for Each FY screen there is no New Entries button, all FY are blocked status, changes was not allowed.
How can I resolve it.
Waiting for your valuable suggestions.
Regards,
Nageswar.Dear Rajneesh Saxena
Thanks for your prompt reply.
Yes you are correct, on the time of deletion it will ask Background Job Process, for immediate deletion must & should select "NO".
While "Settings for Each FY" screen populates message "Background Job Still Running - Data Can Be Displayed Only" open screen in display mode enter the command "=KILL" in command bar press enter, then you will allow to changes get New Entries button also.
Problem is solved
Regards,
Nageswar. -
Execution of Macro in Background job
We have created a macro in APO DP that uses 4 characteristics and a key figure. As part of the macro we are executing a Z-function that we have created. The problem occurs when executing the macro in a background job. When the background job is executed the macro processes correctly (performs the correct calculations) for the first CVC that is processes, but it is not able to process the rest of the CVCs.
<b>ERROR: "There are no plannable characteristic combinations",</b>
The function copies data from the CVC that is being processed (source CVC) to another CVC (target CVC). The values for the target CVC to which the data has to be copied for a particular key figure are determined from the paramaters that are given to the function in the macro.
The steps followed in the function are the following:
1- Determine the relation between source and target CVC, ie, from the source CVC that is being processes in the macro, the function determines the target CVC to which the data has to be copied.
2- Call BAPI "BAPI_PBSRVAPS_GETDETAIL2" to retrieve the valuesthat are in the Planning Book for the source CVC.
3- Perform the addition of data (value retrieved from the source CVC is added to the target CVC).
4- Write value to the target CVC using BAPI "BAPI_PBSRVAPS_CHANGEKEYFIGVAL2".
When using the BAPIs the aggregation level used is the same aggregation as the one specified in the Background job used for the execution of the macro.
This macro is executed in a background job, and the copy/calculation is performed correctly for the first CVC (first CVC contained in the data selection used in the background job) processed, but then it does not do anything else for the rest of CVC's. The error message given by the log of the background job is <b>"There are no plannable characteristic combinations",</b> when in fact, the characteristic combinations do exist in the Planning Object Structure.Hi Ian
There are not any other macros in the planning book.
In addition, if we execute the macro in interactive mode we have another error at the end of the execution (after doing all the combinations):
<b>Invalid data status</b>.
and we don't know why.
Regards -
Background job is taking lot of time for processing the job.
One background job - which is processing Idocs is processing a job for more than 2000+ seconds.. and completed tho.
But this is happening for the past few days.. is there any way to trouble shoot, or find from any logs of this completed job, to find out why it was taking lot of time for processing.
Can you please tell me the steps of analyzing / trouble shooting why it was taking lot of time daily.
Regards,
Satish.Hi Satish,
Run DB stat from db13 it will improve the performance.
Check number of idocs. You can send part by part, instead of sending huge data.
Check SM58 logs
Suman
Maybe you are looking for
-
Who can explain how EJB connect to Oracle9i DB with DataSource?
I have taken 4 days into this problem. I am developing EJB with J2EE1.3 and Oracle9i DB, I can connect to DB in code with DriverManager. But I want to use DataSource to connect to DB. I failed, I can not get new way to resolve it when I after try to
-
HP Envy 15 Notebook PC battery does not charge
Hello, I have had this HP PC for around a year now, and it never failed me in anything. It's really great and fast and all, and no problems what so ever. Today I came back from travell, and I tried to charge my PC. It would charge for around 10 sec
-
How to create multiple component instances at runtime using java
Hi, I need to create component instances at runtime using java.I found ComponentSet.add method.But I am not finding a way to get handle of ComponentSet. I see methods with params of IRuntimeNode.But how to get ComponentSet from IRuntimeNode. If anybo
-
Hello.. I've been an iPhone owner for about two weeks now and I am on my second iPhone. The first one had an issue where the back light would not stop flickering. My current iPhone has a problem where if I change the equalizer settings to anything ot
-
Final cut pro not exporting my movie
My movie that I worked hard for is not exporting when I click export movie or when I try to upload it to Youtube I get an error please help me