Continue from Quiz Problem

For my project, after the end user completes the quiz, when
they "Click anywhere to continue" I want the next URL to open in
the current window, not a new window.
I have established the following settings under
Edit/Preferences/Project/Start and End:
Project End Options:
Action: Open URL or File
Open URL or File: A URL link with browser option set to
"Current"
The current Quiz/Pass or Fail settings are:
If passing grade:
Action: Continue
At one point I had also tried for the Quiz/Pass or Fail
settings:
Open URL or File: A URL link with browser option set to
"Current"
No combination of the three has seemed to work successfully
to have the URL open in the same browser window; it keeps opening
in a new window.
I am still pretty new at using Adobe Captivate, so any
suggestions would be grately appreciated.
Thanks!
Suzanna

Hi Suzanna and welcome to our community
What version of Captivate are you using? I'm using version 3
and tested this in both IE and Firefox and both versions seem to
behave as you are wanting.
I guess I should also ask what your output is. Is it .SWF or
.EXE. If it's .EXE, I'm doubtful you will be able to avoid the
separate browser window.
Cheers... Rick

Similar Messages

  • Continuing Kernal Panic Problem

    Since my previous post - http://discussions.apple.com/thread.jspa?threadID=1153209 - I regret that I continue to get the dreaded 'Kernal Panic' and minor HDD corruption.
    After taking out the Factory Installed RAM and leaving the new Crucial 512 mb card in seemed to work for a while but the problem persists making the eMac almost unusable.
    I wonder if something is loading up with the 'System' on start up and is screwing around with things. I still get the minor disc error and Disk Warrior reports a particular file with strange Chinese looking characters in the name as being damaged beyond repair. Unfortunately DW won't let me copy the report so I may post it here. Something about text encoding.
    I would try to find the file and move it elsewhere in case it is a .plist file that gets re-written but it's invisible and in Chinese so I can't just type its name to locate it. I'm not sure if this file is the problem anyway. It may have resulted from the problem, if you get my gist.
    The HDD has been checked over numerous times with TechTool Pro 4 and Disk Warrior. The former programme has been used to do a 'surface scan' of the HDD on three occasions and has never found any 'bad blocks' and such. One thing occurs to me now. I need to change the RAM from slot J2 to J1 next. I will try that tomorrow.

    dreed2 wrote:
    Do you get the KP if you start up with nothing connected except for the keyboard and mouse?
    Yes. At the moment that is all that is connected.
    Thanks for the Language suggestion. I tried this some time ago and almost cocked it up by deleting files I wanted to keep - and vice versa. Misunderstood the instructions and did the opposite of what I needed to do. I managed to stop the programme in time however before the machine became unusable.
    If re-installing Tiger (by Archive and install) can replace any English language files that may have been deleted, I will try reinstalling once again. I think I may have already tried doing this, but it won't hurt to have another go. I will switch RAM slots before I try re-installing Tiger again to see if that does anything.
    I note that I can 'Safe Boot' ok.

  • Burner not working, 8.98 GB free, can this 2003/2004 imac model be cleaned for better use or will I continue to have problems?  Do I need to just buy a new one?

    burner not working, 8.98 GB free, can this 2003/2004 imac model be cleaned for better use or will I continue to have problems?  Do I need to just buy a new one?  I remember with a PC being able to defrag.

    You could buy an external dvd/cd drive.
    Suggest other world computing.
    You need to delete some files.  Many posters to these forums state that you need much more free space: 5 gig to 10 gig or 10 percent of you hd size.
    (0)
    Be careful when deleting files. A lot of people have trashed their system when deleting things. Place things in trash. Reboot & run your applications. Empty trash.
    Go after large files that you have created & know what they are.  Do not delete small files that are in a folder you do not know what the folder is for. Anything that is less than a megabyte is a small file these days.
    (1)
    Run
    OmniDiskSweeper
    "The simple, fast way to save disk space"
    OmniDiskSweeper is now free!
    http://www.omnigroup.com/applications/omnidisksweeper/download/
    This will give you a list of files and folders sorted by size. Go after things you know that are big.
    (2)
    This will save you a gig of space.
    Monolingual is a program for removing unnecessary language resources from Mac OS X,in order to reclaim several hundred megabytes of disk space. It requires at least Mac OS X 10.3.9 (Panther) and also works on Mac OS X 10.4 (Tiger). It worked for me on 10.4
    http://monolingual.sourceforge.net/
    A detailed write-up on how to use Monolingual:
    http://www.jklstudios.com/misc/monolingual.html
    (3)
    These pages have some hints on freeing up space:
    http://thexlab.com/faqs/freeingspace.html
    http://www.macmaps.com/diskfull.html
    (4)
    Buy an external firewire harddrive.
    (5)
    Buy a flash card.

  • Please can anyone help with the continuing password rejection problem with email.Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

    Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

    I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
    On the password and keychain issue that your post is all about.  I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
    The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
    Two tips I can share, at least with webmail access:
    1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
    2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
         I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
    Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
    BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
    From my experimentation, here's my observation:
    1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
    2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
    The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta.

  • How can I code to play audio continuously from page to page in iBooks for reflow ePub

    Hi,
    I have tried and successfully completed the iBooks ambient soundtrack option in Fixed Layout ePub. It works fine.
    But while trying the same in Reflow ePub, it is not working in iPad iBooks. I have latest iBooks version and latest iOS version in my iPad.
    Please let me know how can I code to play audio continuously from page to page in iBooks for reflow ePub?
    Thanks,
    Sundaram

    As soon as the user turns to the next page, the audio stops.
    That's how it works in all cases.
    the book is a read aloud book.
    See the 'How-To Read Aloud' section in iBA Tips and Tricks 01

  • HT201210 nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and somet

    nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and sometime just hear from other user that it 's difficult to use then force they change phone that use to handle to another.

    It is a feature to discourage the theft of iPhones by making them useless if resold. It's not going anywhere. It's simple: just don't buy a phone until you make sure that the activation lock has been disabled.

  • How to get audio to continue from page to page

    I need background audio to my website but I want it to play
    continuously from page to page. The site is HTML based not Flash
    but the audio controls will be Flash. What options do I have: I
    know that frames will do it. Is there anything else straightforward
    without getting into Ajax.

    rprprprprp wrote:
    > I need background audio to my website but I want it to
    play continuously from
    > page to page. The site is HTML based not Flash but the
    audio controls will be
    > Flash. What options do I have: I know that frames will
    do it. Is there anything
    > else straightforward without getting into Ajax.
    No, there is no straight forward solution.
    Bottom line is once flash movie is closed, it stops it sound
    and restarts the next
    time you reopen. In order to play it uninterrupted, you can't
    close it.
    Frames will be the easiest and the only way to go if you have
    multiple HTML documents.

  • RMAN Restore - continue from a failed point?

    Hi All,
    While cloning a db using RMAN, We get
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 07/10/2008 01:53:12
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06136: ORACLE error from auxiliary database: ORA-00344: unable to re-create online log '/rcatsi/oradata/data02/data03/log1a.dbf'
    ORA-27040: file create error, unable to create file
    IBM AIX RISC System/6000 Error: 2: No such file or directory
    Recovery Manager complete.
    I realized that, I had given an incorrect location for the logfile. The database is restored, control file created, while opening the db I see this error. Is it possible to continue with the clone using rman without having to restart the whole clone. I know it can be done manually using create control file and manually applying the archives. However, Is there a way to continue the clone in rman by specifying the correct location for the logfile?
    -Ritesh

    The directory name was incorrect. I corrected it and re-ran the script. But it started the clone right from the scratch....Instead of continuing from the point it failed..
    Did you use LOG_FILE_NAME_CONVERT (possibly
    incorrectly)? Is that directory name correct? You
    have data02 and data03 beneath it?

  • Hello I suffer from a problem with your MacBook  There is a black line in screen

    Hello
    I suffer from a problem with your MacBook
    There is a black line in screen
    http://i48.tinypic.com/35apzz8.png

    Is the line always present? If you boot up the MacBook holding down the option key during startup so that you get to the startup manager, is the line still there?
    If so you have a hardware issue and it needs to be repaired. Contact Apple using their Express Lane if you live in a country where that is available, or call the appropriate phone number on this page if not. You can also take the MacBook in to an Apple store or service provider.
    Best of luck.

  • How can I change the appearance and text on 'Continue from where you stopped last time?' dialogue

    Hi,
    I would like to change the appearance (color, header and text) of the 'Continue from where you stopped last time?' dialogue
    Could you please help me where to find the files to be edited and how to do so.
    Thanks in advance for your help!!!
    Stephanie

    Hi Stephanie,
    Unfortunately there is no way to change the text or appearance of this dialog box. You are stuck with it as is.
    www.cpguru.com - Adobe Captivate Widgets, Tutorials, Tips and Tricks and much more..

  • Using finder icon to navigate continuously from folder to folder

    A consultant set our old G5 (OS 10.4.11) so you could click and hold on the finder icon to open the HD and navigate continuously from folder thru subfolder, thru subfolder, thru subfolder, etc (like dragging and dropping a file – except without the file). Wanted to set my Intel Mac to do the same.  Messed up the old computer trying to figure out what the consultant had done (I think he altered sidebar options in finder preferences).  Now, when I click and hold on the finder a little window opens with the name of the computer, and below it says "hide."  (On my Intel Mac it just says "hide")  Wife's gonna kill me!  How do I restore old G4?  Can I get my G5 to open folders the way the G4 did, by just holding down on the finder icon?

    Thanks Kappy,
    I do get the "pop" feature when I drag my HD icon to the dock, next to the trash, but when using the "pop" feature I have to click on each individual subfolder I need to open to get to my destination.  The way our G4 worked required only a single click on the Finder icon.  By clicking on it, and then keeping the mouse held down, the HD would open, showing all its folders.  Dragging the mouse arrow to any single folder opened its window to reveal its subfolders.  Dragging to one of those folders opened its window, allowing you to drag to the next subfolder and the next - down the entire hierarchy to reach any sought-for file, without having to do any more clicking.  Do you know a way to restore that feature to the G4?   Any way to get it to work on my Intel Mac?
    Thanks in advance.

  • Solved restarting from sleep problem myself.

    Let me tell my case. i have had never problem on restart from sleep.
    because i always use my new octacore 2.8 with TIGER.
    there is some two major reason.
    1, performance is better than Leopard. Leopard is heavier when , mouse movement, some 3d application's rendering speed, and even drag n drop folder etc.
    2, some application i use still run well on Tiger. apple did not consider compatibility with older application at all.
    Because apple did not want user install tiger on new 2008 macpro, i must put out pre-installed tiger HDD from another mac and put into new mac. and it works well. any sleep from restart problem at all. problem is graphic card. i have 2600HD and 1900 XT. if i connect 2600HD, i can't accelerate GPU power in Tiger. it works only in Leopard.and even in sleep mode, but graphic cards fan always run.
    but when i boot use bootcamp to XP, i must connect to 2600HD. 1900XT did not display screen at all. like this i use 2 graphic card.
    I can't sure this problem due to hardware or OS problem, but obvious thing is tiger have never the problem. little problem is card's fan always run even in sleep mode. hope my case could be a clue.

    New firmware has come. and positive reply posting. good job
    i wonder if this new firmware destroy booting Tiger feature or not.
    i must use tiger now. hope apple do not disable tiger running in new macpro.
    any comment will be thanks.

  • Adobe presenter 8 quiz problem

    The default option for my quizzes had the font too small to see the text of the questions. When I made the font of the questions larger, the circles for clicking, the letters of the questions, and the question texts all ran into each other.
    So I have a question:
    1) Is there a way to change the theme or profile--I cannot tell which--on just the quiz questions? And if so, how?
    THANK YOU!

    That is not the problem, but thanks.
    I have changed the size of the font and when I do that, the box to 
    check, the letter that numbers the answer, and the question all run 
    together. It appears that the size of the letters have been enlarged 
    but not the spaces between them. Any ideas?
    I think it is possible that i could change this all by inserting a new 
    master slide into the presentation before the quiz, but I cannot seem 
    to do that.
    Thank you.
    Quoting alpi agarwal <[email protected]>:
    alpi agarwal http://forums.adobe.com/people/alpi+agarwal created 
    the discussion
    "Re: Adobe presenter 8 quiz problem"
    To view the discussion, visit: 
    http://forums.adobe.com/message/5409679#5409679

  • Display Rows continuously from start to bottom

    Hello All;
    What i need to do is to display 1000 logs coming from the server into 20 rows continuously.Does anyone have any idea??
    I am storing the data strings coming from the server into the vector container. And that i have to display continuously from 0th Row row to 19th row i.e total 20 rows continuously, till the 1000 logs are complete.
    I have 20 rows and i need to display the data in format like, deleting or storing the data from the first row into the vector and then move it continuously from the bottom to top ie if 1st row has 999th log then after 1st fill 19th row has 980th log now after
    that we have to store 999th data in vector and decrement log count from bottom row i.e 19th row like 979,978,977 and so on.
    Please help if anyone has some idea.

    David Sir,
    I want to display all logs starting from last index that is 999 to 0 logs continuously on 20 rows one by one.
    Do you know sir what to do with it and how to display continuously.
    Thanks.
    Here's what I find frustrating about your question.
    I don't know if you're designing a Win32 desktop application, Console application, Web page, or what.  This GREATLY affects what it means to "display" something.  So I'm left to assume that you are writing a native Win32 windows desktop
    application using MFC (I deduce this solely on the appearance of CString in your code.)
    A log is typically a collection of log entries.  1000 logs to me suggests 1000 different collections of log messages, each with multiple rows.  But I have to assume that what you are calling a "log" is what I would call a "log entry"
    or "log message".  (One record in a table of log messages.)  This affects in what manner they would be displayed such as in one column vs multiple columns.
    When you say rows, it typically suggests data tables and database operations.  You haven't said if anything database related is going on.  And although "GetField" looks vaguely ADO-like, I'm going to assume that it is not.  But it
    does suggest to me that your log message is divided into fields, and that you probably want to display columnar data.  The only thing that contradicts that is that I had to look at some of your past posts to figure out that you are writing in native C++
    and that you are (likely) trying to manage a std::vector of strings.  So that suggests to me that each log message is just a simple string.  This means that you probably don't need a table view.
    You haven't really given me a good sense of what you mean by continuously.  You may mean that it updates periodically, or that rows appear one after the other, or that it scrolls with smooth animation.
    What you've said is that you have "20 rows of string field".  I'm not sure if you mean that you have 20 static label controls ... it kind of sounds like that may be what you mean.  But regardless, it sounds like you have "room"
    to display 20 items and you want to display 1000 in that space.  This is where it breaks down for me.  What do you want to have happen?  I'm afraid I just don't get it from your explanation yet.
    You said you were able to display 20 of the 1000 messages but you "don't have any button".  You also said that it is not event driven programming", (which is contrary to my assumption that you are creating a Win32 windows desktop application")
     So I'm not sure what constraint this has placed on you.
    It sounds like you may need to periodically update the screen with either an automatic "next page" feature, or that you want text to scroll by in an animation.
    You'll have to clarify these things if you want help.
    What you DID show me was an incomplete snippet of code with the following features:
    An unused, no-purpose text string variable.
    An undescribed  GetField function and an undescribed SetValueString method of some unknown class.
    I'm trying very hard to help you, but you haven't described this in enough detail for me to do so.
    What aspect of this do you need help with?  What did you try?  And why didn't it work?

  • HT201442 Please let me install version 6.0.1 for 4g because I suffer from the problem of Wi-Fi

    Please let me install version 6.0.1 for 4g because I suffer from the problem of Wi-Fi
    im
    I am now I can not connect via Wi-Fi Remote
    i wish to respond as quickly as possible

    These are user to user support forums. No one here has the ability to allow installing of specific iOS versions.
    Apple has never allowed downgrading of iOS.
    Troubleshoot the issue using basic troubleshooting from the Users Guide. If the Wi-Fi still does not work then it is a hardware issue and no iOS version can correct that.

Maybe you are looking for