Continue the support of the Linux version

I know this is the Windows Ideas forum, but it seems like the only way to get this to your attention. The Linux version of Skype is severely outdated. Since enough people will be making the switch to Linux with Steam machines and Steam OS, you should consider improving that version. You might miss out on customers, if you don't take that opportunity.

Claudius wrote:
Are you using Skype majorly for text chatting or calling?
Depending on where you are located you might want to have a look at the Skype for Web client at http://web.skype.com and see if your Skype acount has already been enabled. Although not tested and supported it might work on your favorite browser.
That's cool that a web interface is coming, but this is still unacceptable.
Let's be honest, Skype for Ubuntu and Linux is HORRIBLE. There is absolutely no other way to describe it. The UI looks like it's from 1999, and since the Microsoft takeover, changes to the Skype client for Linux have been less than minimal. Skype is a cool platform, and I use it for lots of things, and some of us need cross-platform support. It is very apparent that Linux has been very neglected, and let me say, it's not very satisfying.
I don't know what to tell you, besides that someone needs to pass on to the developers that the Linux client is an absolute mess and needs some attention. If you are going to support a platform, you need to make it uniform and just as good as other platforms. It's really kind of silly how a chat platform that is backed by a humongous corporation and has so many resources fails to compete with other chat clients that are free and open source, and are consistent and very usable across multiple platforms.

Similar Messages

  • What are the supported Macintosh Operating System versions for IBM SPSS Statistics 18,19 and 20?   Question  I would like to know what are the supported Macintosh Operating system versions for IBM SPSS Statistics versions 18, 19 and 20? Answer  Please see

    What are the supported Macintosh Operating System versions for IBM SPSS Statistics 18,19 and 20?
    Question
    I would like to know what are the supported Macintosh Operating system versions for IBM SPSS Statistics versions 18, 19 and 20?
    Answer
    Please see the list below:
    - IBM SPSS Statistics 18 and 19 releases are supported on Apple Macintosh OS 10.5 (Leopard) and 10.6 (Snow Leopard) with Intel processor.
    - IBM SPSS Statistics 20 release is supported on Apple Macintosh OS 10.6 (Snow Leopard) and 10.7 (Lion) with Intel processor.
    - The IBM SPSS Statistics versions 18 and 19 are not supported on Mac OS 10.7 (Lion).
    THIS MEANS THAT TO USE LION ONE FIRST HAS TO UPGRADE TO SPSS STATISTICS 20.

    Whilst the 2012-02-15 edition of IBM's matrix does not mention Lion, a few users have noted that:
    • 18.0 can be troublesome
    • an updated version of 18.x should be better.
    Related files
    PASWStatistics_1 803_Mac_Patch.dmg and IBM SPSS Statistics 18.0.3.4 Hotfix Mac.zip are no longer available from the spss.com domain, and I could not find them in an IBM domain. If you download from unofficial sources, proceed with caution.
    Related pages
    In Apple Support Communities:
    • will PASW (SPSS) 18 work with LION
    • PASW statistics 18 crashes every time
    • Java Virtual Machine & SPSS 18 with a question from me.
    Elsewhere:
    • SPSS on Lion « Decorator Pattern
    • SPSS / PASW Mac Patch 18.0.3 and Graphing Fix | The Personal Website of Philip Fizur
    • Patching PASW 18 (or SPSS 18) for Mac OS X (Leopard, Snow Leopard, Lion) to version 18.0.3.1
    • and other sources, including one domain that I treat as reputable but I'll respectfully not share that link here.
    At a glance, you might find that 18.0.3.4 is compatible with Lion.

  • Can you please put me in touch with the support  for the trial copy of adobe acrobat XI pro which I had tried out on March 15 for 30 days. I have  been trying to cancel since the cost is too much and Acrobat Reader is OK for me. I can't find uninstaller.

    Can you please put me in touch with the support  for the trial copy of adobe acrobat XI pro which I had tried out on March 15 for 30 days. I have  been trying to cancel since the cost is too much and Acrobat Reader is OK for me. I can't find uninstaller.
    I have had to erase my disk since then with trouble with Apple Store not recognising my machine and the reload from Time Machine has given complications . Can you please cancel my trial and return my Trial money.

    If you paid for what you used then it was not a trial.
    Look thru the following links and use the chat option if required for your situation:
    Cancel your membership or subscription | Creative Cloud
    https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
    https://forums.adobe.com/thread/1703848
    Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Creative Cloud support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )
    Phone support | Orders, returns exchanges
    http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • Can I still get the support of the first gen iPhone if I buy Applecare?

    Can I still get the support of the first generation iPhone if I buy Applecare? If I can't then can it be replaced by Apple?

    Sorry, but you cannot buy AppleCare after the original one year warranty on your iPhone expired. If your  phone is damaged you can purchase an exchange for a refurbished one.
    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5s. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
    1. iResq or Google for others.
    2. Buy and replace screen yourself: iFixit

  • Hi i was told to come to the support with the error number 16.... for some reason my premiere pro stopped working and i am still paying for i but i had to reinstall it, which i dont know how to do though

    hi i was told to come to the support with the error number 16. for some reason my premiere pro stopped working and i am still paying for i but i had to reinstall it, which i dont know how to do though

    Hi Omid,
    Please refer to the help document below to fix the error 16:
    Configuration error 16 | CC, CS
    If the issue persists, please contact the support:
    Contact Customer Care
    Regards,
    Sheena

  • I tried to do the download of a magazine pays when clicked buy my ipad shows a text saying that I have to communicate with the support of the itunes store. I do not know what I have to do and how.

    I tried to do the download of a magazine pays when clicked buy my ipad shows a text saying that I have to communicate with the support of the itunes store. I do not know what I have to do and how.
    Help me 

    Hi gmoll5,
    Welcome to the Support Communities!
    If you have updated to iTunes 11, click on View > Show Sidebar
    Then, select your playlist and choose File > Print
    You will have the option to print a jewel case like you did before
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649http://support.apple.com/kb/HT5649
    iTunes 11 for Windows: Create your own CDs and DVDs
    http://support.apple.com/kb/PH12348
    iTunes can print a playlist formatted for use as a jewel case insert; choose Command-P and select “CD jewel case insert.”
    Cheers,
    - Judy

  • It seems that a very large number of people are re-installing verson 3.6 due to the vast number of problems with the latest version, will this force an extension of the support cutoff date for version 3.6?

    Been running ver 3.6 ever since it came out and it's only crashed a few times. No other problems at all

    We had to do some serious gymnastics to remove at least most of the ability to use IPB. We removed it from the gui, but unfortunately, if they know the hotkey, they can still bring it up. Security has some serious headaches with this, as by law they have to be able to track where students go, and going with private browsing removes their ability to do forensic work they're required to be able to do. Not a very well thought out feature from Mozilla in my opinion, but it is what it is. Successive versions have made it even more difficult to remove even the gui portion.
    We do plan to release ESR due to the aforementioned security issues, but testing has been slow.
    But thanks for the reply. I think we can turn off the updates if it isn't already done.

  • I want the support doccuments for some of the BO versions.

    Could someone let me know the support document for Linux for following versions of BO.
    BOBJ EDGE 3.0
    BOBJ EDGE BI 3.0
    BOBJ EDGE STANDARD XI R2

    Hi Gautam
    Check the links  below
    www.service.sap.com/bosap-support
    http://service.sap.com/bosap-instguides.
    Thanks and Regards
    Anindya

  • Will the problems I am having with slow Safari response times continue if I port the image of my 4 to an new iphone 5?

    As in many families, I am ready to upgrade my iphone 4 to a 5 and pass on my 4 to my partner (who has my old 3), BUT I am resistant to do so because I have been having problems with Safari, (very slow response time) ever since I upgraded to the new OS a month or so back. I have completed all the cleaning tips (cookies, individual app shut downs) and hard boot steps with no change. I can sit my partners Iphone 3 next to my 4 and when using Safari it beats it hands down, almost doubling the time it takes on the 3. My 4 is quicker on all the other apps so I don't believe it is a hardware issue. My tests were done using our home wi fi set up the same on both phones after running all the cleaning tips on both. 
    I actually broke down and called the support line and the first level support told me if I upgraded to the 5 I would likely carry the problem to the new phone. She said she suspected malware or a virus and that for $300 she could forward me to second level support that could scan my phone and see what the problem is on my 4 and support any issues on a new iphone 5 OR for a one time lower fee $79, just help me fix my 4.
    Thinking through her options, I chose none of the above. Seems like I should be able to either 1) isolate the issue myself with the help of this forum or 2) upgrade to the iphone 5 and if the problem follows to the new one, get the support via the new device warranty. If the support person is correct and the problem is in the software and would follow the device, then in theroy I could wipe and restore my old 4 with the back up/data of my partners 3 and the problem on the 4 should be resolved.
    I really don't want to carry the problem to a new phone if I can fix the issue first. I have airwatch software to push my work email to my phone and that is usually a pain to do when I upgrade anyhow. I don't need to pay for a new phone that has the same problem as my old one. I will get grief from my partner for passing on an issue that will come up with the daily use of the old iphone 4 that I will be responsible to fix anyhow. I have invested too much time already to generate problems on both our phones. Thanks in advance for any tips or guideance about a streamlined way forward. 

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?
    FYI, there are no viruses that affect iOS unless the device has been hacked or jailbroken, in which case they cannot be discussed here.

  • Fuji X10 RAW support on the way?

    Are there any information regarding the support of the new Fujifilm X10 RAW files?
    Unfortunately the RAF files are not the same like the X100.
    There are already some rumors out there, that Apple is not going to support the X10...

    I must admit - I am getting more and more tired of being an apple slave.
    They published the latest camera update for aperture:
    Canon PowerShot S100
    Nikon 1 J1
    Nikon 1 V1
    Nikon COOLPIX P7100
    Olympus PEN E-PL1s
    Olympus PEN E-PL3
    Olympus PEN E-PM1
    Panasonic LUMIX DMC-FZ150
    Sony Alpha NEX-5N
    Sony Alpha SLT-A65
    Sony Alpha SLT-A77
    Still no RAW support for Fuji X10 - well done Apple!

  • Under what category is the CML download from the support portal?

    I am unable to locate the CML downloads from the cisco support portal.  What category is this located in?
    It seems like the marketing teams need to have a meeting and decide what kind of product this is.  Here in the support forums the product is listed under Network Infrastructure.  On the cisco.com site it is listed under Cloud and Systems Management.
    I have a valid license and support contract incoming, I just can't find the media download location.  Thanks for any help.

    I was able to work with TAC to get the edelivery email that included the OVA file.  How are you all going to handle product updates if there isn't any way to download the software from the normal support download tool?
    Another question I have now that I have the environment running is where do I download the client software?  I expected to see a download link somewhere on the User Workspace Management portal, but don't see anything.
    So far I have been a little disappointed with the lack of clarity in the documentation on simple things like this.  The documentation does a good job of instructing how to modify the .vmx file to get the nested hypervisor working (something that the end user shouldn't have to do, this should be handled in the OVA before it is delivered to the end user).
    I also feel that there needs to be a little more discussion on the deployment options for this software.  We are initially just wanting to run the simulations sandboxed with no connectivity to our corporate network except through the management interface for user connections.  I don't think we need the FLAT and SNAT networks for this, but if we do, I am confused because the documentation is poor.
    So now I have a server deployed, but no way to actually run simulations since I don't have any client software.

  • How can I label the peak in the waveform graph!

    Hello, my question is a little vague. I try to narrate it clearly.
    Thank you for your patience!
    I work with Labview 7.1. At a word, My question is how to label the
    peaks when using the while loop and the event structure with
    the dobule click event!
    1.Open the Why.VI and execute it.
    2.Click in the 'Acquire signal', then you will find two modes to upload
    the signals, press the 'Read' button and ignore the 'Sample',since 'Sample'
    mode need the support from the hardware, while 'Read' mode just upload file
    from disk,  select the 'Signal.txt'(inluded in the attachment), you will
    find two waveform shown in waveform graph,just like 'Pic1.jpg'. Up to now,
    there is no problem.
    3.Press on the 'Analysis' button and enter a new interface. Amplify the plot
    and selet the the a piece of waveform between about 3.02 and 3.06. Set the
    x coordinate of the 'Cursor 0' as 3.03 and set the width as 0.01. Move the cursor
    you will find two cursors(one vertical lines in yellow and another in blue).
    Double click the graph and select 'valley', two x coordinate values corresponding
    to the x coordinate of the two valleys are listed in the listbox. All above
    mentioned is shown in 'Pic2.jpg'.
    4.Let me explain my idea and my question now. What I have done is plot the waveform
    when clicking in 'Analysis' interface;then, amplify the waveform, select
    a certain area and move the cursors;at last, double click the graph, the waveform
    between the two cursors are selected and the peaks are identified.But, what I need
    next is to label the peaks in the graph as soon as I double click the graph,I
    can not realize this idea because the waveform is out of the while event, the coordinates
    of the peaks can not output until the while event is stopped. If I move the graph
    into the while loop,the selected area can not be keeped because the while loop will
    run continuously and will renovate the plot area to original area, but I want to keep
    the selected area for got the peaks conveniently. In short, My question is about how
    to label the peaks in the graph and keep the seleced area freely.
    This problem has puzzled me for a long time. May anyone give me some advice.
    Thank you for patience and really appreciate your help!
    BTWlease let me know if the VI can not run well!
    Attachments:
    Calculate velocity.vi ‏271 KB
    why.llb ‏389 KB
    Acquire.vi ‏213 KB

    Sorry, I try to compress the files in '.rar' ,but it is compatible with the web,I have to
    upload them in reply file.
    Attachments:
    signal.txt ‏684 KB
    Save file.vi ‏103 KB
    Get Waveform Time Array(0).vi ‏46 KB

  • Oracle 8i linux version

    Dear all
    I got a Oracle 8i EE license and was installed at a Sun system. However, I want to migrate such Oracle to Linux environment (The Oracle maintenance was expired). So, anyone has the Oracle 8i EE Linux version which can be downloaded for my new installation.
    Thanks
    Kwan
    22 Sept 2006

    You still should contact your Oracle sales representative.
    Oracle no longer officially provides copies of obsolete versions of software, such as database versions 8.1.x or 9.0.x ... the only way to get such copies is by the kindness of strangers who might have such copies. Those strangers include your sales rep.

  • My macbook 13 inch late 2007 model got soaked in wine I bought a pro to replace it , I want to use my hard drive on it as an external , I already purchased the case , now the motherboard I understand gets bad but not the hard drive , right?

    my macbook 13 inch late 2007 model got soaked in wine I bought a pro to replace it , I want to use my hard drive froom the old one on the macbook pro and use it as an external , I already purchased the case , now the motherboard I understand gets bad but not the hard drive , right? but everything else still is in there right. ? 
    I got my case from owc computing
    thye used a cloner last time I got the hard drive from them , but the apple had to be working. and now it's just not going to turn on wine is sticky forget about
    no worries I enjoyed it for 6 years could have gone longer I have all this extra gig ram memory, and a new digital drive for ith had broke
    all I want it my hard drive available at owc and make it a usb drive and acc3sss my stutt ? thansk any ideas and also on how I could sell or use the parts I can salvage,    and yay my new pro ix 17 inches silver sleek full ms office i life and i work. included 389 awesome price , no need for new this does awesome . rather than buying an optical drive for 200.00 I got a new computer to me and better for a lot less.          
    I am gratefful , just please help on the hard drive question as external ,
    thanks
    just didnt want to make this sound like a sob sitiuation and also inspire others what can be done.
    and I then will be able to upgrade to Snow Leopard and i life 2011.

    Well as I suspected I love OWC company I pulled out the mac hard drive , they offered me a Macdrive  free trial program to check your drive on PC Windows and yesSSSSSSSSSSSSSSSSSSSSSSSS it all there nothing lost
    woohooooo , thank you but nothing is dead, when you have faith , this was a prayer answered big time I wanted a pro so much and I get to use my 500  plust 250 plus 120 GB drives all of them
    ladies and gentlemen and I get to keep the 2 GB in from my macbook 13 inch and sell all the parts
    yipeee
    thanks for the support, now the case is Solved. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  • How can I burn a 60 min Hd video on a PC at best quality, I can't split the project in the timeline.

    How can I burn a 60 min Hd video on a PC at best quality, I can't split the project in the timeline?

    Harbi
    I replied long before post 7, but my reply did not get posted...instead it remained unsent. I have been having computer Internet connection problems. I was able to recapture it from restore feature of posting. Below is what I wrote.
    Thanks for the reply.
    Just in case note....for a regular DVD player, granted it is important to have a video format that the player supports (namely DVD-VIDEO format); however, the other half of the consideration...the player needs to support the disc type (media type) that the video format is on. I do not know of a regular DVD player that supports DVD-VIDEO on a memory stick.
    If you have recorded PAL 1080i (1920 x 1080 @ 25 interlaced frames per second), that interlaced video exists with Field Order: Upper Field First.
    But, you end product DVD-VIDEO is characterized by Field Order: Lower Field First. If you run into this type of Field Order problem, then there are 2
    possibilities to get that taken care of
    a. Assuming that you are using Premiere Elements 11, 12, or 13....set the project preset (manually) to
    PAL
    Hard Disk, Flash Memory Camcorders
    Full HD 1080i25
    or
    b. Import the source media using
    PAL
    AVCHD
    Full HD1080i15
    and then, for each Timeline 1080i, right click it, select Field Options from the pop up menu, and then select Reverse Field Dominance.
    When you export to file, you lose the opportunity for menus. The only export to file with menus is found in the webDVD export which is
    in reality a flash file with menus. That might be a consideration for playback through the web browser such as Internet Explorer or Firefox.
    If putting a file on a memory stick is a working possibility, you might want to look also at AVCHD.mp4 1920 x 1080p25, but all depends on the
    support of the player.
    Lots to think about. If you need clarification on any of the above, please do not hesitate to ask.
    ATR

Maybe you are looking for