Continue to get failed alignment, Print Quality page now not printing Green

Printer continues to print alignment page and posts "Failed Alignment".
followed diagnostic to clean print heads and print Quality Page.
I get not GREEN printing Do I need to replace the print heads? If so ... which one ?

Hey Eugene,
Thanks so much for your guidence and I'm sorry in the delay with following up with this issue. I've followed your instructions and still cannot get the pages to align properly – page 1 still stands alone after changing things in the document setup menu item, and when I go to print booklet, the formatting insists on adding blank pages, even though i have 56 total pages in the document (which is divisiable by four, and includes some blank pages i added to the document, namely page 2, and 56, so the front and back covers don't have text printed on the opposite side of the paper – this comment also responds to John's post, namely that i do already have the front and back of my cover in the document).
I suspect one problem may be that is that I started a new numbering section on page four of the document, so i could build a table of contents appropriately (have the pages start numbering "1" after the table of contents). But even if I put page numbering back to automatic it doesn't begin the document with "facing" pages.
To further illustrate my confusion, I'm enclosing some screencaps. The first is just a screenshot of the document formatting as you had suggested i switch it to. Here i'm illustrating how the pages aren't facing.
The second is a screenshot that shows the end of the first section of numbering.
The third screenshot shows the beginning of the new section of numbering, also explaining why I have numbered the pages this way (so page 1 can be an "About Us" entry in the table of contents.
Any advice or suggestions you have would be greatly appreciated,
Thanks,
Quin

Similar Messages

Since upgrading to ver 8 headers and footers on printing web pages do not print; typing response is terrible, type 20-30 char before seeing them; my PC or Firefox 8?

If I do an end task on plugin_container using Windows task manager, the typing response problem seems to go away temporarily. However, the plugin_container process soon restarts itself and the typing issue returns. It has happened four or five times while typing this note. Sometimes I start typing and the display of characters typed does not appear or while typing an displaying what is typed normally all of a sudden stops being displayed and eventually is displayed all in a blast of characters.
When I try to print a web page, the header and footer info that I have selected show in the print preview but disappears when I print the page and does not print on the hard copy.
I believe that both of the above situations began when I upgraded to Firefox version 8.
I tried to search for problems like the above with Firefox but could find nothing.
I tried all of the above in IE and IE works as it has in the past.
Is this a Firefox issue with version 8 or is there something wrong with my PC all of a sudden?

Response to cor-el suggestions:
I tried what you suggested as far as checking the theme (it's "Default 8.0") and deleting the sessionstore files (there was one .js file, one -1.js file and one .bak file). I still have the same slow response problems (especially typing, it has gone dead on me for a short time twice while typing this replay so far, now a third time) and lost of headers and trailers and some data.
I did the suggested actions three times just to make sure that I was doing them correctly. On the first try, the sessionstore.js and sessionstore-1.js was more than twice the size of sessionstore.bak. Since doing what was suggested, the sessionstore.js and sessionstore.bak are, I believe, the same size. I did not write down their size is why I am not certain.
The printing problem appears to only be with one website which is an investment website which I would prefer not to document here. I print from this website each weekday and I have confirmed that the printing problem started when the upgrade to version 8.0 occurred.
I need a solution to this or I am going to either go back to IE (Ugh!) or find another browser. The typing delays are an extreme annoyance since I do lots on the Internet including a lot of emailing. The delays also involve the buttons to select functions within a website.
Is there a way to get back to the version previous to version 8.0?

Printer Friendly Pages is NOT printing what I want

So I tried to use the 'addthis' and added it to the main content div. However, lists, bullets, etc. are not printing as expected. I am seeing "code" for example if I try to print on the main page (though on the main page there is not a lot of 'content').
I could add it to the individual content page layouts, but it is still not printing summary links, or other lists the way that I want.
I just want to print the content on the page. I am thinking jquery or writing a CSS for print. I really want to use the addthis and this is making me think I did something wrong. Any ideas on the best approach for printing "printer friendly pages"
on SharePoint 2010?

So I tried to use the 'addthis' and added it to the main content div. However, lists, bullets, etc. are not printing as expected. I am seeing "code" for example if I try to print on the main page (though on the main page there is not a lot of 'content').
I could add it to the individual content page layouts, but it is still not printing summary links, or other lists the way that I want.
I just want to print the content on the page. I am thinking jquery or writing a CSS for print. I really want to use the addthis and this is making me think I did something wrong. Any ideas on the best approach for printing "printer friendly pages"
on SharePoint 2010?

When installing HP 3054 wireless printer continue to get a message saying my mac is not connected to the network, but it is....What do i try?

When installing HP 3054 wireless printer continue to get a message saying my mac is not connected to the network, but it is....What do i try?

looks like this is your network connection settings problem, you'd better only keep one network adaptor online and linked, if you do not understand how to setup windows routing, this is completely not firefox problem. buddy. wish you goodluck.

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

This can be the result of selecting the wrong driver. An older, unsupported laser printer will sometimes work with the generic Postscript driver.

I just updated to iOS7 and Pages will not print using AirPrint!

Like the title says, Pages will not print. It's just a Pages issue. I can print using AirPrint when I print things from Safari or photos stored on my iPad. I've tried rebooting my router, "forgetting" my wifi connection and hooking it up again, I've exited Pages completely (so it's not running in the background) numerous times...nothing is working.
Strangely, Pages finds my printer just fine and goes through the motions of printing. It will tell me the usual "connecting to printer", "preparing printer", "now printing"...but nothing happens with the printer. It's like the connection between Pages and the printer gets lost somewhere. Pages used to print just fine before I updated to iOS 7. Whether that's just a coincidence or not, who knows. Has anyone else had this issue and found a solution?

I Also have the exact same issue, did you manage to resolve the issue?

When i try to copy books to my nook, with every single title i continue to get an error message that says 'copy not allowed - no permission to copy the book'. any suggestions on how to fix this?

when i try to copy books to my nook, with every single title i continue to get an error message that says 'copy not allowed - no permission to copy the book'. any suggestions on how to fix this?

I had recently updated from Windows 7 to Windows 8.1 and thus had to re download Adobe Digital Editions. I downloaded Version 4.0 but the problem seemed to be with the authorization between the e-reader and the computer. While in ADE click the help button and click erase authorization then re do your user id and password. It worked for me.

SCRIPT: second page is not print but need spool number

Hi Friends,
I'm creating a script. It has only one page. if the line item is exceeds in main window then it automatically print the next page.
now my requirement isgiven below
I need to print the first page and the second page should not print. But i need seperate spool request for 2nd page. whenever the user wants second page at that time he use the 2nd page spool number to take the print.
is there any solution or alternative method?
Thanks in Advance.
Vallamuthu.M

Hmmm if i knew your exact requirement i would be able to propose something better i guess, since this seems a little weird to be honest.
E.G. having a own output type for your page 2.
Anyway, returning to what you asked. You opened your form using FM OPEN_FORM. and when you are ready you use CLOSE_FORM to close it again.
You could make use of END_FORM followed by START_FORM when page 2 is to be printed.
This will give you page 1 and page in seperate spools.
you could as well close your form and open it again with ITCPO-TDNEWID = 'X' inmstead of using end_form and start_form.
But still i highly doubt that complete scenario.

6210 all-in-one -- prints fine on Win 7, but right side of horizontal page will not print.

HP 6210 all-in-one installed now on Windows 7 and prints fine. However, with landscape pages, will not print the right 1.5 inches of any NEW page I prepare, but pages prepared before on XP print fine. I've tried all adjustments and it just doesn't make sense to me whta is going on. HELP!!

I actually solved the problem myself by installing still another replacement set of print heads.
Mary

I CAN PRINT HP PAGES--- BUT NOT ON LINE PAGES

I CAN PRINT HP PAGES BUT NOT ON LINE PAGES
ERROR HAS OCCURRED IN SCRIPT ON THIS PAGE
ERROR UNSPECIFIED

Please read this post then provide some details. What printer model? What operating system? How is the printer connected?
What browser are you using? Are you using HP Smart Printing or some similar program?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HT4641 Im trying to print off my cv, page 1 prints off fine but page 2 does not, I'm using the selected template for curriculum vitae why does my page 2 not print?

Im trying to print off my cv, page 1 prints off fine but page 2 does not, I'm using the selected template for curriculum vitae why does my page 2 not print?

Hi @kots
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet M2727 Multifunction Printer series page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How one can print a page to pocket printer from handset of nokia 40 series/

how one can print a page to pocket printer from handset of nokia 40 series/60series/80 series
if u have any information regarding these two question the pls send me the link

I came across something similar recently where it printed the left hand side only!
If I want to print an email, instead of File > Print ( does not print properly ) I click on the print icon on my email webpage ( do not use applemail and access gmail direct) which then takes me to print preview showing the complete email which prints ok.
Some webpages ( File>Print) do not print properly and some do. Those that do not generally have their own printer icon (path) that needs to be clicked on.
Maybe something to do with encryption but don't know.
Hope this helps in some way.

MG5520 Printing is "Wavy" - Text not printed straight

Background:
I have a MG5520 printer, which I got towards the end of Spring semester of 2014 for school. I kept it stored over the summer in a climate controlled environment. I have a MacBook Pro and a 2004 Microsoft Word Document setup. My ink levels are adequate (1/4 full), and I do intend on changing them.
Current Problem: It is printing all text that goes horizontal in a sort of wavy formation. I'm not sure if this has to do with the ink levels, but I am positive that I have an adequate supply of ink.
Current Moves Executed to Resolve Issue: I have performed Maintenance of the machine by "Print[ing] the nozzle check pattern," "Cleaning," "Deep Cleaning," "Auto head alignment," "Print[ing] the head alignment value," "Roller cleaning," and "Bottom plate cleaning."
Result: Currently, all of those moves were in vain, and the problem persists.
What I need: Guidance and Assistance with how to resolve this issue.
Solved!
Go to Solution.

Hi FastTuhNap,
Based on your description of the issue, the Encoder Film inside the printer may be smeared. Please follow the procedures below to check the film condition, and clean it when necessary:
1. Press the power button to turn your PIXMA MG5520 off.
2. Unplug the power cord from the printer. Be sure to turn off the printer power and unplug the power cord first.
3. Open the Paper Output Cover.
4. Check if the Encoder Film inside the printer is clear. The Encoder Film is the transparent thin film. Please view this image:
5. If the Encoder Film is smeared as shown in the image, it needs to be cleaned.
6. Place a few drops of neutral detergent (2 to 3 drops of neutral detergent in 1/4 cup of tap water) on a cotton swab with water. CAUTION: Do not use any other detergents.
7. Moisten a cotton swab with the prepared cleaning water. Eliminate extra water so that no water drops.
8. Using the moistened cotton swab, wipe the Encoder Film. CAUTION: Be cautious so that no water drops inside the printer.
CAUTION: Do not contact the rail. If the rail is contacted, the print quality may be deteriorated. The Encoder Film is fixed to the printer with the springs at the ends. If the film is pushed too strong, it may be dislocated. Do not push the film. Just gently move the cotton swab over the surface of the film.
Also, please keep your hands off the printer and clean the film with the tip of the cotton swab. Change the cotton swab to new ones frequently.
9. Eliminate any stains or smearing from the film until the entire film becomes transparent and clear.
10. If the trail of detergent is left on the film, clean it using a cotton swab that is moistened with just water. If moisture is left on the film, eliminate it using a dry cotton swab, and wait until the film dries well.
11. Close the Paper Output Cover, and plug in the power cord of the printer.
12. Press the power button to turn your PIXMA MG5520 on.
13. Please print a test page.
14. If the problem persists, check and clean the Encoder Film again.
If the print quality is still not improved even after repeated cleaning of the Encoder Film, it is recommended that you contact live technical support . There is NO charge for this call. Real time feedback of a live technical support call would be very beneficial in this case.
Please dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays). A Canon technical support representative will be able to resolve this issue faster.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HT201465 I have installed software for a HP Deskjet 1510 printer but it will not print

I have OS X Yosemite 10.10.3 and I just purchased a HP Deskjet 1510 all-in-one printer. I have installed the software and my computer is picking up the printer but it will not print. I have restarted the computer and it still will not print.

Hello jamesettafromfl,
If you continue to have issues setting up your new printer in Yosemite, you may find the information and troubleshooting steps outlined in the following articles helpful:
OS X Yosemite: Add or remove a printer
OS X Yosemite: Printing troubleshooting
Sincerely,
- Brenden

I just installed a multifunction Lexmark Pro905 printer and it will not print from Firefox, but will from Explorer????

I just installed a multifunction Lexmark Pro905 printer and it will not print articles from Firefox, but will from Explorer??? Are there settings in Firefox to solve this??

When you initiate printing with {Ctrl + P}, are you able to select that printer in the Printer - Name box?
http://kb.mozillazine.org/Problems_printing_web_pages

Continue to get failed alignment, Print Quality page now not printing Green

Similar Messages

Maybe you are looking for