Continued auto-installs after updating firmware

I've recently updated the firmware on my N80 to the new V4.0632 version (Internet Edition).
Previously I had many apps installed to a memory card.
Since doing this, every time I boot up the system automatically attempts to reinstall some applications. Clearly it is trying to fixup apps that were previously on the memory card.
- Some apps just worked after restore
- other apps were broken -- they appeared installed but did not work, so I manually reinstalled & now they're working again
But there are also entries like (from memory) A123456 in the application manager list as "not installed". I assume it is these that are being attempted. Yet searching the memory card for .sis .sisx files (and even jar/jad) is fruitless. Additionally the app manager won't let you DELETE or even find out the file in question.
How do I fix/clean this up other than reformatting the memory card?
BTW I really like the new FW - the internet phone integration is super.

Yeah! I have another way out :try to remeber what were the applications y installed, den re-install em which happened a lot to my N91. Anyway, after upgraded to N80 IE.I think y have no important things on yr phone memory.Then Y format em both.

Similar Messages

  • Kernel panics after updating firmware

    Kernel panics began at startup after updating firmware about 2 weeks ago. Went through the KP repair routines prescribed by thexlab.com. Found no problems with the hard drive, permissions, etc. Did erase and install (with Leopard OS dvd bought from best buy) after archiving files to external HD and was able to startup normally. Updated OS to 10.5.7, along with several other items (iTunes was one of them). Put previously copied files (mostly iTunes). The computer ran successfully for a few days and then started getting KP's at startup again. Did another erase and install. Had success. Loaded iLife and Office 08 to have something to try to test the machine with. Shut down the computer and restarted successfully. I had forgotten I had not tested the RAM so downloaded Memtest. Tried to run it but the computer froze half way through the test. Did a hard shutdown, then tried to restart normally and got the KP again at startup. Here is the panic log:
    Sun Jul 5 18:24:05 2009
    panic(cpu 1 caller 0x001A7BED): Kernel trap at 0x00b10612, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x000000b8, CR3: 0x0134c000, CR4: 0x00000660
    EAX: 0x43ec9630, EBX: 0x049cf804, ECX: 0x04e15800, EDX: 0x00000000
    CR2: 0x000000b8, EBP: 0x43ec9668, ESI: 0x00000000, EDI: 0xffffffff
    EFL: 0x00010246, EIP: 0x00b10612, CS: 0x00000008, DS: 0x04e10010
    Error code: 0x00000000
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x43ec9408 : 0x12b0e1 (0x4555b4 0x43ec943c 0x133238 0x0)
    0x43ec9458 : 0x1a7bed (0x45e568 0xb10612 0xe 0x45dd24)
    0x43ec9538 : 0x19e517 (0x43ec9550 0x1 0x43ec9668 0xb10612)
    0x43ec9548 : 0xb10612 (0xe 0x48 0x10 0xb40010)
    0x43ec9668 : 0xb1753d (0xc1d00005 0x1000000 0x1000003 0x40)
    0x43ec96c8 : 0xb0bfc0 (0x43ec9858 0x43ec9808 0x0 0xafe41c)
    0x43ec9828 : 0xb00132 (0x0 0x600d600d 0x7027 0x43ec9858)
    0x43ec98e8 : 0xca58de (0xc1d00005 0x1000000 0x1000003 0x40)
    0x43ec9918 : 0xcae273 (0x2436f000 0x1000000 0x88100090 0x3e)
    0x43ecb8a8 : 0xc92d8a (0x2436f000 0x1000000 0x15 0x2436f01c)
    0x43ecb9a8 : 0xafa472 (0x2436f000 0x0 0x43ecbab2 0x80)
    0x43ecba08 : 0xaf15a5 (0x48af000 0x0 0x43ecbab2 0x80)
    0x43ecbb38 : 0xaf2d74 (0x48af000 0xaf6358 0x43ecbbec 0x4)
    0x43ecbc08 : 0xade139 (0x48af000 0x1 0x0 0x13)
    0x43ecbc68 : 0xad7940 (0x48af000 0x2407 0x43ecbd2c 0x48af000)
    0x43ecbc98 : 0x40c515 (0x48af000 0x4a40130 0x4a40130 0x0)
    Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.NVDAResman(5.1.6)@0xaf9000->0xd25fff
    dependency: com.apple.iokit.IONDRVSupport(1.5)@0xaeb000
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
    com.apple.iokit.IONDRVSupport(1.5)@0xaeb000->0xaf8fff
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
    com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000->0xaeafff
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    9A581
    Kernel version:
    Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
    System model name: MacBookPro3,1 (Mac-F42388C8)
    Was able to start up in safe mode and ran memtest again, this time having success and finding no RAM problems from the single run of Memtest. Shut down and restarted successfully.
    Turned the computer off for the night and just restarted it successfully about 24 hours later, and it is still running.
    I presently have about 130GB of free space on my HD. I don't have any peripherals attached. The computer gets fairly warm at times but certainly not excessively.
    Can anyone decipher my KP log and see if there is a fixable problem?
    thanks in advance,
    Pat Leopard

    Had another kernel panic at startup this morning. I had the Leopard DVD in and was contemplating another erase and install, but tried to back out of it. On restart the KP happened. Here is the log:
    Wed Jul 8 10:44:41 2009
    panic(cpu 0 caller 0x001A7BED): Kernel trap at 0x00b10612, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x000000b8, CR3: 0x0134c000, CR4: 0x00000660
    EAX: 0x2ebb1630, EBX: 0x04e20404, ECX: 0x04de7000, EDX: 0x00000000
    CR2: 0x000000b8, EBP: 0x2ebb1668, ESI: 0x00000000, EDI: 0xffffffff
    EFL: 0x00010246, EIP: 0x00b10612, CS: 0x00000008, DS: 0x04de0010
    Error code: 0x00000000
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x2ebb1408 : 0x12b0e1 (0x4555b4 0x2ebb143c 0x133238 0x0)
    0x2ebb1458 : 0x1a7bed (0x45e568 0xb10612 0xe 0x45dd24)
    0x2ebb1538 : 0x19e517 (0x2ebb1550 0x1 0x2ebb1668 0xb10612)
    0x2ebb1548 : 0xb10612 (0xe 0x48 0x10 0xb40010)
    0x2ebb1668 : 0xb1753d (0xc1d00001 0x1000000 0x1000003 0x40)
    0x2ebb16c8 : 0xb0bfc0 (0x2ebb1858 0x2ebb1808 0x0 0xafe41c)
    0x2ebb1828 : 0xb00132 (0x0 0x600d600d 0x7027 0x2ebb1858)
    0x2ebb18e8 : 0xca58de (0xc1d00001 0x1000000 0x1000003 0x40)
    0x2ebb1918 : 0xcae273 (0x2435f000 0x1000000 0x88100090 0x3e)
    0x2ebb38a8 : 0xc92d8a (0x2435f000 0x1000000 0x15 0x2435f01c)
    0x2ebb39a8 : 0xafa472 (0x2435f000 0x0 0x2ebb3ab2 0x80)
    0x2ebb3a08 : 0xaf15a5 (0x4837800 0x0 0x2ebb3ab2 0x80)
    0x2ebb3b38 : 0xaf2d74 (0x4837800 0xaf6358 0x2ebb3bec 0x4)
    0x2ebb3c08 : 0xade139 (0x4837800 0x1 0x0 0x13)
    0x2ebb3c68 : 0xad7940 (0x4837800 0x2407 0x2ebb3d2c 0x4837800)
    0x2ebb3c98 : 0x40c515 (0x4837800 0x4a0bc40 0x4a0bc40 0x0)
    Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.NVDAResman(5.1.6)@0xaf9000->0xd25fff
    dependency: com.apple.iokit.IONDRVSupport(1.5)@0xaeb000
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
    com.apple.iokit.IONDRVSupport(1.5)@0xaeb000->0xaf8fff
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
    com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000->0xaeafff
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    9A581
    Kernel version:
    Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
    System model name: MacBookPro3,1 (Mac-F42388C8)
    I left the computer alone for a while and when I hit the power button it came right up.
    I'm going to pull RAM modules per your suggestion.
    thanks,
    Pat Leopard

  • Compass application can't running well after update firmware to 20120726

    my windpad7 can't run compass application well after update firmware to Android_2.3.1_MSI_02_20120726 but it can pointing well if i turn it upside down (face down). i use the same application that running well on earlier firmware and I've try using another typical application and the result is the same,.. anyone experienced it? 

    on my n73 i can go to app manager and reinstall them.
    if u wanna remove it, then reinstall them and uninstall.
    Blackberry Bold

  • Sony A7 failed to turn on after updating firmware 2.00

    As i mentioned, my Sony A7 failed to turn on after updating firmware 2.00. It just appear a blank screen after click the finished button on the updating app on Mac. I waited for more than an hour and there is still no thing happened.

    I bought the Sony A7II a few days ago.  It initially charged just fine, but today I tried to charge it using the cable with an electrical outlet as well as the USB to computer.  Neither one would get the charge light to illuminate.  Not feeling the love Sony.  I just purchased a Flash, wrist belt, filters, etc...  I'm definitely not happy.  It seems this is a problem!

  • Some buttons without tones after updating firmware...

    Hi.
    After updated firmware to version 20.0.080 (5530 Xpress Music), some tones and vibrates at dialing pad (just numbers) and at Contacts (main screen) don't work any more.
    All other functions work normaly just as described, but some tones and vibrating functions doest'n seem to react. I have set touch screen tones on level 2, also the vibrate on level 2. Tryed to reinstal the latest firmware again, done succesfuly, but no changes.
    Should I try to restore the phone by *#7370# ??? 
    Is anybody facing the same issue ???
    br,

    Hey,
    I have the same problem with my phone. After the update, installing v.20.0.080 the dial tone from the keypad just dissapeared. These morons at Nokia instead of adding letters to the keypad dialer with the new firmware, they went further and removed the dial tone.  Such a progressive step..

  • Apple TV doesn´t work at all after updating firmware!

    After updating firmware Apple TV 3 the only thing that works is the little lamp on the front...it´s steadily blinks. It doesn´t response to remote control, and don´t show up threaded via USB in Itunes for resetting.
    Model: Apple TV 3
    Itunes: 12.0.1.26
    What to do?

    The update didn't apply correctly. You need to restore via iTunes.
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    Make sure you follow the steps correctly (unplug all cables, connect micro usb, then reconnect power)
    Connect directly to a computer, not a keyboard port or USB hub. Try a different cable

  • After Updateing Firmware defult password is What?

    Sir
    i have router RV215W and i was update my router firmware to 1.1.0.5 . After finishing updation my router was restart than after i found wifi name is "ciscosb1" but old password is not work . So please tell me the defulted password after updateing firmware .

    Hi Udayaraj,
    Even if you do a firmware upgrade the password wont get changed until and unless if you do a device factory reset.
    once try cisco/cisco or admin/admin.
    Thanks,
    Phanikrishna

  • Always auto reboot after update 4.3

    im Z1 user from china, after update 4.3, auto reboot once a day,and yesterday i restore factory settings,but auto reboot also....>_<,help me please!

    As per the above advice, please see a step by step guide below:
    1. Download the PC Companion software from http://www.sonymobile.com/gb/tools/pc-companion/
    and install it on your PC.
    2. Install and open PC Companion then select Support Zone.
    3. Phone Software Update.
    4. Start.
    5. Repair Phone
    6. Continue
    7. Accept data removal
    8. Next
    9. Wait for prepare
    10. Select Phone
    11. Follow the connection steps
    Don't forget to mark posts that answers the topic as Accepted Solution. 
    If you find any post helpful, press Kudos.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Problem after update firmware 1.2.1

    After updated the firmware to 1.2.1, when playing MP3 format songs, the music goes strange and quality turn out very bad. However, when it playing M4A format songs, it runs perfect. Any idea or suggest? Please do not tell me to convert the MP3 file format to M4A.
    Thank you very much.

    Thanks for clarifying, hopefully someone from BlackBerry will pick this up and it will be fixed in a future release.
    If you've been helped click on , if you've been saved buy the app.
    Developer of stokLocker, Sympatico and Super Sentences.

  • How can I configure Snow ABS after updating firmware to 5.7?

    I have a 3 Mac network (G5 w/Tiger,vers A iMac and Wallstreet PB w/ Panther) connected by Snow ABS extreme that's been running perfectly for a couple of years. I updated the firmware on the ABS to 5.7 in efforts to have a configuration my Treo 650 with Enfora WiFi adaptor could join (it's 802.11b only and Enfora suggested updating the firmware and selecting b/g option). After the firmware update, Airport Admin Utility doesn't see the ABS unless I connect it to the G5 running AAU by ethernet (don't know if it's a crossover but I read on the forum it now doesn't matter). Trouble is when I then give my password, try to configure I get "The Airport Admin Utility was unable to read the configuration on the selected base station...an error occured while reading the configuation". I've tried updating the FW again, soft and hard resets, made sure I have the latest AirPort (4.2.1)and nothing helps. I pulled out my original snow ABS (not extreme) and my DSL and whole network function like before. I like the extreme since I can use my Airport Express to print for everybody and it then completes my coverage much better. Any help would be greatly appreciated.
    LittleJohn
    G5   Mac OS X (10.4.6)   iMac vers A, Wallstreet PB (both 10,3,9)

    There is no reason to be running beta software, I doubt it will even still run as iOS 6 has been officially released.  Or were you simply trying to be funny? 
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • After update firmware cannot to search contact use chinese word

    Hi all, My Q10 just update to firmware 10.2.1.537, after update I search the contact use chinese word,  always show “no result”, has anyone have the same issues? Can I back to previous version of firmware? Many thanks to all.
    Software version: 10.2.1.537
    OS version: 10.2.1.1925
    Trad. Chinese version ( Hong Kong)

    Oh, my apologies then, I don't understand your issue.
    Perhaps someone else will have some assistance.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • C7 restarting after update firmware 013.016

    Yesterday I seen that new firmware is out and I start updating from my operator network,everything was OK finish update and then start the problems with my C7.My phone restarted a couple of times from yesterday,last time I was in middle of call when C7 shutdown and start again alone.what happen I suppose that new firmware is for solving bugs not to make them My phone work "OK" until I update firmware,there was some bugs with widgets but nothing serious like this.Its very unprofessional when your phone is resetting in middle of some important conversation.Any solution Nokia?Has someone else have same problem?
    sorry if there are some mistakes in english its not my language but I think that you understand problem

    I don't have nokia care center in my town ,I must send phone over the mail express,because of that, I first called them but only what they can told me is to send phone and they will update software.
    So they think, that's the software problem,I didn't send phone yet,  I wanted to try to reinstall software over PC suite, but that was problem too. PC suite doesn't recognize operators version of software.from nokia ovi suite the latest software is 012.004 ( my previous ) and don't let me to reinstall because I have newer on the phone.
    "Slint" I see that you have same problem ,I noticed one more thing my battery drain to fast (much faster then with previous firmware) also after upgrading software, do you have same experience maybe?
    I am working now 16 hours without restarting if you think that's the temperature problem I will warm up a little this machine now , to see what happen
    I didn't expect these problems ,I am very disappointed, its big many for phone and you expect everything fine.
    The phone is great I loved him but these bugs kill my love for him.
    I have also N86 and he works perfectly ,I wanted a touch screen and now I have a problem.
    I don't understand how can be software problem if update pass well.and if there is differences between update from operator or by PC , why nokia gave option to update by operator?
    I think that the problem is stupid firmware , phone work well until the update of firmware.conlusion by me is that I hope for new firmware soon to resolve these problems.i also make complain to my operator, will see what to do next .

  • A3000 receiving call after update firmware

    this is what happened to me after i update to firmware A3000_A422_003_014_130909_WW_CALL_FUSE
    any solutions?
    i want to update to firmware A3000_A422_008_019_131107_WW_CALL_FUSE but i'm afraid that i cant make a call with my device.

    How we can update firmware step by step, can you explain please?

  • E61i after update firmware to 3.0633.69.00, cannot...

    Hi
        I cannot use wellness diary after update e61i firmware to 3.0633.69.00. I tried to re-install wellness diary with latest version, error occur!. How can I do? I need to use wellness diary. Please help.

    check your product code hare for the latest available firmware:
    http://europe.nokia.com/A4577224
    if there was a number larger your current product code you can upgrade your phone via NSU.
    if no, you should wait longer time(if your phone not to be branded)
    check the below box,if i was helpful for you.
    NOKIA means:Night Of King In Alone

  • N97 CRASHING AFTER UPDATING FIRMWARE TO 21.0.045!!

    Help! 2 days ago my phone told me there was a new software update, so i installed SW Updater on my PC, aswell as PC Suite to back everything up before upgrading. I did the upgrade, all fine. Now the phone has crashed 4 times in the last 2 days! 3 times when i took it out of my pocket screen was blank, but the green and red call/hang up buttons were lit. Unable to use power button to turn off or on. Had to remove battery! Now it just crashed after sending a text, screen was lit and showing my inbox, but touchscreen, and all buttons (including power button) unresponsive, again had to remove battery!
    I cant rely on a phone in this state, it may be in my pocket for hours, in a crashed state without me even knowing i am unreachable!
    is there a way to revert the firmware, or is it worth reinstalling this firmware (is it even possible - how do you do that?), or is there a newer one available which fixes the bugs in 21.0.045??
    Please help!
    thanks

    You could try to reinstall your firmware through Nokia software updater. After the firmware reinstalling, reset the phone.
    Soft reset. Type  *#7370#  and the phone's lock code (Nokia's default lock code is 12345). Warning!Soft reset deletes all your phone's data!
    Note; don't make any backup of your settings!
    If you want to thank someone, just click on the blue star at the bottom of their post

Maybe you are looking for