Continued Problem (several weeks)with iArtwork not showing up
I just don't get it, my artwork is still not showing up. The generic image is appearing for my podcast. My images do appear when the podcast plays, but the generic image is still appearing on my podcast page. I know the feed is correct. itunes continues to update when I send new images but my main artwork is still the itune generic- any suggestions. I've had my feed validated several times.
getfitpod
Dell Windows 2000
See the forum announcement regarding problems with the iTunes podcast image.
It's broke and Apple is working on fixing it.
Look through some of the other threads regarding this problem for some helpful tips to ensure that your artwork will show up whenever Apple finally fixes it.
Erik
Similar Messages
-
Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue. I am also unable to send SMS and text messages without them either failing or not sending at all. Is there an outage in the Cleveland, Ohio area (zip codes 44129, 44134, 44137) or anything else I can do to resolve this issue?
Not that I'm a Verizon employee, but I have experience in the field. An LTE tower will only extend up to, on a perfect day, with no elevation, 6-7 miles. On a typical day, you will be lucky at four (4) miles. The three ZIP codes you've given are all within about a 12 mile radius. That would mean that 2-3 towers are currently down at the same time, and Verizon would know about it within the hour. Being it's Cleveland, I'm sure they would receive numerous calls regarding an outage of that size.
My point is that if you're having issues in all three ZIP codes, chances are it's a phone issue. If you're handset is simply not receiving LTE, but still receiving 3G, that would signify a SIM card issue. You need to get your SIM card replaced. -
Anyone having trouble with Netflix not showing up on the Internet Menu? I have tried to do a reset and then restore, but it says that "the latest update download cannot be done at this time, try again later"
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
the problem I have since I upgraded to Mavericks version 10.9.1
The problem appears only with Mail not with other programs, not even with my browser.
When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command + to enlarge the text, although I can reduce it with Command -.
As I have a problem with my eyes, This is a serious matter for me.
When I write an e-mail, if I select text and press Command +, it just displaces the text to the right.
Now, my husband has a USB keyboard. If he connects it to my computer, his regular Command + does not work either, but he uses the extended keyboard, then it works. Unfortunately, he needs it for a musical application which does not work with a wireless keyboard.Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10". -
Problem with Mail not showing new messages
Since 2 weeks, my Mail does not show any of my 'hotmail' messages receive. The connection diagnosis said there are no problem with the account and server. It seems to download incoming mail (which also show in hotmail) but Mail does not show any new messages.
Back up all data.
Select the problem mailbox in the mailbox list, then select
Mailbox ▹ Rebuild
from the menu bar. -
Mavericks 10.9.1-Problem with finder not showing peripheral hardware
After upgrading to Mavericks (10.9.1) my Finder doesn't show new hardware in Devices. For example, Finder not showing iPod when i plug into the keyboard's usb. i have other examples of the same problem, such as trying to find a hard drive detached from an old computer. anyone know if i can configure Finder to show all peripheral (hardware) devices? maybe i need to plug the peripherals into back of the iMac rather thatn into my keyboard usb (which i have not tried.) Thanks in advance.
CharlieI had a similar issue as you did -- for a few weeks now I've been suffering through agonizingly slow Contacts performance.
The way I resolved it was:
1) Quit Contacts
2) Go to system preferences and go into iCloud, then uncheck contacts -- choosing to delete from mac.
3) Go into system preferences and to Internet Accounts and again uncheck contacts under any of the accounts it's enabled on (gmail, yahoo, etc).
4) Go to your user's library folder (easiest way is to open a finder window, hold down the option key on the keyboard and from the Go menu, select Library).
5) Delete anything referring to Address book or com.apple.address book.... -- check these folders in particular:
- Address Book
- Application Support
- Caches
- Preferences
6) Restart your computer
7) Go back into System preferences and enable contacts from wherever you want (iCloud, etc.)
8) If it's not quite enabling (appears to enable, but checkbox doesn't show), then do one more restart of the computer.
9) Now open Contacts and allow it to sync -
Problems with page not showing up in Internet Explorer
I uploaded my page. All was fine. Looked good in all
browsers.
home.gci.net/~larry-and-jackie/index.htm
Now all of a sudden my index.htm page (also have default.htm
page) shows up as a black screen only no pictures. No words.
All of the sub pages show up fine if you add that to the
address. Just the Index. is not showing up in Internet Explorer.
Looks good in Firefox, Netscape and Safari.
example home.gci.net/~larry-and-jackie/index3.htm
Anybody have any suggestions?
J WhedbeeI'm seeing the entry page at:
http://home.gci.net/~larry-and-jackie/
with no problems.
I'm also seeing
http://home.gci.net/~larry-and-jackie/index.htm
with no
problems... pics, black background.
http://home.gci.net/~larry-and-jackie/default.htm
is just the same as
index.htm
http://home.gci.net/~larry-and-jackie/Index.htm
(note the capital "I" )
can't be seen .... no such file.
Not sure why you would have an index.htm and a default.htm
both really
aren't needed.
Have you tried clearing your browser cache?
Nadia
Adobe® Community Expert : Dreamweaver
Tutorials |SEO |Templates
http://www.DreamweaverResources.com
http://www.perrelink.com.au
CSS Tutorials for Dreamweaver
http://www.adobe.com/devnet/dreamweaver/css.html
"J L Whedbee" <[email protected]> wrote in
message
news:enccnu$n4t$[email protected]..
>I uploaded my page. All was fine. Looked good in all
browsers.
>
> home.gci.net/~larry-and-jackie/index.htm
>
> Now all of a sudden my index.htm page (also have
default.htm page) shows
> up as
> a black screen only no pictures. No words.
>
> All of the sub pages show up fine if you add that to the
address. Just the
> Index. is not showing up in Internet Explorer.
> Looks good in Firefox, Netscape and Safari.
>
> example home.gci.net/~larry-and-jackie/index3.htm
>
> Anybody have any suggestions?
>
> J Whedbee
>
>
> -
Problem with pictures not showing up
I just updated my iphone 3g to the 4.0.1 and i went into my pictures n half of them show up black in the album. but u can still click on them and seee them full screen. Is there anyway to fix the problem with the pictures showing up as black in the album?
If this is for the photo albums that were transferred from your computer, under the Photos tab for your iPhone sync preferences with iTunes, deselect Sync Photos followed by syncing which will remove all photos on your iPhone that were transferred from your computer. Follow this by reselecting Sync Photos and selecting the photos you want transferred to your iPhone followed by a sync.
If no change after this, the next step is deleting what is called the iPod Photo Cache from your computer followed by another sync. -
PE12 just installed, but Organizer share preference for emailing photos does not show any email preferences except the default Adobe. Have Visa with Windows Mail. Previous PE worked OK. How to resolve?
Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements -
Problem with icons not showing up using stacks.
In my dock, I have a folder that contains movies and when I click it, it opens using the 'fan' effect in Stacks.
The movies are .avi. My only problem is certain icons do not appear. They remain a simple QuickTime Logo on a white looking film strip.
Below is a picture describing what it looks like.
http://img523.imageshack.us/img523/7027/picture1nhx.png
As far as I know as of yesterday, they were all displaying their respectable icons. Now they are not.
Can anyone offer me some advice on how to get them to display their proper images again?
Thanks in advance.
Dran.Sounds like a hosed LaunchServices database. Launch the Terminal app in /Applications/Utilities/, copy this one-line command into the window that pops up, hit the return key, quit the Terminal app, and restart:
*/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user* -
GX660 SSD Caching problem - the accelerate tab does not show
Ok so im trying to install a crucial m4 64 gb (FW 0009) into my gx660 and enable it as a ssd cache via the intel RST program. So far with no luck.I've ran into a wall and my problem is that the accelerate tab in intel rst is not showing.
Here is what i did. Hopefully in the right order.
1. I installed and updated the intel RST drivers and software.
2. I installed the ssd in the empty drive slot in the case.
2. I flashed my BIOS to the gx660r one to enable the RAID option.(before this i also found out that 1 of my 2 ramsticks where bad and i took it out)
3. I enabled RAID only to discover windows would BSOD on boot and i disabled it again (sat it back to AHCI)
4. I used these registry hacks to get RAID mode to work.
Enable switching between all IDE/AHCI/RAID modes by changing "Start" Values in these keys to 0
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci\Start
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Pciide\Start
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStorV\Start
5. I re-enabled RAID mode and booted into windows perfectly
6. Then intel RST bugged on me and i reinstalled it several times. (it showed my disk as having 0 gb's of space and was only able to show their serial number)
7. I got intel RST working but it still wont show the Acellerate tab :(
At this point i got stuck when the accelerate tab still wasnt showing and now i tried making a clean install of windows (in RAID mode) on a newly created partition. Here i have the same problem.
I have also tried switching the drives places in the case but still no luck.
I have gotten to the point where im about to give up on this. Do any of you have any idea of what i've done wrong? if so please reply.... Note to self: Do proper research. Turns out youre probably right. According to http://www.tomshardware.com/reviews/intel-z68-express-smart-response-technology-ssd-caching,2938-3.html it is also possible on HM67 and QM67 chipsets but thats not what i have. Thought that SSD caching support was a nobrainer on laptops but turns out its not.
-
Issues with purchases not showing up in Purchased Playlist.
Over the past week or so i have have noticed that my purchases are not showing up in my Purchased playlist on my iOS devices. They are syncing across devices but only being put under "Songs." I know i can manually add them to my Purchased playlist but that is such a pain. Anyone else having this issue?
I am currently working on restoring my iPhone 5S to see if this helps but again this is a huge pain.Do you have automatic downloads turned on? I think it's under iTunes menu >> preferences >> store. Maybe turn on showing purchases in the cloud showing too.
Could also click iTunes Store >> purchases (under quick links) >> music. Does the missing music show there with cloud and down arrow? -
Email sent with attachments not showing in sent folder
I have recently found that emails I send with an attachment do not show up in my sent folder. They are arriving at recipient but I do not then have a record of the email sent. This is really very annoying and I can see a few other poplin online forums are having the same problem. However nobody seems to have come up with a solution. It appears I have to cc myself in to the mail and then move it to my sent folder when it arrives. I can't keep doing this. Other emails without attachments are showing in the sent box. Does anyone have any idea what I can do to fix this please.
Didn't work for me... (rebuilding the mailbox)
I cleaned the Sent mailbox and rebuilt the culprit mailbox and the general "Sent" mailbox.... sent a message.. it 'hung' in the Outgoing Message box for @ 20 seconds and it sounded as if it were sent and when checking the Sent mailbox for that account, it did not show.... I tested this again with another message addressed to myself and it sent as expected and showed in the Sent mailbox for the account... Did another test to a different recipient and the message sent as expected and showed in the Sent mailbox... The only corrollary that exists at this stage, is the recipient of the "disappearing" messages is that I email this particular recipient very regularly and at times with long threads... However, these last messages were completely different subjects and previous replies to this persons email sent as expected.... so this is a random occurrence.
--prd54usa -
Help with Datatip Not showing on 2 different charts at the same time
What's up guys? I am building a massive application and came across an issue. I was able to create a smaller flex application that recreate the problem. Basically its about the datatip. Let's say you have a Main application with tab navigation that calls 2 different modules: Module A, and Module B. Module A has a piechart with datatip enabled. Module B has a linechart with datatip also enabled. For some reason the piechart datatip are showing while the linechart datatip are not showing on mouse over (only on click). Any idea what's going on or how to fix it so that both charts show their datatip on mouse over? -Thank you
Here are the codes below:
MAIN APPLICATION:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" paddingTop="20">
<mx:VBox paddingTop="50" width="80%" height="100%" paddingLeft="50">
<mx:TabNavigator width="80%" height="100%" >
<mx:VBox label="Module A" >
<mx:ModuleLoader url="tester2.swf" width="100%" height="100%"/>
</mx:VBox>
<mx:VBox label="Module B" mouseChildren="true" >
<mx:ModuleLoader url="tester.swf" width="100%" height="100%" />
</mx:VBox>
</mx:TabNavigator>
</mx:VBox>
</mx:Application>
Module A:
<?xml version="1.0" encoding="utf-8"?>
<mx:Module xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" xmlns:local="assets.*" initialize="_onInitialize( event )">
<mx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.events.FlexEvent;
import mx.collections.ArrayCollection;
[Bindable] private var _chartDP:ArrayCollection;
private function mouser(event:MouseEvent):void
Alert.show("RPG");
private function _onInitialize( event:FlexEvent ):void
// set up our chart data
_chartDP = new ArrayCollection();
_chartDP.addItem( { quarter:1, shooter:1000, racing:400, rpg:550 } );
_chartDP.addItem( { quarter:2, shooter:875, racing:230, rpg:600 } );
_chartDP.addItem( { quarter:3, shooter:920, racing:310, rpg:512 } );
_chartDP.addItem( { quarter:4, shooter:750, racing:130, rpg:489 } );
]]>
</mx:Script>
<!-- defining the chart -->
<mx:LineChart id="gameSales_chrt"
dataProvider="{ _chartDP }" showDataTips="true" y="45" x="83" >
<!-- Setting our Axis/Axes -->
<mx:horizontalAxis>
<mx:CategoryAxis categoryField="quarter" title="Sales Quarter" />
</mx:horizontalAxis>
<!-- Set up our data series -->
<mx:series >
<mx:LineSeries yField="shooter" displayName="First Person Shooter" form="segment" />
<mx:LineSeries yField="racing" displayName="Racing Simulation" form="segment" />
<mx:LineSeries yField="rpg" displayName="Role Playing Game" form="segment" />
</mx:series>
</mx:LineChart>
<!-- Set up the legend for the chart -->
<mx:Legend dataProvider="{ gameSales_chrt }" direction="horizontal" x="121" y="10"/>
</mx:Module>
Module B:
<?xml version="1.0" encoding="utf-8"?>
<mx:Module xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" initialize="_onInitialize( event )">
<mx:Script>
<![CDATA[
import mx.events.FlexEvent;
import mx.collections.ArrayCollection;
[Bindable] private var _chartDP:ArrayCollection;
private function _onInitialize( event:FlexEvent ):void
// set up our chart data
_chartDP = new ArrayCollection();
_chartDP.addItem( { genre:"Shooter", quarter1:1000, quarter2:932, quarter3:845, quarter4:663 } );
_chartDP.addItem( { genre:"Racing", quarter1:565, quarter2:875, quarter3:732, quarter4:432 } );
_chartDP.addItem( { genre:"RPG", quarter1:432, quarter2:743, quarter3:531, quarter4:289 } );
]]>
</mx:Script>
<!-- defining the chart -->
<mx:PieChart id="gameSales_chrt"
dataProvider="{ _chartDP }"
showDataTips="true" y="60" x="10">
<!-- Set up our data series -->
<mx:series>
<mx:PieSeries
nameField="genre"
field="quarter2"
labelPosition="insideWithCallout" />
</mx:series>
</mx:PieChart>
<!-- Set up the legend for the chart -->
<mx:Legend dataProvider="{ gameSales_chrt }" direction="horizontal" y="10" x="24"/>
</mx:Module>Well upon using the debug function and having a stop at the show datatip static function, i came across this error
TypeError: Error #1034: Type Coercion failed: cannot convert mx.managers::DragManagerImpl@195b9b21 to mx.managers.IDragManager.
at mx.managers::DragManager$/get impl()[C:\autobuild\3.2.0\frameworks\projects\framework\src\mx\managers\DragManager.as:15 2]
at mx.managers::DragManager$/get isDragging()[C:\autobuild\3.2.0\frameworks\projects\framework\src\mx\managers\DragManager .as:187]
at mx.charts.chartClasses::ChartBase/processRollEvents()[C:\work\flex\dmv_automation\project s\datavisualisation\src\mx\charts\chartClasses\ChartBase.as:2310]
at mx.charts.chartClasses::ChartBase/mouseMoveHandler()[C:\work\flex\dmv_automation\projects \datavisualisation\src\mx\charts\chartClasses\ChartBase.as:4308] -
Groups created with dscl not showing in WGM?
When creating a group "testGroup1" via dscl as follows ...
Dscl -udiradmin /LDAPv3/mac-mini.local -create /Groups/testGroup1
The group shows up when running ...
Dscl -udiradmin /LDAPv3/mac-mini.local -list /Groups
However, in Workgroup Manager the new created group"testGroup1" does not exist.
Is there a way to determine where exactly the newly created Group is located?
I did notice that the Workgroup Manager directory location is /LDAPv3/127.0.0.1.
Does the 127.0.0.1 have something to do with it?
Also, if I try to run the following ...
Dscl -udiradmin /LDAPv3/127.0.0.1 -list /Groups
I get an error saying "Data source(/LDAPv3/127.0.0.1) is not valid.
I know it's there because it shows when I run a different tool called Ldapmanager.
But for some reason it's not showing in Workgroup Manager.
I was wondering if there is some attribute (or something like that) that must be set when creating the group before it will show in Workgroup Manager.
Or maybe the server needs to be rebooted before they show? I wouldn't think that would be necessary, unless the users are being loaded when Workgroup Manager loads.
Any help would be greatly appreciated.
Thanks,
ZeekHi David
There is a configuration that needs to setup to turn on outbound delivery document number update in MD04.
This means if there is an STO in MD04 which is converted into outbound delivery, MD04 should now show outbound delivery number instead of an STO
Follow this path and set up the document type of your outbound delivery in it
Logistics execution -> Shipping -> Basic SHipping Functions -> Availability Check and transfer of requirements -> transfer of requirements -> Determination of Requirement Types using transaction
Maybe you are looking for
-
IPad no longer showing open with option in pages in order to upload files to Dropbox. Any ideas..?
Can no longer find open in option on iPad usually at top right so that document can be viewed in drop box. Have updated pages drop box and iPad to ios7
-
RE:photos imported from iPhoto show up as white blank images in iMovie6.0.3
This is the first time this has happen to me. I did a project last summer and had no problems importing photos from iPhoto. When I used a theme and put my photos in the theme, I can see the preview all right, but when I apply the theme or effect, whe
-
Context Cartridge for Oracle 8.0.6 for Solaris
6/21/00 I need some help with tuning Context Text queries a SQL query. My query is of the format: SELECT /*+ ORDERED USE_NL(T1) */ distinct T1.column4,sum(SCORE(10)) FROM Table1 T1, Table2 T2 WHERE T1.column_with_bit_map_index = 1 AND -- column is ei
-
Retrieving row numbers in order
how are rows retrieved in jdbc? i want my query to retrieve the row numbers and not the record number. if i do this ResultSet rs = stmt.executeQuery("SELECT LMNAME FROM T_LINKMANAGER where rownum >= 1 and rownum <=18 and LMFLAG='false' order by
-
I cant restore my iphone and stay in the itunes mode for ever
the i tunes mode stay freeze and on my computer keep saying the itunnes found my phone in restore mode and start the precess but in aprox each 20 minutes say the same thing and start over. what do i do?