Continuing K9A2 Platinum & Vista Install Problems - new variance

Hi All,
This is a contiunuation of my earlier post. https://forum-en.msi.com/index.php?topic=113866.0
My full system specs are:
MSI K9A2 Platinum MB
OCZ Technology 2x2GB 240DIMM PC2-6400 Gold
AMD Phenom 9500
2 x Samsung SATA DVD Writer SH-203B/BEBN
GeForce 8800GTX 768MB PCIE DVI
Coolermaster Cosmos case
Seagate 320GB SATA2 HDD ST3320620AS
OCZ 1010 GameXstream PSU
Following the problems described in my earlier post (see above) - which I thought were HDD related - I have tonight bought the Seagate HDD listed above. Installed the HDD, attempted to install Vista Home Premium 64.
Installation seemed to go fine, towards the end - when you get the 'Windows will now start for the first time" screen - the system blue-screened (too quick to get the message, looked like a RAM issue) and crashed. Re-started and then the installation aborted itself.
Second installation try: The system went through the installation process, I passed the bit where you choose the partition to install (did a format), installation seemed to go fine, one re-start, system gets stuck in the 'Completing Installation' phase, I would say roughly around 70% installed according to the blue progress bar.
Interstingly, when I now attempt to perform a new installation attempt I do not even get to the screen where you choose the language and country settings, I just get stuck at the black screen with the Microsoft name written and the green, interrupted bar sliding from left to right.
Am I back at the same stage where I was in my previous post https://forum-en.msi.com/index.php?topic=113866.0
This is crazy. I have built around five or six systems so far and never had problems like these...
Please help.
C.

@Russ_xp: No, not yet. I have been scouring the OCZ site to get an idea on compatibility and settings but have been disheartened when the advice for the K9A2 and my memory modules said: "Please call"
Sent an email to European support of OCZ and am awaiting their reply...
I had a look at the memory timings in the MB's BIOS, though and have to admit that I was baffled by the number of different settings that I could manipulate. On the MB's that I played with before there were less fields to manipulate so entering 5-5-5-15-2T was easier (don't laugh).
Cheers,
C.

Similar Messages

MOVED: K9A Platinum Vista install problem - BIOS not ACPI compatible

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=109600.0

I have been having very similar issues with this board ever since they updated the MSI drivers in April. MSI says it cant be a driver/MoBo issue cause everyone would be calling in about it.
I think they are completely wrong and have a driver package that isn't working correctly...but thats just my opinion.
Anyway, have you tried installing in RAID 1?
This did not change the final outcome for me and I am stuck to Native IDE till I can pay for the shipping to have my board replaced. I spent way to long on the phone with agents blaming everything but the board (probably some new MSI policy cause they have never tried to pass this crap off on me b4), so I have tested everything else and still have dire issues when ever I am using a RAID set-up.
Question 2: What PSU are you running?
Make sure you are not overworking your PSU, as from what MSI told me, this can cause numerous errors and set-up issues.
Well, I hope some of this helped. Maybe it is a driver issue and just not enough people with this board have had to re-install since the new RAID driver was put up in April. Again, I never had problem one before then!!! Other than just basic help that is.

Problem RAID K9A2 platinum /vista X64

hello all,
i have install driver promise raid for K9A2 platinum on vista x64 but when i reboot vista say me raid not install... my bios is 1.4
please help me

hello and thanks,
i installing drivers raid which I downloaded from the site msi, I install and when I reboot vista x64, I have a window that tells me that vista has detected new hardware and if I want him to research driver on the web but they did not find.
if I go in the device manager I see raid controller with an exclamation point ( dont install).
my config:
Amd phenom 9600 BE
MSI K9A2 platinum ( chipset amd 790fx )
HDD samsung Sata 750 Go 32mo
Sapphyre toxic HD3870
2x1Go kingmax 1066
alim 450w

K9A2 Platinum Sata Raid Problems

I could not get my 2 500 gb seagate 7200.11 drives to work on the sb600 raid controller, in raid 1 (set to raid mode in bios). I'd set it up and it would remain functional until I formatted it and put stuff on it. Then when I restarted, it says critical and can't locate the second drive, but it shows up in the list of definable drives. My older 200 gb seagates 7200.9 in the same setup do not have this problem. I finally got my 500s working by hooking them up to the promise controller instead. (Although no longer a current problem, I wouldn't mind knowing what would cause this for future occasions.)
My new problem is, I had to unhook all but the drive I wanted to install Windows XP on (A separate 120 JBOD configured drive) so I could get it to be C:/. This all went fine. However when I hooked up the 500s again, Windows XP would not boot, the screen just stayed black, with them not hooked up, it boots just fine, with the 200s as well. When running the Windows XP setup again, the 500s appear as C:/ instead of the 120 in the disk select screen of the install. It's like the 500s took over the drive letter when they are hooked up and thus can't load. Is there some way to stop it from doing this or am I completely off on this.
My computer spec is:
K9A2 Platinum
AMD X2 6000
2*2gb OCZ PC6400
ATI Radeon 3870
700 Watt OCZ PSU
Update: Installing XP ignoring the fact its not C: fails. It copies all the files onto it, then after restarting I get a black screen.
Another Update: On a whim I tried disabling the SB600 raid and set it to AHCI instead as I read that other people were having problems with it and it all works perfectly now. It's too bad this doesn't work, but I'll just put the 200s back in my old computer instead.

I'm having the exact same problem you did. Same Mobo. Except I started off with Promise RAID 1 because when I tried using SB600 RAID, my SATA DVD drive would not function in Vista Ultimate x64. So I had my Raid 1 configured on Promise T3 with BIOS 2.8.1030.0021 using 2 320GB drives. One of them Seagate, one WD, both 3GB/s transfer, only difference was that Seagate has 16MB cache, while the WD has 8MB. But both drives worked fine in the array for some time, and then after doing some updates from Windows Updates now the Raid config shows that encountered a critial status, "A disk member of an array has failed or is not responding", "Problem is detected with Array : 1". And when I go to the see the Array status it shows the Seagate drive on ID channel 1, but for the 2nd drive it shows questions marks all the way through the item line. I checked the drive, it seems fine. And even when I go to define a second Array, it shows the WD available on channel ID 3. So it definitely see both drives, but how do I re-add that WD drive that it doesn't see to my earlier defined array without loosing data on my Seagate drive?

K9A2 Platinum Cold Boot problem

Hi, recently I have encounter this problem on my K9A2 Platinum that didn't occur before, where after powered off for a few hours, when booting up, there is power to the system but the system won't boot (i.e. no POST or anything). The reset button on my chassis also won't work at that time. And after pressing the power button to shutdown, it won't power up again until I've turn off the mains and wait until the power LED on the mobo to turn off and turning on the mains again.
After that, my system would be able to boot successfully, but the bios clock will be slow by a few hours. E.g. current time 9am, bios time 5am. I've tried flashing the bios to the latest version and resetting the bios settings doesnt help at all.
Can anyone plz help me?
My current rig config is
K9A2 Platinum w/ phenom 9500
6gb kingston ddr2 1066mhz
PowerColor HD3870
Xonar Essence STX
Coolermaster RPP 750w
Thanks a lot in advance.

Quote from: Henry on 23-March-10, 07:29:17
Did your problem start after you added this mixed batch of RAM? When did you add RAM to what you had 2 years ago? AMD works best when only 2 sticks are used and you have messed that up by adding 2 more sticks of different RAM. Does it work OK if you remove two of the sticks?
Not really, I had the mixed batch of ram for almost 8 months without any problems. And the cold boot problem does not happen everytime. I've just tried booting up without any issues this time round. I would see if the problem occurs again and test it with a new cmos battery.

K9A2 Platinum Bus Interface problem

Currently running:
Motherboard: MSI K9A2 Platinum 1.6 Bios
CPU: AMD Phenom 9950 BE (O.C. to 3.0 [200 x 15])
RAM: 8 GB G. Skill 1066 RAM (Underclocked to PC 6400 4-4-4-12 for stability)
GPU: 2x Radeon HD 3870 Sapphire Edition
HDD: 2x Seagate 640 HDD's RAID 0 thru SB600
OS: XP Pro x64
My problem is my 2 GPU's have a max bus width of 16x 2.0. When using GPUz, only the first card is rated at 16x 2.0, while the second is 16x. Both cards are in the dark blue "mazerine" slots, and the BIOS option for High Speed mode in slots x1 and x4 are turned on "auto." Any ideas?

Quote from: Stu on 03-January-09, 02:49:08
Are you actually having any problems using the cards?
Normally I can run Farcry2 on Ultimate at 30-40 FPS no problem, however, with the bus width labeled as such i'm running around 4-5 FPS, so the 2nd card is creating a slowdown. I know the card is fine, because when it runs by itself not in x-fire at PCI-E x16 2.0.

Windows Vista install problem

I own a copy of Windows XP from Virtual PC. I therefore qualify to purchase an upgrade copy of Vista, which I did. Since I am a Mac person I assumed that I would simply be asked, upon installation, to provide my old product ID. In the Microsoft world this does not happen. The install disc looks for the previous version. When it can't find one the install essentially stops. I was able to install Vista by ignoring the request for the product ID but then I could not Activate the copy. It works fine but it will cease to work in 30 days. Has anyone had experience with this type of thing? There should be some way around this type of thing. Reading Microsoft user posts it appears that clean installs can only be done from non-upgrade copies. I cannot install my copy of xp first since it does not have SP2 as part of it. I know that I can theoretically slipstream a copy but that seems like a lot of hassle.

Hi,
Thanks for posting your solution. I had everything working beautifully in Boot Camp partition using VMware Fusion, but felt I needed VM's future tech support. In forum discussion and email support w/VM tech supp. learned that VM doesn't support Vista Home because MS doesn't support it through 3rd party, so I used Home's upgrade advisor and found that the only easly instll was upgrading to Ultimate. Tried to install Ultimate upgrade and got message that partition was too small. Long story short, had to erase Macbk Pro's HD and reinstall from Time Machine, which worked great. Boot Camp finally allowed new partition and I used your solution to install. However, I had to load the Home because Boot Camp couldn't find drivers on the Ultimate upgrade. Still, your work around helped. Problems I'm now encountering is that VM can't find the Boot Camp Partition as it did previously. Any ideas there? I can find the Boot Camp drive, but the "open" button stays grayed out. When I go to VM's HD it says 0 GG which doesn't make sense. I'll post a new topic, but I did appreciate your posting.

K9a2 platinum help installing windows xp with raid

so the situation is this i am installing windows on my computer trying to set up raid 0. i am using the sb600 raid set up i have set everything up in the bios and set fast trak works great till it comes time to install, after formating drive. the moment it begins it tries to copy the files from the disk and says the "ahcix86" cannot be copied and if i try it with promise *moving the drives to the right sata slots* i get the same issue, but this time its the "FTT3" file that cannot be copied. tried 3 different windows xp disks sp1/2/3 I am stuck with the same error. I have tried about every option in the bios and even changed floppy drives and floppy disks multiple times. downloading newer/older drivers as well. i cant even get it to install on one drive.
amd socket am2 4200x2
msi k9a2 paltinum bios 1.4
patriot pc2-5300 667mhz ram
Msi radeon 3850 oc edition
samsung spin point 160gbx2
coolmax 550watt power supply
extra items cdrom drive and floppy
sorry about not posting much before just frustrated.

www.Nliteos.com great program copy your windows CD to a Directory then run Nlite select different options you want, like slipstream service packs and hotfixes, drivers, tweaks, remove stuff from install like MSN, outlook express, do a true unattended intsall (input your key and all that) its pretty powerful then put in a blank CD and hit burn and out spits a new XP disc thats custom for you.
i dont recommend putting ALL your drivers IE video card, sound and all that just the basics then use the proper installers for the big drivers.
check out the forums on the site lots of great info

JDeveloper 11 Vista Install Problem.

Hi I Installed JDeveloper 11 on clean Vista machine. After installation JDeveloper asks me every time on loading set up files association again. Above that I got the next error message on deploying web application on embded Web Logic:
java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener
The full stack trace below:
D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=;D:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;D:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.0.0.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.5/lib/ant-all.jar;D:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;D:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;;
PATH=D:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\native;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;D:\Oracle\MIDDLE~1\patch_cie660\profiles\default\native;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.5\bin;D:\Oracle\MIDDLE~1\JDK160~1\jre\bin;D:\Oracle\MIDDLE~1\JDK160~1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\ASUS Security Center\ASUS Security Protect Manager\bin;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode)
Starting WLS with line:
D:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -DproxySet=false -Djbo.34010=false -Xverify:none -da -Dplatform.home=D:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sysext_manifest_classpath;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath;D:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sysext_manifest_classpath -Dweblogic.Name=DefaultServer -Djava.security.policy=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
<27.10.2008 23:49:52 MSK> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
D:\Oracle\Middleware\patch_wls1030\profiles\default\sysext_manifest_classpath\weblogic_ext_patch.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ja.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ko.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_CN.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_TW.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ja.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ko.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_CN.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_TW.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ja.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ko.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_CN.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_TW.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ja.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ko.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_CN.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_TW.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ja.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ko.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_CN.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_TW.jar>
<27.10.2008 23:49:52 MSK> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun Microsystems Inc.>
<27.10.2008 23:49:52 MSK> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for CR380042 Thu Sep 11 13:33:40 PDT 2008
WebLogic Server Temporary Patch for 7372756 Fri Sep 12 17:05:44 EDT 2008
WebLogic Server 10.3 Mon Aug 18 22:39:18 EDT 2008 1142987 >
<27.10.2008 23:49:53 MSK> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<27.10.2008 23:49:53 MSK> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<27.10.2008 23:49:53 MSK> <Notice> <Log Management> <BEA-170019> <The server log file D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<27.10.2008 23:49:55 MSK> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<27.10.2008 23:49:56 MSK> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
<27.10.2008 23:49:56 MSK> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
<27.10.2008 23:49:57 MSK> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<27.10.2008 23:49:57 MSK> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<27.10.2008 23:49:57 MSK> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<27.10.2008 23:49:57 MSK> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<27.10.2008 23:49:57 MSK> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<27.10.2008 23:49:57 MSK> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<27.10.2008 23:49:57 MSK> <Warning> <Server> <BEA-002611> <Hostname "127.0.0.1", maps to multiple IP addresses: 192.168.0.197, 127.0.0.1>
<27.10.2008 23:49:57 MSK> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.0.197:7101 for protocols iiop, t3, ldap, snmp, http.>
<27.10.2008 23:49:57 MSK> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<27.10.2008 23:49:57 MSK> <Warning> <Server> <BEA-002611> <Hostname "192.168.0.197", maps to multiple IP addresses: 192.168.0.197, 127.0.0.1>
<27.10.2008 23:49:57 MSK> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<27.10.2008 23:49:57 MSK> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
DefaultServer startup time: 8565 ms.
DefaultServer started.
[Running application Application_2 on Server Instance DefaultServer...]
---- Deployment started. ---- Oct 27, 2008 11:50:00 PM
Target platform is (Weblogic 10.3).
Running dependency analysis...
2008-10-27 23:50:01.044: Writing WAR file to D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\Application_2\Application_2-ViewController-webapp
2008-10-27 23:50:01.059: Wrote WAR file to D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\Application_2\Application_2-ViewController-webapp
2008-10-27 23:50:01.683: Writing EAR file to D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\Application_2
2008-10-27 23:50:01.683: Wrote EAR file to D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\Application_2
Deploying Application...
<27.10.2008 23:50:02 MSK> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1225140602682' for task '0'. Error is: 'weblogic.management.DeploymentException: '
weblogic.management.DeploymentException:
     at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:171)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:99)
     at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
     Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
     Truncated. see log file for complete stacktrace
>
<27.10.2008 23:50:02 MSK> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'Application_2'.>
<27.10.2008 23:50:02 MSK> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.management.DeploymentException:
     at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:171)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:99)
     at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
     Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
     Truncated. see log file for complete stacktrace
>
[Deployer:149034]An exception occurred for task [Deployer:149026]deploy application Application_2 on DefaultServer.: .
weblogic.management.DeploymentException:
#### Deployment incomplete. #### Oct 27, 2008 11:50:03 PM
oracle.jdeveloper.deploy.DeployException
     at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
     at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
     at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
     at oracle.jdevimpl.runner.adrs.AdrsStarter$4$1.run(AdrsStarter.java:1316)
Caused by: oracle.jdeveloper.deploy.DeployException
     at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:413)
     at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:238)
     ... 11 more
Caused by: oracle.jdeveloper.deploy.DeployException: Deployment Failed
     at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:395)
     ... 12 more
#### Cannot run application Application_2 due to error deploying to DefaultServer.
[Application Application_2 stopped and undeployed from Server Instance DefaultServer]
Thanks in advance
Andrew

The problem is that my account on Vista has admin rights, besides it i haven't got any listeners defined in web.xml.
<?xml version = '1.0' encoding = 'windows-1251'?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" version="2.5" xmlns="http://java.sun.com/xml/ns/javaee">
<description>Empty web.xml file for Web Application</description>
<session-config>
<session-timeout>35</session-timeout>
</session-config>
<mime-mapping>
<extension>html</extension>
<mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
<extension>txt</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
</web-app>
Best Regards
Andrew

Vista Install Problems

Hello,
I've been having some problems trying to install SQL Sever 2005 on my local Vista machine. Using the ISO file that I've downloaded from the MSDN site (twice now) I get an error stating that the Sql.cab file is corrupt. I at first thougt that this was because of a corrupt download but now I wonder because of a second issue. I downloaded the Express version (twice also) and it will not install either. The error for this comes in the initial unpacking of files with a corrupt file as well. As a side note, when I installed Visual Studio 2005 I received an error on the SQL express install that said 'Unexpected value returned' from some process. If anyone can help, I would appreciated the saved hair follicles.

It is Vista Ultimate and it was the Developer DVD ISO that I burned to a disk. As I noted though I also received an error when trying to install the Express version. The error was different (a corrupt file durring the unpacking) so it may be unrelated. As a side not yesterday I said to hell with it all and formated my local machine and installed XP. I received the same error for both files (with the DVD ISO it was a corrupt SQL.Cab file and corrupt file with the Express version). So now I've successfuly installed 2000 and am hoping to find an upgrade that will work for me. I just can't believe that the ISO file I've downloaded twice was corrupt (I also tried installation by directly mounting the ISO instead of burning it with the same results). And I doubt that the file I'm downloading for the express version is corrupt either.

965 platinum xp install problems

i just installed the p965 platinum today along with 1gb of corsair xms ram and a allendale e6300.
when trying to install windows xp, it starts off by adding all the drivers, then when it says its about st start the install i get a stop error, in which it says its stopped windows so no damage occurs to my sytem.
the code it gives for this is shown here
anyone got an idea what it could be, im asuming it means the pci bus is the problem. ive tried taking out my tv card, disabling the network port as thats on the pci-e bus and ive also tried my graphics card in the other pci-e slot. i cant take the card out as i have only one. however this is the only thing i could think of as i cant say wether or not its the problem
anyone else come across this before? im sure its not common as ive not seen it on this forum after searching

Quote from: GRIMM599 on 22-November-06, 08:16:13
no joy there
ive got the following:
Gainward GeForce 7950GT 512MB,1,4ns DDR3
Intel Core 2 Duo E6600 2.4GHz Socket LGA775, 4MB, BOXED w/fan
MSI P965 Platinum, P965, Socket-775 Firewire,SATAII,ATX,GbLAN,DDR2,PCI-Ex16
Corsair Value S. PC5300 DDR2 2048MB Kit w/two matched Value Select 1024MB
NEC DVD±recorder AD-5170 IDE White OEM DVD+R/+RW/DVD-R/-RW (Dual layer)
Seagate Barracuda 7200.10 320GB SATA2 16MB 7200RPM
oh and a q-tecpsu 550w
think im gonna send the board back cuz ive tried everything and have read alot of other posts with probslems on the msi platinum 965
This PSU will not get you anywhere. It's one of the worst PSU makers worldwide having only peak wattages which is very wrong.
Try another PSU like Antec, Enermax, Tagan, OCZ etc.

Vista Install Problem

So I just recently purchased Windows Vista Home Premium and I start to boot it up. During installation I get done entering the product key and hit install/whatever. Then about 3 seconds later it comes up with an error and says that it can't retrieve a file for install and that the installation has to stop. Any help here. Kinda confused as to why it might be doing this. Thanks

Even if it was an upgrade, it can still work, the method still exists.
WindowsSecrets to Vista Upgrade

Phone support for Windows Vista install problems

What phone support is available for Vista Home Basic install? If you don't know, any ideas on how can I find out?

You may find phone support for Microsoft worldwide on:
http://support.microsoft.com/common/international.aspx

K9A2 Platinum/ problems adding 15k SAS to existing 15k SAS with Vista64 OS

This is my first build. I am trying to add a Fujitsu 15k SAS max3147rc to the existing max3147rc which has the Vista64 on it. Both disk are currently setup in the array under LD1 and LD2. This is the only way I was able to see the 2nd HD without formatting the existing HD which has the Vista 64 on it. Both show up in the arrray as Promise 1+0 Stripe/RAID0. The mode is 1+0 and raid is 0 for both drives.
Only the HD with Vista 64 shows up under my computer. Both drives show up under Disk Management. The one with OS is listed as NTFS and the other is listed as unallocatedand only has the option to make it a New Simply Volume.
Shouldn't both of these drives be on LD1 in raid0 for the fastest speed? How can it be done without formatting the drive with Vista 64 on it
Also, here is a link to a diagram of the SAS cable pinout.
http://www.cs-electronics.com/PDF/18-SAS-7P82-P1m.pdf
K9A2 Platinum/ Vista 64 Ultimate ( currently using new Beta bios because of memory 8gb memory issues)
Apevia case with gauges, 1- 120mm and 3-80mm fans
1- WD 10k raptor
2-15k Fujitsu MAX3147RC
2-2GB GSkill pc8500 1066mhz
AMD Phenom 9600BE
ATI FireGL 5600
1- DVD/CD with litescribe
1- floppy drive
1- multi card reader
OCZ 700watt ps

Bandwidth is useless when latency kicks in.
As IDE drives have a typical latency of 8~10 ms where SAS has 3~4 ms, there is no way IDE will pass SCSI bandwidth or not.
Except when you use 1 task, but a modern PC doesn't do that.
As for money on a decent RAID-controller, IDE (SATA) will not beat SCSI (SAS), no way on earth.
For click-open only access-time matters, bandwidth is second.
For AVI decoding/encoding bandwidth matters, as you have large continues files.
In my test you need to do more then 1 thing, as is common practice today, I used large files (you could use small) as they show you the difference enormously.
Try it and find out, most people that are not used to SCSI drives believe IDE can beat it.....sorry but it's not the case.
Raptors are old poor performing drives when it comes to SCSI, and the controller won't help you....try a real SCSI (SAS) Raid, it will blow you from your feet
Test under linux, gimme the results of your drives in seconds:
Code: [Select]
dd if=/dev/zero of=/export/out.dat bs=1M count=1024
Afer every test, delete the out.dat, show the result screen, then I will show the one for the forum, that has 2 SCSI drives in software-raid1
On a very old machine the result could be this:
Quote
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB) copied, 332.856 seconds, 3.2 MB/s

Houston, we have a problem.. My new K9A2 Platinum will not install an OS

I purchased a K9A2 Platinum (Version 1) and everything went fine with the hookup and install until I went to install the OS.
Here's the set up:
1) 9600 Phenom
2) 4 GB A-Data DDR2 800 RAM (2 2GB Sticks)
3) Diamond HD3870 Video Card.
4) 260 GB WD Caviar Sata Drive
5) LG 18x DVD
note I also Have a 160 GB PATA WD Caviar as well.. more about the in a minute.
I hooked everything up Sata drive as Sata 1 and DVD as Sata 2,
Checked BIOS to be sure everyone was recognized.
Tried to install Vista 64 bit.
Entered Location, activations etc..
and Install began
1) Copied files
2) Expanded files
3) Updated system
(no errors occured during these steps)
System rebooted and got the message Windows is booting for the first time etc...
Then to the finalizing Installation line, which... well.. never gets final (I've left it on that screen for 3+ hours).. Sometimes it locks up.
I tried installing Windows XP and I get through all of the installation, but when it reboots to WIndows from the DVD.. It can't find the OS..
I installed the PATA drive and tried installing Vista to it with no difference in the results. I suspect I am doing something stupid here (I have done this before.. it's my fifth build and never a problem before). A note that on the PATA if I use the Chip Select jumper (Out of the box settings) Everything's recognized but it sets it up as a slave. IF I set it as a lone master the BIOS recoginizes it, but windows doesn't. If I set it up as a master.. the system doesn't post. I am going to try to install XP on the PATA and see if that works, However I want to run Vista on this beast, so even if it does, well I still need help..
Yes I promise, this is all a cry for help... If anyone has any ideas I'd surely be apreciative.. In fact I'd be so appreciative I'd help you remove an garbage (viruses, spyware etc..) for free (ok I do that for free anyway.. I'm cajuntek everywhere I go on the net.. You can find me in the Security Cleanup forum at dslreports most often.. Thanks again for any help you guys can provide on this.

I don't trust [Auto] Vmem in the BIOS.
First, Cajuntek, I would try beta BIOS 1.33.
You can download it from http://www.magnaroute.com/deliver/
This BIOS has been very stable for me, MSI Tech Support gave it to me to attempt to solve memory stability I have had with 4x dual rank memory modules. It doesn't fix that problem but it does make the system more stable and compatible over the publicly released BIOSes as far as I can tell.
I would also suggest you put in a fixed voltage value in the BIOS for your memory. I use 2.3V because I am overclocking. You can probably use 2.0V or 2.1V. It is possible that the [Auto] setting may be giving your system too little voltage on the memory and that may be causing your lockup.

Continuing K9A2 Platinum & Vista Install Problems - new variance

Similar Messages

Maybe you are looking for