Continuing problem with alignment

It is a mystery to me why this problem returned. You can see in the link below that the tops of the Main Content and the Sidebar are not aligned with each other. I had this fixed by adding the overlap:hidden rule to the menubar#1.
http://www.openrangeimaging.com/Test/Gravity-Test/index.html
Then I made the sidebar have round corners. The problem returned. I'm starting to think it may be demonic possession. I have tried all sorts of stuff with the css but just cannot get the MainContent to move up to be aligned with the top of the Sidebar.
I can add 15px top margin to the Sidebar1 and that moves it down into alignment with the Main Content. (15px is the size of the round corner images that make up the corners of the Sidebar. Coincedence?)  It looks ok but it doesn't seem quite right. I'm going to have some of the pages have 2 equal size columns and some 1 large column, may even have a 3 column page. I got the feeling that having to add the top margin to one and not the other is going to cause problems.
Additionally if you click on some of the links to the other pages that I made from the template page prior to adding the round corners you can see that the MainContent moves up to where it should be. (I guess those pages haven't changed to reflect the updated template that they are based on because the Sidebar and MainContent are editable regions in the template?)
Any suggestions on how to fix this? As always thanks for any help

markf12 wrote:
It is a mystery to me why this problem returned. You can see in the link below that the tops of the Main Content and the Sidebar are not aligned with each other. I had this fixed by adding the overlap:hidden rule to the menubar#1.
http://www.openrangeimaging.com/Test/Gravity-Test/index.html
Then I made the sidebar have round corners. The problem returned. I'm starting to think it may be demonic possession. I have tried all sorts of stuff with the css but just cannot get the MainContent to move up to be aligned with the top of the Sidebar.
I can add 15px top margin to the Sidebar1 and that moves it down into alignment with the Main Content. (15px is the size of the round corner images that make up the corners of the Sidebar. Coincedence?)  It looks ok but it doesn't seem quite right. I'm going to have some of the pages have 2 equal size columns and some 1 large column, may even have a 3 column page. I got the feeling that having to add the top margin to one and not the other is going to cause problems.
The alignment issue is being cause by the 'commented out' section of code below:
Change from this:
<!--<div id="sidebar1">
  <h3>GRAVITATION</h3>
    <p>Write store specials and other content in this space. To be updated on a semi-regular basis </p>
    <p>Donec eu mi sed turpis feugiat feugiat. Integer turpis arcu, pellentesque  eget, cursus et, fermentum ut, sapien. Fusce metus mi, </p>
    <!-- end #sidebar1 -->
<!-- </div>-->
To this:
<!-- <div id="sidebar1">
  <h3>GRAVITATION</h3>
    <p>Write store specials and other content in this space. To be updated on a semi-regular basis </p>
    <p>Donec eu mi sed turpis feugiat feugiat. Integer turpis arcu, pellentesque  eget, cursus et, fermentum ut, sapien. Fusce metus mi, </p>
    </div> -->

Similar Messages

  • Post Moved Continual-problem-with-SMTP-passwor...

    Post Moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/Continual-problem-with-SMTP-password-being-blocked/td-p/...
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    Post Moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/Continual-problem-with-SMTP-password-being-blocked/td-p/...
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Problem with align element.

    Hi everybody,
    i have a problem with align element on my page. I explain:
    i have used into a panel page a panel group to align my element horizontal, but when i set the vertical-align on top, the element are align in middle.
    Now is......
    text text text text text text
    text text text text text text
    text text text text text text
    text text text text text text tablelayout
    text text text text text text
    text text text text text text
    text text text text text text
    But i wont........
    text text text text text text tablelayout
    text text text text text text
    text text text text text text
    text text text text text text
    text text text text text text
    text text text text text text
    text text text text text text
    Thanks.

    Have you tried using a panelHorizontal instead of a panelGroup?
    The components are automatically laid out horizontally and it has a Valign property that you can set to top.

  • I have continuous problems with my iPad Mini, and it is getting worse!  Newstand application keep pausing or crashing, websites keep hanging first time in but then open fine the second time, and I have problems with applictions crashing.

    I have continuous problems with my iPad Mini, and it is getting worse!  Newstand application keep pausing or crashing, websites keep hanging first time in but then open fine the second time, and I have problems with applictions crashing.  Has anyone experienced similar problems and any suggestions?

    Has the device always behaved this way? Did this start as a result of an update to the iOS software? If the problem is that bad, you should probably restore the iOS software and then restore from a backup. If that fails, restore as new and rebuild the device. If that fails, it's time for a trip to an Apple Store to let them have a look at the iPad.
    Use iTunes to restore your iOS device to factory settings

  • A few months ago I bought an imac 27 inch late 2013 ... ever since I have continuously problems with my external HDD that disconnect all the time and cause problems in other software (Lightroom, Adobe PS CS6) ...

    a few months ago I bought an imac 27 inch late 2013 .. §16GB - and flash memory) - 3,3 Ghz Intel Core 15
    ever since I have continuously problems with my external HDD that disconnect all the time and cause problems in other software (Lightroom, Adobe PS CS6) ... it is not  a HDD problem, because it occurs with my 3TB WD HDD (Time Machine), my 1TB WD and  1TB IOMEGA
    any one have a solution? anyone dealt with this problem in the apple care program?

    You are still under warranty and/or have AppleCare.  Call them.  Let them deal w/it.

  • Problem with align and Selection Tool.

    This is a weird problem which I cannot explain at all.
    I am using AI CS3 with Windows XP.
    I am having this completely random problem with the selection tool and align pallette I cannot explain.
    I have a group of objects and groups of objects I am trying to use the align pallette on.
    Sometimes when I select all of the items I want to align, either by shift-clicking each one, or by drag-selecting them I am getting a random behavior where sometimes the align button will move all of the objects COMPLETELY off of the artboard, all the way to the edge of the working area and beyond into the grey area you cannot see.
    Normally, this would be caused by a stray point somewhere way off-screen or some other cleanup oriented thing on my part. However in this case, the behavior is random and does not happen every time I hit the align button.
    Sometimes it takes items within my grouped objects (lines of text) and moves THEM completely off the work area, leaving the other items in the groups in place. Sometimes the bounding box when I drag-select the items will stretch extremely far off of the work area.
    I have even dragged the extra large bounding box, bringing the edge that was once way off screen onto the work area, in outline view, in hopes of finding the stray point or object that could be causing this. However NOTHING appears that can be causing the align to throw all of my objects off-screen.
    The random nature of this behavior and the way it sometimes affects my text objects inside of groups leads me to believe it is a program bug and nothing I am doing.
    The behavior takes place regardless if I select by dragging or by shift-clicking, and is happening in more than one file, also randomly.
    Also, choosing "align to art board" vs. "align to crop area" does nothing to change this behavior.
    It is quite irritating. I've been using illustrator since v.88 so I have enough experience to know this is not normal.
    Any help with this one would be greatly appreciated.

    When this behaviour occurs, are perhaps guides included in your selection?

  • Event Viewer reporting continuous problem with Firefox

    I had to disable McAfee Site Advisor because if enabled I could not use the back and forth arrows on the browser in some instances. In trying to track this problem down I discovered there is a continuous problem reported in Event Viewer with this information:
    The entry <C:\USERS\CINDY\APPDATA\LOCAL\MOZILLA\FIREFOX\PROFILES\PV0GC0WS.DEFAULT\CACHE\_CACHE_003_> in the hash map cannot be updated.
    Context: Application, SystemIndex Catalog
    Details:
    A device attached to the system is not functioning. (0x8007001f)
    Can anyone please help with this?

    The error could be something trivial, it will depend really on what problems you are having, and I note you have made a few other posts.
    * One article you may find useful is [[Basic troubleshooting]]
    * Also see [[Safe Mode]] & [[Troubleshooting extensions and themes]]
    ** Note when using safe mode normally do not make changes in the first dialogue Window you see just click on the continue button (Unless you really do want to reset something)
    ** Also note whilst Safe Mode does disable plugins, it will not always stop all external software interacting with firefox .
    A basic principle of troubleshooting is to reduce as many unknown interactions as possible, so in the case of Firefox disabling or removing as many extras as possible.
    If you are determined to check what is in the firefox caches then use ''about.cache'' simply type it into the location bar and hit return, it is relatively user friendly and shows masses of info about what is cached, there is also an [https://addons.mozilla.org/en-us/firefox/addon/cacheviewer/ add-on cacheviewer] Even without the add-on you may be able to figure out what the item is, and whether or not it is updating.
    I do not even use Vista, but presumably an event log entry may not necessarily relate directly to Firefox use.
    ''"in the hash map cannot be updated.
    Context: Application, SystemIndex Catalog "''
    I would hazard a guess that the above message may relate to disk indexing; if so it will possibly have nil impact upon Firefox operation.
    I do recall problems being mentioned on this forum about Site Advisor and Firefox, and note some versions are on the [https://www.mozilla.com/en-US/blocklist/ blocklist] for Firefox 4. If you have problems with SiteAdvisor it would be worth ensuring you have the very latest compatible release of Site Advisor.

  • JSpinner problems with alignment of text

    I experience problems with the alignment of the text within the spinner. I read a few topics on this forum. Many answers point to the solution of grabbing the JFormattedTextField from the spinner and call the setHorizontalAlignment(int) method. Seems hat doesn't work for me.
    Here is the code I wrote:
    SpinnerDateModel dateModel = new SpinnerDateModel();
    JSpinner dateSpinner = new JSpinner(dateModel);
    JSpinner.DateEditor dateEditor = (JSpinner.DateEditor)dateSpinner.getEditor();
    JFormattedTextField tf = dateEditor.getTextField();
    tf.setHorizontalAlignment(JFormattedTextField.RIGHT);
    maybe I am missing something. Please help!
    Thank You in advance.

    I'm not sure if this is the solution, but the getTextField() Method should be called on a JSpinner, rather than a SpinnerDateModel. I took this Method from the Swing Tutorial and made it static, so i could use it anywhere:
    public static JFormattedTextField getTextField(JSpinner spinner) {
              JComponent editor = spinner.getEditor();
              if (editor instanceof JSpinner.DefaultEditor) {
                   return ((JSpinner.DefaultEditor)editor).getTextField();
              } else {
                   System.err.println("Unexpected editor type: "
                                          + spinner.getEditor().getClass()
                                          + " isn't a descendant of DefaultEditor");
                   return null;
         }Besides, setting an Editor for this JSpinner is not neccesary, because it is chosen automaticaly. You only need to do so if you have implemented a custom SpinnerModel.
    Hope this was any help...

  • Continual problem with the Adjustment brush in both Lightroom 3 and Lightroom 4

    The Adjustment brush in both Lightroom 3 and Lightroom 4 continually stops functioning correctly - that is any adjustment made using the sliders in the Adjustment Brush panel does not make an adjustment on the image.      Normally I would go to Library / Preferences [on my iMac OSX 10.6.8], remove the com.adobe.Lightroom3.plist file and restart Lightroom.     However I have gone to Library/Preferences and there is no listing of any Lightroom 3 plist files, nor for that matter any adobe Photoshop CS5 plist files or any adobe Lightroom 4 plist files.      I have tried restarting the iMac but to no avail - no help at all!      I have no idea how to remedy the situation as I have no idea where the plist files have gone!!!
    Incidentally I have a new iMac 27" OSX 10.8 - same problem with the Adjustment Brush there, but so far the plist files haven't disappeared into the ether somewhere!
    Help would be appreciated  ...
    Many thanks

    Hi Jussi
    I tried changing to the B brush set, and the Adjustment Brush worked OK in there for a while - but now I have the same problem with the B brush set too.     It appears to happen instantly - one minute they're working, the next minute they're not!!         For example, I was adjusting Brightening using the Adjustment Brush and I literally made an adjustment on one image, then went back into the same image seconds later to make a further Brightening adjustment and the brush wasn't working - well, that is, not unless I pushed the slider to something like 160 and then I got minimal adjustment!!!       I am becoming increasingly frustrated  ..   I have literally worked for months with no problems, now it's almost every day!!

  • Continuing problem with 21 XL cartridge

    I bought a 21 XL cartridge for my PSC 1410 a week ago. First for one print everything worked fine. The next time I tried to print it showed the "low ink level" appeared and I followed the instructions on the website http://h41112.www4.hp.com/promo/21xl-info/uk/en/trigger.html and ignored it. But I could not just continue printing as sugested on the website. The red LED-light kept on blinking,the display sowed "E" for empty. After several laptop restarts, taking the cartridges out and puting them in again and dis-and reconecting the USB cable I could print again this morning. But now that I restarted my laptop again the same problem occured and I can't seem to fix it. The warning is also shown in another design as the website suggests. It is very very annoying and timeconsuming!!!
    I'm glad for any info/tips!Thanks in advance!

    I am having the same problem with the 7500 All in One.
    The color ink is great. THe XL black isn't printing. I am ging to get a regular black ink tomorrow and see if that works.
    CJNY

  • Continued problems with Adobe Reader 9.3.1

    Adobe Reader stops at the half-way mark in the progress block when loading a form to print.  Cannot get this fixed. Does anyone out there have a fix for this.  Is Adobe even recognizing that there is a problem with this.  Error message keeps telling me that there is a problem with Adobe Reader, exit and try again.

    I haven't been able to print any .pdf files since I downloaded 9.3.
    My message says Internet Explorer has closed it down because of data executable files.  I've changed my DEF settings to allow
    Adobe Reader but it still doesn't work.  I never had any problems before with newer versions.

  • Continuing problems with Audigy2 Zs Drivers. Help!

    Hi all,
    I have had a recurring problem now that has gone on for far too long and is really killing me. I have the specs for the computer in my signature.
    What happens, is everything works perfectly well until I install my Creative Audigy2 Zs Drivers for my second soundcard. Then when the computer reboots, the pc halts just before desktop to a blank screen for something like 30-45 minutes. The only way I can bootup, is if I remove every USB device from the system. It doesn't matter what USB device is plugged in, the computer just won't boot.
    I have tried everything: updating drivers, changing around sound card PCI slot, changing IRQ's but nothing seems to fix the problem until I uninstall the soundcard drivers, where everything boots up as normal.
    I really don't understand this, and i'm suprised noone else I can see are having problems with this soundcard, and drivers. I have searched the interweb for a solution, and others that are having this problem, but to no avail so far
    Many thanks for any help,
    Dan

    Quote from: Ui30 on 12-July-05, 22:34:52
    I really don't recognize this problem, but I wonder: what is your first soundcard? Is it an onboard one? Did you try uninstalling those drivers, then install the creative drivers and then reinstall the drivers of the first soundcard? (I asume you want to have two cards installed ..... may I ask why, just curious ...)
    My first sound card is the onboard MSI 5.1 chip. I need two soundcards for flightsim (one for aircraft sound, one for vatsim atc). I have tried installing the creative before installing the onboard card, but the same thing
    Quote
    The second thing I can tell you: Creative often makes crappy drivers. One thing you could try is to start MSCONFIG (Start -> Run), and uncheck the SBDrvDet (or SBDrvDetect) in the Startup tab. That item causes some problems...
    I will try that thanks. Could this be an IRQ problem (i am quite a newbie when it comes to irq's)
    What do you think about beta bios drivers

  • Continuing Problems with VOD

    For nearly a month now I have had problems with VOD.  Any time I try to use VOD, whether its HBO, Showtime or one of the other channels, the video starts and immediately pixilates and the audio breaks up.  I have had two different FIOS techs to my house and the last tech after spending hours checking everything finally convinced the people at the "central office" that the problem was at their end.  They promised to fix, reset  or replace one of the cards at the CO to fix the problem overnight.  When I checked the next day, the problem had gotten worse -more pixilation, broken up audio.  On 6 consecutive days I have called tech support and each day they tell me they are in the process of resetting or replacing the card and give me a time by which they expect the problem to be fixed.  Needless to say, when I check the next day, the issue had not been resolved.  I did learn from the tech that the problem card is something called a GigE card.  At this point there must be hundreds if not thousands of other FIOS users experiencing the same problem.  It is now going on a month since VZ has been unable to provide me a service they promote so heavily.  And since I only watch TV in a time shifted manner, the triple play that costs me over $180/month has become virtually worthless to me.
    VZ needs to address this problem.  If not, I guess I will have to do the unthinkable and switch back to Cablevision.

    Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases".  You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information.  This should be checked on a frequent basis  as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

  • Continual Problems with Skype-to-Skype calls TO Sw...

    Let's see if the Skype Customer Service will respond to this inquiry in a manner which indicates that they have completely read and understood the situation which I am about to explain.
    Over the past 8 years, I have been regularly using Skype to call family in Switzerland. That's Skype-to-Skype, not Skype-to-phone. I have either used a modern Macintosh (OS 10.6.8, using Skype 6.15) or most recently an iPhone5 (OS 8.1.3) and the downloaded Skype App. The person with whom I have been speaking in Switzerland has been using either a modern Windows PC or iPhone5.
    Each time, I can't call them, and the person over there must first call me.
    Each time, I can transmit a live picture to them, but I can not receive their picture.
    Oh, yes, I just tried to message Skype Customer Service about this issue, and received the following message: “500 - Internal server error. There is a problem with the resource you are looking for, and it cannot be displayed.”

    Customer service has received your request and working on it.
    Andre
    If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

  • SCOM 2012 R2 Continued Problems with State Widget

    Hi All,
    Just want to see if anyone is seeing problems with the state widget in R2. Confirmed that if the criteria selection page is left blank, that the widget will render, if anything is selected it just loads and loads and loads finally with an error (follows,
    first). Corresponding error in event log (follows, second). I thought this was resolved with UR4?
    Error in console===============
    Microsoft.EnterpriseManagement.Common.UnknownDatabaseException:
    The query processor ran out of internal resources and could not produce a query
    plan. This is a rare event and only expected for extremely complex queries or
    queries that reference a very large number of tables or partitions. Please
    simplify the query. If you believe you have received this message in error,
    contact Customer Support Services for more information.
       at
    Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String
    methodName, Message message)
       at
    Microsoft.EnterpriseManagement.Common.Internal.EntityObjectsServiceProxy.GetRelatedManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions(IList`1
    parentManagedEntityIds, Boolean recurse, IList`1 managedEntityTypeIds, IList`1
    managedEntityBaseTypeIds, IList`1 criterias, String languageCode,
    InstanceQueryOptions instanceQueryOptions)
       at
    Microsoft.EnterpriseManagement.InstancesManagement.GetRelatedObjectsInternal[T](ICollection`1
    instanceIds, ICollection`1 criteriaCollection, TraversalDepth traversalDepth,
    ObjectQueryOptions queryOptions)
       at
    Microsoft.EnterpriseManagement.Management.DataProviders.ManagedEntityProvider.GetContainedManagedEntities(IDataObjectCollection
    targetEntities, ICollection`1 recursionTypeNames, ICollection`1 baseTypeNames,
    String criteriaString, List`1 valueDefinitions, List`1 sortValueDefinitions,
    String typePropertyName, String typeWithIconPropertyName, Boolean
    propertyCollectionRequested)
       --- End of inner exception stack trace ---
       at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethodInvoker.Invoke()
       at
    Microsoft.EnterpriseManagement.Monitoring.DataProviders.RetryCommandExecutionStrategy.Invoke(IDataProviderCommandMethodInvoker
    invoker)
       at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway
    gateWay, DataCommand command)
       at
    Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.ExecuteInternal[TResult](DataCommand
    command)
       at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.<ExecuteAsync>b__0[TResult](<>f__AnonymousType0`1
    data)
    Error in Event Log==============
    GetRelatedManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions
    for session ID uuid:9078152d-9ff1-4c68-a997-c8088a16a34c;id=5.<o:p></o:p>
    Exception
    message: The creator of this fault did not specify a Reason.<o:p></o:p>
    Full
    Exception:
    System.ServiceModel.FaultException`1[Microsoft.EnterpriseManagement.Common.UnknownDatabaseException]:
    The creator of this fault did not specify a Reason. (Fault Detail is equal to
    The query processor ran out of internal resources and could not produce a query
    plan. This is a rare event and only expected for extremely complex queries or
    queries that reference a very large number of tables or partitions. Please
    simplify the query. If you believe you have received this message in error,
    contact Customer Support Services for more information.).<o:p></o:p>
     <o:p></o:p>

    I am so sorry for my mistake. Below is the url.
    http://blogs.technet.com/b/scom_atlas/archive/2013/10/22/scom-2012-sp1-ur4-is-out.aspx
    Juke Chou
    TechNet Community Support

Maybe you are looking for