Continuity Bluetooth Calling & SMS on Macbook Pro (via iPhone 5) Not Working

Devices:
Macbook Pro Mid-2010 running OSX 10.10.2
Iphone 5 running iOS 8.1.3
*NOTE: I understand that due to the version of the Bluetooth protocol in my machine, not all continuity features are available (Handoff, Air Drop, MBP Instant Hotspot)
However SMS to IMessage and the ability to make and receive calls from my Mac should be OK according to Apple's system requirements one-sheeter:
System requirements for Continuity on iPhone, iPad, iPod touch, and Mac - Apple Support
================================================================================ =====================
Here's my problem.
I finally took the plunge last night and updated my iPhone 5 from 7.1 to 8.1.3 to access the iCloud Drive and additional continuity features integrated into Yosemite.
When I tried to pair my iPhone 5 with my MBP over Bluetooth, all seemed to go well for the first 5 seconds.
- Both devices were in discovery mode.
- Mac saw the phone and displayed a security code
- iPhone displayed the same security code and asked if I would like to pair with MBP
- Pairing took place. Each devices Bluetooth profile / device showed up in my MBP Bluetooth's Preferences  and in my iPhone's Bluetooth.
- 5 seconds later, there's no connection between devices.
My iPhone displays:
"Connection Unsuccessful: Make sure [Macbook Pro] is turned on and in range." (The phone is 5 inches away)
Then sometimes I get this message:
"Connection Unsuccessful: [Macbook Pro] is not supported.
No rhyme or reason between the two either.
Here's the baffling part: When I activate my Phone's HotSpot function, the Bluetooth works and connects with my MBP allowing it to use my cell phone network's data for internet connectivity.
I don't understand what is going on or how to correct this? Can anyone succinctly explain how to correct this problems in layman terms?
If the devices can communicate long enough to exchange security codes and verify their identities, then use Hotspot,  there is clearly a data exchange happening. Where is the break down taking place when it comes time to stay connected to so I can continue to use the limited continuity features.
I've seen this question posted before by people having problems with different model years of MBP including the most recents models, so I know it's not mutually exclusive to my model year, but cannot seem to find clarity on an answer.

Handoff Continuity Troubleshooting
iPhone, iPad, iPod touch, and Mac using Continuity - Connect

Similar Messages

  • Airdrop between Macbook Pro and iPhone 5 not working

    Hi, I'm trying to use Airdrop between my Macbook Pro 17" (early 2009) running OS Yosemite, and my iPhone 5 running IOS 8.0.2, but it is not working.
    All the specs on both of my laptop and iPhone seem to be ok, as Apple says in the System Requirements.
    I've verified that Airdrop works fine betwen my Macbook Pro and other Mac laptops, but not with my iPhone.
    I've all tried, but it's impossible, it doesn't work, and it should work.
    I attach a screenshot showing the specs of my Macbook Pro, as well as the System Requirements.
    Please,any solution?
    Thank you.

    From Mac Basics: AirDrop lets you send files from your Mac to ...
    "In order to transfer files between a Mac and and an iPhone, iPad or iPod touch, your iOS device needs iOS 7 or later installed and your Mac needs to be a 2012 or later model."

  • My macbook pro 15' sound is not working, every time i turn on the internal speakers they just turn back off, and i have already tried putting in my headphones 5 or 6 time

    my macbook pro 15' sound is not working, every time i turn on the internal speakers they just turn back off, and i have already tried putting in my headphones 5 or 6 time

    Hi eleni_georgia,
    Welcome to Apple Support Communities.
    The article linked below provides some additional tips that will help you resolve the audio issue that you described.
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/TS1574
    Cheers!
    -Jason

  • My MacBook Pro internal speakers are not working, what happened?

    My MacBook Pro internal speakers are not working, what happened? If I plug in earbuds or external speakers, there is sound. In sound preferences, internal speakers are not a choice. Why doesn't my internal speakers work?

    Hopefully one of these steps should solve the problem.
    1. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    2. Reset PRAM.  http://support.apple.com/kb/PH4405
    3. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    4. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.
    Best.

  • HT1349 Why bluetooth cannot connect between MacBook Pro and iPhone 3? If I need how?

    I'm trying to connect ipnone 3 and MACBook Pro through bluetooth for photo transfer...but unable to recongnise, please advise?

    "I tried enabling Bluetooth on my MacBook Pro and iPhone, thinking I could file transfer some photographs."
    This is not a feature of iphone.  Never has been.
    Other than tethering for internet, where provided by the carrier, you cannot connect to a computer/device/phone and do anything.
    Bluetooth is for handsfree telephone devices/headsets, stereo speakers/headsets, some keyboards, some peer to peer apps from the app store and tethering where provided by the carrier.

  • IMessage works on MacBook Pro and iPhone but not iMac

    I am able to send messages via SMS and iMessage on my MacBook Pro and iPhone 5S but not on my iMac.  On the iMac I get "Not Delivered" and "Try Again". I verified that the same iCloud account is being used on all.  I can tell that the iMac and the phone are pairing as I get a message to that effect when I log into the iMac.  All software is up to date 10.10.1 on the Macs and 8.1.2 on the iPhone.
    I have tried logging out of my iCloud account on the iMac and logging back in.  I have tried removing com.appple.imagent.plist from my Library/Preferences and rebooting.  Neither worked though removing the plist file appeared to work but in reality the messages were not being delivered.  Later the behavior went back to giving the error messages.
    I have reported this to Apple but was hoping someone had found a solution.
    This is from the log file when I try to send a message (my iCloud account replaced with xxxxxx, phone number I was texting to replaced with pppppp).
    12/28/14 10:31:13.240 AM
    imagent[617]
    [Warning] certForURI: IDSAccount: 0x7fc680e14f40 [Service: com.apple.madrid  User: xxxxxx  ID: E583D98B-B71D-43E3-9377-F25AAE4CCFC3  Type: Apple ID  Active: YES  Registration Status: Registered] - No cert found, not in registered URI set
    12/28/14 10:31:13.241 AM
    imagent[617]
    [Warning] certForURI: IDSAccount: 0x7fc680e14f40 [Service: com.apple.madrid  User: xxxxxx  ID: E583D98B-B71D-43E3-9377-F25AAE4CCFC3  Type: Apple ID  Active: YES  Registration Status: Registered] - No cert found, not in registered URI set
    12/28/14 10:31:13.261 AM
    imagent[617]
    [Warning] callerURI - No bindings !!
    12/28/14 10:31:13.261 AM
    imagent[617]
    [Warning] callerURI - No bindings !!
    12/28/14 10:31:13.262 AM
    imagent[617]
    [Warning] Request to send message: IMMessageItem[outgoing: YES sender=e:xxxxxx; service=iMessage; handle=+1pppppp ; unformatted=(null); country=(null); roomName='(null)'; flags=c; subject='<< Message Not Loggable >>' text='<< Message Not Loggable >>' messageID: 0 GUID:'41EF304E-50D5-4D68-9D3C-665EEB431329' date:'441484273.218647' date-delivered:'0.000000' date-read:'0.000000' date-played:'0.000000' transfer guids: '(null)' empty: YES finished: NO sent: NO read: NO delivered: NO audio: NO played: NO from-me: YES DD results: NO DD Scanned: NO Downgraded: NO emote: NO expirable: NO expire-state: 0 error: 0] to chat: IMDChat: 0x7fc680d3b190 GUID: iMessage;-;+1pppppp
    Style: - State: 3 Participants: (
        "[IMDHandle: <+1pppppp:(null):US>]"
    )  Room Name: (null)  Display Name: (null)  Identifier: +1pppppp  Unread count: 0  Row ID: 2  Group ID: 8A1D6346-0B77-4800-A4C8-B85CCB972B69  from NIL ID  fromAccount: IDSAccount: 0x7fc680e14f40 [Service: com.apple.madrid  User: xxxxxx  ID: E583D98B-B71D-43E3-9377-F25AAE4CCFC3  Type: Apple ID  Active: YES  Registration Status: Registered]
    12/28/14 10:31:13.262 AM
    imagent[617]
    [Warning] Request to send message: IMMessageItem[outgoing: YES sender=e:xxxxxx; service=iMessage; handle=+1pppppp; unformatted=(null); country=(null); roomName='(null)'; flags=c; subject='<< Message Not Loggable >>' text='<< Message Not Loggable >>' messageID: 0 GUID:'41EF304E-50D5-4D68-9D3C-665EEB431329' date:'441484273.218647' date-delivered:'0.000000' date-read:'0.000000' date-played:'0.000000' transfer guids: '(null)' empty: YES finished: NO sent: NO read: NO delivered: NO audio: NO played: NO from-me: YES DD results: NO DD Scanned: NO Downgraded: NO emote: NO expirable: NO expire-state: 0 error: 0] to chat: IMDChat: 0x7fc680d3b190 GUID: iMessage;-;+1pppppp Style: - State: 3 Participants: (
        "[IMDHandle: <+1pppppp:(null):US>]"
    )  Room Name: (null)  Display Name: (null)  Identifier: +1pppppp  Unread count: 0  Row ID: 2  Group ID: 8A1D6346-0B77-4800-A4C8-B85CCB972B69  from NIL ID  fromAccount: IDSAccount: 0x7fc680e14f40 [Service: com.apple.madrid  User: xxxxxx  ID: E583D98B-B71D-43E3-9377-F25AAE4CCFC3  Type: Apple ID  Active: YES  Registration Status: Registered]
    12/28/14 10:31:13.262 AM
    imagent[617]
    [Warning] Group message controler failed to prepare chat: IMDChat: 0x7fc680d3b190 GUID: iMessage;-;+1pppppp Style: - State: 3 Participants: (
        "[IMDHandle: <+1pppppp:(null):US>]"
    )  Room Name: (null)  Display Name: (null)  Identifier: +1pppppp  Unread count: 0  Row ID: 2  Group ID: 8A1D6346-0B77-4800-A4C8-B85CCB972B69  error: 4
    12/28/14 10:31:13.263 AM
    imagent[617]
    [Warning] Group message controler failed to prepare chat: IMDChat: 0x7fc680d3b190 GUID: iMessage;-;+1pppppp Style: - State: 3 Participants: (
        "[IMDHandle: <+1pppppp:(null):US>]"
    )  Room Name: (null)  Display Name: (null)  Identifier: +1pppppp  Unread count: 0  Row ID: 2  Group ID: 8A1D6346-0B77-4800-A4C8-B85CCB972B69  error: 4
    12/28/14 10:31:20.390 AM
    imagent[617]
    [Warning] certForURI: IDSAccount: 0x7fc680e14f40 [Service: com.apple.madrid  User: xxxxxx  ID: E583D98B-B71D-43E3-9377-F25AAE4CCFC3  Type: Apple ID  Active: YES  Registration Status: Registered] - No cert found, not in registered URI set
    12/28/14 10:31:20.391 AM
    imagent[617]
    [Warning] certForURI: IDSAccount: 0x7fc680e14f40 [Service: com.apple.madrid  User: xxxxxx  ID: E583D98B-B71D-43E3-9377-F25AAE4CCFC3  Type: Apple ID  Active: YES  Registration Status: Registered] - No cert found, not in registered URI set
    12/28/14 10:31:20.414 AM
    imagent[617]
    [Warning] callerURI - No bindings !!
    12/28/14 10:31:20.414 AM
    imagent[617]
    [Warning] callerURI - No bindings !!
    12/28/14 10:31:20.481 AM
    imagent[617]
    [Warning] Request to send message: IMMessageItem[outgoing: YES sender=(null); service=iMessage; handle=+1pppppp; unformatted=(null); country=(null); roomName='(null)'; flags=100005; subject='<< Message Not Loggable >>' text='<< Message Not Loggable >>' messageID: 1948 GUID:'41EF304E-50D5-4D68-9D3C-665EEB431329' date:'441484280.000000' date-delivered:'0.000000' date-read:'0.000000' date-played:'0.000000' transfer guids: '(null)' empty: NO finished: YES sent: NO read: NO delivered: NO audio: NO played: NO from-me: YES DD results: NO DD Scanned: YES Downgraded: NO emote: NO expirable: NO expire-state: 0 error: 0] to chat: IMDChat: 0x7fc680d3b190 GUID: iMessage;-;+1pppppp Style: - State: 3 Participants: (
        "[IMDHandle: <+1pppppp:(null):US>]"
    )  Room Name: (null)  Display Name: (null)  Identifier: +1pppppp  Unread count: 0  Row ID: 2  Group ID: 8A1D6346-0B77-4800-A4C8-B85CCB972B69  from NIL ID  fromAccount: IDSAccount: 0x7fc680e14f40 [Service: com.apple.madrid  User: xxxxxx  ID: E583D98B-B71D-43E3-9377-F25AAE4CCFC3  Type: Apple ID  Active: YES  Registration Status: Registered]
    12/28/14 10:31:20.481 AM
    imagent[617]
    [Warning] Request to send message: IMMessageItem[outgoing: YES sender=(null); service=iMessage; handle=+1pppppp; unformatted=(null); country=(null); roomName='(null)'; flags=100005; subject='<< Message Not Loggable >>' text='<< Message Not Loggable >>' messageID: 1948 GUID:'41EF304E-50D5-4D68-9D3C-665EEB431329' date:'441484280.000000' date-delivered:'0.000000' date-read:'0.000000' date-played:'0.000000' transfer guids: '(null)' empty: NO finished: YES sent: NO read: NO delivered: NO audio: NO played: NO from-me: YES DD results: NO DD Scanned: YES Downgraded: NO emote: NO expirable: NO expire-state: 0 error: 0] to chat: IMDChat: 0x7fc680d3b190 GUID: iMessage;-;+1pppppp Style: - State: 3 Participants: (
        "[IMDHandle: <+1pppppp:(null):US>]"
    )  Room Name: (null)  Display Name: (null)  Identifier: +1pppppp  Unread count: 0  Row ID: 2  Group ID: 8A1D6346-0B77-4800-A4C8-B85CCB972B69  from NIL ID  fromAccount: IDSAccount: 0x7fc680e14f40 [Service: com.apple.madrid  User: xxxxxx  ID: E583D98B-B71D-43E3-9377-F25AAE4CCFC3  Type: Apple ID  Active: YES  Registration Status: Registered]
    12/28/14 10:31:20.482 AM
    imagent[617]
    [Warning] Group message controler failed to prepare chat: IMDChat: 0x7fc680d3b190 GUID: iMessage;-;+1pppppp Style: - State: 3 Participants: (
        "[IMDHandle: <+1pppppp:(null):US>]"
    )  Room Name: (null)  Display Name: (null)  Identifier: +1pppppp  Unread count: 0  Row ID: 2  Group ID: 8A1D6346-0B77-4800-A4C8-B85CCB972B69  error: 4
    12/28/14 10:31:20.482 AM
    imagent[617]
    [Warning] Group message controler failed to prepare chat: IMDChat: 0x7fc680d3b190 GUID: iMessage;-;+1pppppp Style: - State: 3 Participants: (
        "[IMDHandle: <+1pppppp:(null):US>]"
    )  Room Name: (null)  Display Name: (null)  Identifier: +1pppppp  Unread count: 0  Row ID: 2  Group ID: 8A1D6346-0B77-4800-A4C8-B85CCB972B69  error: 4
    12/28/14 10:31:20.806 AM
    com.apple.iCloudHelper[1018]
    objc[1018]: Class FALogging is implemented in both /System/Library/PrivateFrameworks/FamilyCircle.framework/Versions/A/FamilyCircl e and /System/Library/PrivateFrameworks/FamilyNotification.framework/Versions/A/Famil yNotification. One of the two will be used. Which one is undefined.
    12/28/14 10:31:20.813 AM
    com.apple.xpc.launchd[1]
    (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    I look forward to any advice anyone can provide. Thanks.

    Based on information in another answer I tried the following ...
    After doing what blueno suggested I did have to reboot.  I then had to provide my password lots of times when I logged in.  That still didn't work so I logged out of my iCloud account in Message and logged back in, repaired, and it worked!
    This is what I did:
    1) Open Key Chain Access ( go to Applications>Utilities)
    2) Select Login at the top left side under Keychains
    3) Select All Items on the lower left side under Category
    4) Search for entries of IDS.
    5) Highlight and delete all entries that has IDS.
    6) Search for entries of FaceTime
    7) Highlight and delete all entries of FaceTime
    8) Search for entries of Messages (I also found entries containing Message (singular, not plural), but didn't delete these.)
    9) Highlight and delete all entries of Messages
    10) Reboot!
    11) Log back in and when requested log back into iCloud account (I got asked for the password multiple times)
    12) Log out of iCloud account in iMessage (Not sure if this is needed)
    13) Log back into iCloud account in iMessage.
    14) On iPhone in Settings/Messages/Text Message Forwarding turn off forwarding to my iMac.
    15) Turn Text Message Forwarding back on for my iMac (re-pairs and I entered the new number)
    16) Could send text messages from my iMac!!!!!
    But it was short lived.  One message was sent using SMS (that should have gone through using iMessage and then back to the same error message.  So I am back to square one.

  • Macbook pro (early 2008): Trackpad not working under Windows XP

    My Trackpad worked regularly under Windows (Bootcamp) and Mac OSx until some months ago my Motherboard had to be exchanged because of a fault function of the graphics card. When I started Macintosh after the Macbook pro was repaired the Trackpad worked regularly, but under windows the mouse didn't react to moving the finger or clicking. I reinstalled the drivers, but this didn't fix the problem.
    What shall i do now? Thank you for any advices.

    since my mac is year and two months old (funny, two months and you are screwed).
    Not if you had of purchased Apple Care.  You would have been covered for 3 years.
    What I would like to say to the Apple:
    This is not the place as Apple does not come to these forums. 
    These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily.  No one here works for Apple nor does Apple get involved in responding.  Not even sure if they "lurk."
    "Say" it here -
    Product Feedback

  • Hands off calling from Macbook pro to iPhone 5 not connecting

    I cannot get my iMac to make a phone call using hands off through my iPhone. It continues to tell me they are not connected to the same Wi-Fi, and they are. I got it to work one time the day before after doing a soft reset on my iPhone. What can I do to correct this? All other features are working.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Since updating to 10.7.1 internet sharing between macbook pros via airport no longer works.

    Updated macbook pros to 10.7.1 and since then have trouble in sharing an ethernet internet connection to other devices by airport/wi-fi (ipod touch, iphone and other macbook). Any suggestions?

    Thanks mj - I'm up and running.
    I could get the dmg into the sidebar of disk utility but not mount it.
    Here's what I did. I booted in safe mode. That enabled me to mount the disk image for the combo update, but didn't fix the other problems.
    Installing the combo update fixed the problems I referred to - ie I can mount dmgs, use safari and the widgets work, even have my vpn back.
    It however reintroduced another problem - namely that I could not use any of the software for my canon eos 20d software - esp. the eos utility to download photos. This problem was previously fixed by loading iousbfamily-xxx as described in the discussions - I think this is basically an earlier version of the usb driver than the driver loaded with 10.4.7. Fearing that this may have caused the problem, it was with some trepidation that I tried it again.
    So far so good.
    Thanks very much for the time you've put in helping me - I'm very grateful. Not being a techo I swapped from PCs to MACs to get away from all the update/compatibility problems and I get very frustrated when things don't work.
    Peter

  • AirDrop between iPhone 6 plus (iOS 8.1) and MacBook Pro retina early 2013 not working

    Hi there,
        Can somebody please help me. I ent to transfer so videos that I have saved via airdrop To my MacBook pro from my iPhone 6plus.
    When I try to send via airdrop, neither my phone shows the MacBook as available not does my MacBook show that my phone is available to send/receive files via airdrop. I have wifi and Bluetooth activated. Please can somebody help? I can't email the files because they are too large for that.
    Thank you.

    Hey romeopatel,
    I see that you are experiencing some issues with AirDrop. I have an article with some information for you about what to do if your device is not appearing when attempting to AirDrop:
    Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices
    http://support.apple.com/kb/HT6510
    Don't see who you're looking for?
    When you select AirDrop, OS X looks for other Mac computers and devices that are nearby that also use AirDrop. If you don't see someone in the AirDrop window, here are some things to check.
    Preventing senders
    You can prevent people you don't know from sending you files, or you can allow everyone. If you don't see a recipient in the AirDrop window, they might only accept files from people who in their Contacts list. Ask them to add you in their Contacts app, or have them select the option "Allow me to be discovered by: Everyone" in the AirDrop window.
    Sending files to and from an older Mac
    If a Mac you're using with AirDrop was manufactured before 2012, you can send and receive files with other Mac computers.
    On the sending Mac, click "Don't see who you're looking for" in the AirDrop window.
    Select the option to "Search for an Older Mac."
    On the receiving Mac, open a new Finder window and click AirDrop in the sidebar.
    Tips for sending files
    Make sure Wi-Fi and Bluetooth are enabled on your Mac and your iOS device. Although you don't have to connect to a specific network, Wi-Fi needs to be on to send and receive files using AirDrop.
    Move your devices closer together. AirDrop is designed to work within a range of approximately 30 feet (9 meters). If you need to send a file to someone farther away, consider using File Sharing, iCloud, or email instead.
    If you're using a firewall on your Mac, you won't be able to receive AirDrop files if you have enabled "Block all incoming connections" in the Security & Privacy pane of System Preferences.
    Make sure your devices meet system requirements for AirDrop.
    System Requirements
    To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
    In order to transfer files between a Mac and and an iPhone, iPad or iPod touch, your iOS device needs iOS 7 or later installed and your Mac needs to be a 2012 or later model. To transfer files between two Mac computers, you need one of the Mac models listed below and OS X Lion or later.
    MacBook Pro (Late 2008 or newer)*
    MacBook Air (Late 2010 or newer)
    MacBook (Late 2008 or newer)*
    iMac (Early 2009 or newer)
    Mac Mini (Mid 2010 or newer)
    Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
    *The MacBook Pro (17-Inch Late 2008) and the white MacBook (Late 2008) do not support AirDrop.
    For help identifying your Apple product, choose About This Mac from the Apple menu, or refer to the Apple Support website.
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • SMS relay via Iphone 6 NOT working - why?

    Hey all.
    So I upgraded to Yosemite. Looks nice.
    The "receive calls on your Mac" feature works fine on both my MacBook Air and my iMac. Not sure how much I'll use it though.
    However, the function where you can send non iMessage texts via iMessage (i.e. regular SMS) is NOT working for some odd reason.
    I get the usual "red" on the name I'm trying to send a message to and an error pop-up that this person is not hooked up to iMessage.
    Shouldn't this just work? Or is there something I need to do tick off first?
    I can place calls on my iPhone 6 via my Macs just fine - it's just the SMS function that's not active for some reason.
    Hope someone can help - because this is a function I've really looked forward to and know I'll be using a LOT.
    Best,
    Jesper

    I saw somewhere else in the forums that this  feature would work as of iOS 8.1 due out Monday....  but honestly don't know if there's any basis to that...  it's just a couple of days... why don't you wait and install iOS 8.1 on your phone and then try again...

  • Macbook pro ipod nano does not work after plugging in

    I plugged in an iPod nano to my MacBook Pro which has two operating systems, one is OS and the other is Windows. I don't know which generation the iPod nano is. The PC side of the MacBook Pro is working but the OS side is not working. It allows me to login and then shows a blank white screen with the pointer cursor.
    The iPod nano was plugged in to add music from iTunes. I plugged it in, opened iTunes, and the iPod nano was not recognized on iTunes or on the computer in Finder. I unplugged the iPod nano and closed iTunes. When I opened iTunes again, it gave me an error and will not open iTunes again. I restarted the computer and this is when the OS side stopped working and the PC side continued to work. I was able to load OS in Safe Mode though.
    Does anyone have any suggestions? Please help. Thanks!

    I had the same issue...of course i went swimming with my iPod but still. If it is the battery that is giving you trouble then go back to your local apple store or call them. Ask what the most reliable place for iPod repair is. A second option (what I did) is to go into the iPod recycle program. They take your old iPod and either give you a discount on the new one of the same style or a discount on a new one of the 3rd gen. I recomend the first option if your iPod is unused.

  • Macbook Pro Keyboard and trackpad not working - SOLUTION!

    Recently my Macbook Pro of 3 years suddenly stopped working -- or at least the keyboard and track pad did. I plugged in an external USB mouse and and keyboard and was able to use it but it was of course cumbersome. Thinking it was a software issue like the one that used to happen to my old G4 desktop I reinstalled the OS but this did nothing but cause a lot of extra work. After doing a lot of hours of research I finally began reading that people were finding a solution by replacing their "topcase" (the topcase includes the keyboard and trackpad). This is a $300 fix and not knowing if it would even work I didn't want to try it and be wrong!
    To make a short story longer I found a website (which I have no affiliation with) called www.powerbookmedic.com who sold the cable only so you could do your own fix for about $35. They provide basic video but not an exact step by step to replace the actual cable -- just how to get to it.
    I will warn you that the components are tiny and I recommend buying the Mac tool kit and pry tool to help you through it. Even so I broke a small component but luckily it still works. In the end I now have a working Macbook Pro and some extra tools for the next time. I stripped a screw so had to spend another $15 and buying anti-static tape, although not necessary might be a good idea. Total cost to me was about $60 with tools and everything.
    It is not very hard to do the replacement but it is tricky because the components are so fragile and I did not have a video to properly describe how to open up connectors -- hence why I broke one. But if you are patient, savy and need to save a few bucks it can be done.
    PS- I have rebuilt desktop Mac's before but this was the first time I ever opened up a laptop. I used the video's provided at http://www.powerbookmedic.com/ as much as allowed.
    Good luck!

    No one cared enough to answer.

  • My Macbook Pro power adapter is not working

    I have had my MacBook Pro for less than 1 year and I only use it to get to Uni and back. I leave the adapter at home and unplug it when I'm not using it, but lately it has decided that it doesn't want to work and hence I cannot charge my laptop. Is there anything I can do other than spen $90 on a new charger?

    If your computer is still under warranty, so is the power adapter. Make an appointment at an Apple store or call AppleCare.

  • Help!!! thunderbolt port on macbook pro 10.6.8 not working

    Help!!!I have a macbook pro 10.6.8 version. I have been using my HDMI cord via the thunderbolt port to connect my laptop to my TV. I have been using it for 4 months when this week it stopped working. I have changed the HDMI and adaptors but have discovered its something to do with my laptop. Does anyone know how to fix this?

    Help!!!I have a macbook pro 10.6.8 version. I have been using my HDMI cord via the thunderbolt port to connect my laptop to my TV. I have been using it for 4 months when this week it stopped working. I have changed the HDMI and adaptors but have discovered its something to do with my laptop. Does anyone know how to fix this?

Maybe you are looking for

  • [SOLVED] can't play any multimedia file, fresh install msi wind

    hi! i have now a pretty much working system i installed mplayer and alsa, and have a working xorg, i configured alsa with alsaconf and it says that the card was found and i can now change levels with alsamixer the thing is that everytime a want to pl

  • Copy large videos from iphone 3gs to windows

    Hi, I have a large 750 mb video on my phone that I am trying to copy to the computer. I have tried using the camera and scanner wizard and copy/paste in windows explorer but neither of them works. It produces a 0kb file on the computer. I have been a

  • User should not be able to cancel Proforma invoice if Excise Invoice Exist

    Dear All ,                  I have a requirement that i have a performa invoice for which a excise invoice is created and then when i go to VF02 and check on Complete the i want to check whether the exicise invoice is cancelled or not . Can Anybody h

  • Full length region

    I have a question that I wonder if anybody has encountered before and can help me with. Is there any way to have full length region after your region has been set up? To be precise, I need to have a 'footer' region in my page. Yet my page already loo

  • Superscript in Photoshop Elements 10?

    Hello everyone, I need part of my text within a textbox to be superscript.  How can I accomplish this in Photoshop Elements 10? Thank you!