Continuous and Frequent Disconnects for last 4 days, 6pm-After Midnight

I've been experiencing multiple disconnections from "enhanced" DSL on a frequent basis the last few nights. I can tell while either using TV stream programs (such as Netflix) or using consoles requiring an internet connection to run certain features (XBOX). The disconnects occur at a rate of about once every ten minutes, and lasts for about 90 seconds each.
Though this may seem trivial it continues to increase in frustration when trying to use the internet for shopping, TV streaming, or gaming. I'm not sure what advantage I am getting paying extra for the "enhanced" DSL high speed internet, or if it is worth continuing my requested service from Verizon. The fact that the internet simply decides to stop working for 90 seconds every 10 minutes is slightly frustrating given I’m paying for an expected service. I understand this may be a local weather issue, but I have not received any messages from Verizon stating there is previous storm damage or on-going repairs in which I may suffer lack of stability.
It is not a wireless issue either. I have a computer hard-connected via CAT-V cable and on the Verizon provided wireless router I can clearly see the Internet light go out while the DSL and Power lights remain illuminated.
I imagine this is not common, and am hoping for troubleshooting beyond average technical knowledge. is there a short life span on the wireless router provided? Resetting the router will not fix this. I attempted a shutdown, unplug for 10 minutes, and restart of the provided router and the disconnects resumed as normal and scheduled. I also attempted replacing the phone and internet wires into the router. I am considering moving my service to one of the local competing companies, but prefer Verizon for the bundle deals with DirectTV.

It's an epidemic everywhere. I now feel it's to get people to move to FIOS. They are too cheap to upgrade their equipment for DSL service. We need to bond together and fight back.

Similar Messages

Select statement for last day of the last quarter and first quarter

Anybody provide me the single select statement which should result the last day of the last quarter and last day of current quarter?
Ex: Select last date of the last quarter,last day of current quarter from XYZ(DUAL...)
Thanks in Advance

Hi,
Here's one way:
SELECT               TRUNC (SYSDATE, 'Q') - 1     AS prev_qtr_end
,     ADD_MONTHS ( TRUNC (SYSDATE, 'Q') - 1
             , 3
             )                    AS this_qtr_end
FROM    dual;TRUNC (dt, 'Q') returns the first day of the quarter containing dt.
Subtract one day from that, and you have the last day of the previous quarter.
Add 3 months to that, and you have the last day of the current quarter. ADD_MONTHS (dt, n) will always return the last day of a month if its first argument, dt, is the last day of a month.

Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels. For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one .. Than

Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels.
For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one ..
Thank you for your attention.
Annalisa

Don't understand what you writing here. Screen shoots would be most helpful.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Query to get the details of Blocking and deadlock occurred for the Day

Hi,
I need a query to get the details of blocking and deadlock occurred for the day.

You havent specified which version of SQL you are using which makes it difficult to give a solution. Assuming its latest versions , by default SQL Server (in any versions) doesnt track blocking information.
You need to run some kind of queries/traces to capture blocking. The same goes with Deadlocks where majority of the DBA's enable trace flag 1222/1205 when they suspect deadlocks happening.
Check this link -
http://dba.stackexchange.com/questions/10644/deadlock-error-isnt-returning-the-deadlock-sql/10646#10646
This link gives code to get historic deadlock information. I havent used it , I just googled to get that.
That being said if you are looking for something to capture for the future check the below links.
Check these links on how to setup extended events to capture deadlock and blocking.
http://sqlblog.com/blogs/jonathan_kehayias/archive/2010/12/21/an-xevent-a-day-21-of-31-the-future-tracking-blocking-in-denali.aspx
http://blogs.msdn.com/b/sqlserverfaq/archive/2013/04/27/an-in-depth-look-at-sql-server-memory-part-2.aspx
http://blogs.technet.com/b/mspfe/archive/2012/06/28/how_2d00_to_2d00_monitor_2d00_deadlocks_2d00_in_2d00_sql_2d00_server.aspx
HTH
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

SR and RMA details for last 1 year

Hi All,
I need to download SR and RMA requests for last 1 year from my Company. What I am getting in PMC is for last quarter only. Please help.

Hello,
In order to view the SR and RMA requests for an entire year, you will need to download multiple reports. You can do this in the PMC scorecard page. There are 2 options to complete this:
1. Select the Quarter Month from the drop down and download the SR and RMA reports. You will need to select the quarter month option multiple times to receive 4 quarterly reports for each metric.
2. Select the below option on the bottom of PMC Scorecard
> request multiple reports
To make multiple selections,Ctrl-Click(Win) or Cmd-Click(mac).
Select Month(s): and Select Metric(s):
The reports will be emailed within 24 hours. You will need to combine all reports in order to have one year of data.
Regards,
Jill

Tap continue and sing in for billing information

I dont know why it keep saying tap continue and sing in for billing information and it wont let me download

Is there any error message you get when trying to sign in and provide the billing information?
Also try to:
1. Go to Settings > iTunes & App Stores > Tap on Apple ID and Sign out
2. Restart the device
3. Go to Settings > iTunes & App Stores > Sign in again

Automatically switches me to different apple store! I am using UAE store , but now it says I am using Singapore! But when I go to apple store and change it to UAE again , it charges 1 dhs and it work for the day. It behaves differently the next time ?

Automatically switches me to different apple store! I am using UAE store , but now it says I am using Singapore! But when I go to apple store and change it to UAE again , it charges 1 dhs and it work for the day. It behaves differently the next time ?

Where did you buy the iPad and register your iTunes account? What country is the credit card you used when you set up your iTunes account? Where are you now?
 Cheers, Tom

UDF for last day of week/month

Input is a Date(For example: 2010/03/12) in String format.
I need to extract the last day of that week and return it as a string output.
For example if input is 2010/03/12 and thatu2019s a Thursday my output should be 2010/03/14 i.e Saturdayu2019s date.
Similarly I need to extract last day of month too.
Thanks in advance
Soumen...

Hi,
I did not develop this one... but just use "search" button on roseindia and you will have the answer (I think):
[http://www.roseindia.net/java/beginners/DayOfYearToDayOfWeek.shtml|http://www.roseindia.net/java/beginners/DayOfYearToDayOfWeek.shtml]
and do not forget that Google is your friend...
do a research with : Java last day of week, and you have plenty of examples.
Thanks.
P.S: Say us when you will solved your problem.

G4 quicksilver won't start after disconnecting for 10 days.

Wemt on holiday for 10 days. Disconnected the mac from the wall. Just got back to find the start up button glows for a couple of seconds then dies. Is there a battery or something that has died. Any ideas?

Resetting the Logic Board
Resetting the logic board can resolve many system problems. Whenever you have a
unit that fails to power up, you should follow this procedure
before replacing any modules.
1 Unplug the computer.
2 Press the Power On button on the front of the unit.
3 Open the side access panel.
4 Remove the battery from the logic board.
5 Wait at least 10 minutes before replacing the battery.
6 Make sure the battery is installed in the correct +/-
direction.
7 Reassemble the computer and test the unit.
Note:
This procedure resets the computer’s PRAM. Be sure to
check the computer’s time/date and other system parameter settings
 Cheers, Tom

Dynamic Variable for last day of month

Hi all,
I have created one report where in YTD is calculated based on stsyem date. NOw in this report the cal month is in row thus displaying data month wise. But i need one key figure which giving the last day vaue of every month that are displayed in YTD i.e this is based on cal day. Thus the report layout is as follows:
if report is run in mar 2007 then it should display:
calmonth            key figure due amount
Jan 07                this should show due value on last day of jan 07 (i.e 31st jan 07)
Feb 07               this should show due value on last day of feb 07 (i.e 28th feb 07)
Mar 07               this should show due value on last day of mar 07(i.e 31st mar 07)
customer exit variable can give me only one value at a time. How can I make it dynamic to take last day value of every month as per cal month. Could anybody explain me if worked on any such issue.
If there is some how to paper kindly mail me at my email Id : [email protected]
thanks in advance
Regards,
Wrushali

Hi,
We can assign multiple single values to the customer exit.
So in the Query take CALMONTH in rows.
And take your KF in column with Customer exit variable restriction on CALDAY.
So in the code of this Cusotmer exit varible, from the Current date find out the year of the current date and then assign those 12 required days to this variable.
With rgds,
Anil Kumar Sharma .P

HT3916 When I order a movie from Apple TV for $4.99 I get charged $14.99 and it stays for 30 days instead of 24 hours - how do I change that setting?

Hi - I just got my new Apple TV setup - when I order a movie for $4.99 - I get charged $14.99, and instead of only staying for 24 hours, it now stays for 30 days - how do I change the setting so i'm only getting an overnight movie rental instead of buying it for 30 days?

Welcome to the Apple Community.
It sounds as though you have purchased it to me, does it actually say anything about 30 days.
Rentals will stay available for 30 days, but if you start watching them the 24/48 hour timer starts counting down. This is the standard rental model, there is no alternative.

I have an Adobe Acrobat install and it gets a error code 6 after one days use. Reinstall and irt works for a day. please help.

I am using windows 7 with all updates installes. I have Adobe Standard X and after install it will get an error code 6 and stop working. I reinstalkkl and it will work for a day.

Hello,
We are using windows 7 64-bit. Here is a screen shot of the error that we are getting. It is just this computer.
I have uninstalled and reinstalled the Adobe several times and it will work for the day and then get the error the next day.
I have the power options to never turn off hard disk and never sleep. Any help would be great.
Gary Lee | Senior IT Support Technician
p (949) 672.9081 | f (949) 672.9181
39 Argonaut, Suite 100 | Aliso Viejo, CA 92656
seabreezemgmt.com<http://www.seabreezemgmt.com> |
<https://www.facebook.com/SeabreezeManagement>
<https://twitter.com/seabreezemgmt>
<https://www.linkedin.com/company/seabreeze-management-company-inc.>
<https://www.youtube.com/user/SeabreezeManagement>

Variable for last day of last month....

Hi,
Can somebody let me know the code to find the last day of last month from the query variable.
Is there any standard/business content variable available for this?
I have found one similar variable , but its for the posting date.
Any help is appreciated.
Regards...

Check this code:
l_date_from = sy-datum.
       l_date_from+6(2) = '01'.
       l_date_from = l_date_from - 1.
       l_s_range-sign = 'I'.
       l_s_range-opt = 'EQ'.
       l_s_range-low = l_date_from.
       l_s_range-high = space.
       APPEND l_s_range TO e_t_range.
You can modify based on your specific requirement.
Regards,
Kams

External Disply flickers and went Black for a short duration after yosemite update 10.10.2

hi,
i got a mac book pro late 2008 and since todays update my external monitor flickers and went black for a short duration.
It seems that it happens, when i start a new app or i move a window across the displays.
Disabling the automated scaling of the resolution reduced the flickering but it still happens.
Does anyone faces the same problems and have an idea how to fix it?
I would appreciate it.
Sincerely
Lukas

Hello lukasfromholzwickede,
Thanks for participating in the Apple Support Communities.
It sounds like you've noticed flickering on your external display after updating OS X Yosemite.
I'd recommend starting with these resets to troubleshoot the situation:
You can reset the Mac's parameter RAM and SMC.
You can find these steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
If the behavior continues, try going through the steps in the "Update your software and firmware" and "No video or no signal, image distortion, 'snow,' or flickering" sections of this article, as well.
All the best,
Jeremy

Music and sounds folders not appearing under "music and sounds" tab for approx 5 min after launch

So every time I launch fcpx, under the "music and sounds" tab, all that is appearing is my iTunes folder, with the other folders (iLife sounds, FCP sound effects, etc) not appearing for about 5 min or so...anyone else experiencing this? Is there a fix?

Nothing ever shows up under the "Music and Sounds" tab for me. I can wait an hour and nothing "appears." The dropdown menu is blank and can never be used to select anything: It remains blank.
I've deleted preferences, rebooted, logged-in as a different user and reinstalled the application. None of that has made the "Music and Sound" section work.
If I drag a folder to the top area (after pulling down the gray bar) the icon changes to show a green plus sign and the top area is outlined with green. After dropping the folder nothing happens; it does not appear in the list. I've tried several different folders from iTunes and other locations, all to no avail.

Continuous and Frequent Disconnects for last 4 days, 6pm-After Midnight

Similar Messages

Maybe you are looking for