Continuous background sound and scenes
Ok, my problem is as follows:
I have a Flash MX file with several scenes. With the first
scene starts my soundtrack which is as long as the flash movie is
going to be. This is supposed to play throughout the whole movie
(and the scenes) without intteruption.
Now when the file is playing and scene 2 starts my background
will keep playing as wished, but on top of that a new instance of
the same sound will start playing. How do I get rif of this? Please
help, I'm lost!
I tried, but I just can't figure it. I am quite new to flash.
I have inserted the file (mp3) in the first frame of scene 1
of it's own layer.
My property settings are:
Tween: none
Effect: none
Sync: Start
Loop: 0 times
Similar Messages
-
I tried yesterday to get on my computer but when it began to power up it stopped showing a white screen while emitting a loud beep every 2 to 3 seconds and wouldnt stop. Anyone know what the deal is?
If you experience one of these beeps, you should call your Apple-authorized service provider for additional troubleshooting assistance.
1 beep = No RAM installed/detected
2 beeps = Incompatible RAM type installed (for example, EDO)
3 beeps = No RAM banks passed memory testing
4 beeps = Bad checksum for the remainder of the boot ROM
5 beeps = Bad checksum for the ROM boot block -
I am new to Apple, just bought the computer a month ago. I extraced this from the log file. I fear I've picked up some malware or been hacked...
Sep 9 19:27:48 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Got user: rochelle
Sep 9 19:27:48 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Got ruser: rochelle
Sep 9 19:27:48 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Got service: screensaver
Sep 9 19:27:48 Rochelles-iMac.local loginwindow[47]: in od_principal_for_user(): No authentication authority returned
Sep 9 19:27:48 Rochelles-iMac.local loginwindow[47]: in od_principal_for_user(): failed: 7
Sep 9 19:27:48 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Sep 9 19:27:48 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Done cleanup3
Sep 9 19:27:48 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Kerberos 5 refuses you
Sep 9 19:27:48 Rochelles-iMac.local loginwindow[47]: in pam_sm_acct_mgmt(): OpenDirectory - Membership cache TTL set to 1800.
Sep 9 19:27:48 Rochelles-iMac.local loginwindow[47]: in od_record_check_pwpolicy(): retval: 0
Sep 9 19:27:48 Rochelles-iMac.local loginwindow[47]: in od_record_attribute_create_cfstring(): returned 2 attributes for dsAttrTypeStandard:AuthenticationAuthority
Sep 9 19:27:48 Rochelles-iMac.local loginwindow[47]: in pam_sm_setcred(): Establishing credentials
Sep 9 19:27:48 Rochelles-iMac.local loginwindow[47]: in pam_sm_setcred(): Got user: rochellebrock
Sep 9 19:27:48 Rochelles-iMac.local loginwindow[47]: in pam_sm_setcred(): Context initialised
Sep 9 19:27:48 Rochelles-iMac.local loginwindow[47]: in pam_sm_setcred(): Got euid, egid: 501 20
Sep 9 19:27:48 Rochelles-iMac.local loginwindow[47]: in pam_sm_setcred(): Done getpwnam()
Sep 9 19:27:48 Rochelles-iMac.local loginwindow[47]: in pam_sm_setcred(): Done setegid() & seteuid()
Sep 9 19:27:48 Rochelles-iMac.local loginwindow[47]: in pam_sm_setcred(): pam_sm_setcred: krb5 user rochellebrock doesn't have a principal
Sep 9 19:27:48 Rochelles-iMac.local loginwindow[47]: in pam_sm_setcred(): Done cleanup3
Sep 9 19:27:48 Rochelles-iMac.local loginwindow[47]: in pam_sm_setcred(): Done seteuid() & setegid()
Sep 9 19:27:48 Rochelles-iMac.local loginwindow[47]: in pam_sm_setcred(): Done cleanup4
Sep 9 19:27:48 Rochelles-iMac.local configd[18]: network changed: v4(en0+:192.168.1.2) DNS+ Proxy+ SMB
Sep 9 19:27:49 Rochelles-iMac kernel[0]: en1: BSSID changed to 30:46:9a:9d:c0:b0
Sep 9 19:27:49 Rochelles-iMac kernel[0]: en1::IO80211Interface::postMessage bssid changed
Sep 9 19:27:49 Rochelles-iMac kernel[0]: AirPort: Link Up on en1
Sep 9 19:27:49 Rochelles-iMac kernel[0]: en1: BSSID changed to 30:46:9a:9d:c0:b0
Sep 9 19:27:49 Rochelles-iMac kernel[0]: en1::IO80211Interface::postMessage bssid changed
Sep 9 19:27:52 Rochelles-iMac kernel[0]: 109634.210104: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
Sep 9 19:27:52 Rochelles-iMac kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
Sep 9 19:27:52 Rochelles-iMac kernel[0]: en1::IO80211Interface::postMessage bssid changed
Sep 9 19:27:52 Rochelles-iMac kernel[0]: 109634.228243: setDISASSOCIATE ****STA SYNC DISASSOC SUCCESS
Sep 9 19:27:55 Rochelles-iMac kernel[0]: en1: BSSID changed to 30:46:9a:9d:c0:b0
Sep 9 19:27:55 Rochelles-iMac kernel[0]: en1::IO80211Interface::postMessage bssid changed
Sep 9 19:27:55 Rochelles-iMac kernel[0]: AirPort: Link Up on en1
Sep 9 19:27:55 Rochelles-iMac kernel[0]: en1: BSSID changed to 30:46:9a:9d:c0:b0
Sep 9 19:27:55 Rochelles-iMac kernel[0]: en1::IO80211Interface::postMessage bssid changed
Sep 9 19:27:58 Rochelles-iMac kernel[0]: 109640.221694: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
Sep 9 19:27:58 Rochelles-iMac kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
Sep 9 19:27:58 Rochelles-iMac kernel[0]: en1::IO80211Interface::postMessage bssid changed
Sep 9 19:27:58 Rochelles-iMac kernel[0]: 109640.239956: setDISASSOCIATE ****STA SYNC DISASSOC SUCCESS
Sep 9 19:28:00 Rochelles-iMac.local Google Chrome[10788]: Unsure about the internals of CFAllocator but going to patch them anyway. If there is a crash inside of CFAllocatorAllocate, please report it at http://crbug.com/117476 . If there is a crash and it is NOT inside of CFAllocatorAllocate, it is NOT RELATED. DO NOT REPORT IT THERE but rather FILE A NEW BUG.
Sep 9 19:28:00 Rochelles-iMac kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=10790[ksadmin] clearing CS_VALID
Sep 9 19:28:01 Rochelles-iMac.local Google Chrome Helper[10791]: Unsure about the internals of CFAllocator but going to patch them anyway. If there is a crash inside of CFAllocatorAllocate, please report it at http://crbug.com/117476 . If there is a crash and it is NOT inside of CFAllocatorAllocate, it is NOT RELATED. DO NOT REPORT IT THERE but rather FILE A NEW
This was found during the time I know the system was beeping:
Sep 9 20:24:40 Rochelles-iMac kernel[0]: TMCCFS 126 MSG handlePutExceptionPids exc_apps[0] == /Applications/TrendMicro.localized/SupportTool.app/Contents/MacOS/SupportTool
Sep 9 20:24:40 Rochelles-iMac kernel[0]: TMCCFS 126 MSG handlePutExceptionPids exc_apps[1] == /Applications/TrendMicro.localized/iTIS.app/Contents/MacOS/iTIS
Sep 9 20:24:40 Rochelles-iMac kernel[0]: TMCCFS 126 MSG handlePutExceptionPids exc_apps[2] == /Library/Application Support/TrendMicro/TmccMac/UIMgmt.app/Contents/MacOS/UIMgmt
Sep 9 20:24:40 Rochelles-iMac kernel[0]: TMCCFS 126 MSG handlePutExceptionPids exc_apps[3] == /Library/Application Support/TrendMicro/TmccMac/iCorePluginMgr
Sep 9 20:24:40 Rochelles-iMac kernel[0]: TMCCFS 126 MSG handlePutExceptionPids exc_apps[4] == /Library/Application Support/TrendMicro/TmccMac/iCoreService
Sep 9 20:24:40 Rochelles-iMac kernel[0]: TMCCFS 126 MSG handlePutExceptionPids exc_apps[5] == /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Support/mds
Sep 9 20:24:40 Rochelles-iMac kernel[0]: TMCCFS 126 MSG handlePutExceptionPids exc_apps[6] == /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Support/mdworker
Sep 9 20:24:40 Rochelles-iMac kernel[0]: TMCCFS 126 MSG handlePutExceptionPids exc_apps[7] == /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/Resources/dis kimages-helper
Sep 9 20:24:40 Rochelles-iMac kernel[0]: TMCCFS 126 MSG handlePutExceptionPids exc_apps[8] == /usr/sbin/syslogd
Sep 9 20:26:26 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Got user: rochelle
Sep 9 20:26:26 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Got ruser: rochelle
Sep 9 20:26:26 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Got service: screensaver
Sep 9 20:26:26 Rochelles-iMac.local loginwindow[47]: in od_principal_for_user(): No authentication authority returned
Sep 9 20:26:26 Rochelles-iMac.local loginwindow[47]: in od_principal_for_user(): failed: 7
Sep 9 20:26:26 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Sep 9 20:26:26 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Done cleanup3
Sep 9 20:26:26 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Kerberos 5 refuses you
Sep 9 20:26:26 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): OpenDirectory - The authtok is incorrect.
Sep 9 20:26:26 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Got user: rochelle
Sep 9 20:26:26 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Got ruser: rochelle
Sep 9 20:26:26 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Got service: screensaver
Sep 9 20:26:26 Rochelles-iMac.local loginwindow[47]: in od_principal_for_user(): No authentication authority returned
Sep 9 20:26:26 Rochelles-iMac.local loginwindow[47]: in od_principal_for_user(): failed: 7
Sep 9 20:26:26 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Sep 9 20:26:26 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Done cleanup3
Sep 9 20:26:26 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Kerberos 5 refuses you
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): OpenDirectory - The authtok is incorrect.
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Got user: rochelle
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Got ruser: rochelle
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Got service: screensaver
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in od_principal_for_user(): No authentication authority returned
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in od_principal_for_user(): failed: 7
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Done cleanup3
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Kerberos 5 refuses you
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): OpenDirectory - The authtok is incorrect.
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Got user: rochellebrock
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Got ruser: rochellebrock
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Got service: screensaver
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in od_principal_for_user(): No authentication authority returned
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in od_principal_for_user(): failed: 7
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Done cleanup3
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Kerberos 5 refuses you
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): OpenDirectory - The authtok is incorrect.
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Got user: rochellebrock
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Got ruser: rochellebrock
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Got service: screensaver
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in od_principal_for_user(): No authentication authority returned
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in od_principal_for_user(): failed: 7
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Done cleanup3
Sep 9 20:26:27 Rochelles-iMac.local loginwindow[47]: in pam_sm_authenticate(): Kerberos 5 refuses you
If anyone can help me I would greatly appreciate it. Thank you in advance. I am on an Intel iMac 10.8.1Since it's a new machine, contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine. That also might apply to newly bought ones inside the first 90 days.
FWIW, IMO, the AppleCare extended plan's the cheapest insurance you can get for your new desktop machine. -
Hi all --
Looking to attach a background sound and play it using
ActionScript. However, it's not working. I'm trying to link it up
to a button called "soundButton" that toggles the audio. I have the
wav file in my library, have exported it for ActionScript, and
given it a linkage ID of "music."
Also, if I trace after a button click, my "soundPlaying"
value is always "false." Any ideas?
See attached code below...any help is greatly
appreciated!bg_sound is undefined: use bg_sound or my_sound.
-
Starting about one month ago I have been hearing a background sound of a door opening or closing. When opening, it is the sound of a latch turning and then a creaking door sound, and when closing it is the sound of a slamming latch.It is intermittent, ocurring every 5-10 minutes or so when connected with Firefox. There is no apparent problem associated with sounds, I'm just wondering why it's happening and what it might mean.
Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
Can background sound be paused, then continue?
Hi All,
I was wondering if there is a way to have the background
sound stop playing in frames, say, 20 thru 40, then continue?
Any advice / bits of code is much appreciated! Couldn't find
such a trick anywhere.
Thanks,
VLAt frame 20 get the position of the sound and put it in a
variable before
stopping it:
var curPos = mySound.position / 1000; //convert to seconds
mySound.stop();
at frame 40, start the sound from the curPos variable:
mySound.start(curPos);
HTH
Dave -
Adobe Community Expert
www.blurredistinction.com
www.macromedia.com/support/forums/team_macromedia/ -
I cannot hear the vocals on downloaded movies on Apple TV.
I can hear the background music and sound effects only.
What can I do to fix this please?Most movies have Dolby surround sound. Seems like you don't have all sound channels coming out of your speakers.
Is the AppleTV connected to a receiver or to a TV?
If you have a receiver that supports dolby surround you should configure the sound settings of the Apple TV and receiver accordingly.
If it's connected to a TV the audio setting "Dolby Digital" in the Apple TV should be set to off. -
I have iphone5 ios6 and the Mic is too sensitive, and calls constantly cut in and out. People tell me there is loud background noise and it sounds like I'm in a wind tunnel. Any background noise, and call completely cuts in and out and sounds as if call is dropping. This occurs all the time, but more noticeable while using earphones with in cord mic. I never had this problem with my old iphone4. Has anyone experienced this, and is there a setting that can correct this problem?
Same problem for me. So bad in fact that I can't really use my headphones for calls. I have tried it with several sets of headphones. My primary are the Bang and Olufsen headphones which were great with the previous iphone 4 and 3.
Apple please address this issue. -
I have an iphone 4, when I plug in headphones I can pick up music and only background sounds, but no voices. It happens on every video or movie I see, but music works perfectly fine. Did anyone else have this problem or was it just me? If not can anyone help me?
Hey there Srkupo,
It sounds like your vocal audio is not working with your headphones connected to your iPhone. I would start with the troubleshooting from the following article to help troubleshoot them named:
Resolve issues with iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/ts2634
Update your software
Install the latest version of iOS. You can see which version is on your iPhone by going to the About screen.
If the device doesn't update successfully, the issue might be with your device and not the accessory. Learn how to check your iPhone, iPad, or iPod touch.
Disconnect and inspect the accessory, then restart your device
Disconnect the accessory and turn it off, if possible.
Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
Try a different device
Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
Restore iPhone, iPad, or iPod touch
Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
If this does not resolve the issue could you elaborate on where you are listening to this content from to help isolate the issue?
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Add A Constant Background Sound.
I'm a bit of an amature when it comes to web design and especially hard coding.Im getting to grips with div tags and the css dialoge box. I able to embed a sound file on a page but would like to know how to embed a background sound which keeps playing and doesnt restart every time you select a new page. Also any advice on how to add a sound on/off button option on each page would be appriciated.
ThanksContinuously playing music/sound on HTML websites is not a simple thing to do. You have the following options, each with their own set of problems.
OPTION #1 - Embed an MP3 player on a plain vanilla page. Invoke it to open in a Pop-Up window from a link on your home page. The player will remain open while people explore other site pages or until they close the pop-up window or leave your site. NOTE: The user must initiate the pop-up page by clicking a link. If you attempt to open the pop-up automatically on page load, it will be defeated by pop-up blockers (98% of browsers).
OPTION #2 - Put your player into a frameset. NOTE: Framed sites pose many other problems as detailed below.
http://apptools.com/rants/framesevil.php
OPTION #3 - Build your entire site with Flash. NOTE: Flash sites are not SEO & user friendly. Also Flash isn't supported by all web devices.
OPTION #4 - Build your entire site on one very large page
EXAMPLE: http://alt-web.com/TEST/ScrollTo.shtml
Depending on content, this could delay page load quite a bit.
OPTION #5 - Forget about continuous music/sound. Simply embed a player on the first page and let people hear it once.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
[Python pygame] Graphic equalizer - keeping sound and video in sync
Hi!
I'm writing a graphic equalizer in python and I want to use pygame for the video and audio output.
The video display of the moving bars works great, now that I have a correct way to read samples and decode them.
The problem now is: they're way out of sync with the audio playing in the background!
At the moment my code, that draws the bars basically looks like this:
# loop as long as we can get slice of the audio file for the fft
for n_frame in range(0, len(framebuffer), fftframesz):
clock.tick_busy_loop(t_loop)
# t_loop was defined as fftframesz over total_frame_count
# which means in words: t_loop is the amount of FFTs per second - or the cycles of THIS loop
# grab the frames and perform the fft here
...numpy.fft.fft...
# set the new bar heights and draw them
for bar in bars:
bar.update()
# if playback has not started yet, make it so
if not pygame.mixer.get_busy():
musicfile.play()
The way I'm thinking, this should be enough to keep sound and video in sync. Because we know the time that one cycle should take at most,
we can set the clock to tick_busy_loop this time. This way we make sure that the video is not faster than the sound.
But to me it seems that is is the other way round, i.e. that the video is slower than the sound. I already did some timing, but to no avail.
Is there perhaps a more easy, more elegant way to make sure that image and audio are in sync?
Any help is greatly appreciated!
Last edited by n0stradamus (2012-10-01 18:36:53)Thanks for your ideas. I assume you mean I should go with a $1200.00 final cut pro software. NOT.
Sure the video will be on myspace and youtube but wether they are noticed or not is not as important as self satisfaction. I can easily split scenes into equal time zones as I said. Then drag them into clips and back all using the same camcorder. Multiple cameras and angles would be nice but this can be done on a low budget and still look good. I guess my original questions were not answered. Is there a way to determine the length of a transition and shorten the clip by that amount. Or the length of a still shot and do the same. Or perhaps they have been answered and the answer is NO WAY, and I am just not hearing it.
I suppose reimporting a video would be great if I could use two timelines like in audio and then blank out what I don't want in the first. But I just don't think this is possible, or is it. I've been reading iMovie HD6 The Manual that should have been in the box. It's a help but doesn't take you from the beginning of a project to the final project. Exporting to imovie or idvd is not an issue. BTW I got the clips in sync as I said by leaving blank spots and placing effects over them. I could insert the proper length video in those spots but that can look silly without transitions. But then again so can transitions. This stuff is very fun and interesting and a great learning experience. If I stop now as you suggest then I am not pushing myself to the limit. But thanks for your reply. -
How to attach sound to any button?which will continue that sound.
Hi,
Am working on Flash cs5.Can anyone tell me how to attach sound to any button?which will play after click on button.this sound should play continue till 2-3 scenes ahead.Am working on project which has 3 button with diffrent sound.and the sound button contains some scene which has volume seter.I mean,if user want to hear that sound in slow,medium or high pitch.the code should set as per this.Its in as 2.
This site is like "karaoke".just the sound is classical music.It will continue on software and user will sing a song.
Can anyone help me?At working on this from last 2 months.and its hard for me to get perfect answer.Add your sound clip to the library and give it a Linkage ID of "mySoundClip"
Assume your button is in frame 1.
GIve your button the instance name of "mySoundBtn". And put this code on frame 1 (timeline).
stop();
mySoundBtn.onRelease = function () {
mySoundC = new Sound(this);
mySoundC.attachSound("mySoundClip");
mySoundC.start(0, 10); //10 represents the number of loops
gotoAndPlay(2);
than put this code on the timeline frame where you need the sounsd to stop.
stopAllSounds();
Also If you want to be able to play the sound from your local disk without attaching it to the swf, use .loadSound("the url", true); -
hello,
if i add a background sound to a captivate movie, i have the
following problem:
while playing, stoping and resuming the movie, the background
sound has the correct behaviour. but if i skip the movie by the
slider the sound doesn't skip. is there an option to synchronize
the background sound with the "timeline"? (not the timeline of a
single slide)
are there any other possible workarounds? in fact, the sound
sample i would like to use is a single file with speech comments. i
tried to chop the sound file, but this will not work for my
purposes.
i appreciate any suggestionsHi c_power and welcome to our community
You are misunderstanding the use of the background sound
feature. It was never intended to be used as a long continuous
narration track. Instead, it is intended to place a nice soft audio
clip that doesn't overwhelm narration.
Narration is intended to be placed on the slides and in
objects. I'd try opening slide one, then pressing the F6 key to
import the clip. Once you do this, you should see a dialog that
allows you to choose how to deal with the audio. Assuming the movie
is complete and the timings are all set as desired, choose the
bottom option labeled: Retain current timing and distribute this
file over several slides.
Hopefully this helps... Rick -
Qs about call FM in background task, and monitoring in SM37.
Hi, guys, i got a question here, if I call a FM using addition "in background task" in a Z program, does this mean the FM process is running in background? And can I monitor my task in sm37?
i've tried to do that, the FM was successfully proceeded, but I cannot see anything related to that task in SM37 under mine user ID.No, you cannot see that in SM37.
What it means is that the function is being executed in a seprated thread and the program that called the function will continue the execution without waiting for the function finish execution, that means the function is called in a synchronous manner.
Regards,
Ravi
Note : Please mark all the helpful answers -
I have been meaning to change my battery on my computer as it is completely dead and wont charge when plugged in. So this might be a problem but it is plugged into the adapter and it has been working fine the last few weeks, but all of a sudden this problem occured:
I accidentally unplugged my computer before shutting it down and it switched off automatically. When I tried to turn it on it would start, the chime sound could be heard a grey screen with the apple would appear for a couple of seconds and then the screen would go black and the computer would try to reboot again and the chime would sound and then go black and restart again, chime would play etc. It continues like this and wont do anything else. I can open the computer in safemode without a problem. Is this just a battery problem (even though it is plugged into the charger)? or do I have a hardware problem.
Also if I try to restart the SMC will this delete everything on my harddrive? I havent backed up everything and I dont have the means to back up (using safemode) at the moment. \Please help if you can. I am in a desperate situation at the moment.Given that it runs in Safe Mode, a reinstall may be overkill. But what the heck! A nuclear bomb CAN be successfully used to kill a mosquito...
Recovery Mode == Command R
Safe Mode == Shift
Maybe you are looking for
-
Is there a way to have my folders stored on my server instead of my desktop?
My server has multiple backup options whereas my workstation desktop does not. I would like to keep my folders on the server and not on my local drive. Is this possible? If not, can I keep Thunderbird on my sever and have more than one person logged
-
Do i really need a copy of mac os 9 to run the game starcraft on my powerbook g4 laptop running 10.4.11?
-
How to identify incoming URL in a web app?
I have a web app A with a link to another web application B. When I click on the link B (actually a servlet), it takes me to the new application. Is there a way I can tell where I came from? i.e. Is there a way to get the URL of the originating appli
-
Missing functions in Slideshow Editor?
I am (clearly) a novice Aperture user, and am struggling with the Slideshow Editor Default Settings set up. I would like to add text to various slides in a slideshow. BUT... I have looked through all the booklet and online help with regards to adding
-
Error RFC Adapter (as receiver)
Dear All, My scenario is: File --> XI --> RFC. I used RFC adapter as a receiver. I got checkered flag in SXMB_MONI, but i got following error in adapter monitoring: "com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message t