Continuous messages *dtlArpTask: osapi_sem.c:1179 Failed to acquire ..
Client have recently upgraded from 4402 WLC to 5508. They are now receiving a large number (100 000s a day) of warnings. Software Version is
7.5.102.0
2013-09-09 00:00:02 Local0.Warning 10.61.183.17 ausowlc1: *rmgrMain: Sep 09 00:00:02.769: #OSAPI-4-MUTEX_LOCK_FAILED: osapi_sem.c:1179 Failed to acquire a mutual exclusion object. invalid(NULL) pointer passed.
I have found related bug CSCui55350/ CSCuh41790
CSCui55350/ CSCuh41790
Continuous messages *dtlArpTask: osapi_sem.c:1179 Failed to acquire ..
Symptom:
Continuous messages:
-Traceback: 0x10c31374 0x10c8a6a4 0x10c9ea08 0x10c94748 0x10c402d8 0x12283850 0x122f634c
*rmgrMain: Aug 08 09:49:21.902: #OSAPI-5-MUTEX_UNLOCK_FAILED: osapi_sem.c:1036 Failed to release a mutual exclusion object. invalid(NULL) pointer passed.
-Traceback: 0x10c30d9c 0x10c8a7f4 0x10c9ecf8 0x10c95d4c 0x10c402d8 0x12283850 0x122f634c
*rmgrMain: Aug 08 09:49:21.902: #OSAPI-4-MUTEX_LOCK_FAILED: osapi_sem.c:1179 Failed to acquire a mutual exclusion object. invalid(NULL) pointer... more
Conditions:
AP in flex mode, 7.5 in use
Workaround:
None
Further Problem Description:
Details:
Known Affected Releases: (3)
7.5(102.0) | 7.5(1.69) | 7.4(100.0)
Known Fixed Releases: 0
Release Pending
Product: Cisco 5500 Series Wireless Controllers
Status of this bug is fixed but known fixed releases are 0. Please advise if this software bug and/or hardware failure and what is best workaround ?
Any help would be appreciated.
Hi Michael,
This error is seen due to a setting the dev team has disabled on the WLC and are expected to be fixed in 7.6. These messages are just cosmetic and have no impact.
Workaround at this point is :
These are warning messages displayed on the console. Instead of enabling warnings, errors can be enabled. So that it does not flood the console.
Kunal
Similar Messages
-
Hi my iphone 5 is on recovery mode and I connect it with the computer but it's failing to restore the device the message is showing iphone restore failed!!!!!
Hi Bobi1346,
Thank you for visiting Apple Support Communities and for including the error number you are getting.
There's an article for troubleshooting that error.
iOS: Restore errors 4005, 4013, and 4014
Try these steps to resolve the issue:
Install the latest version of iTunes.
Restart your computer.
Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
Learn more about updating OS X.
Learn more about updating Windows.
Restore using another USB cable.
Restore your device on another computer.
If you continue to see error 4005, 4013, or 4014 when you restore your device, contact Apple for support.
Take care,
Nubz -
I have tried to upgrade Painter 11 on my iMac running OS x 10.5.8 but get the error message : The following install step failed : run pre install script for Corel Painter11_SP1. Contact the software manufacturer for assistance "
I have contacted Corel and after several emails and one telephone call, they tell me , they cannot help but they think the problem could be with the OS.
Does anyone have any suggestions, please ?Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward. -
Updating iphone 4 to iOS 5 - while doing the Backup I receive an error message no 402636788 - backup has failed. Can anybody tell me what this means or how I can fix this?
I am working on a Win 7 Machine and I have disabled all Firewall and Antivirus Tasks as this caused problems on an other update.Well - I synced before - that was successful - but I am a bit scared to ignore this error and just to continue? You think I should ignore that?
-
cannot open pictures in Window 8.1...getting message 'the remote procedure call failed". What is the solution?
I recently bought a new HP computuer and uploaded Window 8.1. I then transfered photo files from old computer to new computer using a portable storage drive.
When trying to view the photos, a message pops up showing a file path...and the message 'the remote procedure call failed'. Photos are in jpeg format.
Please let me know what I can do to view photos?What program you use to view these photos? Choose another app to view these photos
for a test.
This issue only occurred when you view photo? What is the result if we connect the
portable storage drive to other computer (if possible)?
Run sfc/scannow to check and fix if there are some missing or corrupted system files.
Check the event viewer to see the detailed information of this issue.
Regards
Yolanda
TechNet Community Support -
My CEO has an ipad2 and I set it up w/ AOL. She cannot send any email via her AOL account from her iPad. She gets a message that says "A copy has been placed in your Outbox. Sending the message content to the server failed." We've tried it on wifi and on 3G (Verizon version). I've removed the account and added it, I've tried setting it up as an IMAP account vs. using Apples standard AOL mail setting and nothing seems to work. The SMTP settings are smtp.aol.com, port 587. I've tried adding an alternate server/smtp, but I haven't been able to find anything that works. Any advice or other people having this issue? It works fine sending an email from her aol web mail. And unfortunately, having her sign up for a gmail account is not an option. Thanks
Interesting. Firstly I have been on AOL since the early 90s with no current intention to switch as my primary personal email account.
I have two email accounts on my iphone - AOL and my email from my business website. I deleted both and then recreated first the business account and then the AOL account. Same error. Then I wasn't sure what you suggested but I turned off the AOL SMTP server and selected the business email SMTP server by turning it on with the same result. I still get the error "A Copy has been placed in your Outbox. Sending the mssage content to the server failed."
Perhaps this problem will get fixed by IOS 6. AOL will not talk to me unless I pay and Apple says its not their problem. So for the time being I use the AOL web interface in the iPhone's Safari to send emails from the phone. -
I am unable to receive or send email from my IPAD. The error message says "Connection to server failed". Help!! geandreamer44
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
If nothing above helped, restart your router.
No data is lost due to a reset. -
I went through all the steps to try to resolve getting the message in a box every time i try to send an e-mail. What next ?
Message is " A copy has been placed in your
Outbox. Sending the message content to the server failed."
Any assistance would be greatly appreciated. My internet works fine as I can send e-mails from my Yahoo account on my MAC no problem.
Address is fine etc.How long has it been going on? I've had my yahoo mess up and if i wait a bit it resolves itself. Yahoo is doing something with their servers and it messes with your mail if your mail happens to be on one of those servers.
-
Normal update of iTunes to 11.1.4 fails. Suggests installing from web site
I install from iTunes.com. Install issues the messages:
Service "Apple Mobile Device' failed to start.
Verify that you have sufficient privileges to start system services
I do have necessary privilegs. I hit ignore. See window with successful install come up and finish with launch. I get the messages:
iTunes was not installed correctly.
Please reinstall iTunes
Error 7 (Windows error 126)
Tring to start iTunes from desktop gives:
This application failed to start because MSVCR80.dll was not found
Re-installing the application may fix the problem.
Further repair or remove/reinstall does not fix the problem (including after reboot)
Thie is the first time this has happened. I'm not sure where to go from here
Thanks for any help.Earlier suggestion worked. That is, Use software add/remove to delete all 5 iTunes applications:
Apple Application Support
Apple Mobile Device Support
Aple Sortware Update
Bonjour
iTunes
Reboot and install/ -
I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message “Service ’Apple Mobile Device’ failed to start, verify that you have sufficient Privileges to start system Services”
On pressing retry I got the same message.
On pressing Ignore, I got the message “ITunes was not installed correctly, please reinstall ITunes – Error 7 – (windows error 126)
I reinstalled with the same error messages and the same results.
I uninstalled existing and reinstalled from scratch and the same error messages again.
I try to repair and at the end it said it had installed correctly – but when it tried to start I got the message “This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem” I now get the same message when I first start the computer but when I press ok I receive ““ITunes was not installed correctly; please reinstall ITunes – Error 7 – (windows error 126)” again.
It appears the update has not only corrupted the operating system (Xp Pro SP3) of my computer but I have no backups to my IPhone, my wife’s IPhone or the three others phones that use my computer.
I hope you can advise me how to recover my backupsHi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
I am trying to install my downloaded flash player on my new MacPro hard drive. I get the continual message that my I.D. and password are wrong. I know they are not wrong and have tried a lot of combinations from old Macs and old passwords too. Nothing works. How can I get the job done?
Hi,
On Mac, this password prompt is presented by your operating system, and is intended to keep you from accidentally installing software which can harm your system. Flash Player does not throw this prompt, Apple does that.
Please provide machine credentials of currently logged in User to continue with the installation.
Hope this helps.
Thanks
Piyush -
Hi Support,
I am becoming anxious because no matter what I try it doesnt seem to allow me to open itunes.
Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.
I have re-installed, SO many times and I still cant open iTunes.
Please help!!Click here and follow the instructions.
(98888) -
Error message: "Logging into the account failed because an error occurred."
Hello,
We had an XServe G5 2.0 DP 5GB/80/2x250 running Mac OS X 10.3.9 Server with all updates as a main server for a school. The server provides Open Directory Master as well as File-Sharing (AFP and SMB) and e-mail services to about 30 teachers and 300 students. The user home directories reside on the server. A web server also runs on the machine. The students use a pool of laptops, which are configured with a local guest and admin account as well as access to the server-based home directories with Directory Access. The server had the OS running on the 80 GB hard drive and all data (Home directories, mail database, website, etc. were on the two mirrored 250 GB drives.) All was working well until...
A few weeks ago, one of the two 250 GB died. We decided to use the opportunity to upgrade the server and set it up with 3 x 750 GB, two drives running as a mirrored pair to hold OS AND Data, the other as a stand-by unit to help replace a failing drive.
We migrated the OS and all data from the previous drives without a problem. Since now, all data is residing on one pair of drives, we put the data from the old "Data" drive in a folder on the root level of the new HD pair. We wrote a script that launches at startup which creates the symlink in /Volumes/Data to link to /Data. We thought that with this, all would be well.
However: When any user tries to log into his account from any iBook (10.3.9 or 10.4.11) (wirelessly), he gets the message:
"Logging into the account failed because an error occurred. The home folder for the user account is located on an afp or smb server. contact your system administrator for help"
If the user logs in to the guest account on the iBook, then accesses his home directory via file-sharing, he can see (read/write) all his data. So, the data and privileges seem to be OK, as well as Open Directory working correctly. Mail and the web work well also, as does logging in to a user account from one of the PC's (wired).
Can anyone make any suggestions as to how to fix the situation? Currently, the users are using the guest accounts and accessing their data via filesharing, as well as using webmail for their e-mail, but this is a major nuisance.
Any help will be greatly appreciated.
Best regards,
Alain Chammas
A user trying to access his account from a PC (wired) has no problems.A good number of folks are having problems with this same error message at login, and nobody seems to have found a fix.
I believe I have stumbled upon, if not a solution, at least part of the answer. If you're logged into a 10.4 workstation, open a Finder window and click the "Network" icon. The first time you do this, you'll only see "Library" and "Servers" icons, but if you let it sit for a moment, other folders will magically appear. One of these is "My Network" which is the critical part.
In Workgroup Manager, edit one of your users' home directory configuration. There's a URL piece, usually "afp://server.domain.com/Users" (which is what shows up in the window when you click on the "Home" tab for that user), and then there's a "Home" path that is usually something like "/Network/Servers/servername/Users/username". Trouble is, you've noticed that 10.4 doesn't put servers into the "Servers" path, but rather into the "My Network" path.
So, if you change that "Home" path to read "/Network/My Network/servername/Users/username", it should work--with one caveat. Apparently 10.4 doesn't create the "My Network" path on a given client until you actually browse the network on that client. If you haven't logged into a 10.4 workstation and browsed the network, the "My Network" path won't be there, and you'll still get the error. Login as a local user, browse the network (so that the "My Network" folder shows up), logout, and then login as an Open Directory user, and it should work.
I'm betting that 10.3, 10.4, and 10.5 all handle this issue differently, so if you're in a mixed-version situation, you may have to experiment to find a workable fix.
Derndest thing I ever saw. -
Why can't I print a pdf in Acrobat Pro? I keep getting the message "initialization of rasteurization module failed". What does that mean and how do I fix that?
This is an Acrobat error ("Initialization of the rasterizer module failed.") but it is has never been reported before that I can see.
Let's start with the basics.
- What version of Acrobat Pro
- What system
- What printer
- Does it happen with other printers?
- Does it happen with all files? -
I recently upgraded toSnow Leopard, after that I was given a continual message that I had to reinstall my Internet Cleanup. So I did. Then I turned my computer off and now it will not turn on at all. Help!
See if your Mac will boot from the install DVD.
Then uninstall Internet Cleanup.
Allan
Maybe you are looking for
-
Hello! I have created some PDF files and tagged them using the Document Properties dialog box of Acrobat X Pro (File> Properties). But when I view the properties of the file in Windows, I don't see these tags in the Details tab. Searching for help on
-
After a recent crash with my DinoPowerBook I had to reinstall CS2
And of course, CS2 is no longer supported. I downloaded this version: Download Acrobat 7 and CS2 products Which says Acrobat is present; however, its not in the CS2 Installer list (see below) How do I install Acrobat 7 (Professional for Mac) form thi
-
Adobe PDF 9.0 says it needs updated.
I have the CS4 Master collection. I did an update. I even reinstalled Acrobat. I can not print to the adobe PDF printer...It says this: You need to install software to use this printer. To install the software, choose Software Update from the Apple m
-
Hello again... Okay, here's the scoop: I'm building some websites which will be expanding in size over the coming months and years. Right now I have a footer with copyright info, it's text controlled ny an external style sheet. Works lovely. So let's
-
Database design with some tables with EAV format
We are designing a database in which most tables follow a straight relational design. Some tables, however, would benefit from an entity-attribute-value structure. Specifically, we want to be able to add new value categories simply by adding a row i